Add app-wide 3DoF for VITURE, RayNeo and XREAL glasses and 6DoF for Luma Ultra (#1035)

* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Add experimental Luma tracking and stabilize SteamVR launches

Add native Luma Ultra spatial tracking, optical controllers, and stereo
calibration with DroidDeck styling, imperial/metric measurements, and
pending recenter recovery. Include the pinned hand model and calibration board.

Keep live guest and SDK files outside Android's evictable cache. Filter the
Adreno 840 sysmem override in the shared SteamVR helper, serialize timeline
mirroring, retain invalid optical controllers without event floods, and
prevent an unprivileged scheduling fallback from lowering compositor RTTIME.

Validation: latest APK build and runtime freshness checks pass; 247 affected
glasses/calibration tests pass. Native VR, helper, and packaging regressions
pass. Two earlier phone library launches sustained 60 fps for 308 and 188
seconds without recovery or restart. The newer calibration APK is installed
and checksum-verified; calibrated-hand and sustained gameplay acceptance
remain pending. One existing Android test requires Windows symlink privileges.

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

* Improve Luma Ultra tracking and isolate device-specific controls

Refine stereo hand and Joy-Con tracking, gesture release, calibration,
recovery UI, diagnostics, display modes, and compositor handling.
Keep Ultra controls and input routing behind a live SDK-confirmed Carina
connection; clear retained spatial mode when other glasses connect.
Add optional UVC transport with pinned dependencies and packaged notices.

Validation: 456 Android tests, ARM64 VR build and native regressions,
47 tooling tests, SDK/UVC-enabled and disabled builds, and 150 packaged
runtime checksums. Two shader compilation tests skipped because the
compiler is unavailable. Hardware interaction gates remain experimental.

* Delay Luma Ultra 6DoF until SteamVR settles

Suspend spatial SDK startup while SteamVR launches, then restore it two seconds
after RUNNING is confirmed. Preserve saved tracking preferences and automatically
recenter same-device restoration, including cancellation and early stop.

Discard superseded launch requests and status replies after session teardown.

Validation: 128 focused JVM tests passed on the isolated commit snapshot; 129
passed with the current local hand-tracking work. Debug build and runtime checks
passed, and the reviewed APK was installed and hash-verified on the phone.

* Clarify glasses and phone camera tracking options

Separate Luma Ultra camera controls from phone-camera tracking so the two
hand-tracking switches have clear sources. Label bare-hand controllers and
Joy-Con position tracking explicitly, explain physical Joy-Con inputs and
camera priority, and update the camera prompt and calibration guidance.

Use fresh phone section and toggle labels so existing translations do not
hide the distinction. Preserve tracking behavior and saved preferences.

Validation: 39 existing UI tests, debug build, and packaged runtime verification
passed. Reviewed changes and installed the APK on the connected phone.

* Fix tracking handoff and shared runtime regressions

Release spatial ownership and controller overrides when output returns to the phone. Preserve USB-loss recovery, keep Vulkan submissions asynchronous, clean persistent guest scratch on runtime removal, and clarify the 6DoF head-tracking control.

* Apply smart-glasses virtual screens across DroidDeck menus

* Finalize Luma hand baseline and document smart-glasses support

Keep raw grayscale-to-RGB Full hand inference, wrist-only Joy-Con reconstruction, bounded visual holds, and the dead-zone rollback. Retain opt-in steady aim, recenter controls, reproducible Lite models, and the JPEG-padding fix.

Remove unsuccessful benchmark-only and USB transport experiments. Document the cross-brand 3DoF matrix, Luma Ultra 6DoF, SDK requirements, and app-wide screen behavior.

* Fix executable permission for SteamVR launcher

* Address hand tracking and VR review findings

* Bound stereo recovery test image comparison memory

* Localize smart-glasses setup and tracking diagnostics

Move calibration controls, status messages, validation errors, distance labels,
and printed-board instructions into Android string resources. Add and update
machine-assisted translations in all 32 supported non-English locale catalogs,
with corrections for recentering, hand tracking, product names, and measurements.

Keep print instructions within the page using text layout that supports wrapping
and right-to-left text. Correct the Lite model toggle description to reflect its
Lite palm detector and Lite landmark model.

Add locale coverage, format-argument, line-break, and measurement checks, plus
French and Arabic calibration UI tests. Preserve tracking calculations and the
shared runtime storage behavior.

Validation: Android resource and Kotlin compilation; 3 localization checks;
68 focused tests; 1,597 JVM tests at a 512 MB heap; French and Arabic UI renders.

* Correct smart-glasses translations from PR review

Fix the 42 localization findings covering hand and head terminology, disabled states, calibration dimensions, camera visibility, capture rejection, and menu references. Correct the repeated capture-error ambiguity in related locales and clarify its English source. Keep Romanian setup instructions consistent with the existing informal voice.

Extend localization measurement validation to distance hints and retry guidance. Verify the recovery screen's palette-dependent text color with one row-sized pixel buffer and guaranteed bitmap cleanup.

