mirror of
https://github.com/Droid-Deck/DroidDeck.git
synced 2026-11-21 13:55:58 +00:00
Add VITURE XR controls, head tracking, and SteamVR (#732)
* Add VITURE glasses support: hardware control, 3D, head tracking Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page. * Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs * Hang the glasses Settings lip over the top of the button * Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses * Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top * Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad * Let the pad hands reach a metre out so buttons with deep colliders press * Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters * Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad * Glasses: SteamVR field of view defaults to 90° * VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand * Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's * Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam * Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end * Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs * Harden VITURE stereo negotiation and output refresh tracking * Localize stereo recovery feedback and record Astra reconnect tests * Improve test failure diagnostics and refresh Astra firmware findings * Handle VITURE docks separately and reject truncated USB frames * Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes - A 3D attempt that ends at the 640x480 fallback is remembered for that glasses model, so Play SteamVR no longer blacks out the glasses after every restart; Retry clears it and "3D for VR games" stays reachable - A VITURE Mobile Dock on its own no longer counts as glasses; through a dock Play SteamVR is hidden and the sheet shows the output and why there is no control - HDR is probed on the glasses when the session starts there - Glasses frames with a mismatched checksum are marked in the status frame log - SteamVR layer and driver vblank counters stay monotonic across refresh changes; one-eye render scale applies from activation and on mono/3D switches - Compositor binds announce the refresh clients were last told; the presenter retries a failed first swapchain - Dead strings and helpers removed; docs updated * Glasses: drop USB frames with a bad checksum * Glasses: count frames dropped for a bad checksum * Feat/viture xr (#907) * Add RayNeo Air and GT support to the XR glasses pipeline * Add RayNeo Air and GT support to the XR glasses pipeline * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Add XREAL 1S support and correct GT and Pro 2 tracking * Add XREAL 1S support and correct GT and Pro 2 tracking * Fix mirrored glasses tracking and recover SteamVR after device loss * Fix mirrored glasses tracking and recover SteamVR after device loss * Document confirmed XREAL 1S brightness control * Document confirmed XREAL 1S brightness control * Fix SteamVR glasses defaults and rendering controls * Fix SteamVR glasses defaults and rendering controls * chore: keep only the 3 newest session log folders (#852) * chore: add agent comment rules (#748) Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * fix: wireless ADB page names the child-process switch the way Android shows it (#848) * l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850) * l10n: refresh stale and untranslated strings in es, fr, ko, ru - mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales). - wincomp_needs_installer / wincomp_installers_note: es and ko still described the old "coming soon" behaviour; align with the current English text. - summary_remove_game: was still English in all four locales. Machine-assisted translation; native-speaker review is welcome. * l10n(es): say registro, not grabación, for the missing installer record --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * fix: a failed cloud save recovery no longer ends the app (#846) The cloud-recovery thread started at every app start had nothing to catch an error, so one went to CrashHandler, which halts the process with status 2. In unit tests the thread can outlive the test that started it, fail on the torn-down preferences, and take the whole test run down. The error is now logged and the thread ends. Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> * fix: an interrupted Linux runtime download resumes instead of starting again (#847) * fix: an interrupted Linux runtime download resumes instead of starting again installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file. * test: Downloader resumes a cut-off download from the bytes it kept Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes. * fix: a resumed download discards a 206 that does not start where the kept bytes end Downloader appended every 206 response to the partial file without looking at Content-Range. A server or proxy that answers a Range request with a different offset would leave a corrupt file. Check that the range starts at the kept length; otherwise delete the partial file and start again without a Range header. Adds a test with a server that answers the Range request from offset 0. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849) * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome. * l10n: correct missing active swap translations --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: droiddeckctl reaches variant-package builds (recover #842) (#854) fix: droiddeckctl reaches builds shipped under a variant package The provider authority and the start Activity's component were fixed to com.droiddeck.launcher, so droiddeckctl could not talk to the antutu, ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE now picks the package; the Activity's class name stays the same in every variant. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * feat: droiddeckctl reports on-screen pacing (recover #843) (#855) feat: droiddeckctl pacing reports the frames that reached the screen Reads SurfaceFlinger's timestats for the game's layer (or the session's SurfaceView) over a capture: frames on screen, fps on screen, the present-to-present histogram and how many intervals were off the usual cadence. Records split by a refresh-rate change are summed. A game's own fps counter counts frames handed over, so it can't show dropped or doubled frames. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * fix: Steam can restart more than twice in a session (#754) * fix: Steam can restart more than twice in a session Every exit 42 counted toward the cap that stops an update which will not install, and the count was never cleared, so the third restart of a session ended it however far apart they were. A client that ran for a minute before asking is not that loop: the count starts again. * fix: measure the client's run time as it exits The time spent collecting logs and checking FEX after the client exits counted toward its run, so a slow cleanup could make a quick exit 42 look like a long one and clear the count. --------- Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * fix: the front end keeps its page when the Fold is folded or unfolded (#832) * fix: the front end keeps its page when the Fold is folded or unfolded MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose. * fix: store login keeps rebuilding its toolbar when the display density changes StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * Release pointer buttons without replaying stale motion (#803) * Fix cursor warping on native touch down * Preserve input cleanup without replaying stale pointer motion --------- Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> * l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539) * l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja) The stores, cloud