Add VITURE XR controls, head tracking, and SteamVR (#732)

* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

---------

Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
221 files changed
+24369 -491

No files matched your search

+117
View File
@@ -1,5 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<resources>
<string name="steamvr_recovery_title">Đồ họa SteamVR đã dừng</string>
<string name="steamvr_recovery_countdown">DroidDeck sẽ khởi động lại sau %1$d giây để đặt lại đồ họa và mở lại SteamVR. Game đang chạy sẽ bị đóng; tiến trình chưa lưu sẽ không thể khôi phục.</string>
<string name="steamvr_recovery_repeated">Lỗi đồ họa lại xuất hiện sau lần khởi động lại gần đây. Tự động khôi phục đã tạm dừng để tránh lặp vô hạn. Khởi động lại sẽ đóng game của bạn; tiến trình chưa lưu sẽ không thể khôi phục.</string>
<string name="steamvr_recovery_restart">Khởi động lại ngay</string>
<string name="steamvr_recovery_cancel">Giữ mở</string>
<string name="steamvr_recovery_restarting">Đang đặt lại đồ họa và mở lại SteamVR…</string>
<string name="steamvr_recovery_failed">DroidDeck không thể tự khởi động lại. Hãy đóng hẳn ứng dụng rồi mở lại.</string>
<string name="app_name">DroidDeck</string>
<string-array name="loading_hints">
<item>Lần chạy đầu tải Steam. Quá trình này có thể mất vài phút.</item>
@@ -929,6 +936,8 @@
<string name="ctrl_keyboard_button">Nút bàn phím</string>
<string name="ctrl_select_steam">Nhấn Select để mở menu Steam</string>
<string name="ctrl_select_steam_hint">Thay cho View/Select.</string>
<string name="ctrl_joycon_vr">Dùng Joy-Con làm tay cầm VR</string>
<string name="ctrl_joycon_vr_hint">Khi SteamVR đang chạy, mỗi Joy-Con trở thành một bàn tay. Hướng nó về phía trước rồi giữ Home hoặc Capture để căn giữa lại.</string>
<string name="setup_animations">Hiệu ứng chuyển động</string>
<string name="ctrl_adaptive_hint">Cần xuất hiện ở nơi bạn chạm và ẩn khi thả ra</string>
<string name="ctrl_layout">Bố cục</string>
@@ -986,6 +995,7 @@
<string name="content_linux_desktop_hint">KDE Plasma, Firefox và các trình giả lập của bạn</string>
<string name="games_empty">Game bạn cài trong Steam sẽ xuất hiện ở đây sau phiên.</string>
<string name="games_play_steam">Chơi trên Steam</string>
<string name="games_play_steamvr">Chơi trên SteamVR</string>
<string name="games_launch_settings">Thiết lập khởi chạy</string>
<string name="games_launch">Khởi chạy</string>
<string name="games_files">Tệp game</string>
@@ -2280,6 +2290,113 @@
<string name="stores_sync_gog_unreachable">Không thể kết nối với GOG</string>
<string name="stores_sync_gog_unreadable">Không thể đọc thư viện GOG của bạn</string>
<string name="stores_registering">Đang đăng ký với Steam…</string>
<string name="drawer_page_glasses">Kính</string>
<string name="glasses_open">Kính VITURE</string>
<string name="glasses_control">Điều khiển kính</string>
<string name="glasses_driver_missing">Bản build này không có driver cho kính này.</string>
<string name="glasses_connection_failed">Không thể kết nối với kính. Hãy cắm lại cáp hoặc nhấn “Cho phép” để thử lại.</string>
<string name="glasses_allow">Cho phép</string>
<string name="glasses_allow_hint">Để DroidDeck đặt tốc độ làm mới, chế độ 3D, độ sáng, âm lượng và chống nắng của kính, đồng thời đọc dữ liệu theo dõi đầu của kính.</string>