Validation: Android resource and Kotlin compilation; 3 localization checks across all supported locales; 68 focused JVM tests at a 512 MB heap.

* Work around SteamVR device loss with Adreno 840 Turnip v0.2.0

* Withdraw ineffective SteamVR flushall workaround

---------

Co-authored-by: maxjivi05 <maxjividen@gmail.com>
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
213 files changed
+22572 -919

No files matched your search

+214 -10
View File
@@ -2341,14 +2341,14 @@
<string name="glasses_display">디스플레이</string>
<string name="glasses_refresh">주사율</string>
<string name="glasses_3d">3D (사이드 바이 사이드)</string>
<string name="glasses_3d_hint">각 눈이 3840×1080 화면의 절반씩을 봅니다. 화면이 끊기면 안경의 2D/3D 버튼을 길게 누르세요.</string>
<string name="glasses_3d_hint">스마트 안경을 사이드 바이 사이드 3D 모드로 전환합니다. 헤드 추적은 별도로 제어됩니다.</string>
<string name="glasses_3d_failed">3D 신호를 확인하지 못했습니다. 2D 화면이 돌아오면 다시 시도하세요.</string>
<string name="glasses_no_signal">화면 없음: 안경이 이 휴대폰에서 보낼 수 없는 모드에 있습니다. 2D/3D 버튼을 길게 누르거나 안경을 뺐다가 다시 연결하세요.</string>
<string name="glasses_3d_refresh">3D 주사율</string>
<string name="glasses_auto3d">VR 게임에서 3D</string>
<string name="glasses_auto3d_hint">SteamVR이 실행되는 동안 3D로 전환하고 끝나면 되돌립니다.</string>
<string name="glasses_picture">3D 화면</string>
<string name="glasses_picture_hint">자동: SteamVR은 시야 전체를 채우고, 다른 게임은 3D에서는 화면으로 떠 있고 2D에서는 평면으로 보입니다.</string>
<string name="glasses_picture">화면</string>
<string name="glasses_picture_hint">자동 모드는 양쪽 눈에 평면 콘텐츠를 표시하고 SteamVR을 감지합니다. SBS 콘텐츠의 경우 \'Side-by-side 게임\'을 선택하세요.</string>
<string name="glasses_picture_auto">자동</string>
<string name="glasses_picture_screen">가상 화면</string>
<string name="glasses_picture_sbs">사이드 바이 사이드 게임</string>
@@ -2358,20 +2358,20 @@
<string name="glasses_screen_no_output">이 설정은 “안경에 게임 표시”가 켜져 있고 게임이 안경에 표시될 때 적용됩니다.</string>
<string name="glasses_screen_flat_hint">“자동”에서는 이 2D 게임이 전체 화면으로 유지됩니다. 너비, 거리, 헤드 트래킹을 조정하려면 가상 화면을 사용하세요.</string>
<string name="glasses_screen_use">가상 화면 사용</string>
<string name="glasses_screen_direct_hint">SteamVR이 시야를 가득 채웁니다. 아래에서 시야각을 조정하세요. 너비와 거리는 가상 화면에만 적용됩니다.</string>
<string name="glasses_screen_direct_hint">SteamVR은 화면을 가득 채웁니다. VR 환경에서 시야각을 조정하세요. 너비와 거리는 가상 화면에만 적용됩니다.</string>
<string name="glasses_screen_sbs_hint">사이드 바이 사이드 게임은 양쪽 눈의 시야를 각각 가득 채웁니다. 너비와 거리는 가상 화면에만 적용됩니다.</string>
<string name="glasses_tracking_flat_hint">“자동”에서는 이 2D 게임이 시야에 고정됩니다. 헤드 트래킹을 사용하려면 “디스플레이”에서 “가상 화면”을 선택하세요.</string>
<string name="glasses_tracking_sbs_hint">헤드 트래킹은 가상 화면이나 실행 중인 SteamVR 게임에 적용됩니다.</string>
<string name="glasses_hardware">안경</string>
<string name="glasses_hardware">장치</string>
<string name="glasses_brightness">밝기</string>
<string name="glasses_volume">볼륨</string>
<string name="glasses_sunblock">선블록</string>
<string name="glasses_sunblock_hint">앞쪽 렌즈를 어둡게 합니다.</string>
<string name="glasses_tracking">헤드 트래킹</string>
<string name="glasses_tracking">추적</string>
<string name="glasses_head_tracking">헤드 트래킹</string>
<string name="glasses_head_tracking_hint">안경의 센서가 머리 움직임에 맞춰 가상 화면과 SteamVR을 돌립니다.</string>
<string name="glasses_recenter">시점 재설정</string>
