mirror of
https://github.com/Droid-Deck/DroidDeck.git
synced 2026-11-20 05:16:01 +00:00
Add app-wide 3DoF for VITURE, RayNeo and XREAL glasses and 6DoF for Luma Ultra (#1035)
* Add VITURE glasses support: hardware control, 3D, head tracking Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page. * Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs * Hang the glasses Settings lip over the top of the button * Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses * Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top * Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad * Let the pad hands reach a metre out so buttons with deep colliders press * Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters * Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad * Glasses: SteamVR field of view defaults to 90° * VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand * Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's * Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam * Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end * Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs * Harden VITURE stereo negotiation and output refresh tracking * Localize stereo recovery feedback and record Astra reconnect tests * Improve test failure diagnostics and refresh Astra firmware findings * Handle VITURE docks separately and reject truncated USB frames * Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes - A 3D attempt that ends at the 640x480 fallback is remembered for that glasses model, so Play SteamVR no longer blacks out the glasses after every restart; Retry clears it and "3D for VR games" stays reachable - A VITURE Mobile Dock on its own no longer counts as glasses; through a dock Play SteamVR is hidden and the sheet shows the output and why there is no control - HDR is probed on the glasses when the session starts there - Glasses frames with a mismatched checksum are marked in the status frame log - SteamVR layer and driver vblank counters stay monotonic across refresh changes; one-eye render scale applies from activation and on mono/3D switches - Compositor binds announce the refresh clients were last told; the presenter retries a failed first swapchain - Dead strings and helpers removed; docs updated * Glasses: drop USB frames with a bad checksum * Glasses: count frames dropped for a bad checksum * Feat/viture xr (#907) * Add RayNeo Air and GT support to the XR glasses pipeline * Add RayNeo Air and GT support to the XR glasses pipeline * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Add XREAL 1S support and correct GT and Pro 2 tracking * Add XREAL 1S support and correct GT and Pro 2 tracking * Fix mirrored glasses tracking and recover SteamVR after device loss * Fix mirrored glasses tracking and recover SteamVR after device loss * Document confirmed XREAL 1S brightness control * Document confirmed XREAL 1S brightness control * Fix SteamVR glasses defaults and rendering controls * Fix SteamVR glasses defaults and rendering controls * chore: keep only the 3 newest session log folders (#852) * chore: add agent comment rules (#748) Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * fix: wireless ADB page names the child-process switch the way Android shows it (#848) * l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850) * l10n: refresh stale and untranslated strings in es, fr, ko, ru - mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales). - wincomp_needs_installer / wincomp_installers_note: es and ko still described the old "coming soon" behaviour; align with the current English text. - summary_remove_game: was still English in all four locales. Machine-assisted translation; native-speaker review is welcome. * l10n(es): say registro, not grabación, for the missing installer record --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * fix: a failed cloud save recovery no longer ends the app (#846) The cloud-recovery thread started at every app start had nothing to catch an error, so one went to CrashHandler, which halts the process with status 2. In unit tests the thread can outlive the test that started it, fail on the torn-down preferences, and take the whole test run down. The error is now logged and the thread ends. Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> * fix: an interrupted Linux runtime download resumes instead of starting again (#847) * fix: an interrupted Linux runtime download resumes instead of starting again installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file. * test: Downloader resumes a cut-off download from the bytes it kept Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes. * fix: a resumed download discards a 206 that does not start where the kept bytes end Downloader appended every 206 response to the partial file without looking at Content-Range. A server or proxy that answers a Range request with a different offset would leave a corrupt file. Check that the range starts at the kept length; otherwise delete the partial file and start again without a Range header. Adds a test with a server that answers the Range request from offset 0. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849) * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome. * l10n: correct missing active swap translations --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: droiddeckctl reaches variant-package builds (recover #842) (#854) fix: droiddeckctl reaches builds shipped under a variant package The provider authority and the start Activity's component were fixed to com.droiddeck.launcher, so droiddeckctl could not talk to the antutu, ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE now picks the package; the Activity's class name stays the same in every variant. