mirror of
https://github.com/Droid-Deck/DroidDeck.git
synced 2026-11-21 05:46:03 +00:00
Add app-wide 3DoF for VITURE, RayNeo and XREAL glasses and 6DoF for Luma Ultra (#1035)
* Add VITURE glasses support: hardware control, 3D, head tracking Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page. * Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs * Hang the glasses Settings lip over the top of the button * Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses * Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top * Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad * Let the pad hands reach a metre out so buttons with deep colliders press * Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters * Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad * Glasses: SteamVR field of view defaults to 90° * VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand * Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's * Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam * Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end * Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs * Harden VITURE stereo negotiation and output refresh tracking * Localize stereo recovery feedback and record Astra reconnect tests * Improve test failure diagnostics and refresh Astra firmware findings * Handle VITURE docks separately and reject truncated USB frames * Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes - A 3D attempt that ends at the 640x480 fallback is remembered for that glasses model, so Play SteamVR no longer blacks out the glasses after every restart; Retry clears it and "3D for VR games" stays reachable - A VITURE Mobile Dock on its own no longer counts as glasses; through a dock Play SteamVR is hidden and the sheet shows the output and why there is no control - HDR is probed on the glasses when the session starts there - Glasses frames with a mismatched checksum are marked in the status frame log - SteamVR layer and driver vblank counters stay monotonic across refresh changes; one-eye render scale applies from activation and on mono/3D switches - Compositor binds announce the refresh clients were last told; the presenter retries a failed first swapchain - Dead strings and helpers removed; docs updated * Glasses: drop USB frames with a bad checksum * Glasses: count frames dropped for a bad checksum * Feat/viture xr (#907) * Add RayNeo Air and GT support to the XR glasses pipeline * Add RayNeo Air and GT support to the XR glasses pipeline * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Checkpoint glasses tracking, calibration, and SteamVR launch integration * Add XREAL 1S support and correct GT and Pro 2 tracking * Add XREAL 1S support and correct GT and Pro 2 tracking * Fix mirrored glasses tracking and recover SteamVR after device loss * Fix mirrored glasses tracking and recover SteamVR after device loss * Document confirmed XREAL 1S brightness control * Document confirmed XREAL 1S brightness control * Fix SteamVR glasses defaults and rendering controls * Fix SteamVR glasses defaults and rendering controls * chore: keep only the 3 newest session log folders (#852) * chore: add agent comment rules (#748) Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * Fix SteamVR polling, VITURE checksums, and fence tracking Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter. Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage. * fix: wireless ADB page names the child-process switch the way Android shows it (#848) * l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850) * l10n: refresh stale and untranslated strings in es, fr, ko, ru - mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales). - wincomp_needs_installer / wincomp_installers_note: es and ko still described the old "coming soon" behaviour; align with the current English text. - summary_remove_game: was still English in all four locales. Machine-assisted translation; native-speaker review is welcome. * l10n(es): say registro, not grabación, for the missing installer record --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * fix: a failed cloud save recovery no longer ends the app (#846) The cloud-recovery thread started at every app start had nothing to catch an error, so one went to CrashHandler, which halts the process with status 2. In unit tests the thread can outlive the test that started it, fail on the torn-down preferences, and take the whole test run down. The error is now logged and the thread ends. Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> * fix: an interrupted Linux runtime download resumes instead of starting again (#847) * fix: an interrupted Linux runtime download resumes instead of starting again installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file. * test: Downloader resumes a cut-off download from the bytes it kept Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes. * fix: a resumed download discards a 206 that does not start where the kept bytes end Downloader appended every 206 response to the partial file without looking at Content-Range. A server or proxy that answers a Range request with a different offset would leave a corrupt file. Check that the range starts at the kept length; otherwise delete the partial file and start again without a Range header. Adds a test with a server that answers the Range request from offset 0. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849) * l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome. * l10n: correct missing active swap translations --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: droiddeckctl reaches variant-package builds (recover #842) (#854) fix: droiddeckctl reaches builds shipped under a variant package The provider authority and the start Activity's component were fixed to com.droiddeck.launcher, so droiddeckctl could not talk to the antutu, ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE now picks the package; the Activity's class name stays the same in every variant. