mirror of
https://github.com/Droid-Deck/DroidDeck.git
synced 2026-11-20 13:26:02 +00:00
Add VITURE XR controls, head tracking, and SteamVR (#732)
* Add VITURE glasses support: hardware control, 3D, head tracking Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page. * Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs * Hang the glasses Settings lip over the top of the button * Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses * Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top * Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad * Let the pad hands reach a metre out so buttons with deep colliders press * Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters * Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad * Glasses: SteamVR field of view defaults to 90° * VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand * Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's * Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam * Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end * Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs * Harden VITURE stereo negotiation and output refresh tracking * Localize stereo recovery feedback and record Astra reconnect tests * Improve test failure diagnostics and refresh Astra firmware findings * Handle VITURE docks separately and reject truncated USB frames * Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes - A 3D attempt that ends at the 640x480 fallback is remembered for that glasses model, so Play SteamVR no longer blacks out the glasses after every restart; Retry clears it and "3D for VR games" stays reachable - A VITURE Mobile Dock on its own no longer counts as glasses; through a dock Play SteamVR is hidden and the sheet shows the output and why there is no control - HDR is probed on the glasses when the session starts there - Glasses frames with a mismatched checksum are marked in the status frame log - SteamVR layer and driver vblank counters stay monotonic across refresh changes; one-eye render scale applies from activation and on mono/3D switches - Compositor binds announce the refresh clients were last told; the presenter retries a failed first swapchain - Dead strings and helpers removed; docs updated * Glasses: drop USB frames with a bad checksum * Glasses: count frames dropped for a bad checksum * Feat/viture xr (#907) * Add RayNeo Air and GT support to the XR glasses pipeline * Add RayNeo Air and GT support to the XR glasses pipeline * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Add XREAL 1S support and correct GT and Pro 2 tracking * Add XREAL 1S support and correct GT and Pro 2 tracking * Fix mirrored glasses tracking and recover SteamVR after device loss * Fix mirrored glasses tracking and recover SteamVR after device loss * Document confirmed XREAL 1S brightness control * Document confirmed XREAL 1S brightness control * Fix SteamVR glasses defaults and rendering controls * Fix SteamVR glasses defaults and rendering controls * chore: keep only the 3 newest session log folders (#852) * chore: add agent comment rules (#748) Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * fix: wireless ADB page names the child-process switch the way Android shows it (#848) * l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850) * l10n: refresh stale and untranslated strings in es, fr, ko, ru - mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales). - wincomp_needs_installer / wincomp_installers_note: es and ko still described the old "coming soon" behaviour; align with the current English text. - summary_remove_game: was still English in all four locales. Machine-assisted translation; native-speaker review is welcome. * l10n(es): say registro, not grabación, for the missing installer record --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * fix: a failed cloud save recovery no longer ends the app (#846) The cloud-recovery thread started at every app start had nothing to catch an error, so one went to CrashHandler, which halts the process with status 2. In unit tests the thread can outlive the test that started it, fail on the torn-down preferences, and take the whole test run down. The error is now logged and the thread ends. Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> * fix: an interrupted Linux runtime download resumes instead of starting again (#847) * fix: an interrupted Linux runtime download resumes instead of starting again installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file. * test: Downloader resumes a cut-off download from the bytes it kept Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes. * fix: a resumed download discards a 206 that does not start where the kept bytes end Downloader appended every 206 response to the partial file without looking at Content-Range. A server or proxy that answers a Range request with a different offset would leave a corrupt file. Check that the range starts at the kept length; otherwise delete the partial file and start again without a Range header. Adds a test with a server that answers the Range request from offset 0. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849) * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome. * l10n: correct missing active swap translations --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: droiddeckctl reaches variant-package builds (recover #842) (#854) fix: droiddeckctl reaches builds shipped under a variant package The provider authority and the start Activity's component were fixed to com.droiddeck.launcher, so droiddeckctl could not talk to the antutu, ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE now picks the package; the Activity's class name stays the same in every variant. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * feat: droiddeckctl reports on-screen pacing (recover #843) (#855) feat: droiddeckctl pacing reports the frames that reached the screen Reads SurfaceFlinger's timestats for the game's layer (or the session's SurfaceView) over a capture: frames on screen, fps on screen, the present-to-present histogram and how many intervals were off the usual cadence. Records split by a refresh-rate change are summed. A game's own fps counter counts frames handed over, so it can't show dropped or doubled frames. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * fix: Steam can restart more than twice in a session (#754) * fix: Steam can restart more than twice in a session Every exit 42 counted toward the cap that stops an update which will not install, and the count was never cleared, so the third restart of a session ended it however far apart they were. A client that ran for a minute before asking is not that loop: the count starts again. * fix: measure the client's run time as it exits The time spent collecting logs and checking FEX after the client exits counted toward its run, so a slow cleanup could make a quick exit 42 look like a long one and clear the count. --------- Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * fix: the front end keeps its page when the Fold is folded or unfolded (#832) * fix: the front end keeps its page when the Fold is folded or unfolded MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose. * fix: store login keeps rebuilding its toolbar when the display density changes StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * Release pointer buttons without replaying stale motion (#803) * Fix cursor warping on native touch down * Preserve input cleanup without replaying stale pointer motion --------- Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> * l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539) * l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja) The stores, cloud saves, Windows components, Steam touch, desktop removal and background-downloads strings landed after #284's translation snapshot, so every one of them fell back to English. Translate all 184 into Simplified Chinese, Traditional Chinese (Taiwan and Hong Kong) and Japanese, keeping each locale file's own vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定). Also fix four Hong Kong strings that kept the simplified 着色器. * l10n(zh): fix stale and ambiguous strings found in review Severe: summary_remove_game was untranslated English in all three files; mode_added_art_hint, wincomp_installers_note and wincomp_needs_installer still described the pre-#480/#492 English. Also: distinguish the Setup wizard from Android system settings in zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as 收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the re-applied-at-launch, action-failed and already-in-Games strings, and play as 執行/開啟遊戲 in zh-TW/zh-HK. * l10n(ja): fix stale and ambiguous strings found in review --------- Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * Rebuild and verify Windows