<string name="glasses_asking">Đang chờ bạn cho phép trong hộp thoại của Android…</string>
<string name="glasses_denied">Quyền điều khiển đã bị từ chối. Hãy cho phép để thay đổi thiết lập của kính.</string>
<string name="glasses_no_control">Kính này hiển thị game, nhưng không thể thay đổi thiết lập của kính từ đây.</string>
<string name="glasses_output">Đầu ra</string>
<string name="glasses_status">%1$d×%2$d · %3$d Hz · %4$s</string>
<string name="glasses_mode_2d">2D</string>
<string name="glasses_mode_3d">3D</string>
<string name="glasses_game_on">Game trên kính</string>
<string name="glasses_game_on_hint">Chỉ hiển thị game trên kính. Khi tắt: điện thoại hiển thị game và Android phản chiếu màn hình điện thoại.</string>
<string name="glasses_display">Hiển thị</string>
<string name="glasses_refresh">Tốc độ làm mới</string>
<string name="glasses_3d">3D (cạnh nhau)</string>
<string name="glasses_3d_hint">Mỗi mắt nhận một nửa riêng của hình 3840×1080. Nếu mất hình, hãy giữ nút 2D/3D của kính.</string>
<string name="glasses_3d_failed">Chưa xác nhận được tín hiệu 3D. Hãy thử lại khi hình ảnh 2D trở lại.</string>
<string name="glasses_no_signal">Không có hình: kính đang ở chế độ mà điện thoại này không thể xuất. Hãy giữ nút 2D/3D của kính, hoặc rút ra rồi cắm lại.</string>
<string name="glasses_3d_refresh">Tốc độ làm mới 3D</string>
<string name="glasses_auto3d">3D cho game VR</string>
<string name="glasses_auto3d_hint">Chuyển sang 3D khi SteamVR chạy, rồi chuyển lại sau đó.</string>
<string name="glasses_picture">Hình ảnh 3D</string>
<string name="glasses_picture_hint">Tự động: SteamVR lấp đầy tầm nhìn; các game khác hiện như một màn hình lơ lửng ở 3D và giữ phẳng ở 2D.</string>
<string name="glasses_picture_auto">Tự động</string>
<string name="glasses_picture_screen">Màn hình ảo</string>
<string name="glasses_picture_sbs">Game 3D cạnh nhau</string>
<string name="glasses_screen_size">Chiều rộng màn hình</string>
<string name="glasses_screen_distance">Khoảng cách màn hình</string>
<string name="glasses_screen_next_session">Chiều rộng và khoảng cách được áp dụng khi game chạy trên kính dưới dạng màn hình ảo.</string>
<string name="glasses_screen_no_output">Các thiết lập này áp dụng khi “Game trên kính” đang bật và game đang hiển thị trên kính.</string>
<string name="glasses_screen_flat_hint">Tự động giữ game 2D này ở chế độ toàn màn hình. Dùng màn hình ảo để chỉnh chiều rộng, khoảng cách và theo dõi đầu.</string>
<string name="glasses_screen_use">Dùng màn hình ảo</string>
<string name="glasses_screen_direct_hint">SteamVR lấp đầy tầm nhìn. Chỉnh trường nhìn ở bên dưới; chiều rộng và khoảng cách chỉ áp dụng cho màn hình ảo.</string>
<string name="glasses_screen_sbs_hint">Game 3D cạnh nhau lấp đầy từng mắt. Chiều rộng và khoảng cách chỉ áp dụng cho màn hình ảo.</string>
<string name="glasses_tracking_flat_hint">Tự động giữ game 2D này cố định trong tầm nhìn. Chọn “Màn hình ảo” trong “Hiển thị” để dùng theo dõi đầu.</string>
<string name="glasses_tracking_sbs_hint">Theo dõi đầu áp dụng cho màn hình ảo hoặc game SteamVR đang chạy.</string>
<string name="glasses_hardware">Kính</string>
<string name="glasses_brightness">Độ sáng</string>
<string name="glasses_volume">Âm lượng</string>
<string name="glasses_sunblock">Chống nắng</string>
