Add VITURE XR controls, head tracking, and SteamVR (#732)

* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

---------

Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
221 files changed
+24369 -491

No files matched your search

+117
View File
@@ -1,5 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<resources>
<string name="steamvr_recovery_title">SteamVR-grafikken stoppede</string>
<string name="steamvr_recovery_countdown">DroidDeck genstarter om %1$d sekunder for at nulstille grafikken og åbne SteamVR igen. Dit kørende spil lukkes; ikke-gemte fremskridt kan ikke gendannes.</string>
<string name="steamvr_recovery_repeated">Grafikfejlen opstod igen efter en nylig genstart. Automatisk gendannelse er sat på pause for at undgå en løkke. Genstart lukker dit spil; ikke-gemte fremskridt kan ikke gendannes.</string>
<string name="steamvr_recovery_restart">Genstart nu</string>
<string name="steamvr_recovery_cancel">Hold åben</string>
<string name="steamvr_recovery_restarting">Nulstiller grafikken og åbner SteamVR igen…</string>
<string name="steamvr_recovery_failed">DroidDeck kunne ikke genstarte automatisk. Luk appen helt, og åbn den så igen.</string>
<string name="app_name">DroidDeck</string>
<string-array name="loading_hints">
<item>Den første start downloader Steam. Det kan tage nogle minutter.</item>
@@ -935,6 +942,8 @@
<string name="ctrl_keyboard_button">Tastaturknap</string>
<string name="ctrl_select_steam">Tryk på Select for at åbne Steam-menuen</string>
<string name="ctrl_select_steam_hint">I stedet for View/Select.</string>
<string name="ctrl_joycon_vr">Joy-Cons som VR-controllere</string>
<string name="ctrl_joycon_vr_hint">Mens SteamVR kører, bliver hver Joy-Con en hånd. Peg den fremad, og hold Home eller Capture nede for at centrere den igen.</string>
<string name="setup_animations">Animationer</string>
<string name="ctrl_adaptive_hint">Sticks vises, hvor du rører skærmen, og skjules, når du slipper</string>
<string name="ctrl_layout">Layout</string>
@@ -992,6 +1001,7 @@
<string name="content_linux_desktop_hint">KDE Plasma, Firefox og dine emulatorer</string>
<string name="games_empty">Spil, du installerer i Steam, vises her efter sessionen.</string>
<string name="games_play_steam">Spil Steam</string>
<string name="games_play_steamvr">Spil SteamVR</string>
<string name="games_launch_settings">Startindstillinger</string>
<string name="games_launch">Start</string>
<string name="games_files">Spilfiler</string>
@@ -2305,6 +2315,113 @@
<string name="stores_sync_gog_unreachable">Kunne ikke oprette forbindelse til GOG</string>
<string name="stores_sync_gog_unreadable">Dit GOG-bibliotek kunne ikke læses</string>
<string name="stores_registering">Registrerer hos Steam…</string>
<string name="drawer_page_glasses">Brille</string>
<string name="glasses_open">VITURE-brille</string>
<string name="glasses_control">Brillestyring</string>
<string name="glasses_driver_missing">Denne build indeholder ikke driveren til denne brille.</string>
<string name="glasses_connection_failed">Kunne ikke oprette forbindelse til brillen. Sæt kablet i igen, eller tryk på Tillad for at prøve igen.</string>
<string name="glasses_allow">Tillad</string>
<string name="glasses_allow_hint">Lad DroidDeck indstille brillens opdateringshastighed, 3D-tilstand, lysstyrke, lydstyrke og solafskærmning og aflæse dens hovedsporing.</string>
<string name="glasses_asking">Venter på, at du tillader det i Androids dialogboks…</string>
<string name="glasses_denied">Styring blev afvist. Tillad den for at ændre brillens indstillinger.</string>
<string name="glasses_no_control">Brillen viser spillet, men dens indstillinger kan ikke ændres herfra.</string>
<string name="glasses_output">Udgang</string>
<string name="glasses_status">%1$d×%2$d · %3$d Hz · %4$s</string>
<string name="glasses_mode_2d">2D</string>
<string name="glasses_mode_3d">3D</string>
<string name="glasses_game_on">Spil på brillen</string>
<string name="glasses_game_on_hint">Vis kun spillet på brillen. Fra: telefonen viser det, og Android spejler telefonen.</string>
<string name="glasses_display">Skærm</string>
<string name="glasses_refresh">Opdateringshastighed</string>
<string name="glasses_3d">3D (side-by-side)</string>
<string name="glasses_3d_hint">Hvert øje får sin egen halvdel af et billede på 3840×1080. Forsvinder billedet, så hold brillens 2D/3D-knap inde.</string>