<string name="glasses_recenter_button">중앙 맞추기</string>
<string name="glasses_recenter_button">화면 중심 재설정</string>
<string name="glasses_vr_fov">SteamVR 시야각</string>
<string name="glasses_vr_fov_hint">낮추면 SteamVR이 가까워져 안경을 가득 채우고, 높이면 주변이 더 넓게 보입니다.</string>
<string name="glasses_playing">%1$s에서 플레이 중</string>
@@ -2392,8 +2392,8 @@
<string name="glasses_calibration_reset_hint">저장된 보정을 삭제하고 모델 기본값으로 되돌릴까요? 안경을 다시 쓴 후 중앙을 맞추세요.</string>
<string name="glasses_calibration_reset_button">초기화</string>
<string name="hand_camera_group">핸드 트래킹</string>
<string name="hand_camera_prompt_title">카메라로 손을 트래킹할까요?</string>
<string name="hand_camera_prompt_body">카메라가 손을 볼 수 있습니다. 컨트롤러가 연결되어 있지 않으면 맨손이 그대로 VR 손이 됩니다. 엄지와 검지를 맞대면 클릭, 손을 쥐면 잡기, 손바닥을 자신 쪽으로 향하고 맞대면 메뉴가 열립니다. Joy-Con을 쓸 때는 손이 실제로 있는 위치에 배치합니다. 영상은 이 기기에서 처리되며 저장되거나 전송되지 않습니다.</string>
<string name="hand_camera_prompt_title">스마트폰 카메라로 손 또는 Joy-Con 컨트롤러 추적?</string>
<string name="hand_camera_prompt_body">컨트롤러가 연결되지 않은 경우, 스마트폰 카메라가 VR 환경에서 맨손을 추적합니다. 엄지와 검지를 오므려 클릭, 손을 오므려 잡기, 손바닥을 자신 쪽으로 돌리고 오므려 메뉴를 엽니다. Joy-Con 컨트롤러가 연결된 경우, 카메라가 컨트롤러의 위치를 ​​추적하는 동안 Joy-Con 컨트롤러는 회전 및 버튼 입력을 제공합니다. 사진은 이 기기에서 처리되며 저장되거나 전송되지 않습니다.</string>
<string name="hand_camera_rear">후면 카메라</string>
<string name="hand_camera_rear_hint">권장합니다. 보통 더 선명하고 화각이 넓습니다.</string>
<string name="hand_camera_front">전면 카메라</string>
@@ -2401,7 +2401,7 @@
<string name="hand_camera_allow">카메라 사용</string>
<string name="hand_camera_not_now">나중에</string>
<string name="hand_camera_setting">카메라 핸드 트래킹</string>
<string name="hand_camera_setting_hint">컨트롤러가 연결되어 있지 않으면 손이 VR 손이 됩니다. 손가락을 맞대면 클릭, 손바닥을 자신 쪽으로 향하고 맞대면 메뉴입니다. Joy-Con은 카메라가 보는 위치에 배치합니다. 영상은 이 기기 밖으로 나가지 않습니다.</string>
<string name="hand_camera_setting_hint">휴대폰 카메라를 사용하여 맨손 제스처를 사용하거나 VR에서 페어링된 Joy-Con 컨트롤러의 위치를 ​​조정합니다. Joy-Con 컨트롤러는 회전 및 버튼 입력을 제공합니다. 스마트 안경이 손이나 Joy-Con 컨트롤러를 추적하는 동안 일시 중지됩니다. 이미지는 이 기기에서만 처리됩니다.</string>
<string name="hand_camera_choice">카메라</string>
<string name="hand_camera_access">카메라 권한</string>
<string name="hand_camera_access_hint">핸드 트래킹을 시작하려면 카메라 권한을 허용하세요.</string>
@@ -2655,4 +2655,208 @@
<string name="boot_movie_converting_started">Steam용으로 %1$s 변환 중입니다. DroidDeck을 열어 두세요.</string>
<string name="boot_movie_unsupported">이 기기에서 해당 동영상을 디코딩할 수 없습니다.</string>
<string name="boot_movie_import_failed">동영상을 가져오지 못했습니다</string>
<string name="glasses_experimental">Luma Ultra 카메라 — 실험적 기능</string>
<string name="glasses_joycons">Joy-Con 위치 추적</string>
<string name="glasses_joycons_hint">스마트 안경 카메라를 사용하여 페어링된 Joy-Con 컨트롤러의 위치를 ​​조정합니다. 회전 및 버튼 입력은 Joy-Con 컨트롤러에서 이루어집니다. 손목이 가려진 경우 위치가 추정됩니다. 맨손으로 조작하는 컨트롤러를 대체하며, 휴대폰 카메라 추적이 일시 중지됩니다. 추적 센터를 연결하거나 재설정할 때는 Joy-Con 컨트롤러를 앞쪽으로 향하게 하십시오.</string>
<string name="glasses_joycons_requires_position">위치 추적을 먼저 활성화해야 합니다. Android 12 이상에서 모션 기능을 지원하는 Joy-Con 컨트롤러가 필요합니다. 기본적으로 비활성화되어 있습니다.</string>
<string name="setup_tab_glasses">스마트 안경</string>
<string name="setup_glasses_scope">디스플레이 및 헤드 트래킹 설정은 DroidDeck 메뉴, 게임 및 데스크톱 세션에서 공유됩니다.</string>