saves, Windows components, Steam touch, desktop removal and background-downloads strings landed after #284's translation snapshot, so every one of them fell back to English. Translate all 184 into Simplified Chinese, Traditional Chinese (Taiwan and Hong Kong) and Japanese, keeping each locale file's own vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定). Also fix four Hong Kong strings that kept the simplified 着色器. * l10n(zh): fix stale and ambiguous strings found in review Severe: summary_remove_game was untranslated English in all three files; mode_added_art_hint, wincomp_installers_note and wincomp_needs_installer still described the pre-#480/#492 English. Also: distinguish the Setup wizard from Android system settings in zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as 收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the re-applied-at-launch, action-failed and already-in-Games strings, and play as 執行/開啟遊戲 in zh-TW/zh-HK. * l10n(ja): fix stale and ambiguous strings found in review --------- Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * Rebuild and verify Windows VR runtime components * Rebuild and verify Windows VR runtime components * Add top, bottom, and centered picture positions for Steam sessions (#871) * fix: dependency scan ignores folders above the game folder (#859) * DroidDeck-Proton: get releases from the Droid-Deck org repo DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton (11-9.1 is Latest there), so the Components page, the update check and the guest installer read releases from the org repo instead of The412Banner's. * feat: low-latency controller and touch toggles in the session drawer (#808) * fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876) * feat: Steam home wall fills from the signed-in library instead of store picks (#878) * test: cover GPU family and support classification (#880) * Fix local builds on Linux failing after the first Comet build (#866) * feat: sort the store library and installed tabs, and switch between card and list views (#798) * feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782) * fix: keep Quest-patched Turnip as the auto default (#853) * Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864) * fix: keep proot sessions alive when the kernel loses fork events (#457) * fix(quest): correct desktop and Steam display corruption across sessions (#733) fix(quest): stabilize desktop and Steam layer presentation Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted. Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result. Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: keep SteamVR syscall hooks and report Steam crashes (#905) * fix: preserve SteamVR syscall hooks * fix: report Steam crashes through gamescope * fix: honor glasses pacing and resolution in SteamVR launches --------- Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com> * Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture * Translate the glasses calibration, XREAL and SteamVR recovery strings * SteamVR recovery: give a finished teardown time to collect logs before restarting * Credit the projects the XR glasses support builds on * Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise * Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected * Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves - Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates) - MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con - No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field - SteamVR safe mode cleared before each start so one crash no longer blocks the driver --------- Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com> Co-authored-by: informalTechCode <informaltechyt@gmail.com> Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
221 files changed
+24369
-491
No files matched your search