VR runtime components * Rebuild and verify Windows VR runtime components * Add top, bottom, and centered picture positions for Steam sessions (#871) * fix: dependency scan ignores folders above the game folder (#859) * DroidDeck-Proton: get releases from the Droid-Deck org repo DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton (11-9.1 is Latest there), so the Components page, the update check and the guest installer read releases from the org repo instead of The412Banner's. * feat: low-latency controller and touch toggles in the session drawer (#808) * fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876) * feat: Steam home wall fills from the signed-in library instead of store picks (#878) * test: cover GPU family and support classification (#880) * Fix local builds on Linux failing after the first Comet build (#866) * feat: sort the store library and installed tabs, and switch between card and list views (#798) * feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782) * fix: keep Quest-patched Turnip as the auto default (#853) * Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864) * fix: keep proot sessions alive when the kernel loses fork events (#457) * fix(quest): correct desktop and Steam display corruption across sessions (#733) fix(quest): stabilize desktop and Steam layer presentation Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted. Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result. Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: keep SteamVR syscall hooks and report Steam crashes (#905) * fix: preserve SteamVR syscall hooks * fix: report Steam crashes through gamescope * fix: honor glasses pacing and resolution in SteamVR launches --------- Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com> * Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture * Translate the glasses calibration, XREAL and SteamVR recovery strings * SteamVR recovery: give a finished teardown time to collect logs before restarting * Credit the projects the XR glasses support builds on * Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise * Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected * Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves - Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates) - MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con - No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field - SteamVR safe mode cleared before each start so one crash no longer blocks the driver --------- Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com> Co-authored-by: informalTechCode <informaltechyt@gmail.com> Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
221 files changed
+24369
-491
No files matched your search
@@ -1,5 +1,12 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<resources>
|
||||
<string name="steamvr_recovery_title">Grafik SteamVR terhenti</string>
|
||||
<string name="steamvr_recovery_countdown">DroidDeck akan dimulakan semula dalam %1$d saat untuk menetapkan semula grafik dan membuka SteamVR sekali lagi. Permainan yang sedang berjalan akan ditutup; kemajuan yang belum disimpan tidak dapat dipulihkan.</string>
|
||||
<string name="steamvr_recovery_repeated">Ralat grafik berlaku lagi selepas dimulakan semula baru-baru ini. Pemulihan automatik dijeda untuk mengelakkan gelung. Memulakan semula akan menutup permainan anda; kemajuan yang belum disimpan tidak dapat dipulihkan.</string>
|
||||
<string name="steamvr_recovery_restart">Mulakan semula sekarang</string>
|
||||
<string name="steamvr_recovery_cancel">Biarkan terbuka</string>
|
||||
<string name="steamvr_recovery_restarting">Menetapkan semula grafik dan membuka SteamVR sekali lagi…</string>
|
||||
<string name="steamvr_recovery_failed">DroidDeck tidak dapat dimulakan semula secara automatik. Tutup apl sepenuhnya, kemudian buka semula.</string>
|
||||
<string name="app_name">DroidDeck</string>
|
||||
<string-array name="loading_hints">
|
||||
<item>Larian pertama memuat turun Steam. Ini mungkin mengambil beberapa minit.</item>
|
||||
@@ -929,6 +936,8 @@
|
||||
<string name="ctrl_keyboard_button">Butang papan kekunci</string>
|
||||
<string name="ctrl_select_steam">Tekan Select untuk membuka menu Steam</string>
|
||||
<string name="ctrl_select_steam_hint">Sebagai ganti View/Select.</string>
|
||||
<string name="ctrl_joycon_vr">Joy-Con sebagai pengawal VR</string>
|
||||