<string name="setup_glasses_connect">스마트 안경을 연결하여 디스플레이 및 추적 설정을 변경하십시오. 연결을 해제해도 저장된 설정이 유지됩니다.</string>
<string name="glasses_vr">VR</string>
<string name="glasses_display_mode">표시 모드</string>
<string name="glasses_output_2d">2D 출력</string>
<string name="glasses_output_3d">3D 출력</string>
<string name="glasses_picture_group">화면 및 가상 화면</string>
<string name="glasses_position_group">위치 및 층수</string>
<string name="glasses_hands_group">손 추적 - 실험적 기능</string>
<string name="glasses_tracking_status">추적 상태</string>
<string name="glasses_resolution_2d">2D 해상도</string>
<string name="glasses_resolution_3d">3D 해상도</string>
<string name="glasses_resolution_vr">VR 해상도</string>
<string name="glasses_resolution_auto">자동</string>
<string name="glasses_resolution_inherit">2D/3D 동일</string>
<string name="glasses_resolution_hint">눈별 출력 해상도</string>
<string name="glasses_refresh_30_hint">스마트 안경에서 게임 기능을 활성화하여 디스플레이의 기본 30Hz 모드를 선택합니다.</string>
<string name="glasses_3dof">3DoF 가상 화면</string>
<string name="glasses_3dof_hint">플랫 게임을 정면에 고정하여 주변을 둘러볼 수 있습니다. 3D 모드로 전환하지 않고도 스마트 안경에서 게임 기능을 활성화할 수 있습니다.</string>
<string name="glasses_screen_app_wide">너비와 거리는 DroidDeck 메뉴, 게임 및 데스크톱 세션에 대해 추적된 가상 화면을 즉시 업데이트합니다.</string>
<string name="glasses_head_tracking_spatial_vr_hint">위치 추적은 SteamVR에서 머리 회전을 포함합니다. 회전만 추적하려면 위치 추적을 끄세요.</string>
<string name="glasses_head_tracking_spatial_hint">가상 화면에서 머리 움직임을 제어합니다. 위치 추적은 SteamVR에서 머리 회전을 포함합니다.</string>
<string name="glasses_quick_actions">빠른 실행</string>
<string name="glasses_recenter_screen_hint">화면을 표시할 위치를 바라본 다음 추적 센터를 재설정하여 높이와 방향을 설정합니다.</string>
<string name="glasses_recenter_joycons_button">Joy-Con 중심 재설정</string>
<string name="phone_camera_tracking_group">스마트폰 카메라 - 실험적 기능</string>
<string name="phone_camera_tracking_setting">손 또는 Joy-Con 컨트롤러 추적</string>
<string name="glasses_position">위치 추적 - 실험적 기능</string>
<string name="glasses_position_hint">VR 및 가상 화면 주변에서의 물리적 움직임. 추적을 다시 시작하면 잠시 시간이 걸립니다.</string>
<string name="glasses_eye_height">현재 눈높이(바닥 위)</string>
<string name="glasses_floor">현재 높이에서 바닥 높이 설정</string>
<string name="glasses_floor_set">바닥 높이 설정</string>
<string name="glasses_spatial_setup">스테레오 카메라 설정 및 진단</string>
<string name="glasses_spatial_setup_hint">게임 시작 전 카메라 보정 및 손 추적을 확인하세요.</string>
<string name="glasses_spatial_open">설정 열기</string>
<string name="glasses_hands">맨손으로 조작하는 컨트롤러</string>
<string name="glasses_hands_hint">스마트 안경 카메라를 사용하여 VR에서 손으로 조준하고, 엄지와 검지를 오므려 클릭하고, 손을 오므려 잡으세요. 게임패드 스틱으로 이동하고 방향을 바꿀 수 있습니다. Joy-Con 위치 추적을 대체합니다. 게임 중 지연이 발생하거나 추적이 끊길 수 있습니다.</string>
<string name="glasses_hands_ready_hint">추적 설정에서 Luma Ultra 카메라 아래에 맨손으로 조작하는 컨트롤러를 활성화합니다. 먼저 손을 펼친 상태를 표시합니다.</string>
<string name="glasses_hands_base">Luma Ultra 공유 보정</string>
<string name="glasses_hands_base_hint">Luma Ultra 공유 베이스 사용 스마트 안경의 정확도를 확인하려면 직접 보정하십시오.</string>
<string name="glasses_hands_calibration_verified">측정된 보정 확인됨</string>
<string name="glasses_hands_calibration_required">검증 필요</string>
<string name="glasses_hands_calibration_required_hint">측정 거리 확인이 완료되면 맨손으로 조작하는 컨트롤러를 사용할 수 있습니다.</string>