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * feat: droiddeckctl reports on-screen pacing (recover #843) (#855) feat: droiddeckctl pacing reports the frames that reached the screen Reads SurfaceFlinger's timestats for the game's layer (or the session's SurfaceView) over a capture: frames on screen, fps on screen, the present-to-present histogram and how many intervals were off the usual cadence. Records split by a refresh-rate change are summed. A game's own fps counter counts frames handed over, so it can't show dropped or doubled frames. Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> * fix: Steam can restart more than twice in a session (#754) * fix: Steam can restart more than twice in a session Every exit 42 counted toward the cap that stops an update which will not install, and the count was never cleared, so the third restart of a session ended it however far apart they were. A client that ran for a minute before asking is not that loop: the count starts again. * fix: measure the client's run time as it exits The time spent collecting logs and checking FEX after the client exits counted toward its run, so a slow cleanup could make a quick exit 42 look like a long one and clear the count. --------- Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> * fix: the front end keeps its page when the Fold is folded or unfolded (#832) * fix: the front end keeps its page when the Fold is folded or unfolded MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose. * fix: store login keeps rebuilding its toolbar when the display density changes StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place. --------- Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> * Release pointer buttons without replaying stale motion (#803) * Fix cursor warping on native touch down * Preserve input cleanup without replaying stale pointer motion --------- Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> * l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539) * l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja) The stores, cloud saves, Windows components, Steam touch, desktop removal and background-downloads strings landed after #284's translation snapshot, so every one of them fell back to English. Translate all 184 into Simplified Chinese, Traditional Chinese (Taiwan and Hong Kong) and Japanese, keeping each locale file's own vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定). Also fix four Hong Kong strings that kept the simplified 着色器. * l10n(zh): fix stale and ambiguous strings found in review Severe: summary_remove_game was untranslated English in all three files; mode_added_art_hint, wincomp_installers_note and wincomp_needs_installer still described the pre-#480/#492 English. Also: distinguish the Setup wizard from Android system settings in zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as 收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the re-applied-at-launch, action-failed and already-in-Games strings, and play as 執行/開啟遊戲 in zh-TW/zh-HK. * l10n(ja): fix stale and ambiguous strings found in review --------- Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * Rebuild and verify Windows VR runtime components * Rebuild and verify Windows VR runtime components * Add top, bottom, and centered picture positions for Steam sessions (#871) * fix: dependency scan ignores folders above the game folder (#859) * DroidDeck-Proton: get releases from the Droid-Deck org repo DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton (11-9.1 is Latest there), so the Components page, the update check and the guest installer read releases from the org repo instead of The412Banner's. * feat: low-latency controller and touch toggles in the session drawer (#808) * fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876) * feat: Steam home wall fills from the signed-in library instead of store picks (#878) * test: cover GPU family and support classification (#880) * Fix local builds on Linux failing after the first Comet build (#866) * feat: sort the store library and installed tabs, and switch between card and list views (#798) * feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782) * fix: keep Quest-patched Turnip as the auto default (#853) * Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864) * fix: keep proot sessions alive when the kernel loses fork events (#457) * fix(quest): correct desktop and Steam display corruption across sessions (#733) fix(quest): stabilize desktop and Steam layer presentation Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted. Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result. Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> * fix: keep SteamVR syscall hooks and report Steam crashes (#905) * fix: preserve SteamVR syscall hooks * fix: report Steam crashes through gamescope * fix: honor glasses pacing and resolution in SteamVR launches --------- Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com> * Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture * Translate the glasses calibration, XREAL and SteamVR recovery strings * SteamVR recovery: give a finished teardown time to collect logs before restarting * Credit the projects the XR glasses support builds on * Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise * Add experimental Luma tracking and stabilize SteamVR launches Add native Luma Ultra spatial tracking, optical controllers, and stereo calibration with DroidDeck styling, imperial/metric measurements, and pending recenter recovery. Include the pinned hand model and calibration board. Keep live guest and SDK files outside Android's evictable cache. Filter the Adreno 840 sysmem override in the shared SteamVR helper, serialize timeline mirroring, retain invalid optical controllers without event floods, and prevent an unprivileged scheduling fallback from lowering compositor RTTIME. Validation: latest APK build and runtime freshness checks pass; 247 affected glasses/calibration tests pass. Native VR, helper, and packaging regressions pass. Two earlier phone library launches sustained 60 fps for 308 and 188 seconds without recovery or restart. The newer calibration APK is installed and checksum-verified; calibrated-hand and sustained gameplay acceptance remain pending. One existing Android test requires Windows symlink