<string name="glasses_sunblock_hint">Làm tối tròng kính phía trước.</string>
<string name="glasses_tracking">Theo dõi đầu</string>
<string name="glasses_head_tracking">Theo dõi đầu</string>
<string name="glasses_head_tracking_hint">Cảm biến riêng của kính xoay màn hình ảo và SteamVR theo đầu bạn.</string>
<string name="glasses_recenter">Căn giữa lại góc nhìn</string>
<string name="glasses_recenter_button">Căn giữa lại</string>
<string name="glasses_vr_fov">Trường nhìn của SteamVR</string>
<string name="glasses_vr_fov_hint">Thấp hơn sẽ đưa SteamVR lại gần và lấp đầy kính; cao hơn cho thấy nhiều hơn xung quanh bạn.</string>
<string name="glasses_playing">Đang chơi trên %1$s</string>
<string name="glasses_calibration">Hiệu chỉnh theo dõi</string>
<string name="glasses_calibration_hint">Giảm hiện tượng trôi và căn lại mốc thăng bằng.</string>
<string name="glasses_calibration_saved_hint">Hiệu chỉnh đã lưu đang được áp dụng cho kính này.</string>
<string name="glasses_calibration_open">Hiệu chỉnh</string>
<string name="glasses_calibration_instructions">Đặt kính đang kết nối lật úp trên mặt phẳng nằm ngang, sao cho gọng kính tựa đều. Nhấn “Bắt đầu”, rồi để yên kính khoảng 8 giây. Chuyển động sẽ khiến phép đo bắt đầu lại. Thao tác này chỉnh độ trôi và độ nghiêng, không chỉnh hướng nhìn.</string>
<string name="glasses_calibration_settling">Để kính lật úp và không chạm vào. Đang chờ kính ổn định…</string>
<string name="glasses_calibration_collecting">Đang đo cảm biến. Hãy giữ yên kính.</string>
<string name="glasses_calibration_moving">Phát hiện chuyển động. Đừng chạm vào kính; phép đo sẽ tự động bắt đầu lại.</string>
<string name="glasses_calibration_turn_over">Đặt kính lật úp trên mặt phẳng nằm ngang. Phép đo sẽ bắt đầu khi kính được đặt đúng vị trí.</string>
<string name="glasses_calibration_complete">Đã lưu hiệu chỉnh. Đeo kính vào và nhìn thẳng về phía trước, rồi nhấn “Xong” để căn giữa lại.</string>
<string name="glasses_calibration_failed">Không thể hoàn tất hiệu chỉnh. Hãy kiểm tra kết nối và giữ yên kính, rồi thử lại. Hiệu chỉnh trước đó vẫn được giữ nguyên.</string>
<string name="glasses_calibration_start">Bắt đầu</string>
<string name="glasses_calibration_done">Xong</string>
<string name="glasses_calibration_reset">Đặt lại hiệu chỉnh theo dõi</string>
<string name="glasses_calibration_reset_hint">Xóa hiệu chỉnh đã lưu và khôi phục mặc định của mẫu kính? Hãy căn giữa lại sau khi đeo kính vào.</string>
<string name="glasses_calibration_reset_button">Đặt lại</string>
<string name="hand_camera_group">Theo dõi tay</string>
<string name="hand_camera_prompt_title">Theo dõi tay của bạn bằng camera?</string>
<string name="hand_camera_prompt_body">Camera có thể thấy tay bạn. Khi không kết nối tay cầm nào, đôi tay trần của bạn sẽ trở thành tay trong VR: chụm ngón cái và ngón trỏ để nhấp, nắm tay lại để cầm, và xoay lòng bàn tay về phía bạn rồi chụm ngón tay để mở menu. Khi dùng Joy-Con, camera đặt chúng đúng nơi tay bạn thực sự ở. Hình ảnh được xử lý ngay trên thiết bị này và không bao giờ được lưu hay gửi đi.</string>
<string name="hand_camera_rear">Camera sau</string>
<string name="hand_camera_rear_hint">Nên dùng. Thường sắc nét và có góc nhìn rộng hơn.</string>
<string name="hand_camera_front">Camera trước</string>
<string name="hand_camera_front_hint">Dùng khi không thể hướng mặt sau thiết bị về phía bạn.</string>