<string name="tracking_recovery_lost">추적 실패</string>
<string name="tracking_recovery_disconnected">스마트 안경 연결이 끊어졌습니다.</string>
<string name="spatial_capturing">캡처하는 중…</string>
<string name="spatial_camera_board_distance">왼쪽 카메라에서 보정 대상 중심까지의 거리</string>
<string name="spatial_checking_distance">거리 확인 중…</string>
<string name="spatial_validate">거리 확인</string>
<string name="spatial_diagnostics">진단</string>
<string name="spatial_camera_timing">카메라 타이밍</string>
<string name="spatial_frames">카메라 이미지</string>
<string name="spatial_lite">Lite 손 추적 모델</string>
<string name="spatial_lite_hint">Lite 손바닥 감지 모델과 Lite 손 랜드마크 모델을 사용합니다. 조준, 집기 및 잡기 동작의 정확도를 확인하세요. 추적을 다시 시작하면 초기화됩니다.</string>
<string name="spatial_adaptive">손 추적을 위한 자동 입력 주파수</string>
<string name="spatial_adaptive_hint">입력을 처리 속도로 조정합니다. 추적이 다시 시작되면 재설정됩니다.</string>
<string name="spatial_save_frame">카메라 이미지 저장</string>
<string name="spatial_restart_tracking">추적 다시 시작</string>
<string name="spatial_restart_hint">조명이 밝은 곳에서 추적이 복구되지 않는 경우 사용합니다. 다시 시작하려면 새로운 추적 원본이 필요합니다.</string>
<string name="spatial_restart">재시작</string>
<string name="spatial_restart_title">추적을 다시 시작하시겠습니까?</string>
<string name="spatial_restart_confirm">저장하지 않은 보정 이미지가 삭제됩니다. 다시 시작한 뒤에는 안경을 움직이지 말고, 추적이 복구되면 중심을 재설정하세요.</string>
<string name="spatial_views_count">%1$d / 24개 보정 이미지 촬영됨</string>
<string name="spatial_timing_values">%1$.1fHz • 이미지 수명 %2$.1fms • 처리 중 %3$.1fms</string>
<string name="spatial_input_values">카메라 이미지의 입력 제한 %1$.1fHz • %2$.0f%%. 머리 추적은 최대 빈도로 계속됩니다.</string>
<string name="spatial_frame_counts">%1$d 처리됨 • %2$d 삭제됨 • 입력 제한으로 인해 %3$d 건너뛰음</string>
<string name="spatial_print_job">DroidDeck ChArUco 30 mm</string>
<string name="spatial_print_title">DroidDeck - Luma Ultra 보정</string>
<string name="spatial_print_check">눈금 확인: 눈금 간 100mm(3.937인치)</string>
<string name="spatial_distance_12in">30.48cm(12인치)</string>
<string name="spatial_distance_30cm">30cm(11.81인치)</string>
<string name="spatial_distance_20in">50.8cm(20인치)</string>
<string name="spatial_distance_50cm">50cm(19.69인치)</string>
<string name="spatial_disabled">비활성화됨</string>
<string name="spatial_wait_stable">안정적인 추적을 기다리는 중</string>
<string name="spatial_disconnected">연결 끊김</string>
<string name="spatial_hands_off">맨손으로 조작하는 컨트롤러는 꺼짐</string>
<string name="spatial_tracking_off">위치 추적이 꺼져 있거나 스마트 안경이 연결되지 않은 경우</string>
<string name="spatial_recenter_pending">추적 중심 재설정 요청됨 - 추적이 안정될 때까지 움직이지 마세요.</string>
<string name="spatial_tracking_lost">추적 손실 - 눈에 보이는 세부 사항이 있는 밝은 조명 영역을 향합니다.</string>
<string name="spatial_origin_changed">추적 원점 변경됨 - 추적 중심 재설정을 탭한 다음 움직이지 마세요.</string>
<string name="spatial_validation_session">이 연결에 대한 교정이 확인되었습니다.</string>
<string name="spatial_validation_saved">교정이 확인되고 저장되었습니다.</string>
<string name="spatial_wait_cameras">스테레오 카메라를 기다리는 중</string>
<string name="spatial_clock_reset">카메라 시계 재설정</string>
<string name="spatial_frame_changed">추적 좌표계가 변경되었습니다. 뷰가 재계산을 위해 저장됩니다. 추적 중심을 재설정한 다음 새 세트를 시작하여 더 많은 뷰를 캡처하세요.</string>
<string name="spatial_device_loaded">장치 교정 로드됨</string>