privileges. * Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected * Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves - Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates) - MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con - No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field - SteamVR safe mode cleared before each start so one crash no longer blocks the driver * Improve Luma Ultra tracking and isolate device-specific controls Refine stereo hand and Joy-Con tracking, gesture release, calibration, recovery UI, diagnostics, display modes, and compositor handling. Keep Ultra controls and input routing behind a live SDK-confirmed Carina connection; clear retained spatial mode when other glasses connect. Add optional UVC transport with pinned dependencies and packaged notices. Validation: 456 Android tests, ARM64 VR build and native regressions, 47 tooling tests, SDK/UVC-enabled and disabled builds, and 150 packaged runtime checksums. Two shader compilation tests skipped because the compiler is unavailable. Hardware interaction gates remain experimental. * Delay Luma Ultra 6DoF until SteamVR settles Suspend spatial SDK startup while SteamVR launches, then restore it two seconds after RUNNING is confirmed. Preserve saved tracking preferences and automatically recenter same-device restoration, including cancellation and early stop. Discard superseded launch requests and status replies after session teardown. Validation: 128 focused JVM tests passed on the isolated commit snapshot; 129 passed with the current local hand-tracking work. Debug build and runtime checks passed, and the reviewed APK was installed and hash-verified on the phone. * Clarify glasses and phone camera tracking options Separate Luma Ultra camera controls from phone-camera tracking so the two hand-tracking switches have clear sources. Label bare-hand controllers and Joy-Con position tracking explicitly, explain physical Joy-Con inputs and camera priority, and update the camera prompt and calibration guidance. Use fresh phone section and toggle labels so existing translations do not hide the distinction. Preserve tracking behavior and saved preferences. Validation: 39 existing UI tests, debug build, and packaged runtime verification passed. Reviewed changes and installed the APK on the connected phone. * Fix tracking handoff and shared runtime regressions Release spatial ownership and controller overrides when output returns to the phone. Preserve USB-loss recovery, keep Vulkan submissions asynchronous, clean persistent guest scratch on runtime removal, and clarify the 6DoF head-tracking control. * Apply smart-glasses virtual screens across DroidDeck menus * Finalize Luma hand baseline and document smart-glasses support Keep raw grayscale-to-RGB Full hand inference, wrist-only Joy-Con reconstruction, bounded visual holds, and the dead-zone rollback. Retain opt-in steady aim, recenter controls, reproducible Lite models, and the JPEG-padding fix. Remove unsuccessful benchmark-only and USB transport experiments. Document the cross-brand 3DoF matrix, Luma Ultra 6DoF, SDK requirements, and app-wide screen behavior. * Fix executable permission for SteamVR launcher * Address hand tracking and VR review findings * Bound stereo recovery test image comparison memory * Localize smart-glasses setup and tracking diagnostics Move calibration controls, status messages, validation errors, distance labels, and printed-board instructions into Android string resources. Add and update machine-assisted translations in all 32 supported non-English locale catalogs, with corrections for recentering, hand tracking, product names, and measurements. Keep print instructions within the page using text layout that supports wrapping and right-to-left text. Correct the Lite model toggle description to reflect its Lite palm detector and Lite landmark model. Add locale coverage, format-argument, line-break, and measurement checks, plus French and Arabic calibration UI tests. Preserve tracking calculations and the shared runtime storage behavior. Validation: Android resource and Kotlin compilation; 3 localization checks; 68 focused tests; 1,597 JVM tests at a 512 MB heap; French and Arabic UI renders. * Correct smart-glasses translations from PR review Fix the 42 localization findings covering hand and head terminology, disabled states, calibration dimensions, camera visibility, capture rejection, and menu references. Correct the repeated capture-error ambiguity in related locales and clarify its English source. Keep Romanian setup instructions consistent with the existing informal voice. Extend localization measurement validation to distance hints and retry guidance. Verify the recovery screen's palette-dependent text color with one row-sized pixel buffer and guaranteed bitmap cleanup. Validation: Android resource and Kotlin compilation; 3 localization checks across all supported locales; 68 focused JVM tests at a 512 MB heap. * Work around SteamVR device loss with Adreno 840 Turnip v0.2.0 * Withdraw ineffective SteamVR flushall workaround --------- Co-authored-by: maxjivi05 <maxjividen@gmail.com> Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com> Co-authored-by: connor g <connorsspam1992@gmail.com> Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com> Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com> Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com> Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com> Co-authored-by: Kirk <kirtoy.junsay@gmail.com> Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com> Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com> Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com> Co-authored-by: asdf17128 <asdf17128@gmail.com> Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com> Co-authored-by: Dantalian <wsu091227@qq.com> Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com> Co-authored-by: The412Banner <the412banner@users.noreply.github.com> Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com> Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com> Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com> Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com> Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com> Co-authored-by: Jagger15 <jagger2333@live.com>