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * feat: droiddeckctl reports on-screen pacing (recover #843) (#855) feat: droiddeckctl pacing reports the frames that reached the screen Reads SurfaceFlinger's timestats for the game's layer (or the session's SurfaceView) over a capture: frames on screen, fps on screen, the present-to-present histogram and how many intervals were off the usual cadence. Records split by a refresh-rate change are summed. A game's own fps counter counts frames handed over, so it can't show dropped or doubled frames. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * fix: Steam can restart more than twice in a session (#754) * fix: Steam can restart more than twice in a session Every exit 42 counted toward the cap that stops an update which will not install, and the count was never cleared, so the third restart of a session ended it however far apart they were. A client that ran for a minute before asking is not that loop: the count starts again. * fix: measure the client's run time as it exits The time spent collecting logs and checking FEX after the client exits counted toward its run, so a slow cleanup could make a quick exit 42 look like a long one and clear the count. --------- Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * fix: the front end keeps its page when the Fold is folded or unfolded (#832) * fix: the front end keeps its page when the Fold is folded or unfolded MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose. * fix: store login keeps rebuilding its toolbar when the display density changes StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * Release pointer buttons without replaying stale motion (#803) * Fix cursor warping on native touch down * Preserve input cleanup without replaying stale pointer motion --------- Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> * l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539) * l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja) The stores, cloud saves, Windows components, Steam touch, desktop removal and background-downloads strings landed after #284's translation snapshot, so every one of them fell back to English. Translate all 184 into Simplified Chinese, Traditional Chinese (Taiwan and Hong Kong) and Japanese, keeping each locale file's own vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定). Also fix four Hong Kong strings that kept the simplified 着色器. * l10n(zh): fix stale and ambiguous strings found in review Severe: summary_remove_game was untranslated English in all three files; mode_added_art_hint, wincomp_installers_note and wincomp_needs_installer still described the pre-#480/#492 English. Also: distinguish the Setup wizard from Android system settings in zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as 收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the re-applied-at-launch, action-failed and already-in-Games strings, and play as 執行/開啟遊戲 in zh-TW/zh-HK. * l10n(ja): fix stale and ambiguous strings found in review --------- Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * Rebuild and verify Windows VR runtime components * Rebuild and verify Windows VR runtime components * Add top, bottom, and centered picture positions for Steam sessions (#871) * fix: dependency scan ignores folders above the game folder (#859) * DroidDeck-Proton: get releases from the Droid-Deck org repo DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton (11-9.1 is Latest there), so the Components page, the update check and the guest installer read releases from the org repo instead of The412Banner's. * feat: low-latency controller and touch toggles in the session drawer (#808) * fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876) * feat: Steam home wall fills from the signed-in library instead of store picks (#878) * test: cover GPU family and support classification (#880) * Fix local builds on Linux failing after the first Comet build (#866) * feat: sort the store library and installed tabs, and switch between card and list views (#798) * feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782) * fix: keep Quest-patched Turnip as the auto default (#853) * Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864) * fix: keep proot sessions alive when the kernel loses fork events (#457) * fix(quest): correct desktop and Steam display corruption across sessions (#733) fix(quest): stabilize desktop and Steam layer presentation Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted. Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result. Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: keep SteamVR syscall hooks and report Steam crashes (#905) * fix: preserve SteamVR syscall hooks * fix: report Steam crashes through gamescope * fix: honor glasses pacing and resolution in SteamVR launches --------- Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com> * Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture * Translate the glasses calibration, XREAL and SteamVR recovery strings * SteamVR recovery: give a finished teardown time to collect logs before restarting * Credit the projects the XR glasses support builds on * Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise * Add experimental Luma tracking and stabilize SteamVR launches Add native Luma Ultra spatial tracking, optical controllers, and stereo calibration with DroidDeck styling, imperial/metric measurements, and pending recenter recovery. Include the pinned hand model and calibration board. Keep live guest and SDK files outside Android's evictable cache. Filter the Adreno 840 sysmem override in the shared SteamVR helper, serialize timeline mirroring, retain invalid optical controllers without event floods, and prevent an unprivileged scheduling fallback from lowering compositor RTTIME. Validation: latest APK build and runtime freshness checks pass; 247 affected glasses/calibration tests pass. Native VR, helper, and packaging regressions pass. Two earlier phone library launches sustained 60 fps for 308 and 188 seconds without recovery or restart. The newer calibration APK is installed and checksum-verified; calibrated-hand and sustained gameplay acceptance remain