<string name="spatial_base_loaded">Luma Ultra 기본 보정 로드됨</string>
<string name="spatial_calibration_needed">교정이 필요함</string>
<string name="spatial_capture_recenter">추적이 변경되었습니다. 캡처하기 전에 추적 중심 재설정을 한 번 탭한 다음 움직이지 마세요.</string>
<string name="spatial_processing_failed">카메라 처리 실패</string>
<string name="spatial_hand_head_changed">손 감지 시 헤드 트래킹이 변경됨</string>
<string name="spatial_ambiguous_hands">두 카메라 모두 손은 보이나 좌우 매칭이 모호함</string>
<string name="spatial_inconsistent_depth">손이 감지되었으나 스테레오 깊이가 일치하지 않습니다.</string>
<string name="spatial_rejected_wrist">스테레오 또는 모션 검사에 의해 손목 위치가 거부됨</string>
<string name="spatial_inconsistent_palm">스테레오 포인트가 감지되었지만 손바닥 형상이 일치하지 않습니다.</string>
<string name="spatial_fit_ready">%1$.2f픽셀에 맞춥니다. 왼쪽 카메라에서 보정 대상 중심까지 선택한 거리를 측정한 다음 확인합니다.</string>
<string name="spatial_opencv_error">OpenCV를 사용할 수 없습니다: %1$s</string>
<string name="spatial_restored">%1$d 저장된 뷰가 복원되었습니다. 다시 시도하려면 보정을 계산하고, 더 많은 것을 캡처하려면 새 세트를 시작하세요.</string>
<string name="spatial_captured">캡쳐 %1$d / 조회수 24입니다. 교정 대상을 고정된 상태로 유지하십시오. 다음 보기를 위해 스마트 안경을 이동하세요.</string>
<string name="spatial_capture_corners">캡처 거부됨: %1$d / 두 카메라 모두에 12개의 필수 모서리가 표시됩니다. 보정 대상을 더 많이 표시하고 가만히 있다가 다시 시도하세요.</string>
<string name="spatial_validation_error">거리 확인을 완료할 수 없습니다: %1$s. 다시 시도해 보세요.</string>
<string name="spatial_inference_error">손 감지 불가: %1$s. CPU/GPU를 변경하거나 맨손으로 조작하는 컨트롤러를 전환하여 다시 시도하세요.</string>
<string name="spatial_hand_timeout">손 감지가 %1$dms를 초과했습니다. 관찰이 폐기됨</string>
<string name="spatial_wrists_tracked">%1$d / 스테레오로 측정한 Joy-Con 손목 위치 2개</string>
<string name="spatial_palms_tracked">추적 중인 손바닥: %1$d / 2; 집기 준비: %2$d; 잡기 준비: %3$d</string>
<string name="spatial_capture_saved">진단 캡처를 %1$s에 저장했습니다.</string>
<string name="spatial_bad_rotation">잘못된 카메라 대 머리 회전</string>
<string name="spatial_calibration_error">교정을 완료할 수 없습니다. %1$s 캡처한 보기가 저장되었습니다.</string>
<string name="spatial_reprojection_error">보류 재투영 오류 %1$.2f px가 2px를 초과합니다. 재보정하세요.</string>
<string name="spatial_distance_invalid">카메라 측정이 잘못되었습니다. 가만히 있다가 다시 시도해 보세요.</string>
<string name="spatial_distance_passed">거리 확인이 통과되었습니다.</string>
<string name="spatial_model_checksum_error">손 모델 체크섬 불일치</string>
<string name="spatial_opencv_load_error">OpenCV를 로드할 수 없습니다.</string>
<string name="glasses_6dof">6DoF 가상 화면</string>
<string name="tracking_recovery_look">조명이 밝은 방에서 천천히 주변을 둘러보세요.\n추적 카메라를 가리지 말고 가구처럼 특징이 뚜렷한 곳을 바라보세요.</string>
<string name="tracking_recovery_restart_help">아직도 막혔나요? 휴대폰에서: 스마트 안경 → 추적 → 설정 열기 → 진단 표시 → 추적 다시 시작.</string>
<string name="tracking_recovery_connect">USB 연결을 확인하고 스마트 안경을 다시 연결하세요.\n휴대전화에 USB 액세스 메시지가 나타나면 수락하세요.</string>
<string name="tracking_recovery_usb_help">일단 연결되면, 조명이 밝은 방에서 천천히 주위를 둘러보며 추적을 복원하십시오.</string>
<string name="tracking_recovery_recenter">중심 재설정 필요</string>
<string name="tracking_recovery_recenter_steps">새로운 위치에서 추적이 재개되었습니다.\n앞을 바라본 다음 휴대폰에서 추적 센터 재설정을 탭하세요.</string>
<string name="tracking_recovery_recenter_help">스마트 안경 → 추적 → 설정 열기에서 추적 중심 재설정을 찾을 수도 있습니다. 저장된 카메라 보정값이 유지됩니다.</string>
<string name="tracking_recovery_stabilizing">잠시만 가만히 있어주세요</string>
