Add VITURE XR controls, head tracking, and SteamVR (#732)

* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

---------

Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
221 files changed
+24369 -491

No files matched your search

+117
View File
@@ -1,5 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<resources>
<string name="steamvr_recovery_title">SteamVR graphics stopped</string>
<string name="steamvr_recovery_countdown">DroidDeck will restart in %1$d seconds to reset graphics and reopen SteamVR. Your running game will close; unsaved progress cannot be restored.</string>
<string name="steamvr_recovery_repeated">The graphics fault returned after a recent restart. Automatic recovery is paused to prevent a loop. Restarting will close your game; unsaved progress cannot be restored.</string>
<string name="steamvr_recovery_restart">Restart now</string>
<string name="steamvr_recovery_cancel">Keep open</string>
<string name="steamvr_recovery_restarting">Resetting graphics and reopening SteamVR…</string>
<string name="steamvr_recovery_failed">DroidDeck could not restart automatically. Close the app completely, then reopen it.</string>
<string name="app_name">DroidDeck</string>
<string-array name="loading_hints">
<item>First run downloads Steam. This may take a few minutes.</item>
@@ -962,6 +969,8 @@
<string name="ctrl_keyboard_button">Keyboard button</string>
<string name="ctrl_select_steam">Press Select to open the Steam menu</string>
<string name="ctrl_select_steam_hint">Instead of View/Select.</string>
<string name="ctrl_joycon_vr">Joy-Cons as VR controllers</string>
<string name="ctrl_joycon_vr_hint">While SteamVR runs, each Joy-Con becomes a hand. Point it ahead and hold Home or Capture to recenter it.</string>
<string name="setup_animations">Animations</string>
<string name="ctrl_adaptive_hint">Sticks appear where you touch and hide on release</string>
<string name="ctrl_layout">Layout</string>
@@ -1019,6 +1028,7 @@
<string name="content_linux_desktop_hint">KDE Plasma, Firefox and your emulators</string>
<string name="games_empty">Games you install in Steam show up here after the session.</string>
<string name="games_play_steam">Play Steam</string>
<string name="games_play_steamvr">Play SteamVR</string>
<string name="games_launch_settings">Launch settings</string>
<string name="games_launch">Launch</string>
<string name="games_files">Game files</string>
@@ -2354,6 +2364,113 @@
<string name="stores_sync_gog_unreachable">Couldn\'t reach GOG</string>
<string name="stores_sync_gog_unreadable">Could not read your GOG library</string>
<string name="stores_registering">Registering with Steam…</string>
<string name="drawer_page_glasses">Glasses</string>
<string name="glasses_open">VITURE glasses</string>
<string name="glasses_control">Glasses control</string>
<string name="glasses_driver_missing">This build does not include the driver for these glasses.</string>
<string name="glasses_connection_failed">Could not connect to the glasses. Reconnect the cable or tap Allow to retry.</string>
<string name="glasses_allow">Allow</string>
<string name="glasses_allow_hint">Let DroidDeck set the glasses\' refresh rate, 3D mode, brightness, volume and sunblock, and read their head tracking.</string>
<string name="glasses_asking">Waiting for you to allow it in Android\'s prompt…</string>
<string name="glasses_denied">Control was declined. Allow it to change the glasses\' settings.</string>
<string name="glasses_no_control">These glasses show the game, but their settings can\'t be changed from here.</string>
<string name="glasses_output">Output</string>
<string name="glasses_status">%1$d×%2$d · %3$d Hz · %4$s</string>
<string name="glasses_mode_2d">2D</string>
<string name="glasses_mode_3d">3D</string>
<string name="glasses_game_on">Game on glasses</string>
<string name="glasses_game_on_hint">Show the game only on the glasses. Off: the phone shows it and Android mirrors the phone.</string>
<string name="glasses_display">Display</string>
<string name="glasses_refresh">Refresh rate</string>
<string name="glasses_3d">3D (side-by-side)</string>
<string name="glasses_3d_hint">Each eye gets its own half of a 3840×1080 picture. If the picture drops out, hold the glasses\' 2D/3D button.</string>