<string name="hand_camera_allow">Dùng camera</string>
<string name="hand_camera_not_now">Không phải bây giờ</string>
<string name="hand_camera_setting">Theo dõi tay bằng camera</string>
<string name="hand_camera_setting_hint">Khi không kết nối tay cầm nào, tay bạn sẽ trở thành tay trong VR: chụm ngón tay để nhấp, lòng bàn tay hướng về bạn và chụm ngón để mở menu. Khi dùng Joy-Con, chúng được đặt đúng vị trí camera nhìn thấy. Hình ảnh luôn ở lại trên thiết bị này.</string>
<string name="hand_camera_choice">Camera</string>
<string name="hand_camera_access">Quyền camera</string>
<string name="hand_camera_access_hint">Hãy cho phép quyền camera để bắt đầu theo dõi tay.</string>
<string name="hand_camera_access_denied">Quyền camera đang tắt. Hãy bật trong thiết lập Android.</string>
<string name="hand_camera_allow_button">Cho phép</string>
<string name="hand_camera_open_settings">Mở thiết lập</string>
<string name="hand_camera_placement">Vị trí camera</string>
<string name="hand_camera_placement_hint">Hãy kiểm tra xem camera có thấy bạn không trước khi chơi.</string>
<string name="hand_camera_check">Kiểm tra</string>
<string name="hand_camera_check_title">Vị trí camera</string>
<string name="hand_camera_how_rear">Dựng thiết bị cách xa khoảng 1,5 đến 2 mét, ở độ cao ngang ngực, với camera sau hướng về phía bạn. Sau đó bước vào khung hình và đưa cả hai tay ra.</string>
<string name="hand_camera_how_front">Dựng thiết bị cách xa khoảng 1,5 đến 2 mét, ở độ cao ngang ngực, với màn hình hướng về phía bạn. Sau đó bước vào khung hình và đưa cả hai tay ra.</string>
<string name="hand_camera_starting">Đang khởi động camera…</string>
<string name="hand_camera_stand_up">Thiết bị đang nằm ngang. Hãy dựng đứng để camera hướng về phía bạn.</string>
<string name="hand_camera_upright">Hãy dựng thiết bị thẳng đứng hơn để camera hướng về phía bạn.</string>
<string name="hand_camera_not_seen">Chưa thấy bạn. Hãy bước vào khung hình để thấy rõ đầu và vai bạn.</string>
<string name="hand_camera_move_back">Hãy lùi lại một chút.</string>
<string name="hand_camera_move_closer">Hãy lại gần hơn một chút.</string>
<string name="hand_camera_show_hands">Hãy đưa cả hai tay ra nơi camera có thể nhìn thấy.</string>
<string name="hand_camera_good">Trông ổn rồi.</string>
<string name="hand_camera_failed">Không thể khởi động camera. Hãy đóng các ứng dụng khác đang dùng camera rồi thử lại.</string>
<string name="hand_camera_switch">Đổi camera</string>
<string name="hand_camera_skip">Bỏ qua</string>
<string name="hand_camera_done">Xong</string>
<string name="glasses_xreal_network_missing">Đang chờ kết nối USB Ethernet của kính. Điện thoại này có thể không cho ứng dụng truy cập kết nối đó.</string>
<string name="glasses_xreal_connection_failed">Kết nối XREAL bị gián đoạn hoặc trả về phản hồi không được hỗ trợ. Đang thử lại…</string>
<string name="glasses_xreal_experimental">Hỗ trợ 1S thử nghiệm. Dùng chế độ Follow và tắt ổn định hình ảnh trong menu của kính. Hướng theo dõi và các chế độ hiển thị vẫn cần thử nghiệm trên thiết bị.</string>
<string name="cardboard_title">Cardboard VR</string>
<string name="cardboard_mode">Chế độ Cardboard</string>
<string name="cardboard_mode_hint">Hình cho mắt trái và mắt phải dành cho kính VR điện thoại.</string>