<string name="tracking_recovery_hold">추적 중심 재설정이 진행 중입니다.\n추적이 안정될 때까지 스마트 안경을 움직이지 마세요.</string>
<string name="tracking_recovery_automatic">이 화면은 머리 추적이 준비되면 자동으로 닫힙니다.</string>
<string name="glasses_steady_hand_aim">손으로 안정화된 조준</string>
<string name="glasses_steady_hand_aim_hint">어깨부터 손바닥까지 조준하세요. 손목으로 제어되는 회전을 사용하려면 끄세요.</string>
<string name="spatial_title">공간 설정</string>
<string name="spatial_wait_tracking">추적을 기다리는 중…</string>
<string name="spatial_cameras_description">왼쪽 및 오른쪽 추적 카메라</string>
<string name="spatial_camera_sync">카메라 동기화</string>
<string name="spatial_ready">준비</string>
<string name="spatial_sync_hint">카메라와 머리 추적이 정렬되기를 기다리는 중입니다. 스마트 안경을 연결된 상태로 유지하세요.</string>
<string name="spatial_prepare">1. 교정 타겟 준비</string>
<string name="spatial_print_actual">실제 크기로 인쇄</string>
<string name="spatial_print_hint">각 정사각형의 크기는 30mm(1.181인치)여야 합니다. 조명이 밝은 곳의 단단한 표면에 시트를 평평하게 장착합니다.</string>
<string name="spatial_print">보정 패턴 인쇄</string>
<string name="spatial_capture_group">2. 다양한 뷰 캡처</string>
<string name="spatial_board_stationary">교정 타겟을 고정된 상태로 유지하세요.</string>
<string name="spatial_capture_hint">스마트 안경을 더 가까이, 더 멀리, 옆으로 움직여 보세요. 왼쪽/오른쪽으로 돌리고, 위쪽/아래쪽 각도를 맞추고, 옆쪽으로 기울입니다. 두 카메라 모두에서 보정 대상을 유지하고 각 캡처 전에 잠시 일시 중지합니다.</string>
<string name="spatial_start">새로운 교정 시작</string>
<string name="spatial_wait_sync">카메라 동기화를 기다리는 중입니다.</string>
<string name="spatial_start_hint">뷰를 수집하기 위해 새로운 교정을 시작합니다.</string>
<string name="spatial_views_hint">두 미리보기 모두에서 교정 타겟이 표시되도록 유지합니다. 다양한 각도에서 최소 24개의 선명한 뷰를 캡처하세요.</string>
<string name="spatial_capture">캡쳐 캘리브레이션 타겟 화면</string>
<string name="spatial_alignment">카메라 정렬 계산</string>
<string name="spatial_calculating">계산 중…</string>
<string name="spatial_calculate">교정 계산</string>
<string name="spatial_distance_group">3. 거리 확인</string>
<string name="spatial_distance">측정된 거리</string>
<string name="spatial_distance_hint">인쇄된 마커를 더 쉽게 감지할 수 있도록 12인치 또는 30cm로 시작하세요. 사용할 정확한 측정값을 선택하세요.</string>
<string name="spatial_show_diagnostics">진단 표시</string>
<string name="spatial_diagnostics_hint">카메라 타이밍 및 추적 복구 도구.</string>
<string name="spatial_hand_input">손 추적을 통한 입력</string>
<string name="spatial_wait_timing">카메라 타이밍을 기다리는 중입니다.</string>
<string name="spatial_gpu">손의 GPU 감지</string>
<string name="spatial_gpu_hint">CPU가 기본값이다. GPU는 실험적이므로 SteamVR이 다시 시작될 수 있습니다. 이 선택은 추적이 다시 시작되면 재설정됩니다.</string>
<string name="spatial_half_rate">손 추적을 위한 입력 빈도 제한</string>
<string name="spatial_half_rate_hint">카메라 이미지의 절반을 사용합니다. 최대 주파수를 비교하려면 끄십시오. 추적이 다시 시작되면 재설정됩니다.</string>
<string name="spatial_diagnostic_capture">진단 캡처</string>
<string name="spatial_diagnostic_capture_hint">하나의 스테레오 이미지 쌍을 로컬에 저장합니다. 이미지는 요청한 경우에만 저장됩니다.</string>
<string name="spatial_capture_paused">캡처가 일시 중지되었습니다: %1$s</string>
<string name="spatial_measure_hint">%1$s을 측정한다. 두 미리보기 모두에 전체 보정 대상을 표시한 다음 가만히 기다리세요.</string>
<string name="spatial_print_scale" formatted="false">100% / 실제 크기로 인쇄합니다. 각 정사각형: 30mm(1.181인치).</string>
<string name="spatial_print_stationary">교정 대상을 평평하고 고정된 상태로 유지하십시오. 캡처 사이에 스마트 안경을 이동합니다.</string>