<string name="glasses_3d_failed">The 3D signal was not confirmed. Try again once the 2D picture returns.</string>
<string name="glasses_no_signal">No picture: the glasses are in a mode this phone can\'t send. Hold their 2D/3D button, or unplug and replug them.</string>
<string name="glasses_3d_refresh">3D refresh rate</string>
<string name="glasses_auto3d">3D for VR games</string>
<string name="glasses_auto3d_hint">Switches to 3D while SteamVR runs, and back after.</string>
<string name="glasses_picture">3D picture</string>
<string name="glasses_picture_hint">Automatic: SteamVR fills the view; other games hang as a screen in 3D and stay flat in 2D.</string>
<string name="glasses_picture_auto">Automatic</string>
<string name="glasses_picture_screen">Virtual screen</string>
<string name="glasses_picture_sbs">Side-by-side game</string>
<string name="glasses_screen_size">Screen width</string>
<string name="glasses_screen_distance">Screen distance</string>
<string name="glasses_screen_next_session">Width and distance apply when a game runs on the glasses as a virtual screen.</string>
<string name="glasses_screen_no_output">These settings apply while Game on glasses is enabled and the game is displayed there.</string>
<string name="glasses_screen_flat_hint">Automatic keeps this 2D game full-screen. Use a virtual screen to adjust its width, distance and head tracking.</string>
<string name="glasses_screen_use">Use virtual screen</string>
<string name="glasses_screen_direct_hint">SteamVR fills the view. Adjust its field of view below; width and distance apply only to a virtual screen.</string>
<string name="glasses_screen_sbs_hint">Side-by-side games fill each eye. Width and distance apply only to a virtual screen.</string>
<string name="glasses_tracking_flat_hint">Automatic keeps this 2D game fixed in view. Choose Virtual screen in Display to use head tracking.</string>
<string name="glasses_tracking_sbs_hint">Head tracking applies to a virtual screen or a running SteamVR game.</string>
<string name="glasses_hardware">Glasses</string>
<string name="glasses_brightness">Brightness</string>
<string name="glasses_volume">Volume</string>
<string name="glasses_sunblock">Sunblock</string>
<string name="glasses_sunblock_hint">Darkens the front lenses.</string>
<string name="glasses_tracking">Head tracking</string>
<string name="glasses_head_tracking">Head tracking</string>
<string name="glasses_head_tracking_hint">The glasses\' own sensors turn the virtual screen and SteamVR with your head.</string>
<string name="glasses_recenter">Recenter view</string>
<string name="glasses_recenter_button">Recenter</string>
<string name="glasses_vr_fov">SteamVR field of view</string>
<string name="glasses_vr_fov_hint">Lower brings SteamVR closer and fills the glasses; higher shows more around you.</string>
<string name="glasses_playing">Playing on %1$s</string>
<string name="glasses_calibration">Tracking calibration</string>
<string name="glasses_calibration_hint">Reduce drift and align the level reference.</string>
<string name="glasses_calibration_saved_hint">Saved calibration is applied to these glasses.</string>
<string name="glasses_calibration_open">Calibrate</string>
<string name="glasses_calibration_instructions">Place the connected glasses upside down on a level surface, with the frame resting evenly. Tap Start, then leave them untouched for about 8 seconds. Movement restarts the measurement. This adjusts drift and tilt, not heading.</string>
<string name="glasses_calibration_settling">Leave the glasses upside down and untouched. Waiting for them to settle…</string>
<string name="glasses_calibration_collecting">Measuring the sensors. Keep the glasses still.</string>
<string name="glasses_calibration_moving">Movement detected. Leave the glasses untouched; measurement will restart automatically.</string>
<string name="glasses_calibration_turn_over">Rest the glasses upside down on a level surface. Measurement will start when they are positioned correctly.</string>
<string name="glasses_calibration_complete">Calibration saved. Put the glasses on and look straight ahead, then tap Done to recenter.</string>
<string name="glasses_calibration_failed">Calibration could not finish. Check the connection and keep the glasses still, then try again. Your previous calibration is unchanged.</string>