This commit is contained in:
+13








authored and
GitHub committed 2026-10-18 08:37:09 -04:00
1 parent
292295ba30
commit
e7bc4b03a5
213 files changed
+22572
-919
No files matched your search
@@ -2341,14 +2341,14 @@
|
||||
<string name="glasses_display">Hiển thị</string>
|
||||
<string name="glasses_refresh">Tốc độ làm mới</string>
|
||||
<string name="glasses_3d">3D (cạnh nhau)</string>
|
||||
<string name="glasses_3d_hint">Mỗi mắt nhận một nửa riêng của hình 3840×1080. Nếu mất hình, hãy giữ nút 2D/3D của kính.</string>
|
||||
<string name="glasses_3d_hint">Chuyển kính thông minh sang chế độ 3D song song. Chức năng theo dõi đầu được điều khiển riêng.</string>
|
||||
<string name="glasses_3d_failed">Chưa xác nhận được tín hiệu 3D. Hãy thử lại khi hình ảnh 2D trở lại.</string>
|
||||
<string name="glasses_no_signal">Không có hình: kính đang ở chế độ mà điện thoại này không thể xuất. Hãy giữ nút 2D/3D của kính, hoặc rút ra rồi cắm lại.</string>
|
||||
<string name="glasses_3d_refresh">Tốc độ làm mới 3D</string>
|
||||
<string name="glasses_auto3d">3D cho game VR</string>
|
||||
<string name="glasses_auto3d_hint">Chuyển sang 3D khi SteamVR chạy, rồi chuyển lại sau đó.</string>
|
||||
<string name="glasses_picture">Hình ảnh 3D</string>
|
||||
<string name="glasses_picture_hint">Tự động: SteamVR lấp đầy tầm nhìn; các game khác hiện như một màn hình lơ lửng ở 3D và giữ phẳng ở 2D.</string>
|
||||
<string name="glasses_picture">Hình ảnh</string>
|
||||
<string name="glasses_picture_hint">Tự động hiển thị nội dung phẳng ở cả hai mắt và phát hiện SteamVR. Chọn trò chơi Song song cho nội dung SBS.</string>
|
||||
<string name="glasses_picture_auto">Tự động</string>
|
||||
<string name="glasses_picture_screen">Màn hình ảo</string>
|
||||
<string name="glasses_picture_sbs">Game 3D cạnh nhau</string>
|
||||
@@ -2358,20 +2358,20 @@
|
||||
<string name="glasses_screen_no_output">Các thiết lập này áp dụng khi “Game trên kính” đang bật và game đang hiển thị trên kính.</string>
|
||||
<string name="glasses_screen_flat_hint">Tự động giữ game 2D này ở chế độ toàn màn hình. Dùng màn hình ảo để chỉnh chiều rộng, khoảng cách và theo dõi đầu.</string>
|
||||
<string name="glasses_screen_use">Dùng màn hình ảo</string>
|
||||
<string name="glasses_screen_direct_hint">SteamVR lấp đầy tầm nhìn. Chỉnh trường nhìn ở bên dưới; chiều rộng và khoảng cách chỉ áp dụng cho màn hình ảo.</string>
|
||||
<string name="glasses_screen_direct_hint">SteamVR lấp đầy tầm nhìn. Điều chỉnh trường nhìn của nó trong VR; chiều rộng và khoảng cách chỉ áp dụng cho màn hình ảo.</string>
|
||||
<string name="glasses_screen_sbs_hint">Game 3D cạnh nhau lấp đầy từng mắt. Chiều rộng và khoảng cách chỉ áp dụng cho màn hình ảo.</string>
|
||||
<string name="glasses_tracking_flat_hint">Tự động giữ game 2D này cố định trong tầm nhìn. Chọn “Màn hình ảo” trong “Hiển thị” để dùng theo dõi đầu.</string>
|
||||
<string name="glasses_tracking_sbs_hint">Theo dõi đầu áp dụng cho màn hình ảo hoặc game SteamVR đang chạy.</string>
|
||||
<string name="glasses_hardware">Kính</string>
|
||||
<string name="glasses_hardware">Thiết bị</string>
|
||||
<string name="glasses_brightness">Độ sáng</string>
|
||||
<string name="glasses_volume">Âm lượng</string>
|
||||
<string name="glasses_sunblock">Chống nắng</string>
|
||||
<string name="glasses_sunblock_hint">Làm tối tròng kính phía trước.</string>
|
||||
<string name="glasses_tracking">Theo dõi đầu</string>
|
||||
<string name="glasses_tracking">Theo dõi</string>
|
||||
<string name="glasses_head_tracking">Theo dõi đầu</string>
|
||||
<string name="glasses_head_tracking_hint">Cảm biến riêng của kính xoay màn hình ảo và SteamVR theo đầu bạn.</string>
|
||||
<string name="glasses_recenter">Căn giữa lại góc nhìn</string>
|
||||
<string name="glasses_recenter_button">Căn giữa lại</string>
|
||||
<string name="glasses_recenter_button">Căn giữa lại màn hình</string>
|
||||
<string name="glasses_vr_fov">Trường nhìn của SteamVR</string>
|
||||
<string name="glasses_vr_fov_hint">Thấp hơn sẽ đưa SteamVR lại gần và lấp đầy kính; cao hơn cho thấy nhiều hơn xung quanh bạn.</string>
|
||||
<string name="glasses_playing">Đang chơi trên %1$s</string>
|
||||
@@ -2392,8 +2392,8 @@
|
||||
<string name="glasses_calibration_reset_hint">Xóa hiệu chỉnh đã lưu và khôi phục mặc định của mẫu kính? Hãy căn giữa lại sau khi đeo kính vào.</string>
|
||||
<string name="glasses_calibration_reset_button">Đặt lại</string>
|
||||
<string name="hand_camera_group">Theo dõi tay</string>
|
||||
<string name="hand_camera_prompt_title">Theo dõi tay của bạn bằng camera?</string>
|
||||
<string name="hand_camera_prompt_body">Camera có thể thấy tay bạn. Khi không kết nối tay cầm nào, đôi tay trần của bạn sẽ trở thành tay trong VR: chụm ngón cái và ngón trỏ để nhấp, nắm tay lại để cầm, và xoay lòng bàn tay về phía bạn rồi chụm ngón tay để mở menu. Khi dùng Joy-Con, camera đặt chúng đúng nơi tay bạn thực sự ở. Hình ảnh được xử lý ngay trên thiết bị này và không bao giờ được lưu hay gửi đi.</string>
|
||||
<string name="hand_camera_prompt_title">Theo dõi tay hoặc bộ điều khiển Joy-Con bằng camera điện thoại?</string>
|
||||
<string name="hand_camera_prompt_body">Khi không có bộ điều khiển nào được kết nối, camera điện thoại sẽ theo dõi bàn tay trần của bạn trong VR: chụm ngón cái và ngón trỏ để nhấp, khép bàn tay để cầm, và xoay lòng bàn tay về phía bạn và chụm để mở menu. Với bộ điều khiển Joy-Con được ghép nối, camera sẽ theo dõi vị trí của chúng trong khi bộ điều khiển Joy-Con cung cấp khả năng xoay và nhập nút. Hình ảnh được xử lý trên thiết bị này và không bao giờ được lưu hoặc gửi đi.</string>
|
||||
<string name="hand_camera_rear">Camera sau</string>
|
||||
<string name="hand_camera_rear_hint">Nên dùng. Thường sắc nét và có góc nhìn rộng hơn.</string>
|
||||
<string name="hand_camera_front">Camera trước</string>
|
||||
@@ -2401,7 +2401,7 @@
|
||||
<string name="hand_camera_allow">Dùng camera</string>
|
||||
<string name="hand_camera_not_now">Không phải bây giờ</string>
|
||||