pending. One existing Android test requires Windows symlink privileges. * Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected * Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves - Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates) - MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con - No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field - SteamVR safe mode cleared before each start so one crash no longer blocks the driver * Improve Luma Ultra tracking and isolate device-specific controls Refine stereo hand and Joy-Con tracking, gesture release, calibration, recovery UI, diagnostics, display modes, and compositor handling. Keep Ultra controls and input routing behind a live SDK-confirmed Carina connection; clear retained spatial mode when other glasses connect. Add optional UVC transport with pinned dependencies and packaged notices. Validation: 456 Android tests, ARM64 VR build and native regressions, 47 tooling tests, SDK/UVC-enabled and disabled builds, and 150 packaged runtime checksums. Two shader compilation tests skipped because the compiler is unavailable. Hardware interaction gates remain experimental. * Delay Luma Ultra 6DoF until SteamVR settles Suspend spatial SDK startup while SteamVR launches, then restore it two seconds after RUNNING is confirmed. Preserve saved tracking preferences and automatically recenter same-device restoration, including cancellation and early stop. Discard superseded launch requests and status replies after session teardown. Validation: 128 focused JVM tests passed on the isolated commit snapshot; 129 passed with the current local hand-tracking work. Debug build and runtime checks passed, and the reviewed APK was installed and hash-verified on the phone. * Clarify glasses and phone camera tracking options Separate Luma Ultra camera controls from phone-camera tracking so the two hand-tracking switches have clear sources. Label bare-hand controllers and Joy-Con position tracking explicitly, explain physical Joy-Con inputs and camera priority, and update the camera prompt and calibration guidance. Use fresh phone section and toggle labels so existing translations do not hide the distinction. Preserve tracking behavior and saved preferences. Validation: 39 existing UI tests, debug build, and packaged runtime verification passed. Reviewed changes and installed the APK on the connected phone. * Fix tracking handoff and shared runtime regressions Release spatial ownership and controller overrides when output returns to the phone. Preserve USB-loss recovery, keep Vulkan submissions asynchronous, clean persistent guest scratch on runtime removal, and clarify the 6DoF head-tracking control. * Apply smart-glasses virtual screens across DroidDeck menus * Finalize Luma hand baseline and document smart-glasses support Keep raw grayscale-to-RGB Full hand inference, wrist-only Joy-Con reconstruction, bounded visual holds, and the dead-zone rollback. Retain opt-in steady aim, recenter controls, reproducible Lite models, and the JPEG-padding fix. Remove unsuccessful benchmark-only and USB transport experiments. Document the cross-brand 3DoF matrix, Luma Ultra 6DoF, SDK requirements, and app-wide screen behavior. * Fix executable permission for SteamVR launcher * Address hand tracking and VR review findings * Bound stereo recovery test image comparison memory * Localize smart-glasses setup and tracking diagnostics Move calibration controls, status messages, validation errors, distance labels, and printed-board instructions into Android string resources. Add and update machine-assisted translations in all 32 supported non-English locale catalogs, with corrections for recentering, hand tracking, product names, and measurements. Keep print instructions within the page using text layout that supports wrapping and right-to-left text. Correct the Lite model toggle description to reflect its Lite palm detector and Lite landmark model. Add locale coverage, format-argument, line-break, and measurement checks, plus French and Arabic calibration UI tests. Preserve tracking calculations and the shared runtime storage behavior. Validation: Android resource and Kotlin compilation; 3 localization checks; 68 focused tests; 1,597 JVM tests at a 512 MB heap; French and Arabic UI renders. * Correct smart-glasses translations from PR review Fix the 42 localization findings covering hand and head terminology, disabled states, calibration dimensions, camera visibility, capture rejection, and menu references. Correct the repeated capture-error ambiguity in related locales and clarify its English source. Keep Romanian setup instructions consistent with the existing informal voice. Extend localization measurement validation to distance hints and retry guidance. Verify the recovery screen's palette-dependent text color with one row-sized pixel buffer and guaranteed bitmap cleanup. Validation: Android resource and Kotlin compilation; 3 localization checks across all supported locales; 68 focused JVM tests at a 512 MB heap. * Work around SteamVR device loss with Adreno 840 Turnip v0.2.0 * Withdraw ineffective SteamVR flushall workaround --------- Co-authored-by: maxjivi05 <maxjividen@gmail.com> Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com> Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
+13








authored and
GitHub committed 2026-10-18 08:37:09 -04:00
1 parent
292295ba30
commit
e7bc4b03a5
213 files changed
+22572
-919
No files matched your search
@@ -1,5 +1,9 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<resources>
|
||||
<string name="glasses_experimental">Luma Ultra cameras — Experimental</string>
|
||||
<string name="glasses_joycons">Joy-Con position tracking</string>
|
||||
<string name="glasses_joycons_hint">Use the glasses cameras to position your paired Joy-Cons. Rotation and button inputs come from the Joy-Cons. Position is estimated when your wrists are hidden. Replaces bare-hand controllers and pauses phone-camera tracking. Point the Joy-Cons forward when connecting or recentering.</string>