@@ -1,5 +1,12 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<resources>
|
||||
<string name="steamvr_recovery_title">Τα γραφικά του SteamVR σταμάτησαν</string>
|
||||
<string name="steamvr_recovery_countdown">Το DroidDeck θα κάνει επανεκκίνηση σε %1$d δευτερόλεπτα για να επαναφέρει τα γραφικά και να ανοίξει ξανά το SteamVR. Το παιχνίδι που εκτελείται θα κλείσει· η μη αποθηκευμένη πρόοδος δεν μπορεί να ανακτηθεί.</string>
|
||||
<string name="steamvr_recovery_repeated">Το σφάλμα γραφικών επανεμφανίστηκε μετά από πρόσφατη επανεκκίνηση. Η αυτόματη ανάκτηση τέθηκε σε παύση για να αποφευχθεί ατέρμονος βρόχος. Η επανεκκίνηση θα κλείσει το παιχνίδι σας· η μη αποθηκευμένη πρόοδος δεν μπορεί να ανακτηθεί.</string>
|
||||
<string name="steamvr_recovery_restart">Επανεκκίνηση τώρα</string>
|
||||
<string name="steamvr_recovery_cancel">Να μείνει ανοιχτό</string>
|
||||
<string name="steamvr_recovery_restarting">Επαναφορά γραφικών και εκ νέου άνοιγμα του SteamVR…</string>
|
||||
<string name="steamvr_recovery_failed">Το DroidDeck δεν μπόρεσε να κάνει αυτόματη επανεκκίνηση. Κλείστε εντελώς την εφαρμογή και ανοίξτε την ξανά.</string>
|
||||
<string name="app_name">DroidDeck</string>
|
||||
<string-array name="loading_hints">
|
||||
<item>Η πρώτη εκτέλεση κάνει λήψη του Steam. Αυτό μπορεί να διαρκέσει μερικά λεπτά.</item>
|
||||
@@ -935,6 +942,8 @@
|
||||
<string name="ctrl_keyboard_button">Κουμπί πληκτρολογίου</string>
|
||||
<string name="ctrl_select_steam">Πατήστε Select για να ανοίξετε το μενού Steam</string>
|
||||
<string name="ctrl_select_steam_hint">Αντί για View/Select.</string>
|
||||
<string name="ctrl_joycon_vr">Joy-Con ως χειριστήρια VR</string>
|
||||
<string name="ctrl_joycon_vr_hint">Όσο εκτελείται το SteamVR, κάθε Joy-Con γίνεται χέρι. Στρέψτε το μπροστά και κρατήστε πατημένο το Home ή το Capture για να το επανακεντράρετε.</string>
|
||||
<string name="setup_animations">Κινήσεις</string>
|
||||
<string name="ctrl_adaptive_hint">Οι μοχλοί εμφανίζονται όπου αγγίζετε και εξαφανίζονται όταν αφήνετε</string>
|
||||
<string name="ctrl_layout">Διάταξη</string>
|
||||
@@ -992,6 +1001,7 @@
|
||||
<string name="content_linux_desktop_hint">KDE Plasma, Firefox και οι προσομοιωτές σας</string>
|
||||
<string name="games_empty">Τα παιχνίδια που εγκαθιστάτε στο Steam εμφανίζονται εδώ μετά τη συνεδρία.</string>
|
||||
<string name="games_play_steam">Αναπαραγωγή Steam</string>
|
||||
<string name="games_play_steamvr">Αναπαραγωγή SteamVR</string>
|
||||
<string name="games_launch_settings">Ρυθμίσεις εκκίνησης</string>
|
||||
<string name="games_launch">Εκκίνηση</string>
|
||||
<string name="games_files">Αρχεία παιχνιδιού</string>
|
||||
@@ -2305,6 +2315,113 @@
|
||||
<string name="stores_sync_gog_unreachable">Δεν ήταν δυνατή η σύνδεση με το GOG</string>
|
||||
<string name="stores_sync_gog_unreadable">Δεν ήταν δυνατή η ανάγνωση της βιβλιοθήκης σας στο GOG</string>
|
||||
<string name="stores_registering">Εγγραφή στο Steam…</string>
|
||||
<string name="drawer_page_glasses">Γυαλιά</string>
|
||||
<string name="glasses_open">Γυαλιά VITURE</string>
|
||||
<string name="glasses_control">Έλεγχος γυαλιών</string>
|
||||
<string name="glasses_driver_missing">Αυτό το build δεν περιλαμβάνει το πρόγραμμα οδήγησης για αυτά τα γυαλιά.</string>
|
||||
<string name="glasses_connection_failed">Δεν ήταν δυνατή η σύνδεση με τα γυαλιά. Συνδέστε ξανά το καλώδιο ή πατήστε «Να επιτρέπεται» για νέα προσπάθεια.</string>
|
||||
<string name="glasses_allow">Να επιτρέπεται</string>
|
||||
<string name="glasses_allow_hint">Επιτρέπει στο DroidDeck να ρυθμίζει τον ρυθμό ανανέωσης, τη λειτουργία 3D, τη φωτεινότητα, την ένταση ήχου και τη σκίαση των γυαλιών, και να διαβάζει την παρακολούθηση κεφαλιού τους.</string>
|
||||
<string name="glasses_asking">Αναμονή για την έγκρισή σας στο παράθυρο του Android…</string>
|
||||