<string name="hand_camera_setting">Theo dõi tay bằng camera</string>
|
||||
<string name="hand_camera_setting_hint">Khi không kết nối tay cầm nào, tay bạn sẽ trở thành tay trong VR: chụm ngón tay để nhấp, lòng bàn tay hướng về bạn và chụm ngón để mở menu. Khi dùng Joy-Con, chúng được đặt đúng vị trí camera nhìn thấy. Hình ảnh luôn ở lại trên thiết bị này.</string>
|
||||
<string name="hand_camera_setting_hint">Sử dụng camera điện thoại để thực hiện các cử chỉ bằng tay không hoặc để định vị bộ điều khiển Joy-Con đã ghép nối trong VR. Bộ điều khiển Joy-Con cung cấp khả năng xoay và nhập nút. Tạm dừng trong khi kính thông minh theo dõi tay hoặc bộ điều khiển Joy-Con của bạn. Hình ảnh chỉ được xử lý trên thiết bị này.</string>
|
||||
<string name="hand_camera_choice">Camera</string>
|
||||
<string name="hand_camera_access">Quyền camera</string>
|
||||
<string name="hand_camera_access_hint">Hãy cho phép quyền camera để bắt đầu theo dõi tay.</string>
|
||||
@@ -2655,4 +2655,208 @@
|
||||
<string name="boot_movie_converting_started">Đang chuyển đổi %1$s cho Steam. Hãy để DroidDeck mở.</string>
|
||||
<string name="boot_movie_unsupported">Thiết bị này không giải mã được video đó.</string>
|
||||
<string name="boot_movie_import_failed">Không thể nhập video này</string>
|
||||
<string name="glasses_experimental">Camera Luma Ultra — Thử nghiệm</string>
|
||||
<string name="glasses_joycons">Theo dõi vị trí Joy-Con</string>
|
||||
<string name="glasses_joycons_hint">Sử dụng camera của kính thông minh để định vị bộ điều khiển Joy-Con đã ghép nối. Xoay và nhập nút đến từ bộ điều khiển Joy-Con. Vị trí được ước tính khi cổ tay của bạn bị che khuất. Thay thế bộ điều khiển được điều khiển bằng tay không và tạm dừng theo dõi bằng camera điện thoại. Hướng bộ điều khiển Joy-Con về phía trước khi kết nối hoặc đặt lại trung tâm theo dõi.</string>
|
||||
<string name="glasses_joycons_requires_position">Trước tiên hãy bật tính năng theo dõi vị trí. Yêu cầu bộ điều khiển Joy-Con có khả năng chuyển động trên Android 12 trở lên. Mặc định là tắt.</string>
|
||||
<string name="setup_tab_glasses">Kính thông minh</string>
|
||||
<string name="setup_glasses_scope">Cài đặt hiển thị và theo dõi đầu được chia sẻ trên các menu, trò chơi và phiên máy tính để bàn của DroidDeck.</string>
|
||||
<string name="setup_glasses_connect">Kết nối kính thông minh để thay đổi cài đặt hiển thị và theo dõi của chúng. Các cài đặt đã lưu của bạn sẽ được giữ lại khi bạn ngắt kết nối.</string>
|
||||
<string name="glasses_vr">Thực tế ảo (VR)</string>
|
||||
<string name="glasses_display_mode">Chế độ hiển thị</string>
|
||||
<string name="glasses_output_2d">Đầu ra 2D</string>
|
||||
<string name="glasses_output_3d">Đầu ra 3D</string>
|
||||
<string name="glasses_picture_group">Hình ảnh và màn hình ảo</string>
|
||||
<string name="glasses_position_group">Vị trí và độ cao sàn</string>
|
||||
<string name="glasses_hands_group">Theo dõi tay — Thử nghiệm</string>
|
||||
<string name="glasses_tracking_status">Trạng thái theo dõi</string>
|
||||
<string name="glasses_resolution_2d">Độ phân giải 2D</string>
|
||||
<string name="glasses_resolution_3d">Độ phân giải 3D</string>
|
||||
<string name="glasses_resolution_vr">Độ phân giải VR</string>
|
||||
<string name="glasses_resolution_auto">Tự động</string>
|
||||
<string name="glasses_resolution_inherit">Giống như 2D / 3D</string>
|
||||
<string name="glasses_resolution_hint">Độ phân giải đầu ra cho mỗi mắt.</string>
|
||||
<string name="glasses_refresh_30_hint">Bật Chơi game trên kính thông minh để chọn chế độ 30 Hz gốc của màn hình.</string>
|
||||
<string name="glasses_3dof">Màn hình ảo 3DoF</string>
|
||||
<string name="glasses_3dof_hint">Neo các trò chơi phẳng trước mặt bạn để bạn có thể nhìn xung quanh. Cho phép Chơi game trên kính thông minh mà không cần chuyển sang 3D.</string>
|
||||
<string name="glasses_screen_app_wide">Chiều rộng và khoảng cách cập nhật màn hình ảo được theo dõi cho menu, trò chơi và phiên máy tính để bàn của DroidDeck ngay lập tức.</string>
|
||||
<string name="glasses_head_tracking_spatial_vr_hint">Theo dõi vị trí bao gồm xoay đầu trong SteamVR. Để chỉ theo dõi xoay, hãy tắt theo dõi vị trí.</string>
|
||||
<string name="glasses_head_tracking_spatial_hint">Điều khiển chuyển động đầu trên màn hình ảo. Theo dõi vị trí bao gồm xoay đầu trong SteamVR.</string>
|
||||
<string name="glasses_quick_actions">Thao tác nhanh</string>
|
||||
<string name="glasses_recenter_screen_hint">Nhìn vào vị trí bạn muốn màn hình, sau đó đặt lại trung tâm theo dõi để thiết lập chiều cao và hướng của nó.</string>
|
||||
<string name="glasses_recenter_joycons_button">Căn giữa lại Joy-Con</string>
|
||||
<string name="phone_camera_tracking_group">Camera điện thoại — Thử nghiệm</string>
|
||||
<string name="phone_camera_tracking_setting">Theo dõi tay hoặc bộ điều khiển Joy-Con</string>
|
||||
<string name="glasses_6dof">Màn hình ảo 6DoF</string>
|
||||
<string name="glasses_position">Theo dõi vị trí — thử nghiệm</string>
|
||||
<string name="glasses_position_hint">Chuyển động vật lý trong VR và xung quanh màn hình ảo. Khởi động lại theo dõi mất một chút thời gian.</string>
|
||||
<string name="glasses_eye_height">Chiều cao mắt hiện tại so với sàn nhà</string>
|
||||
<string name="glasses_floor">Đặt mức sàn từ chiều cao hiện tại</string>
|
||||
<string name="glasses_floor_set">Đặt mức sàn</string>
|
||||
<string name="glasses_spatial_setup">Thiết lập và chẩn đoán camera stereo</string>
|
||||
<string name="glasses_spatial_setup_hint">Kiểm tra hiệu chuẩn camera và theo dõi tay trước khi chơi.</string>
|
||||
<string name="glasses_spatial_open">Mở thiết lập</string>
|
||||
<string name="glasses_hands">Bộ điều khiển được vận hành bằng tay trần</string>
|
||||
<string name="glasses_hands_hint">Sử dụng camera kính thông minh để nhắm mục tiêu bằng tay, chụm để nhấp và khép tay để nắm trong VR. Cần điều khiển của gamepad di chuyển và xoay. Thay thế tính năng theo dõi vị trí của Joy-Con. Có thể bị lag hoặc mất theo dõi trong khi chơi game.</string>
|
||||
<string name="glasses_hands_ready_hint">Cho phép bộ điều khiển được vận hành bằng tay trần dưới camera Luma Ultra trong phần Theo dõi. Hiển thị bàn tay mở trước.</string>