<string name="ctrl_joycon_vr_hint">Semasa SteamVR berjalan, setiap Joy-Con menjadi tangan. Halakan ke hadapan dan tahan Home atau Capture untuk memusatkannya semula.</string>
|
||||
<string name="setup_animations">Animasi</string>
|
||||
<string name="ctrl_adaptive_hint">Stik muncul di tempat anda sentuh dan tersembunyi apabila dilepaskan</string>
|
||||
<string name="ctrl_layout">Susun atur</string>
|
||||
@@ -986,6 +995,7 @@
|
||||
<string name="content_linux_desktop_hint">KDE Plasma, Firefox dan emulator anda</string>
|
||||
<string name="games_empty">Permainan yang anda pasang dalam Steam muncul di sini selepas sesi.</string>
|
||||
<string name="games_play_steam">Main Steam</string>
|
||||
<string name="games_play_steamvr">Main SteamVR</string>
|
||||
<string name="games_launch_settings">Tetapan pelancaran</string>
|
||||
<string name="games_launch">Lancarkan</string>
|
||||
<string name="games_files">Fail permainan</string>
|
||||
@@ -2280,6 +2290,113 @@
|
||||
<string name="stores_sync_gog_unreachable">Tidak dapat menyambung ke GOG</string>
|
||||
<string name="stores_sync_gog_unreadable">Pustaka GOG anda tidak dapat dibaca</string>
|
||||
<string name="stores_registering">Mendaftar dengan Steam…</string>
|
||||
<string name="drawer_page_glasses">Cermin mata</string>
|
||||
<string name="glasses_open">Cermin mata VITURE</string>
|
||||
<string name="glasses_control">Kawalan cermin mata</string>
|
||||
<string name="glasses_driver_missing">Binaan ini tidak menyertakan pemacu untuk cermin mata ini.</string>
|
||||
<string name="glasses_connection_failed">Tidak dapat menyambung ke cermin mata. Sambungkan semula kabel atau ketik Benarkan untuk mencuba lagi.</string>
|
||||
<string name="glasses_allow">Benarkan</string>
|
||||
<string name="glasses_allow_hint">Benarkan DroidDeck menetapkan kadar penyegaran, mod 3D, kecerahan, kelantangan dan peredup kanta cermin mata, serta membaca penjejakan kepalanya.</string>
|
||||
<string name="glasses_asking">Menunggu anda membenarkannya dalam dialog Android…</string>
|
||||
<string name="glasses_denied">Kawalan ditolak. Benarkannya untuk menukar tetapan cermin mata.</string>
|
||||
<string name="glasses_no_control">Cermin mata ini memaparkan permainan, tetapi tetapannya tidak boleh ditukar dari sini.</string>
|
||||
<string name="glasses_output">Output</string>
|
||||
<string name="glasses_status">%1$d×%2$d · %3$d Hz · %4$s</string>
|
||||
<string name="glasses_mode_2d">2D</string>
|
||||
<string name="glasses_mode_3d">3D</string>
|
||||
<string name="glasses_game_on">Permainan pada cermin mata</string>
|
||||
<string name="glasses_game_on_hint">Paparkan permainan pada cermin mata sahaja. Mati: telefon memaparkannya dan Android mencerminkan skrin telefon.</string>
|
||||
<string name="glasses_display">Paparan</string>
|
||||
<string name="glasses_refresh">Kadar penyegaran</string>
|
||||
<string name="glasses_3d">3D (sebelah-menyebelah)</string>
|
||||
<string name="glasses_3d_hint">Setiap mata mendapat separuh gambar 3840×1080 sendiri. Jika gambar hilang, tahan butang 2D/3D cermin mata.</string>
|
||||
<string name="glasses_3d_failed">Isyarat 3D tidak dapat disahkan. Cuba lagi selepas gambar 2D kembali.</string>
|
||||
<string name="glasses_no_signal">Tiada gambar: cermin mata dalam mod yang tidak dapat dihantar oleh telefon ini. Tahan butang 2D/3D-nya, atau cabut dan pasang semula.</string>
|
||||
<string name="glasses_3d_refresh">Kadar penyegaran 3D</string>
|
||||
<string name="glasses_auto3d">3D untuk permainan VR</string>
|
||||
<string name="glasses_auto3d_hint">Bertukar kepada 3D semasa SteamVR berjalan, dan kembali selepas itu.</string>
|
||||
<string name="glasses_picture">Gambar 3D</string>
|
||||
<string name="glasses_picture_hint">Automatik: SteamVR memenuhi pandangan; permainan lain terapung sebagai skrin dalam 3D dan kekal rata dalam 2D.</string>
|
||||
<string name="glasses_picture_auto">Automatik</string>
|
||||
<string name="glasses_picture_screen">Skrin maya</string>
|
||||
<string name="glasses_picture_sbs">Permainan 3D sebelah-menyebelah</string>
|
||||
<string name="glasses_screen_size">Lebar skrin</string>
|
||||
<string name="glasses_screen_distance">Jarak skrin</string>
|
||||
<string name="glasses_screen_next_session">Lebar dan jarak digunakan apabila permainan berjalan pada cermin mata sebagai skrin maya.</string>
|
||||