<string name="glasses_denied">Ο έλεγχος απορρίφθηκε. Επιτρέψτε τον για να αλλάξετε τις ρυθμίσεις των γυαλιών.</string>
|
||||
<string name="glasses_no_control">Αυτά τα γυαλιά δείχνουν το παιχνίδι, αλλά οι ρυθμίσεις τους δεν μπορούν να αλλάξουν από εδώ.</string>
|
||||
<string name="glasses_output">Έξοδος</string>
|
||||
<string name="glasses_status">%1$d×%2$d · %3$d Hz · %4$s</string>
|
||||
<string name="glasses_mode_2d">2D</string>
|
||||
<string name="glasses_mode_3d">3D</string>
|
||||
<string name="glasses_game_on">Παιχνίδι στα γυαλιά</string>
|
||||
<string name="glasses_game_on_hint">Εμφανίζει το παιχνίδι μόνο στα γυαλιά. Ανενεργό: το δείχνει το τηλέφωνο και το Android κατοπτρίζει την οθόνη του τηλεφώνου.</string>
|
||||
<string name="glasses_display">Οθόνη</string>
|
||||
<string name="glasses_refresh">Ρυθμός ανανέωσης</string>
|
||||
<string name="glasses_3d">3D (δίπλα-δίπλα)</string>
|
||||
<string name="glasses_3d_hint">Κάθε μάτι παίρνει το δικό του μισό μιας εικόνας 3840×1080. Αν η εικόνα χαθεί, κρατήστε πατημένο το κουμπί 2D/3D των γυαλιών.</string>
|
||||
<string name="glasses_3d_failed">Το σήμα 3D δεν επιβεβαιώθηκε. Δοκιμάστε ξανά μόλις επανέλθει η εικόνα 2D.</string>
|
||||
<string name="glasses_no_signal">Δεν υπάρχει εικόνα: τα γυαλιά είναι σε λειτουργία που αυτό το τηλέφωνο δεν μπορεί να στείλει. Κρατήστε πατημένο το κουμπί 2D/3D τους ή αποσυνδέστε τα και συνδέστε τα ξανά.</string>
|
||||
<string name="glasses_3d_refresh">Ρυθμός ανανέωσης 3D</string>
|
||||
<string name="glasses_auto3d">3D για παιχνίδια VR</string>
|
||||
<string name="glasses_auto3d_hint">Μεταβαίνει σε 3D όσο εκτελείται το SteamVR και επιστρέφει μετά.</string>
|
||||
<string name="glasses_picture">Εικόνα 3D</string>
|
||||
<string name="glasses_picture_hint">Αυτόματο: το SteamVR γεμίζει το οπτικό πεδίο· τα άλλα παιχνίδια αιωρούνται ως οθόνη στο 3D και μένουν επίπεδα στο 2D.</string>
|
||||
<string name="glasses_picture_auto">Αυτόματο</string>
|
||||
<string name="glasses_picture_screen">Εικονική οθόνη</string>
|
||||
<string name="glasses_picture_sbs">Παιχνίδι δίπλα-δίπλα</string>
|
||||
<string name="glasses_screen_size">Πλάτος οθόνης</string>
|
||||
<string name="glasses_screen_distance">Απόσταση οθόνης</string>
|
||||
<string name="glasses_screen_next_session">Το πλάτος και η απόσταση ισχύουν όταν ένα παιχνίδι εκτελείται στα γυαλιά ως εικονική οθόνη.</string>
|
||||
<string name="glasses_screen_no_output">Αυτές οι ρυθμίσεις ισχύουν όσο είναι ενεργό το «Παιχνίδι στα γυαλιά» και το παιχνίδι εμφανίζεται εκεί.</string>
|
||||
<string name="glasses_screen_flat_hint">Το «Αυτόματο» κρατά αυτό το παιχνίδι 2D σε πλήρη οθόνη. Χρησιμοποιήστε εικονική οθόνη για να ρυθμίσετε το πλάτος, την απόσταση και την παρακολούθηση κεφαλιού.</string>
|
||||
<string name="glasses_screen_use">Χρήση εικονικής οθόνης</string>
|
||||
<string name="glasses_screen_direct_hint">Το SteamVR γεμίζει όλη την εικόνα. Ρυθμίστε το οπτικό του πεδίο παρακάτω· το πλάτος και η απόσταση ισχύουν μόνο για εικονική οθόνη.</string>
|
||||
<string name="glasses_screen_sbs_hint">Τα παιχνίδια δίπλα-δίπλα γεμίζουν το πεδίο κάθε ματιού. Το πλάτος και η απόσταση ισχύουν μόνο για εικονική οθόνη.</string>
|
||||
<string name="glasses_tracking_flat_hint">Το «Αυτόματο» κρατά αυτό το παιχνίδι 2D σταθερό στο οπτικό πεδίο. Επιλέξτε «Εικονική οθόνη» στην ενότητα «Οθόνη» για να χρησιμοποιήσετε παρακολούθηση κεφαλιού.</string>
|
||||
<string name="glasses_tracking_sbs_hint">Η παρακολούθηση κεφαλιού ισχύει για εικονική οθόνη ή για παιχνίδι SteamVR που εκτελείται.</string>
|
||||
<string name="glasses_hardware">Γυαλιά</string>
|
||||
<string name="glasses_brightness">Φωτεινότητα</string>
|
||||
<string name="glasses_volume">Ένταση ήχου</string>
|
||||
<string name="glasses_sunblock">Σκίαση</string>
|
||||
<string name="glasses_sunblock_hint">Σκουραίνει τους μπροστινούς φακούς.</string>
|
||||