|
||||
<string name="glasses_hands_base">Hiệu chuẩn Luma Ultra dùng chung</string>
|
||||
<string name="glasses_hands_base_hint">Sử dụng cơ sở Luma Ultra dùng chung. Hiệu chuẩn kính thông minh của riêng bạn để xác minh độ chính xác của chúng.</string>
|
||||
<string name="glasses_hands_calibration_verified">Đã xác minh hiệu chuẩn đo được</string>
|
||||
<string name="glasses_hands_calibration_required">Cần xác thực</string>
|
||||
<string name="glasses_hands_calibration_required_hint">Bộ điều khiển được vận hành bằng tay trần sẽ khả dụng sau khi kiểm tra khoảng cách đo được hoàn tất.</string>
|
||||
<string name="tracking_recovery_lost">Mất theo dõi</string>
|
||||
<string name="tracking_recovery_restart_help">Vẫn còn mắc kẹt? Trên điện thoại của bạn: kính thông minh → Theo dõi → Mở thiết lập → Hiển thị chẩn đoán → Khởi động lại theo dõi.</string>
|
||||
<string name="tracking_recovery_disconnected">Kính thông minh bị ngắt kết nối</string>
|
||||
<string name="tracking_recovery_connect">Kiểm tra kết nối USB và kết nối lại kính thông minh.\nChấp nhận lời nhắc truy cập USB trên điện thoại của bạn nếu nó xuất hiện.</string>
|
||||
<string name="tracking_recovery_usb_help">Sau khi kết nối, hãy từ từ nhìn xung quanh trong phòng có đủ ánh sáng để khôi phục tính năng theo dõi.</string>
|
||||
<string name="tracking_recovery_recenter">Cần căn giữa lại</string>
|
||||
<string name="tracking_recovery_recenter_steps">Quá trình theo dõi đã trở lại ở vị trí mới.\nNhìn về phía trước, sau đó chạm vào đặt lại trung tâm theo dõi trên điện thoại của bạn.</string>
|
||||
<string name="tracking_recovery_recenter_help">Bạn cũng có thể tìm thấy tùy chọn đặt lại trung tâm theo dõi trong kính thông minh → Theo dõi → Mở thiết lập. Hiệu chuẩn camera đã lưu của bạn sẽ được giữ nguyên.</string>
|
||||
<string name="tracking_recovery_stabilizing">Giữ yên một lát</string>
|
||||
<string name="tracking_recovery_hold">Quá trình đặt lại trung tâm theo dõi đang diễn ra.\nGiữ kính thông minh ổn định trong khi quá trình theo dõi ổn định.</string>
|
||||
<string name="tracking_recovery_automatic">Màn hình này tự động đóng khi tính năng theo dõi đầu đã sẵn sàng.</string>
|
||||
<string name="glasses_steady_hand_aim">Ổn định mục tiêu bằng tay</string>
|
||||
<string name="glasses_steady_hand_aim_hint">Nhắm từ vai qua lòng bàn tay của bạn. Tắt để xoay điều khiển bằng cổ tay.</string>
|
||||
<string name="spatial_title">Thiết lập không gian</string>
|
||||
<string name="spatial_wait_tracking">Đang chờ theo dõi…</string>
|
||||
<string name="spatial_cameras_description">Camera theo dõi trái và phải</string>
|
||||
<string name="spatial_camera_sync">Đồng bộ hóa máy ảnh</string>
|
||||
<string name="spatial_ready">Sẵn sàng</string>
|
||||
<string name="spatial_sync_hint">Đang chờ camera và theo dõi đầu xếp hàng. Giữ kính thông minh được kết nối.</string>
|
||||
<string name="spatial_prepare">1. Chuẩn bị mục tiêu hiệu chuẩn</string>
|
||||
<string name="spatial_print_actual">In ở kích thước thực tế</string>
|
||||
<string name="spatial_print_hint">Mỗi hình vuông phải có kích thước 30 mm (1,181 in). Đặt tấm phẳng trên bề mặt cứng ở khu vực có nhiều ánh sáng.</string>
|
||||
<string name="spatial_print">In bảng hiệu chuẩn</string>
|
||||
<string name="spatial_capture_group">2. Chụp các góc nhìn khác nhau</string>
|
||||
<string name="spatial_board_stationary">Giữ mục tiêu hiệu chuẩn cố định</string>
|
||||
<string name="spatial_capture_hint">Di chuyển kính thông minh lại gần, xa hơn và sang một bên. Xoay chúng sang trái/phải, nghiêng chúng lên/xuống và nghiêng chúng sang một bên. Giữ mục tiêu hiệu chỉnh trong cả hai máy ảnh và tạm dừng một thời gian ngắn trước mỗi lần chụp.</string>
|
||||
<string name="spatial_start">Bắt đầu hiệu chuẩn mới</string>
|
||||
<string name="spatial_wait_sync">Đang chờ đồng bộ hóa camera.</string>
|
||||
<string name="spatial_start_hint">Bắt đầu hiệu chỉnh mới để thu thập lượt xem.</string>
|
||||
<string name="spatial_views_hint">Giữ mục tiêu hiệu chỉnh hiển thị trong cả hai bản xem trước. Chụp ít nhất 24 góc nhìn sắc nét từ các góc khác nhau.</string>
|
||||
<string name="spatial_capturing">Đang nắm bắt…</string>
|
||||
<string name="spatial_capture">Chụp ảnh mục tiêu hiệu chỉnh</string>
|
||||
<string name="spatial_alignment">Tính toán căn chỉnh camera</string>
|
||||
<string name="spatial_calculating">Đang tính…</string>
|
||||
<string name="spatial_calculate">Tính toán hiệu chuẩn</string>
|
||||
<string name="spatial_distance_group">3. Kiểm tra khoảng cách</string>
|
||||
<string name="spatial_distance">Khoảng cách đo được</string>
|
||||
<string name="spatial_distance_hint">Bắt đầu với 12 inch hoặc 30 cm để các điểm đánh dấu được in dễ phát hiện hơn. Chọn phép đo chính xác mà bạn sẽ sử dụng.</string>
|
||||
<string name="spatial_camera_board_distance">Camera trái đến trung tâm mục tiêu hiệu chỉnh</string>
|
||||
<string name="spatial_checking_distance">Đang kiểm tra khoảng cách…</string>
|
||||
<string name="spatial_validate">Xác thực khoảng cách</string>
|
||||
<string name="spatial_diagnostics">Chẩn đoán</string>
|
||||
<string name="spatial_show_diagnostics">Hiển thị chẩn đoán</string>
|
||||
<string name="spatial_diagnostics_hint">Công cụ phục hồi theo dõi và định giờ của máy ảnh.</string>
|
||||
<string name="spatial_camera_timing">Thời gian của máy ảnh</string>
|
||||
<string name="spatial_hand_input">Đầu vào từ theo dõi bàn tay</string>
|
||||
<string name="spatial_wait_timing">Đang chờ thời gian của máy ảnh.</string>
|
||||
<string name="spatial_frames">Hình ảnh máy ảnh</string>
|
||||
<string name="spatial_gpu">GPU phát hiện bàn tay</string>
|
||||
<string name="spatial_gpu_hint">CPU là mặc định. GPU đang ở giai đoạn thử nghiệm và có thể khiến SteamVR khởi động lại. Lựa chọn này sẽ đặt lại khi quá trình theo dõi khởi động lại.</string>
|
||||
<string name="spatial_lite">Phát hiện mẫu bàn tay nhẹ nhàng</string>
|
||||
<string name="spatial_lite_hint">Sử dụng bộ dò tìm lòng bàn tay Lite và các điểm chính Lite trên bàn tay. Kiểm tra độ chính xác của việc nhắm, chụm và lấy. Đặt lại khi theo dõi khởi động lại.</string>
|
||||