|
||||
<string name="glasses_joycons_requires_position">Enable positional tracking first. Requires motion-capable Joy-Cons on Android 12 or later. Off by default.</string>
|
||||
<string name="steamvr_recovery_title">SteamVR graphics stopped</string>
|
||||
<string name="steamvr_recovery_countdown">DroidDeck will restart in %1$d seconds to reset graphics and reopen SteamVR. Your running game will close; unsaved progress cannot be restored.</string>
|
||||
<string name="steamvr_recovery_repeated">The graphics fault returned after a recent restart. Automatic recovery is paused to prevent a loop. Restarting will close your game; unsaved progress cannot be restored.</string>
|
||||
@@ -2281,6 +2285,9 @@
|
||||
<string name="comp_this_device">This device</string>
|
||||
<string name="proton_remove_title">Remove %1$s?</string>
|
||||
<string name="setup_tab_diagnostics">Diagnostics</string>
|
||||
<string name="setup_tab_glasses">Smart glasses</string>
|
||||
<string name="setup_glasses_scope">Display and head-tracking settings are shared across DroidDeck menus, games and desktop sessions.</string>
|
||||
<string name="setup_glasses_connect">Connect smart glasses to change their display and tracking settings. Your saved settings are kept when you disconnect.</string>
|
||||
<string name="setup_ready">Ready to play</string>
|
||||
<string name="setup_not_ready">Not ready to play yet</string>
|
||||
<string name="setup_ready_runtime">runtime %1$s</string>
|
||||
@@ -2414,39 +2421,62 @@
|
||||
<string name="glasses_game_on">Game on glasses</string>
|
||||
<string name="glasses_game_on_hint">Show the game only on the glasses. Off: the phone shows it and Android mirrors the phone.</string>
|
||||
<string name="glasses_display">Display</string>
|
||||
<string name="glasses_vr">VR</string>
|
||||
<string name="glasses_display_mode">Display mode</string>
|
||||
<string name="glasses_output_2d">2D output</string>
|
||||
<string name="glasses_output_3d">3D output</string>
|
||||
<string name="glasses_picture_group">Picture and virtual screen</string>
|
||||
<string name="glasses_position_group">Position and floor</string>
|
||||
<string name="glasses_hands_group">Hand tracking — Experimental</string>
|
||||
<string name="glasses_tracking_status">Tracking status</string>
|
||||
<string name="glasses_resolution_2d">2D resolution</string>
|
||||
<string name="glasses_resolution_3d">3D resolution</string>
|
||||
<string name="glasses_resolution_vr">VR resolution</string>
|
||||
<string name="glasses_resolution_auto">Automatic</string>
|
||||
<string name="glasses_resolution_inherit">Same as 2D / 3D</string>
|
||||
<string name="glasses_resolution_hint">Output resolution per eye.</string>
|
||||
<string name="glasses_refresh">Refresh rate</string>
|
||||
<string name="glasses_refresh_30_hint">Enable Game on glasses to select the display’s native 30 Hz mode.</string>
|
||||
<string name="glasses_3d">3D (side-by-side)</string>
|
||||
<string name="glasses_3d_hint">Each eye gets its own half of a 3840×1080 picture. If the picture drops out, hold the glasses\' 2D/3D button.</string>
|
||||
<string name="glasses_3d_hint">Switch the glasses to side-by-side 3D. Head tracking is controlled separately.</string>
|
||||
<string name="glasses_3dof">3DoF virtual screen</string>
|
||||
<string name="glasses_3dof_hint">Anchor flat games in front of you so you can look around. Enables Game on glasses without switching to 3D.</string>
|
||||
<string name="glasses_3d_failed">The 3D signal was not confirmed. Try again once the 2D picture returns.</string>
|
||||
<string name="glasses_no_signal">No picture: the glasses are in a mode this phone can\'t send. Hold their 2D/3D button, or unplug and replug them.</string>
|
||||
<string name="glasses_3d_refresh">3D refresh rate</string>
|
||||
<string name="glasses_auto3d">3D for VR games</string>
|
||||
<string name="glasses_auto3d_hint">Switches to 3D while SteamVR runs, and back after.</string>
|
||||
<string name="glasses_picture">3D picture</string>
|
||||
<string name="glasses_picture_hint">Automatic: SteamVR fills the view; other games hang as a screen in 3D and stay flat in 2D.</string>
|
||||
<string name="glasses_picture">Picture</string>
|
||||
<string name="glasses_picture_hint">Automatic shows flat content in both eyes and detects SteamVR. Choose Side-by-side game for SBS content.</string>
|
||||
<string name="glasses_picture_auto">Automatic</string>
|
||||
<string name="glasses_picture_screen">Virtual screen</string>
|
||||
<string name="glasses_picture_sbs">Side-by-side game</string>
|
||||
<string name="glasses_screen_size">Screen width</string>
|
||||
<string name="glasses_screen_distance">Screen distance</string>
|
||||
<string name="glasses_screen_next_session">Width and distance apply when a game runs on the glasses as a virtual screen.</string>
|
||||
<string name="glasses_screen_app_wide">Width and distance update the tracked virtual screen for DroidDeck menus, games and desktop sessions immediately.</string>
|
||||
<string name="glasses_screen_no_output">These settings apply while Game on glasses is enabled and the game is displayed there.</string>
|
||||
<string name="glasses_screen_flat_hint">Automatic keeps this 2D game full-screen. Use a virtual screen to adjust its width, distance and head tracking.</string>
|
||||
<string name="glasses_screen_use">Use virtual screen</string>
|
||||
<string name="glasses_screen_direct_hint">SteamVR fills the view. Adjust its field of view below; width and distance apply only to a virtual screen.</string>
|
||||
<string name="glasses_screen_direct_hint">SteamVR fills the view. Adjust its field of view in VR; width and distance apply only to a virtual screen.</string>
|
||||
<string name="glasses_screen_sbs_hint">Side-by-side games fill each eye. Width and distance apply only to a virtual screen.</string>
|