<string name="glasses_screen_no_output">Tetapan ini digunakan semasa Permainan pada cermin mata didayakan dan permainan dipaparkan di sana.</string>
|
||||
<string name="glasses_screen_flat_hint">Automatik mengekalkan permainan 2D ini dalam skrin penuh. Gunakan skrin maya untuk melaraskan lebar, jarak dan penjejakan kepalanya.</string>
|
||||
<string name="glasses_screen_use">Gunakan skrin maya</string>
|
||||
<string name="glasses_screen_direct_hint">SteamVR memenuhi pandangan. Laraskan medan pandangannya di bawah; lebar dan jarak hanya digunakan untuk skrin maya.</string>
|
||||
<string name="glasses_screen_sbs_hint">Permainan sebelah-menyebelah memenuhi setiap mata. Lebar dan jarak hanya digunakan untuk skrin maya.</string>
|
||||
<string name="glasses_tracking_flat_hint">Automatik mengekalkan permainan 2D ini tetap dalam pandangan. Pilih Skrin maya dalam Paparan untuk menggunakan penjejakan kepala.</string>
|
||||
<string name="glasses_tracking_sbs_hint">Penjejakan kepala digunakan untuk skrin maya atau permainan SteamVR yang sedang berjalan.</string>
|
||||
<string name="glasses_hardware">Cermin mata</string>
|
||||
<string name="glasses_brightness">Kecerahan</string>
|
||||
<string name="glasses_volume">Kelantangan</string>
|
||||
<string name="glasses_sunblock">Peredup kanta</string>
|
||||
<string name="glasses_sunblock_hint">Menggelapkan kanta hadapan.</string>
|
||||
<string name="glasses_tracking">Penjejakan kepala</string>
|
||||
<string name="glasses_head_tracking">Penjejakan kepala</string>
|
||||
<string name="glasses_head_tracking_hint">Penderia cermin mata itu sendiri memutarkan skrin maya dan SteamVR mengikut kepala anda.</string>
|
||||
<string name="glasses_recenter">Pusatkan semula paparan</string>
|
||||
<string name="glasses_recenter_button">Pusatkan semula</string>
|
||||
<string name="glasses_vr_fov">Medan pandangan SteamVR</string>
|
||||
<string name="glasses_vr_fov_hint">Lebih rendah mendekatkan SteamVR dan memenuhi cermin mata; lebih tinggi menunjukkan lebih banyak di sekeliling anda.</string>
|
||||
<string name="glasses_playing">Bermain pada %1$s</string>
|
||||
<string name="glasses_calibration">Penentukuran penjejakan</string>
|
||||
<string name="glasses_calibration_hint">Mengurangkan hanyutan dan menjajarkan rujukan mendatar.</string>
|
||||
<string name="glasses_calibration_saved_hint">Penentukuran yang disimpan digunakan pada cermin mata ini.</string>
|
||||
<string name="glasses_calibration_open">Tentukur</string>
|
||||
<string name="glasses_calibration_instructions">Letakkan cermin mata yang disambungkan secara terbalik di atas permukaan rata, dengan bingkainya terletak sekata. Ketik Mula, kemudian jangan sentuh selama kira-kira 8 saat. Pergerakan akan memulakan semula pengukuran. Ini melaraskan hanyutan dan kecondongan, bukan arah haluan.</string>
|
||||
<string name="glasses_calibration_settling">Biarkan cermin mata terbalik dan jangan sentuh. Menunggu ia stabil…</string>
|
||||
<string name="glasses_calibration_collecting">Mengukur penderia. Pastikan cermin mata tidak bergerak.</string>
|
||||
<string name="glasses_calibration_moving">Pergerakan dikesan. Jangan sentuh cermin mata; pengukuran akan bermula semula secara automatik.</string>
|
||||
<string name="glasses_calibration_turn_over">Letakkan cermin mata secara terbalik di atas permukaan rata. Pengukuran akan bermula apabila ia diletakkan dengan betul.</string>
|
||||
<string name="glasses_calibration_complete">Penentukuran disimpan. Pakai cermin mata dan pandang lurus ke hadapan, kemudian ketik Selesai untuk memusatkan semula.</string>
|
||||
<string name="glasses_calibration_failed">Penentukuran tidak dapat diselesaikan. Semak sambungan dan pastikan cermin mata tidak bergerak, kemudian cuba lagi. Penentukuran anda sebelum ini tidak berubah.</string>
|
||||
<string name="glasses_calibration_start">Mula</string>
|
||||
<string name="glasses_calibration_done">Selesai</string>
|
||||
<string name="glasses_calibration_reset">Tetapkan semula penentukuran penjejakan</string>
|
||||
<string name="glasses_calibration_reset_hint">Alih keluar penentukuran yang disimpan dan pulihkan tetapan lalai model? Pusatkan semula selepas memakai cermin mata semula.</string>
|
||||
<string name="glasses_calibration_reset_button">Tetapkan semula</string>
|
||||
<string name="hand_camera_group">Penjejakan tangan</string>
|
||||
<string name="hand_camera_prompt_title">Jejak tangan anda dengan kamera?</string>
|
||||