<string name="glasses_tracking">Παρακολούθηση κεφαλιού</string>
|
||||
<string name="glasses_head_tracking">Παρακολούθηση κεφαλιού</string>
|
||||
<string name="glasses_head_tracking_hint">Οι αισθητήρες των ίδιων των γυαλιών περιστρέφουν την εικονική οθόνη και το SteamVR μαζί με το κεφάλι σας.</string>
|
||||
<string name="glasses_recenter">Επανακεντράρισμα προβολής</string>
|
||||
<string name="glasses_recenter_button">Επανακεντράρισμα</string>
|
||||
<string name="glasses_vr_fov">Οπτικό πεδίο SteamVR</string>
|
||||
<string name="glasses_vr_fov_hint">Χαμηλότερο: το SteamVR έρχεται πιο κοντά και γεμίζει τα γυαλιά· υψηλότερο: βλέπετε περισσότερα γύρω σας.</string>
|
||||
<string name="glasses_playing">Παίζετε στα %1$s</string>
|
||||
<string name="glasses_calibration">Βαθμονόμηση παρακολούθησης</string>
|
||||
<string name="glasses_calibration_hint">Μειώνει την ολίσθηση και ευθυγραμμίζει την οριζόντια αναφορά.</string>
|
||||
<string name="glasses_calibration_saved_hint">Σε αυτά τα γυαλιά εφαρμόζεται αποθηκευμένη βαθμονόμηση.</string>
|
||||
<string name="glasses_calibration_open">Βαθμονόμηση</string>
|
||||
<string name="glasses_calibration_instructions">Τοποθετήστε τα συνδεδεμένα γυαλιά ανάποδα σε οριζόντια επιφάνεια, με τον σκελετό να ακουμπά ομοιόμορφα. Πατήστε «Έναρξη» και μην τα αγγίξετε για περίπου 8 δευτερόλεπτα. Αν κινηθούν, η μέτρηση ξεκινά από την αρχή. Αυτό διορθώνει την ολίσθηση και την κλίση, όχι την κατεύθυνση.</string>
|
||||
<string name="glasses_calibration_settling">Αφήστε τα γυαλιά ανάποδα χωρίς να τα αγγίζετε. Αναμονή για να σταθεροποιηθούν…</string>
|
||||
<string name="glasses_calibration_collecting">Γίνεται μέτρηση των αισθητήρων. Κρατήστε τα γυαλιά ακίνητα.</string>
|
||||
<string name="glasses_calibration_moving">Εντοπίστηκε κίνηση. Μην αγγίζετε τα γυαλιά· η μέτρηση θα ξεκινήσει ξανά αυτόματα.</string>
|
||||
<string name="glasses_calibration_turn_over">Τοποθετήστε τα γυαλιά ανάποδα σε οριζόντια επιφάνεια. Η μέτρηση θα ξεκινήσει μόλις τοποθετηθούν σωστά.</string>
|
||||
<string name="glasses_calibration_complete">Η βαθμονόμηση αποθηκεύτηκε. Φορέστε τα γυαλιά, κοιτάξτε ευθεία μπροστά και πατήστε «Τέλος» για επανακεντράρισμα.</string>
|
||||
<string name="glasses_calibration_failed">Η βαθμονόμηση δεν ολοκληρώθηκε. Ελέγξτε τη σύνδεση, κρατήστε τα γυαλιά ακίνητα και δοκιμάστε ξανά. Η προηγούμενη βαθμονόμησή σας δεν άλλαξε.</string>
|
||||
<string name="glasses_calibration_start">Έναρξη</string>
|
||||
<string name="glasses_calibration_done">Τέλος</string>
|
||||
<string name="glasses_calibration_reset">Επαναφορά βαθμονόμησης παρακολούθησης</string>
|
||||
<string name="glasses_calibration_reset_hint">Να καταργηθεί η αποθηκευμένη βαθμονόμηση και να επανέλθουν οι προεπιλογές του μοντέλου; Κάντε επανακεντράρισμα αφού φορέσετε ξανά τα γυαλιά.</string>
|
||||
<string name="glasses_calibration_reset_button">Επαναφορά</string>
|
||||
<string name="hand_camera_group">Παρακολούθηση χεριών</string>
|
||||
<string name="hand_camera_prompt_title">Να παρακολουθούνται τα χέρια σας με την κάμερα;</string>
|
||||
<string name="hand_camera_prompt_body">Η κάμερα μπορεί να δει τα χέρια σας. Χωρίς συνδεδεμένο χειριστήριο, τα γυμνά χέρια σας γίνονται τα χέρια VR: ενώστε τον αντίχειρα με τον δείκτη για κλικ, κλείστε το χέρι για να πιάσετε, και για το μενού γυρίστε την παλάμη προς το μέρος σας και ενώστε τα δάχτυλα. Με Joy-Con, τα τοποθετεί εκεί όπου βρίσκονται πραγματικά τα χέρια σας. Οι εικόνες επεξεργάζονται σε αυτή τη συσκευή και δεν αποθηκεύονται ούτε αποστέλλονται ποτέ.</string>
|
||||
<string name="hand_camera_rear">Πίσω κάμερα</string>
|
||||
<string name="hand_camera_rear_hint">Προτείνεται. Συνήθως πιο ευκρινής και ευρύτερη.</string>
|
||||
<string name="hand_camera_front">Μπροστινή κάμερα</string>
|
||||
<string name="hand_camera_front_hint">Για όταν η πίσω πλευρά της συσκευής δεν μπορεί να είναι στραμμένη προς εσάς.</string>