||||
<string name="glasses_tracking_flat_hint">Automatic keeps this 2D game fixed in view. Choose Virtual screen in Display to use head tracking.</string>
|
||||
<string name="glasses_tracking_sbs_hint">Head tracking applies to a virtual screen or a running SteamVR game.</string>
|
||||
<string name="glasses_hardware">Glasses</string>
|
||||
<string name="glasses_hardware">Device</string>
|
||||
<string name="glasses_brightness">Brightness</string>
|
||||
<string name="glasses_volume">Volume</string>
|
||||
<string name="glasses_sunblock">Sunblock</string>
|
||||
<string name="glasses_sunblock_hint">Darkens the front lenses.</string>
|
||||
<string name="glasses_tracking">Head tracking</string>
|
||||
<string name="glasses_tracking">Tracking</string>
|
||||
<string name="glasses_head_tracking">Head tracking</string>
|
||||
<string name="glasses_head_tracking_hint">The glasses\' own sensors turn the virtual screen and SteamVR with your head.</string>
|
||||
<string name="glasses_head_tracking_spatial_vr_hint">Positional tracking includes head rotation in SteamVR. For rotation-only tracking, turn off positional tracking.</string>
|
||||
<string name="glasses_head_tracking_spatial_hint">Controls head movement on the virtual screen. Positional tracking includes head rotation in SteamVR.</string>
|
||||
<string name="glasses_quick_actions">Quick actions</string>
|
||||
<string name="glasses_recenter">Recenter view</string>
|
||||
<string name="glasses_recenter_button">Recenter</string>
|
||||
<string name="glasses_recenter_screen_hint">Look where you want the screen, then recenter to set its height and direction.</string>
|
||||
<string name="glasses_recenter_button">Recenter Screen</string>
|
||||
<string name="glasses_recenter_joycons_button">Recenter Joy-Cons</string>
|
||||
<string name="glasses_vr_fov">SteamVR field of view</string>
|
||||
<string name="glasses_vr_fov_hint">Lower brings SteamVR closer and fills the glasses; higher shows more around you.</string>
|
||||
<string name="glasses_playing">Playing on %1$s</string>
|
||||
@@ -2467,8 +2497,9 @@
|
||||
<string name="glasses_calibration_reset_hint">Remove the saved calibration and restore the model defaults? Recenter after putting the glasses back on.</string>
|
||||
<string name="glasses_calibration_reset_button">Reset</string>
|
||||
<string name="hand_camera_group">Hand tracking</string>
|
||||
<string name="hand_camera_prompt_title">Track your hands with the camera?</string>
|
||||
<string name="hand_camera_prompt_body">The camera can see your hands. With no controller connected, your bare hands become the VR hands: pinch your thumb and index finger to click, close your hand to grab, and turn your palm toward you and pinch to open the menu. With Joy-Cons, it puts them where your hands really are. Pictures are processed on this device and never saved or sent.</string>
|
||||
<string name="phone_camera_tracking_group">Phone camera — Experimental</string>
|
||||
<string name="hand_camera_prompt_title">Track hands or Joy-Cons with the phone camera?</string>
|
||||
<string name="hand_camera_prompt_body">With no controller connected, the phone camera tracks your bare hands in VR: pinch your thumb and index finger to click, close your hand to grab, and turn your palm toward you and pinch to open the menu. With paired Joy-Cons, the camera tracks their position while the Joy-Cons provide rotation and button inputs. Pictures are processed on this device and never saved or sent.</string>
|
||||
<string name="hand_camera_rear">Back camera</string>
|
||||
<string name="hand_camera_rear_hint">Recommended. Usually sharper and wider.</string>
|
||||
<string name="hand_camera_front">Front camera</string>
|
||||
@@ -2476,7 +2507,8 @@
|
||||
<string name="hand_camera_allow">Use camera</string>
|
||||
<string name="hand_camera_not_now">Not now</string>
|
||||
<string name="hand_camera_setting">Camera hand tracking</string>
|
||||
<string name="hand_camera_setting_hint">With no controller connected, your hands become the VR hands: pinch to click, palm toward you and pinch for the menu. With Joy-Cons, it places them where the camera sees them. Pictures stay on this device.</string>
|
||||
<string name="phone_camera_tracking_setting">Track hands or Joy-Cons</string>
|
||||
<string name="hand_camera_setting_hint">Use the phone camera for bare-hand gestures or to position paired Joy-Cons in VR. Joy-Cons provide rotation and button inputs. Pauses while the glasses track your hands or Joy-Cons. Pictures stay on this device.</string>
|
||||
<string name="hand_camera_choice">Camera</string>
|
||||
<string name="hand_camera_access">Camera access</string>
|
||||
<string name="hand_camera_access_hint">Allow camera access so hand tracking can start.</string>
|
||||
@@ -2508,6 +2540,15 @@
|
||||
<string name="display_position_top">Top</string>
|
||||
<string name="display_position_bottom">Bottom</string>
|
||||
<string name="display_position_center">Center (default)</string>
|
||||
<string name="glasses_6dof">6DoF virtual screen</string>
|
||||
<string name="glasses_position">Positional tracking — experimental</string>
|
||||
<string name="glasses_position_hint">Physical movement in VR and around virtual screens. Restarting tracking takes a moment.</string>
|
||||
<string name="glasses_eye_height">Current eye height above floor</string>
|
||||
<string name="glasses_floor">Set floor from current height</string>
|
||||
<string name="glasses_floor_set">Set floor</string>
|
||||
<string name="glasses_spatial_setup">Stereo camera setup and diagnostics</string>
|
||||
<string name="glasses_spatial_setup_hint">Check camera calibration and hand tracking before playing.</string>
|
||||
<string name="glasses_spatial_open">Open setup</string>
|
||||
<string name="setup_tab_storage">Storage</string>
|
||||
<string name="storage_measuring">Measuring storage…</string>
|
||||
<string name="storage_measuring_hint">This takes a few seconds the first time.</string>