<string name="glasses_3d_failed">3D-signalet blev ikke bekræftet. Prøv igen, når 2D-billedet er tilbage.</string>
<string name="glasses_no_signal">Intet billede: brillen er i en tilstand, som telefonen ikke kan sende. Hold dens 2D/3D-knap inde, eller tag stikket ud og sæt det i igen.</string>
<string name="glasses_3d_refresh">3D-opdateringshastighed</string>
<string name="glasses_auto3d">3D til VR-spil</string>
<string name="glasses_auto3d_hint">Skifter til 3D, mens SteamVR kører, og tilbage bagefter.</string>
<string name="glasses_picture">3D-billede</string>
<string name="glasses_picture_hint">Automatisk: SteamVR fylder synsfeltet; andre spil svæver som en skærm i 3D og forbliver flade i 2D.</string>
<string name="glasses_picture_auto">Automatisk</string>
<string name="glasses_picture_screen">Virtuel skærm</string>
<string name="glasses_picture_sbs">Side-by-side-spil</string>
<string name="glasses_screen_size">Skærmbredde</string>
<string name="glasses_screen_distance">Skærmafstand</string>
<string name="glasses_screen_next_session">Bredde og afstand gælder, når et spil kører på brillen som virtuel skærm.</string>
<string name="glasses_screen_no_output">Disse indstillinger gælder, mens Spil på brillen er slået til, og spillet vises der.</string>
<string name="glasses_screen_flat_hint">Automatisk holder dette 2D-spil i fuld skærm. Brug en virtuel skærm for at justere bredde, afstand og hovedsporing.</string>
<string name="glasses_screen_use">Brug virtuel skærm</string>
<string name="glasses_screen_direct_hint">SteamVR fylder hele billedet. Juster synsfeltet nedenfor; bredde og afstand gælder kun for en virtuel skærm.</string>
<string name="glasses_screen_sbs_hint">Side-by-side-spil fylder hvert øje. Bredde og afstand gælder kun for en virtuel skærm.</string>
<string name="glasses_tracking_flat_hint">Automatisk holder dette 2D-spil fast i synsfeltet. Vælg Virtuel skærm under Skærm for at bruge hovedsporing.</string>
<string name="glasses_tracking_sbs_hint">Hovedsporing gælder for en virtuel skærm eller et kørende SteamVR-spil.</string>
<string name="glasses_hardware">Brille</string>
<string name="glasses_brightness">Lysstyrke</string>
<string name="glasses_volume">Lydstyrke</string>
<string name="glasses_sunblock">Solafskærmning</string>
<string name="glasses_sunblock_hint">Gør de forreste glas mørkere.</string>
<string name="glasses_tracking">Hovedsporing</string>
<string name="glasses_head_tracking">Hovedsporing</string>
<string name="glasses_head_tracking_hint">Brillens egne sensorer drejer den virtuelle skærm og SteamVR med dit hoved.</string>
<string name="glasses_recenter">Centrer visning</string>
<string name="glasses_recenter_button">Centrer</string>
<string name="glasses_vr_fov">SteamVR-synsfelt</string>
<string name="glasses_vr_fov_hint">Lavere bringer SteamVR tættere på og fylder brillen; højere viser mere omkring dig.</string>
<string name="glasses_playing">Spiller på %1$s</string>
<string name="glasses_calibration">Sporingskalibrering</string>
<string name="glasses_calibration_hint">Mindsker drift og justerer den vandrette reference.</string>
<string name="glasses_calibration_saved_hint">Gemt kalibrering anvendes på denne brille.</string>
<string name="glasses_calibration_open">Kalibrer</string>
<string name="glasses_calibration_instructions">Læg den tilsluttede brille på hovedet på en vandret flade, så stellet hviler jævnt. Tryk på Start, og lad den derefter ligge urørt i ca. 8 sekunder. Bevægelse starter målingen forfra. Dette justerer drift og hældning, ikke retning.</string>
<string name="glasses_calibration_settling">Lad brillen ligge urørt på hovedet. Venter på, at den falder til ro…</string>
<string name="glasses_calibration_collecting">Måler sensorerne. Hold brillen i ro.</string>
<string name="glasses_calibration_moving">Bevægelse registreret. Lad brillen ligge urørt; målingen starter automatisk forfra.</string>
<string name="glasses_calibration_turn_over">Læg brillen på hovedet på en vandret flade. Målingen starter, når den ligger korrekt.</string>
<string name="glasses_calibration_complete">Kalibrering gemt. Tag brillen på, se lige frem, og tryk så på Udført for at centrere.</string>
<string name="glasses_calibration_failed">Kalibreringen kunne ikke gennemføres. Tjek forbindelsen, hold brillen i ro, og prøv igen. Din tidligere kalibrering er uændret.</string>
<string name="glasses_calibration_start">Start</string>