<string name="spatial_adaptive">Tần số đầu vào tự động để theo dõi bàn tay</string>
|
||||
<string name="spatial_adaptive_hint">Điều chỉnh đầu vào theo tốc độ xử lý. Đặt lại khi theo dõi khởi động lại.</string>
|
||||
<string name="spatial_half_rate">Giới hạn tần số đầu vào để theo dõi bàn tay</string>
|
||||
<string name="spatial_half_rate_hint">Sử dụng một nửa số hình ảnh của camera. Tắt để so sánh tần số tối đa. Đặt lại khi theo dõi khởi động lại.</string>
|
||||
<string name="spatial_diagnostic_capture">Chụp chẩn đoán</string>
|
||||
<string name="spatial_diagnostic_capture_hint">Lưu cục bộ một cặp hình ảnh nổi. Hình ảnh chỉ được lưu khi được yêu cầu.</string>
|
||||
<string name="spatial_save_frame">Lưu hình ảnh camera</string>
|
||||
<string name="spatial_restart_tracking">Khởi động lại theo dõi</string>
|
||||
<string name="spatial_restart_hint">Sử dụng nếu việc theo dõi không phục hồi ở khu vực có đủ ánh sáng. Việc khởi động lại yêu cầu nguồn gốc theo dõi mới.</string>
|
||||
<string name="spatial_restart">Khởi động lại</string>
|
||||
<string name="spatial_restart_title">Khởi động lại theo dõi?</string>
|
||||
<string name="spatial_restart_confirm">Các chế độ xem hiệu chuẩn chưa được lưu sẽ bị mất. Sau đó, giữ kính thông minh yên và đặt lại trung tâm theo dõi khi quá trình theo dõi được khôi phục.</string>
|
||||
<string name="spatial_views_count">%1$d / 24 lượt xem được chụp</string>
|
||||
<string name="spatial_capture_paused">Đã tạm dừng chụp: %1$s</string>
|
||||
<string name="spatial_measure_hint">Biện pháp %1$s. Hiển thị mục tiêu hiệu chỉnh hoàn chỉnh trong cả hai bản xem trước, sau đó giữ yên.</string>
|
||||
<string name="spatial_timing_values">%1$.1f Hz • tuổi hình ảnh %2$.1f ms • xử lý %3$.1f ms</string>
|
||||
<string name="spatial_input_values">Giới hạn đầu vào %1$.1f Hz • %2$.0f%% hình ảnh camera. Theo dõi đầu tiếp tục ở tần số tối đa.</string>
|
||||
<string name="spatial_frame_counts">%1$d đã xử lý • %2$d bị loại bỏ • %3$d bị bỏ qua theo giới hạn đầu vào</string>
|
||||
<string name="spatial_print_job">DroidDeck ChArUco 30 mm</string>
|
||||
<string name="spatial_print_title">DroidDeck - Hiệu chuẩn Luma Ultra</string>
|
||||
<string name="spatial_print_scale" formatted="false">In ở tỷ lệ 100% / Kích thước thực tế. Mỗi hình vuông: 30 mm (1,181 in).</string>
|
||||
<string name="spatial_print_stationary">Giữ mục tiêu hiệu chỉnh bằng phẳng và cố định; di chuyển kính thông minh giữa các lần chụp.</string>
|
||||
<string name="spatial_print_check">Kiểm tra tỷ lệ: 100 mm (3,937 in) giữa các dấu tích</string>
|
||||
<string name="spatial_distance_12in">12 inch (30,48 cm)</string>
|
||||
<string name="spatial_distance_30cm">30 cm (11,81 inch)</string>
|
||||
<string name="spatial_distance_20in">20 inch (50,8 cm)</string>
|
||||
<string name="spatial_distance_50cm">50 cm (19,69 in)</string>
|
||||
<string name="spatial_disabled">Vô hiệu hóa</string>
|
||||
<string name="spatial_wait_stable">Đang chờ theo dõi ổn định</string>
|
||||
<string name="spatial_disconnected">Đã ngắt kết nối</string>
|
||||
<string name="spatial_hands_off">Bộ điều khiển được vận hành bằng tay trần đã tắt</string>
|
||||
<string name="spatial_tracking_off">Tính năng theo dõi vị trí bị tắt hoặc kính thông minh bị ngắt kết nối</string>
|
||||
<string name="spatial_recenter_pending">Yêu cầu đặt lại trung tâm theo dõi — giữ yên trong khi quá trình theo dõi ổn định</string>
|
||||
<string name="spatial_tracking_lost">Mất dấu vết — đối mặt với khu vực đủ ánh sáng với chi tiết rõ ràng</string>
|
||||
<string name="spatial_origin_changed">Gốc theo dõi đã thay đổi — chạm vào đặt lại trung tâm theo dõi, sau đó giữ yên</string>
|
||||
<string name="spatial_active">6DoF hoạt động</string>
|
||||
<string name="spatial_connect_hint">Kết nối Luma Ultra và bật theo dõi vị trí.</string>
|
||||
<string name="spatial_validation_session">Đã xác minh hiệu chuẩn cho kết nối này.</string>
|
||||
<string name="spatial_validation_saved">Đã xác minh và lưu hiệu chuẩn.</string>
|
||||
<string name="spatial_wait_cameras">Đang chờ camera lập thể</string>
|
||||
<string name="spatial_wait_hands">Chờ theo dõi bàn tay</string>
|
||||
<string name="spatial_collect_instructions">Giữ mục tiêu hiệu chỉnh 5 × 7 cố định. Chụp hơn 24 góc nhìn trong khi di chuyển và xoay kính thông minh.</string>
|
||||
<string name="spatial_capture_pending">Đang chờ hình ảnh camera tiếp theo. Giữ yên kính thông minh.</string>
|
||||
<string name="spatial_validation_pending">Kiểm tra hình ảnh camera tiếp theo. Giữ mục tiêu hiệu chỉnh đầy đủ hiển thị và giữ yên.</string>
|
||||
<string name="spatial_start_first">Bắt đầu hiệu chỉnh trước</string>
|
||||
<string name="spatial_no_camera_frame">Không có hình ảnh máy ảnh mới nào được gửi đến. Hãy kiểm tra kết nối của kính thông minh và các bản xem trước của máy ảnh, sau đó thử lại.</string>
|
||||
<string name="spatial_clock_reset">Đặt lại đồng hồ máy ảnh</string>
|
||||
<string name="spatial_frame_changed">Hệ tọa độ theo dõi đã thay đổi. Các chế độ xem của bạn được lưu để tính toán lại. Đặt lại trung tâm theo dõi, sau đó bắt đầu một bộ mới để chụp thêm chế độ xem.</string>
|
||||
<string name="spatial_device_loaded">đã tải hiệu chuẩn thiết bị</string>
|
||||
<string name="spatial_base_loaded">Đã tải hiệu chuẩn cơ sở Luma Ultra</string>
|
||||
<string name="spatial_calibration_needed">cần hiệu chuẩn</string>
|
||||
<string name="spatial_tap_start">Trước tiên hãy nhấn vào Bắt đầu hiệu chuẩn mới.</string>
|
||||
<string name="spatial_capture_recenter_pending">Đang chờ theo dõi ổn định. Giữ yên trong giây lát.</string>
|
||||
<string name="spatial_capture_recenter">Quá trình theo dõi đã thay đổi. Chạm vào đặt lại trung tâm theo dõi một lần, sau đó giữ yên trước khi chụp.</string>
|
||||
<string name="spatial_capture_unsynchronized">Không thể chụp: tính năng theo dõi đầu chưa đồng bộ hoặc đã thay đổi trong khi chụp. Giữ yên và thử lại.</string>
|
||||
<string name="spatial_align_first">Tính toán căn chỉnh camera trước khi kiểm tra khoảng cách.</string>
|
||||
<string name="spatial_processing_failed">xử lý máy ảnh không thành công</string>
|
||||