|
||||
@@ -2678,6 +2719,26 @@
|
||||
<item quantity="one">%d app</item>
|
||||
<item quantity="other">%d apps</item>
|
||||
</plurals>
|
||||
<string name="glasses_hands">Bare-hand controllers</string>
|
||||
<string name="glasses_hands_hint">Use the glasses cameras to aim with your hands, pinch to click and close your hand to grab in VR. Gamepad sticks move and turn. Replaces Joy-Con position tracking. May lag or lose tracking during games.</string>
|
||||
<string name="glasses_hands_ready_hint">Enable Bare-hand controllers under Luma Ultra cameras in Tracking. Show open hands first.</string>
|
||||
<string name="glasses_hands_base">Shared Luma Ultra calibration</string>
|
||||
<string name="glasses_hands_base_hint">Using the shared Luma Ultra base. Calibrate your own glasses to verify their accuracy.</string>
|
||||
<string name="glasses_hands_calibration_verified">Measured calibration verified</string>
|
||||
<string name="glasses_hands_calibration_required">Validation required</string>
|
||||
<string name="glasses_hands_calibration_required_hint">Hand controllers become available after the measured distance check passes.</string>
|
||||
<string name="tracking_recovery_lost">Tracking lost</string>
|
||||
<string name="tracking_recovery_look">Look around slowly in a well-lit room.\nKeep the tracking cameras clear and face furniture or other visible detail.</string>
|
||||
<string name="tracking_recovery_restart_help">Still stuck? On your phone: Glasses → Tracking → Open setup → Show diagnostics → Restart tracking.</string>
|
||||
<string name="tracking_recovery_disconnected">Glasses disconnected</string>
|
||||
<string name="tracking_recovery_connect">Check the USB connection and reconnect the glasses.\nAccept the USB-access prompt on your phone if it appears.</string>
|
||||
<string name="tracking_recovery_usb_help">Once connected, look around slowly in a well-lit room to restore tracking.</string>
|
||||
<string name="tracking_recovery_recenter">Recenter needed</string>
|
||||
<string name="tracking_recovery_recenter_steps">Tracking has returned in a new position.\nLook forward, then tap Recenter on your phone.</string>
|
||||
<string name="tracking_recovery_recenter_help">You can also find Recenter in Glasses → Tracking → Open setup. Your saved camera calibration is kept.</string>
|
||||
<string name="tracking_recovery_stabilizing">Hold still for a moment</string>
|
||||
<string name="tracking_recovery_hold">Recenter is in progress.\nKeep the glasses steady while tracking settles.</string>
|
||||
<string name="tracking_recovery_automatic">This screen closes automatically when head tracking is ready.</string>
|
||||
<string name="boot_movie">Boot movie</string>
|
||||
<string name="boot_movie_video">Movie</string>
|
||||
<string name="boot_movie_droiddeck">DroidDeck · %1$d fps</string>
|
||||
@@ -2695,4 +2756,147 @@
|
||||
<string name="boot_movie_converting_started">Converting %1$s for Steam. Keep DroidDeck open.</string>
|
||||
<string name="boot_movie_unsupported">This device cannot decode that video.</string>
|
||||
<string name="boot_movie_import_failed">Could not import that movie</string>
|
||||
<string name="glasses_steady_hand_aim">Steady hand aim</string>
|
||||
<string name="glasses_steady_hand_aim_hint">Aim from your shoulder through your palm. Turn off for wrist-controlled rotation.</string>
|
||||
<string name="spatial_title">Spatial setup</string>
|
||||
<string name="spatial_wait_tracking">Waiting for tracking…</string>
|
||||
<string name="spatial_cameras_description">Left and right tracking cameras</string>
|
||||
<string name="spatial_camera_sync">Camera synchronization</string>
|
||||
<string name="spatial_ready">Ready</string>
|
||||
<string name="spatial_sync_hint">Waiting for camera and head tracking to line up. Keep the glasses connected.</string>
|
||||
<string name="spatial_prepare">1. Prepare the board</string>
|
||||
<string name="spatial_print_actual">Print at actual size</string>
|
||||
<string name="spatial_print_hint">Each square must measure 30 mm (1.181 in). Mount the sheet flat on a rigid surface in a well-lit area.</string>
|
||||
<string name="spatial_print">Print board</string>
|
||||
<string name="spatial_capture_group">2. Capture different views</string>
|
||||
<string name="spatial_board_stationary">Keep the board stationary</string>
|
||||
<string name="spatial_capture_hint">Move the glasses closer, farther and sideways. Turn them left/right, angle them up/down, and tilt them sideways. Keep the board in both cameras and pause briefly before each capture.</string>
|
||||
<string name="spatial_start">Start new calibration</string>
|
||||
<string name="spatial_wait_sync">Waiting for camera synchronization.</string>
|
||||
<string name="spatial_start_hint">Start a new calibration to collect views.</string>
|
||||
<string name="spatial_views_hint">Keep the board visible in both previews. Capture at least 24 sharp views from different angles.</string>
|
||||
<string name="spatial_capturing">Capturing…</string>
|
||||
<string name="spatial_capture">Capture board view</string>
|
||||
<string name="spatial_alignment">Calculate camera alignment</string>
|
||||
<string name="spatial_calculating">Calculating…</string>
|
||||
<string name="spatial_calculate">Calculate calibration</string>
|
||||
<string name="spatial_distance_group">3. Check the distance</string>
|
||||
<string name="spatial_distance">Measured distance</string>
|
||||
<string name="spatial_distance_hint">Start with 12 in or 30 cm so the printed markers are easier to detect. Choose the exact measurement you will use.</string>
|
||||
<string name="spatial_camera_board_distance">Left camera to board center</string>
|
||||
<string name="spatial_checking_distance">Checking distance…</string>
|
||||
<string name="spatial_validate">Validate distance</string>
|
||||
<string name="spatial_diagnostics">Diagnostics</string>
|
||||