<string name="glasses_calibration_done">Udført</string>
<string name="glasses_calibration_reset">Nulstil sporingskalibrering</string>
<string name="glasses_calibration_reset_hint">Vil du fjerne den gemte kalibrering og gendanne modellens standardværdier? Centrer, når du har taget brillen på igen.</string>
<string name="glasses_calibration_reset_button">Nulstil</string>
<string name="hand_camera_group">Håndsporing</string>
<string name="hand_camera_prompt_title">Spor dine hænder med kameraet?</string>
<string name="hand_camera_prompt_body">Kameraet kan se dine hænder. Uden tilsluttet controller bliver dine bare hænder til VR-hænderne: knib tommel- og pegefinger sammen for at klikke, luk hånden for at gribe, og vend håndfladen mod dig og knib for at åbne menuen. Med Joy-Cons placerer det dem, hvor dine hænder virkelig er. Billeder behandles på denne enhed og gemmes eller sendes aldrig.</string>
<string name="hand_camera_rear">Bagkamera</string>
<string name="hand_camera_rear_hint">Anbefales. Som regel skarpere og bredere.</string>
<string name="hand_camera_front">Frontkamera</string>
<string name="hand_camera_front_hint">Til når enhedens bagside ikke kan vende mod dig.</string>
<string name="hand_camera_allow">Brug kamera</string>
<string name="hand_camera_not_now">Ikke nu</string>
<string name="hand_camera_setting">Håndsporing med kamera</string>
<string name="hand_camera_setting_hint">Uden tilsluttet controller bliver dine hænder til VR-hænderne: knib for at klikke, vend håndfladen mod dig og knib for menuen. Med Joy-Cons placeres de, hvor kameraet ser dem. Billeder bliver på denne enhed.</string>
<string name="hand_camera_choice">Kamera</string>
<string name="hand_camera_access">Kameraadgang</string>
<string name="hand_camera_access_hint">Tillad kameraadgang, så håndsporing kan starte.</string>
<string name="hand_camera_access_denied">Kameraadgang er slået fra. Slå den til i Android-indstillingerne.</string>
<string name="hand_camera_allow_button">Tillad</string>
<string name="hand_camera_open_settings">Åbn indstillinger</string>
<string name="hand_camera_placement">Kameraplacering</string>
<string name="hand_camera_placement_hint">Tjek, at kameraet kan se dig, før du spiller.</string>
<string name="hand_camera_check">Tjek</string>
<string name="hand_camera_check_title">Kameraplacering</string>
<string name="hand_camera_how_rear">Stil enheden op 1,5 til 2 meter væk i cirka brysthøjde med bagkameraet vendt mod dig. Træd så ind i billedet med hænderne ude.</string>
<string name="hand_camera_how_front">Stil enheden op 1,5 til 2 meter væk i cirka brysthøjde med skærmen vendt mod dig. Træd så ind i billedet med hænderne ude.</string>
<string name="hand_camera_starting">Starter kameraet…</string>
<string name="hand_camera_stand_up">Enheden ligger fladt. Stil den op, så kameraet vender mod dig.</string>
<string name="hand_camera_upright">Stil enheden mere lodret, så kameraet vender mod dig.</string>
<string name="hand_camera_not_seen">Kan ikke se dig endnu. Træd ind i billedet, så hoved og skuldre ses.</string>
<string name="hand_camera_move_back">Træd lidt tilbage.</string>
<string name="hand_camera_move_closer">Kom lidt tættere på.</string>
<string name="hand_camera_show_hands">Hold begge hænder ud, hvor kameraet kan se dem.</string>
<string name="hand_camera_good">Ser godt ud.</string>
<string name="hand_camera_failed">Kameraet kunne ikke starte. Luk andre apps, der bruger det, og prøv igen.</string>
<string name="hand_camera_switch">Skift kamera</string>
<string name="hand_camera_skip">Spring over</string>
<string name="hand_camera_done">Udført</string>
<string name="glasses_xreal_network_missing">Venter på brillens USB-Ethernet-forbindelse. Denne telefon gør den muligvis ikke tilgængelig for apps.</string>
<string name="glasses_xreal_connection_failed">XREAL-forbindelsen blev afbrudt eller returnerede et svar, der ikke understøttes. Prøver igen…</string>
<string name="glasses_xreal_experimental">Eksperimentel understøttelse af 1S. Brug Follow-tilstand, og slå stabilisering fra i brillens menu. Sporingsretninger og visningstilstande mangler stadig test på enheden.</string>
<string name="cardboard_title">Cardboard VR</string>
<string name="cardboard_mode">Cardboard-tilstand</string>
<string name="cardboard_mode_hint">Billeder til venstre og højre øje til en VR-brille til telefonen.</string>