<string name="spatial_hand_head_changed">Tính năng theo dõi đầu đã thay đổi trong quá trình phát hiện bàn tay</string>
|
||||
<string name="spatial_hand_wait_sync">Đang chờ đồng bộ hóa camera và đầu</string>
|
||||
<string name="spatial_no_wrists">Không phát hiện thấy cổ tay. Giữ tay cầm điều khiển Joy-Con của bạn ở phía trước kính thông minh</string>
|
||||
<string name="spatial_no_hands">Không phát hiện thấy bàn tay nào. Hiển thị lòng bàn tay mở trước kính thông minh</string>
|
||||
<string name="spatial_one_camera_wrists">Chỉ có thể nhìn thấy cổ tay trong một camera; giữ các tay cầm điều khiển của bạn ở chế độ xem chung</string>
|
||||
<string name="spatial_one_camera_hands">Chỉ nhìn thấy bàn tay trong một camera; giữ cả hai lòng bàn tay trong chế độ xem chung</string>
|
||||
<string name="spatial_ambiguous_hands">Cả hai camera đều nhìn thấy bàn tay, nhưng việc khớp trái/phải không rõ ràng</string>
|
||||
<string name="spatial_inconsistent_depth">Đã phát hiện thấy bàn tay nhưng độ sâu lập thể không nhất quán</string>
|
||||
<string name="spatial_rejected_wrist">Vị trí cổ tay bị từ chối bởi kiểm tra lập thể hoặc chuyển động</string>
|
||||
<string name="spatial_inconsistent_palm">Đã phát hiện thấy các điểm nổi, nhưng hình dạng lòng bàn tay không nhất quán</string>
|
||||
<string name="spatial_hands_need_calibration">Hoàn tất hiệu chỉnh và kiểm tra khoảng cách để kích hoạt tay</string>
|
||||
<string name="spatial_hands_wait_stable">Đang chờ theo dõi đầu ổn định; đặt lại trung tâm theo dõi nếu được yêu cầu</string>
|
||||
<string name="spatial_old_frame">Camera quan sát quá cũ; đang chờ một cặp mới</string>
|
||||
<string name="spatial_fit_ready">Vừa vặn %1$.2f px. Đo khoảng cách đã chọn của bạn từ camera bên trái đến trung tâm mục tiêu hiệu chỉnh, sau đó xác thực.</string>
|
||||
<string name="spatial_opencv_error">OpenCV không có sẵn: %1$s</string>
|
||||
<string name="spatial_restored">%1$d lượt xem đã lưu được khôi phục. Tính toán hiệu chuẩn để thử lại hoặc bắt đầu một bộ mới để thu được nhiều dữ liệu hơn.</string>
|
||||
<string name="spatial_captured">Đã chụp được %1$d / 24 lượt xem. Giữ mục tiêu hiệu chuẩn cố định; di chuyển kính thông minh để xem tiếp theo.</string>
|
||||
<string name="spatial_capture_corners">Ảnh chụp bị từ chối: %1$d / 12 góc bắt buộc hiển thị ở cả hai máy ảnh. Hiển thị thêm mục tiêu hiệu chỉnh, giữ yên rồi thử lại.</string>
|
||||
<string name="spatial_validation_error">Kiểm tra khoảng cách không thể hoàn thành: %1$s. Hãy thử lại.</string>
|
||||
<string name="spatial_inference_error">Không thể phát hiện bàn tay: %1$s. Thay đổi CPU/GPU hoặc bộ điều khiển chuyển đổi được vận hành bằng tay trần để thử lại.</string>
|
||||
<string name="spatial_hand_timeout">Phát hiện bàn tay vượt quá %1$d ms; quan sát bị loại bỏ</string>
|
||||
<string name="spatial_wrists_tracked">%1$d/2 vị trí cổ tay Joy-Con được đo bằng lập thể</string>
|
||||
<string name="spatial_palms_tracked">Lòng bàn tay được theo dõi: %1$d / 2; sẵn sàng chụm ngón: %2$d; sẵn sàng nắm: %3$d</string>
|
||||
<string name="spatial_capture_saved">Đã lưu bản chụp chẩn đoán vào %1$s</string>
|
||||
<string name="spatial_hand_error">Đã ngừng theo dõi bàn tay: %1$s</string>
|
||||
<string name="spatial_stereo_loaded">Lập thể %1$d×%2$d; %3$s</string>
|
||||
<string name="spatial_alignment_error">Theo dõi đầu và mục tiêu hiệu chỉnh không đồng nhất ở mức %1$s (giới hạn 5 cm / 2 in). Giữ mục tiêu hiệu chuẩn cố định và chờ theo dõi ổn định trước khi bắt đầu thiết lập mới. Xoay và nghiêng kính thông minh một cách nhẹ nhàng; tạm dừng trước mỗi lần chụp.</string>
|
||||
<string name="spatial_need_views">Chụp ít nhất 24 góc nhìn khác nhau của mục tiêu hiệu chỉnh cố định.</string>
|
||||
<string name="spatial_need_rotation">Xoay kính thông minh sang trái và phải và nghiêng lên xuống; chuyển động không xoay không thể hiệu chỉnh căn chỉnh camera.</string>
|
||||
<string name="spatial_bad_baseline">Đường cơ sở máy ảnh đáng kinh ngạc</string>
|
||||
<string name="spatial_need_orientations">Di chuyển đầu của bạn theo nhiều hướng khác nhau.</string>
|
||||
<string name="spatial_bad_rotation">Xoay camera đối đầu không hợp lệ</string>
|
||||
<string name="spatial_bad_alignment">Căn chỉnh giữa máy ảnh và đầu không nhất quán.</string>
|
||||
<string name="spatial_calibration_error">Hiệu chỉnh không thể hoàn tất. %1$s Chế độ xem đã chụp của bạn sẽ được lưu.</string>
|
||||
<string name="spatial_reprojection_error">Lỗi chiếu lại bị giữ lại %1$.2f px vượt quá 2 px. Hiệu chỉnh lại.</string>
|
||||
<string name="spatial_distance_corners">%1$d / Đã phát hiện 24 góc bàn cờ ở cả hai máy ảnh. Giữ mục tiêu hiệu chỉnh đầy đủ hiển thị và giữ yên. Nếu nó đã hiển thị, hãy chọn 12 inch hoặc 30 cm và đo khoảng cách gần hơn đó trước khi thử lại.</string>
|
||||
<string name="spatial_distance_depth">Mục tiêu hiệu chuẩn có thể nhìn thấy được nhưng độ sâu của nó không thể đo được một cách đáng tin cậy. Giữ cố định kính thông minh và giữ mục tiêu hiệu chỉnh bằng phẳng và đủ ánh sáng, sau đó thử lại.</string>
|
||||
<string name="spatial_distance_invalid">Phép đo của camera không hợp lệ. Giữ yên và thử lại.</string>
|
||||
<string name="spatial_distance_passed">Đã vượt qua kiểm tra khoảng cách.</string>
|
||||
<string name="spatial_distance_retry">Kiểm tra lại khoảng cách từ máy ảnh bên trái đến tâm mục tiêu hiệu chỉnh, sau đó thử lại.</string>
|
||||
<string name="spatial_distance_result">Máy ảnh đo được %1$s; khoảng cách đã chọn %2$s. %3$s</string>
|
||||
<string name="spatial_wait_previews">Đợi cả hai bản xem trước của máy ảnh trước khi bắt đầu hiệu chỉnh.</string>
|
||||
<string name="spatial_saved_views_hint">Các lượt xem đã lưu có thể được tính toán lại. Bắt đầu hiệu chuẩn mới để chụp trong hệ tọa độ theo dõi hiện tại.</string>
|
||||
<string name="spatial_model_checksum_error">Tổng kiểm tra mô hình bàn tay không khớp</string>
|
||||
<string name="spatial_opencv_load_error">OpenCV không thể tải</string>
|
||||
<string name="tracking_recovery_look">Nhìn xung quanh chậm rãi trong phòng có đủ ánh sáng.\nGiữ cho camera theo dõi rõ ràng và hướng về phía đồ nội thất hoặc các chi tiết có thể nhìn thấy khác.</string>
|
||||
</resources>
|
||||
Reference in new issue
Block a user