<string name="spatial_show_diagnostics">Show diagnostics</string>
|
||||
<string name="spatial_diagnostics_hint">Camera timing and tracking recovery tools.</string>
|
||||
<string name="spatial_camera_timing">Camera timing</string>
|
||||
<string name="spatial_hand_input">Hand input</string>
|
||||
<string name="spatial_wait_timing">Waiting for camera timing.</string>
|
||||
<string name="spatial_frames">Frames</string>
|
||||
<string name="spatial_gpu">GPU hand inference</string>
|
||||
<string name="spatial_gpu_hint">CPU is the default. GPU is experimental and can cause SteamVR to restart. This choice resets when tracking restarts.</string>
|
||||
<string name="spatial_lite">Lite hand models</string>
|
||||
<string name="spatial_lite_hint">Use the Lite palm detector and Lite hand landmarks. Check aiming, pinch and grab accuracy. Resets when tracking restarts.</string>
|
||||
<string name="spatial_adaptive">Automatic hand input rate</string>
|
||||
<string name="spatial_adaptive_hint">Adjust input to processing speed. Resets when tracking restarts.</string>
|
||||
<string name="spatial_half_rate">Limit hand input rate</string>
|
||||
<string name="spatial_half_rate_hint">Use half the camera frames. Turn off to compare the full rate. Resets when tracking restarts.</string>
|
||||
<string name="spatial_diagnostic_capture">Diagnostic capture</string>
|
||||
<string name="spatial_diagnostic_capture_hint">Save one stereo frame locally. Images are saved only when requested.</string>
|
||||
<string name="spatial_save_frame">Save frame</string>
|
||||
<string name="spatial_restart_tracking">Restart tracking</string>
|
||||
<string name="spatial_restart_hint">Use if tracking does not recover in a well-lit area. A restart requires a new tracking origin.</string>
|
||||
<string name="spatial_restart">Restart</string>
|
||||
<string name="spatial_restart_title">Restart tracking?</string>
|
||||
<string name="spatial_restart_confirm">Unsaved calibration views will be lost. Keep the glasses still afterward and recenter when tracking returns.</string>
|
||||
<string name="spatial_views_count">%1$d / 24 views captured</string>
|
||||
<string name="spatial_capture_paused">Capture paused: %1$s</string>
|
||||
<string name="spatial_measure_hint">Measure %1$s. Show the complete board in both previews, then hold still.</string>
|
||||
<string name="spatial_timing_values">%1$.1f Hz • frame age %2$.1f ms • processing %3$.1f ms</string>
|
||||
<string name="spatial_input_values">Input limit %1$.1f Hz • %2$.0f%% of camera frames. Head tracking stays at full rate.</string>
|
||||
<string name="spatial_frame_counts">%1$d processed • %2$d dropped • %3$d skipped by input limit</string>
|
||||
<string name="spatial_print_job">DroidDeck ChArUco 30 mm</string>
|
||||
<string name="spatial_print_title">DroidDeck - Luma Ultra calibration</string>
|
||||
<string name="spatial_print_scale" formatted="false">Print at 100% / Actual size. Each square: 30 mm (1.181 in).</string>
|
||||
<string name="spatial_print_stationary">Keep the board flat and stationary; move the glasses between captures.</string>
|
||||
<string name="spatial_print_check">Scale check: 100 mm (3.937 in) between ticks</string>
|
||||
<string name="spatial_distance_12in">12 in (30.48 cm)</string>
|
||||
<string name="spatial_distance_30cm">30 cm (11.81 in)</string>
|
||||
<string name="spatial_distance_20in">20 in (50.8 cm)</string>
|
||||
<string name="spatial_distance_50cm">50 cm (19.69 in)</string>
|
||||
<string name="spatial_disabled">Disabled</string>
|
||||
<string name="spatial_wait_stable">Waiting for stable tracking</string>
|
||||
<string name="spatial_disconnected">Disconnected</string>
|
||||
<string name="spatial_hands_off">Hand controllers are off</string>
|
||||
<string name="spatial_tracking_off">Positional tracking is off or glasses are disconnected</string>
|
||||
<string name="spatial_recenter_pending">Recenter requested — hold still while tracking stabilizes</string>
|
||||
<string name="spatial_tracking_lost">Tracking lost — face a well-lit area with visible detail</string>
|
||||
<string name="spatial_origin_changed">Tracking origin changed — tap Recenter, then hold still</string>
|
||||
<string name="spatial_active">6DoF active</string>
|
||||
<string name="spatial_connect_hint">Connect Luma Ultra and enable positional tracking.</string>
|
||||
<string name="spatial_validation_session">Calibration verified for this connection.</string>
|
||||
<string name="spatial_validation_saved">Calibration verified and saved.</string>
|
||||
<string name="spatial_wait_cameras">Waiting for stereo cameras</string>
|
||||
<string name="spatial_wait_hands">Waiting for hand tracking</string>
|
||||
<string name="spatial_collect_instructions">Keep the 5 × 7 board stationary. Capture 24+ views while moving and rotating the glasses.</string>
|
||||
<string name="spatial_capture_pending">Waiting for the next camera image. Hold the glasses still.</string>
|
||||
<string name="spatial_validation_pending">Checking the next camera image. Keep the full board visible and hold still.</string>
|
||||
<string name="spatial_start_first">Start calibration first</string>
|
||||
<string name="spatial_no_camera_frame">No fresh camera image arrived. Check the glasses connection and camera previews, then retry.</string>
|
||||
<string name="spatial_clock_reset">Camera clock reset</string>
|
||||
<string name="spatial_frame_changed">Tracking frame changed. Your views are saved for recalculation. Recenter, then start a new set to capture more views.</string>
|
||||
<string name="spatial_device_loaded">device calibration loaded</string>
|
||||
<string name="spatial_base_loaded">Luma Ultra base calibration loaded</string>
|
||||
<string name="spatial_calibration_needed">calibration required</string>
|
||||
<string name="spatial_tap_start">Tap Start new calibration first.</string>
|
||||
<string name="spatial_capture_recenter_pending">Recenter is waiting for steady tracking. Hold still for a moment.</string>