|
||||
<string name="hand_camera_allow">Χρήση κάμερας</string>
|
||||
<string name="hand_camera_not_now">Όχι τώρα</string>
|
||||
<string name="hand_camera_setting">Παρακολούθηση χεριών με κάμερα</string>
|
||||
<string name="hand_camera_setting_hint">Χωρίς συνδεδεμένο χειριστήριο, τα χέρια σας γίνονται τα χέρια VR: ενώστε τα δάχτυλα για κλικ, και με την παλάμη προς εσάς ενώστε τα για το μενού. Με Joy-Con, τα τοποθετεί εκεί όπου τα βλέπει η κάμερα. Οι εικόνες παραμένουν σε αυτή τη συσκευή.</string>
|
||||
<string name="hand_camera_choice">Κάμερα</string>
|
||||
<string name="hand_camera_access">Πρόσβαση στην κάμερα</string>
|
||||
<string name="hand_camera_access_hint">Επιτρέψτε την πρόσβαση στην κάμερα για να ξεκινήσει η παρακολούθηση χεριών.</string>
|
||||
<string name="hand_camera_access_denied">Η πρόσβαση στην κάμερα είναι απενεργοποιημένη. Ενεργοποιήστε την από τις ρυθμίσεις Android.</string>
|
||||
<string name="hand_camera_allow_button">Να επιτρέπεται</string>
|
||||
<string name="hand_camera_open_settings">Άνοιγμα ρυθμίσεων</string>
|
||||
<string name="hand_camera_placement">Τοποθέτηση κάμερας</string>
|
||||
<string name="hand_camera_placement_hint">Βεβαιωθείτε ότι η κάμερα σάς βλέπει πριν παίξετε.</string>
|
||||
<string name="hand_camera_check">Έλεγχος</string>
|
||||
<string name="hand_camera_check_title">Τοποθέτηση κάμερας</string>
|
||||
<string name="hand_camera_how_rear">Στήστε τη συσκευή όρθια σε απόσταση 1,5 έως 2 μέτρων, περίπου στο ύψος του στήθους, με την πίσω κάμερα στραμμένη προς εσάς. Έπειτα μπείτε στο οπτικό πεδίο με τα χέρια τεντωμένα.</string>
|
||||
<string name="hand_camera_how_front">Στήστε τη συσκευή όρθια σε απόσταση 1,5 έως 2 μέτρων, περίπου στο ύψος του στήθους, με την οθόνη στραμμένη προς εσάς. Έπειτα μπείτε στο οπτικό πεδίο με τα χέρια τεντωμένα.</string>
|
||||
<string name="hand_camera_starting">Εκκίνηση κάμερας…</string>
|
||||
<string name="hand_camera_stand_up">Η συσκευή είναι ξαπλωμένη οριζόντια. Στήστε την όρθια ώστε η κάμερα να είναι στραμμένη προς εσάς.</string>
|
||||
<string name="hand_camera_upright">Στήστε τη συσκευή πιο όρθια ώστε η κάμερα να είναι στραμμένη προς εσάς.</string>
|
||||
<string name="hand_camera_not_seen">Δεν φαίνεστε ακόμη. Μπείτε στο οπτικό πεδίο ώστε να φαίνονται το κεφάλι και οι ώμοι σας.</string>
|
||||
<string name="hand_camera_move_back">Κάντε ένα βήμα πίσω.</string>
|
||||
<string name="hand_camera_move_closer">Πλησιάστε λίγο.</string>
|
||||
<string name="hand_camera_show_hands">Κρατήστε και τα δύο χέρια τεντωμένα εκεί όπου μπορεί να τα δει η κάμερα.</string>
|
||||
<string name="hand_camera_good">Φαίνεται καλό.</string>
|
||||
<string name="hand_camera_failed">Η κάμερα δεν μπόρεσε να εκκινηθεί. Κλείστε άλλες εφαρμογές που τη χρησιμοποιούν και δοκιμάστε ξανά.</string>
|
||||
<string name="hand_camera_switch">Αλλαγή κάμερας</string>
|
||||
<string name="hand_camera_skip">Παράλειψη</string>
|
||||
<string name="hand_camera_done">Τέλος</string>
|
||||
<string name="glasses_xreal_network_missing">Αναμονή για τη σύνδεση USB Ethernet των γυαλιών. Αυτό το τηλέφωνο ίσως δεν τη διαθέτει στις εφαρμογές.</string>
|
||||
<string name="glasses_xreal_connection_failed">Η σύνδεση XREAL διακόπηκε ή επέστρεψε μη υποστηριζόμενη απόκριση. Νέα προσπάθεια…</string>
|
||||
<string name="glasses_xreal_experimental">Πειραματική υποστήριξη για 1S. Χρησιμοποιήστε τη λειτουργία Follow και απενεργοποιήστε τη σταθεροποίηση στο μενού των γυαλιών. Οι κατευθύνσεις παρακολούθησης και οι λειτουργίες οθόνης χρειάζονται ακόμα δοκιμή σε συσκευή.</string>
|
||||
<string name="cardboard_title">Cardboard VR</string>
|
||||
<string name="cardboard_mode">Λειτουργία Cardboard</string>
|
||||
<string name="cardboard_mode_hint">Εικόνες για το αριστερό και το δεξί μάτι, για γυαλιά VR κινητού.</string>
|
||||
|
||||
Reference in new issue
Block a user