<string name="spatial_active">6DoF 활성</string>
<string name="spatial_connect_hint">Luma Ultra를 연결하고 위치 추적을 활성화합니다.</string>
<string name="spatial_wait_hands">손 추적을 기다리는 중</string>
<string name="spatial_collect_instructions">5 × 7 교정 대상을 고정된 상태로 유지하십시오. 스마트 안경을 이동하고 회전하면서 24개 이상의 뷰를 캡처하세요.</string>
<string name="spatial_capture_pending">다음 카메라 영상을 기다리는 중입니다. 스마트 안경을 가만히 잡으세요.</string>
<string name="spatial_validation_pending">다음 카메라 영상을 확인하는 중입니다. 전체 교정 대상이 보이도록 유지하고 가만히 기다리십시오.</string>
<string name="spatial_start_first">먼저 캘리브레이션을 시작하세요</string>
<string name="spatial_no_camera_frame">새로운 카메라 이미지가 도착하지 않았습니다. 스마트 안경 연결 및 카메라 미리보기를 확인한 후 다시 시도하세요.</string>
<string name="spatial_tap_start">먼저 새 보정 시작을 탭합니다.</string>
<string name="spatial_capture_recenter_pending">추적 중심 재설정이 안정적인 추적을 기다리고 있습니다. 잠시 움직이지 마세요.</string>
<string name="spatial_capture_unsynchronized">캡처 거부됨: 머리 추적이 동기화되지 않았거나 캡처 중에 변경되었습니다. 움직이지 말고 다시 시도하세요.</string>
<string name="spatial_align_first">거리를 확인하기 전에 카메라 정렬을 계산하십시오.</string>
<string name="spatial_hand_wait_sync">카메라와 헤드의 동기화를 기다리는 중</string>
<string name="spatial_no_wrists">손목이 감지되지 않았습니다. Joy-Con 컨트롤러 핸들을 스마트 안경 앞에 두십시오.</string>
<string name="spatial_no_hands">손이 감지되지 않습니다. 스마트 안경 앞에 손바닥을 펼쳐 보여주세요.</string>
<string name="spatial_one_camera_wrists">하나의 카메라에서만 손목이 보입니다. 컨트롤러 핸들을 공유 보기에 유지하세요</string>
<string name="spatial_one_camera_hands">하나의 카메라에서만 손이 보입니다. 두 손바닥을 공유 보기에 유지</string>
<string name="spatial_hands_need_calibration">손이 활성화되도록 보정 및 거리 확인을 완료합니다.</string>
<string name="spatial_hands_wait_stable">안정적인 헤드 추적을 기다리는 중; 요청 시 추적 중심을 재설정하세요.</string>
<string name="spatial_old_frame">카메라 관찰이 너무 오래되었습니다. 새로운 한 쌍을 기다리고 있어요</string>
<string name="spatial_hand_error">손 추적이 중지됨: %1$s</string>
<string name="spatial_stereo_loaded">스테레오 %1$d×%2$d; %3$s</string>
<string name="spatial_alignment_error">머리 추적과 보정 대상이 %1$s(5cm/2인치 제한)만큼 일치하지 않습니다. 교정 대상을 고정된 상태로 유지하고 새 세트를 시작하기 전에 안정적인 추적을 기다립니다. 스마트 안경을 부드럽게 돌리고 기울이세요. 각 캡처 전에 일시 중지합니다.</string>
<string name="spatial_need_views">고정된 교정 대상에 대해 최소 24개의 다양한 뷰를 캡처합니다.</string>
<string name="spatial_need_rotation">스마트 안경을 좌우로 돌리고, 상하로 기울이는 단계; 회전 없는 움직임은 카메라 정렬을 교정할 수 없습니다.</string>
<string name="spatial_bad_baseline">믿기지 않는 카메라 기준선</string>
<string name="spatial_need_orientations">좀 더 다양한 방향으로 머리를 움직여 보세요.</string>
<string name="spatial_bad_alignment">카메라와 머리의 정렬이 일관되지 않습니다.</string>
<string name="spatial_distance_corners">%1$d / 두 카메라 모두에서 24개의 체커보드 모서리가 감지되었습니다. 전체 교정 대상이 보이도록 유지하고 가만히 기다리십시오. 이미 보이는 경우 12인치 또는 30cm를 선택하고 다시 시도하기 전에 더 가까운 거리를 측정합니다.</string>
<string name="spatial_distance_depth">교정대상은 보이지만 깊이를 확실하게 측정할 수 없었다. 스마트 안경을 가만히 잡고 보정 대상을 평평하게 유지하고 조명을 밝게 유지한 후 다시 시도하세요.</string>
<string name="spatial_distance_retry">왼쪽 카메라에서 캘리브레이션 대상 중심까지의 거리를 다시 확인하고 재시도하세요.</string>
<string name="spatial_distance_result">카메라 측정 %1$s; 선택한 거리 %2$s. %3$s</string>
<string name="spatial_wait_previews">보정을 시작하기 전에 두 카메라 미리보기를 모두 기다리세요.</string>
<string name="spatial_saved_views_hint">저장된 뷰는 다시 계산될 수 있습니다. 현재 추적 좌표계에서 캡처하려면 새 보정을 시작하세요.</string>
</resources>