|
||||
<string name="spatial_capture_recenter">Tracking changed. Tap Recenter once, then hold still before capturing.</string>
|
||||
<string name="spatial_capture_unsynchronized">Capture rejected: head tracking was out of sync, or it changed during capture. Hold still and try again.</string>
|
||||
<string name="spatial_align_first">Calculate camera alignment before checking the distance.</string>
|
||||
<string name="spatial_processing_failed">camera processing failed</string>
|
||||
<string name="spatial_hand_head_changed">Head tracking changed during hand detection</string>
|
||||
<string name="spatial_hand_wait_sync">Waiting for camera and head synchronization</string>
|
||||
<string name="spatial_no_wrists">No wrists detected. Keep your Joy-Con grips in front of the glasses</string>
|
||||
<string name="spatial_no_hands">No hands detected. Show open palms in front of the glasses</string>
|
||||
<string name="spatial_one_camera_wrists">Wrists visible in only one camera; keep your grips in the shared view</string>
|
||||
<string name="spatial_one_camera_hands">Hands visible in only one camera; keep both palms in the shared view</string>
|
||||
<string name="spatial_ambiguous_hands">Both cameras see hands, but left/right matching is ambiguous</string>
|
||||
<string name="spatial_inconsistent_depth">Hands detected, but stereo depth is inconsistent</string>
|
||||
<string name="spatial_rejected_wrist">Wrist position rejected by stereo or motion checks</string>
|
||||
<string name="spatial_inconsistent_palm">Stereo points detected, but palm geometry is inconsistent</string>
|
||||
<string name="spatial_hands_need_calibration">Complete calibration and the distance check to enable hands</string>
|
||||
<string name="spatial_hands_wait_stable">Waiting for stable head tracking; recenter if requested</string>
|
||||
<string name="spatial_old_frame">Camera observation is too old; waiting for a fresh pair</string>
|
||||
<string name="spatial_fit_ready">Fit %1$.2f px. Measure your selected distance from the left camera to the board center, then validate.</string>
|
||||
<string name="spatial_opencv_error">OpenCV unavailable: %1$s</string>
|
||||
<string name="spatial_restored">%1$d saved views restored. Calculate calibration to retry, or start a new set to capture more.</string>
|
||||
<string name="spatial_captured">Captured %1$d / 24 views. Keep the board fixed; move the glasses for the next view.</string>
|
||||
<string name="spatial_capture_corners">Capture rejected: %1$d / 12 required corners visible in both cameras. Show more of the board, hold still, then try again.</string>
|
||||
<string name="spatial_validation_error">Distance check could not finish: %1$s. Try again.</string>
|
||||
<string name="spatial_inference_error">Hand detection unavailable: %1$s. Change CPU/GPU or toggle hand controllers to retry.</string>
|
||||
<string name="spatial_hand_timeout">Hand detection exceeded %1$d ms; observation discarded</string>
|
||||
<string name="spatial_wrists_tracked">%1$d / 2 Joy-Con wrist positions measured by stereo</string>
|
||||
<string name="spatial_palms_tracked">%1$d / 2 palms tracked; pinch ready: %2$d; grip ready: %3$d</string>
|
||||
<string name="spatial_capture_saved">Saved diagnostic capture to %1$s</string>
|
||||
<string name="spatial_hand_error">Hand tracking stopped: %1$s</string>
|
||||
<string name="spatial_stereo_loaded">Stereo %1$d×%2$d; %3$s</string>
|
||||
<string name="spatial_alignment_error">Head tracking and the board disagree by %1$s (limit 5 cm / 2 in). Keep the board fixed and wait for steady tracking before starting a new set. Turn and tilt the glasses gently; pause before each capture.</string>
|
||||
<string name="spatial_need_views">Capture at least 24 varied views of the stationary board.</string>
|
||||
<string name="spatial_need_rotation">Rotate the glasses through both yaw and pitch; translation alone cannot calibrate camera alignment.</string>
|
||||
<string name="spatial_bad_baseline">Implausible camera baseline</string>
|
||||
<string name="spatial_need_orientations">Move your head through more varied orientations.</string>
|
||||
<string name="spatial_bad_rotation">Invalid camera-to-head rotation</string>
|
||||
<string name="spatial_bad_alignment">Camera-to-head alignment is inconsistent.</string>
|
||||
<string name="spatial_calibration_error">Calibration could not finish. %1$s Your captured views are saved.</string>
|
||||
<string name="spatial_reprojection_error">Held-out reprojection error %1$.2f px exceeds 2 px. Recalibrate.</string>
|
||||
<string name="spatial_distance_corners">%1$d / 24 checkerboard corners detected in both cameras. Keep the full board visible and hold still. If it is already visible, select 12 in or 30 cm and measure that closer distance before retrying.</string>
|
||||
<string name="spatial_distance_depth">The board is visible, but its depth could not be measured reliably. Hold the glasses still and keep the board flat and well lit, then retry.</string>
|
||||
<string name="spatial_distance_invalid">The camera measurement was invalid. Hold still and try again.</string>
|
||||
<string name="spatial_distance_passed">Distance check passed.</string>
|
||||
<string name="spatial_distance_retry">Recheck the distance from the left camera to the board center, then retry.</string>
|
||||
<string name="spatial_distance_result">Cameras measured %1$s; selected distance %2$s. %3$s</string>
|
||||
<string name="spatial_wait_previews">Wait for both camera previews before starting calibration.</string>
|
||||
<string name="spatial_saved_views_hint">Saved views can be recalculated. Start a new calibration to capture in the current tracking frame.</string>
|
||||
<string name="spatial_model_checksum_error">Hand model checksum mismatch</string>
|
||||
<string name="spatial_opencv_load_error">OpenCV could not load</string>
|
||||
</resources>
|
||||
Reference in new issue
Block a user