<string name="glasses_calibration_start">Start</string>
<string name="glasses_calibration_done">Done</string>
<string name="glasses_calibration_reset">Reset tracking calibration</string>
<string name="glasses_calibration_reset_hint">Remove the saved calibration and restore the model defaults? Recenter after putting the glasses back on.</string>
<string name="glasses_calibration_reset_button">Reset</string>
<string name="hand_camera_group">Hand tracking</string>
<string name="hand_camera_prompt_title">Track your hands with the camera?</string>
<string name="hand_camera_prompt_body">The camera can see your hands. With no controller connected, your bare hands become the VR hands: pinch your thumb and index finger to click, close your hand to grab, and turn your palm toward you and pinch to open the menu. With Joy-Cons, it puts them where your hands really are. Pictures are processed on this device and never saved or sent.</string>
<string name="hand_camera_rear">Back camera</string>
<string name="hand_camera_rear_hint">Recommended. Usually sharper and wider.</string>
<string name="hand_camera_front">Front camera</string>
<string name="hand_camera_front_hint">For when the back of the device can\'t face you.</string>
<string name="hand_camera_allow">Use camera</string>
<string name="hand_camera_not_now">Not now</string>
<string name="hand_camera_setting">Camera hand tracking</string>
<string name="hand_camera_setting_hint">With no controller connected, your hands become the VR hands: pinch to click, palm toward you and pinch for the menu. With Joy-Cons, it places them where the camera sees them. Pictures stay on this device.</string>
<string name="hand_camera_choice">Camera</string>
<string name="hand_camera_access">Camera access</string>
<string name="hand_camera_access_hint">Allow camera access so hand tracking can start.</string>
<string name="hand_camera_access_denied">Camera access is off. Turn it on in Android settings.</string>
<string name="hand_camera_allow_button">Allow</string>
<string name="hand_camera_open_settings">Open settings</string>
<string name="hand_camera_placement">Camera placement</string>
<string name="hand_camera_placement_hint">Check that the camera can see you before you play.</string>
<string name="hand_camera_check">Check</string>
<string name="hand_camera_check_title">Camera placement</string>
<string name="hand_camera_how_rear">Stand the device up 1.5 to 2 metres away at about chest height, with the back camera facing you. Then step into view with your hands out.</string>
<string name="hand_camera_how_front">Stand the device up 1.5 to 2 metres away at about chest height, with the screen facing you. Then step into view with your hands out.</string>
<string name="hand_camera_starting">Starting the camera…</string>
<string name="hand_camera_stand_up">The device is lying flat. Stand it up so the camera faces you.</string>
<string name="hand_camera_upright">Stand the device more upright so the camera faces you.</string>
<string name="hand_camera_not_seen">Can\'t see you yet. Step into view so your head and shoulders show.</string>
<string name="hand_camera_move_back">Step back a little.</string>
<string name="hand_camera_move_closer">Come a little closer.</string>
<string name="hand_camera_show_hands">Hold both hands out where the camera can see them.</string>
<string name="hand_camera_good">Looks good.</string>
<string name="hand_camera_failed">The camera couldn\'t start. Close other apps that use it and try again.</string>
<string name="hand_camera_switch">Switch camera</string>
<string name="hand_camera_skip">Skip</string>
<string name="hand_camera_done">Done</string>
<string name="glasses_xreal_network_missing">Waiting for the glasses’ USB Ethernet connection. This phone may not expose it to apps.</string>
<string name="glasses_xreal_connection_failed">The XREAL connection was interrupted or returned an unsupported response. Retrying…</string>
<string name="glasses_xreal_experimental">Experimental 1S support. Use Follow mode and disable stabilization in the glasses menu. Tracking directions and display modes still need device testing.</string>
<string name="display_picture_position">Picture position</string>
<string name="display_position_top">Top</string>
<string name="display_position_bottom">Bottom</string>