<string name="hand_camera_prompt_body">Kamera boleh melihat tangan anda. Tanpa pengawal yang disambungkan, tangan kosong anda menjadi tangan VR: rapatkan ibu jari dan jari telunjuk untuk mengklik, genggam tangan untuk memegang, dan hadapkan tapak tangan ke arah anda lalu rapatkan jari untuk membuka menu. Dengan Joy-Con, kamera meletakkannya di tempat tangan anda sebenarnya berada. Gambar diproses pada peranti ini dan tidak pernah disimpan atau dihantar.</string>
|
||||
<string name="hand_camera_rear">Kamera belakang</string>
|
||||
<string name="hand_camera_rear_hint">Disyorkan. Biasanya lebih jelas dan lebih luas.</string>
|
||||
<string name="hand_camera_front">Kamera depan</string>
|
||||
<string name="hand_camera_front_hint">Untuk apabila bahagian belakang peranti tidak boleh menghadap anda.</string>
|
||||
<string name="hand_camera_allow">Gunakan kamera</string>
|
||||
<string name="hand_camera_not_now">Bukan sekarang</string>
|
||||
<string name="hand_camera_setting">Penjejakan tangan dengan kamera</string>
|
||||
<string name="hand_camera_setting_hint">Tanpa pengawal yang disambungkan, tangan anda menjadi tangan VR: rapatkan jari untuk mengklik, hadapkan tapak tangan ke arah anda dan rapatkan jari untuk menu. Dengan Joy-Con, ia meletakkannya di tempat yang dilihat oleh kamera. Gambar kekal pada peranti ini.</string>
|
||||
<string name="hand_camera_choice">Kamera</string>
|
||||
<string name="hand_camera_access">Akses kamera</string>
|
||||
<string name="hand_camera_access_hint">Benarkan akses kamera supaya penjejakan tangan boleh bermula.</string>
|
||||
<string name="hand_camera_access_denied">Akses kamera dimatikan. Hidupkannya dalam tetapan Android.</string>
|
||||
<string name="hand_camera_allow_button">Benarkan</string>
|
||||
<string name="hand_camera_open_settings">Buka tetapan</string>
|
||||
<string name="hand_camera_placement">Kedudukan kamera</string>
|
||||
<string name="hand_camera_placement_hint">Pastikan kamera boleh melihat anda sebelum bermain.</string>
|
||||
<string name="hand_camera_check">Semak</string>
|
||||
<string name="hand_camera_check_title">Kedudukan kamera</string>
|
||||
<string name="hand_camera_how_rear">Dirikan peranti sejauh 1.5 hingga 2 meter kira-kira pada paras dada, dengan kamera belakang menghadap anda. Kemudian masuk ke pandangan dengan tangan terhulur.</string>
|
||||
<string name="hand_camera_how_front">Dirikan peranti sejauh 1.5 hingga 2 meter kira-kira pada paras dada, dengan skrin menghadap anda. Kemudian masuk ke pandangan dengan tangan terhulur.</string>
|
||||
<string name="hand_camera_starting">Memulakan kamera…</string>
|
||||
<string name="hand_camera_stand_up">Peranti terbaring rata. Dirikannya supaya kamera menghadap anda.</string>
|
||||
<string name="hand_camera_upright">Dirikan peranti dengan lebih tegak supaya kamera menghadap anda.</string>
|
||||
<string name="hand_camera_not_seen">Belum dapat melihat anda. Masuk ke pandangan supaya kepala dan bahu anda kelihatan.</string>
|
||||
<string name="hand_camera_move_back">Undur sedikit.</string>
|
||||
<string name="hand_camera_move_closer">Dekatkan sedikit lagi.</string>
|
||||
<string name="hand_camera_show_hands">Hulurkan kedua-dua tangan di tempat yang boleh dilihat oleh kamera.</string>
|
||||
<string name="hand_camera_good">Kelihatan baik.</string>
|
||||
<string name="hand_camera_failed">Kamera tidak dapat dimulakan. Tutup aplikasi lain yang menggunakannya dan cuba lagi.</string>
|
||||
<string name="hand_camera_switch">Tukar kamera</string>
|
||||
<string name="hand_camera_skip">Langkau</string>
|
||||
<string name="hand_camera_done">Selesai</string>
|
||||
<string name="glasses_xreal_network_missing">Menunggu sambungan USB Ethernet cermin mata. Telefon ini mungkin tidak mendedahkannya kepada apl.</string>
|
||||
<string name="glasses_xreal_connection_failed">Sambungan XREAL terganggu atau memberikan respons yang tidak disokong. Mencuba semula…</string>
|
||||
<string name="glasses_xreal_experimental">Sokongan eksperimen untuk 1S. Gunakan mod Follow dan matikan penstabilan dalam menu cermin mata. Arah penjejakan dan mod paparan masih perlu diuji pada peranti.</string>
|
||||
<string name="cardboard_title">Cardboard VR</string>
|
||||
<string name="cardboard_mode">Mod Cardboard</string>
|
||||
<string name="cardboard_mode_hint">Paparan mata kiri dan kanan untuk kaca mata VR telefon.</string>
|
||||
|
||||
Reference in new issue
Block a user