With no frame limit, AIO's Direct3D 7 (DirectDraw) test ran at exactly
144 fps on a 144 Hz panel: every frame waited one refresh (6.94 ms).
Wine asks for a swap interval of 1 on every OpenGL window, and WineD3D's
front-buffer drawing used by DirectDraw and Direct3D 1-7 never lowers
it; it only sets the interval in its present path. Mesa's Zink then
presents in FIFO.
droiddeck-game-env sets vblank_mode=0 for games launched through Proton
before the game's environment edits, so a value set in the launch
options or the editor wins and an editor Remove leaves Mesa's default.
Steam's own runs in compatdata/0 are unchanged. Steam's Frame Limit
still holds a game: gamescope's WSI layer presents every swapchain in
FIFO while its limiter is on.
On the AYANEO Pocket FIT, AIO Direct3D 7 went from 144 to 2,345 and
2,265 fps (1 % low 99 -> 620) with no limit; with the Quick Access
limit at 144 and 72 it held at 143.76 and 71.92.
At every start, Steam's shader pre-caching runs d3ddriverquery64.exe
through each Proton tool (DroidDeck-Proton and the ARM64 Proton) in
compatdata/0. Here the query has never succeeded (948 of 948 runs in
the client's shader log failed, mostly exit code 1), and each run
started Wine in that prefix, where the two Protons upgraded it back and
forth (11.0-100 <-> GE-Proton11-11) with the 32-bit wine.inf install.
When that overlapped a game's start, AIO ran 25-30 % slower for its
first 5-7 seconds.
Both Proton wrappers now exit 1 for Steam's own query, "run
.../d3ddriverquery64.exe" (or the 32-bit name) with STEAM_COMPAT_DATA_PATH
in compatdata/0, before doing anything else, so Steam gets the same
failure without Wine. Every other verb and prefix goes on to Proton.
Wine numbers the Windows CPUs like the host, so Windows CPU 0 was host
core 0, a small core on most Android chips. Games that pin their main
thread to CPU 0 ran it there: GTA IV 32 fps on the AYANEO Pocket FIT,
61 fps once CPU 0 is the fastest core.
droiddeck-game-env hands Wine the game's cores fastest first, from each
core's cpu_capacity (or its top clock). Equal cores keep their order.
Cores picked globally or in a game profile stay the only cores the game
sees, now fastest first; a pick only counts when it narrows the cores.
Games on Proton's own default_cpu_limit list keep their count on the
fastest cores (quoted and unquoted counts); other values such as "P"
are left to Proton. A typed WINE_CPU_TOPOLOGY / PROTON_CPU_TOPOLOGY
still wins, an empty one turns it off for a game, and
DROIDDECK_FASTEST_CORES=0 turns it off. Steam's own Proton runs in
compatdata/0 are left as before.
Builds on maxjivi05's "Windows games see only the cores they are pinned
to" (9d85af75).
The Steam helper checked the Frame Limit only when the offered frame
rates changed. With the limit off during a refresh change, turning it
back on left a value the new rate does not offer, and a failed write was
not tried again. It now checks on every state change and every 5 s, and
waits for Steam's settings write so a rejected write is caught and tried
again on the next check.
gamescope 3.16.29-p16 (0120 changed): gamescope took a new host refresh
only from the presentation feedback of a frame it drew, so with nothing
moving on screen it kept the old rate. It now presents once when the
host's wl_output mode changes and keeps presenting while a new rate is
pending, so the 300 ms check runs on a still screen too.
Found by CodeRabbit in the reviews of #1650 and #1663.
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
skate. under ReSkate crashed with an access violation in Skate.exe 12 to
60 seconds after it started at the default feature level 12_2; at 12_1
it loads San Vansterdam and plays. The rule matches Skate.exe with
ReSkate.dll beside it, so it covers ReSkate started from skate.'s own
Steam entry and as a non-Steam game, and a game profile can still set
another level.
Proton sets WINE_CPU_TOPOLOGY from its own default_cpu_limit for games
like Prototype (8 cores) unless PROTON_CPU_TOPOLOGY is set, so the
pinned topology never reached the game the issue was about.
Game cores pinned the game with taskset, but Wine counts the online
CPUs, so a game held to two cores still saw eight processors and sized
its thread pools for them. Prototype freezes at its splash screen that
way. When the session or a game profile limits the game cores, Wine now
gets WINE_CPU_TOPOLOGY for exactly those cores unless the profile sets
its own.
The Crew 2 loads D3DGear64.dll from its folder. Its DXGI Present hook
faults over a thousand times within seconds under Wine and the game
never presents again: black screen while the sound keeps playing.
droiddeck-game-env now disables the DLL when it finds it beside the
game, and DLL overrides from several engine fixes are kept together
instead of the last one replacing the others.
Steam's native QAM sliders now control Android brightness and media
volume, with device changes reflected back in Steam. Holding Android
Back for 700 ms sends a real held QAM button for Steam shortcuts. Single
and double taps keep the existing menu/QAM order and swap setting; the
double-tap window remains 500 ms.
- Discover native brightness through a guest backlight descriptor and
use Android's Modify system settings permission. Retain the latest
pending request until permission is granted or the session stops, with a
notification action for hidden sessions.
- Give DirectAudio and fallback AAudio sinks Android media volume/mute
callbacks, keeping software gain at unity. Recover when initial volume
state is absent or invalid, brightness acknowledgements differ or never
arrive, or the Display bridge is not ready yet.
- Forward other buttons while QAM is held in Steam Deck and Steam
Controller modes. Consume release after a hold and clear pending input
on overlays, focus loss, pause, disconnect, and teardown. The session
menu retains its compact Back choice without an explanatory paragraph.
Validation:
- Local ARM64 release build passed. The latest timing change passed 20
targeted input tests, including release at 600 ms remaining a tap. The
preceding full feature check passed 61 Android input/device-control
tests, with permission cases on API 28 and 33.
- 66 Linux Python/Node/C tests passed for device controls, audio
recovery, Steam compatibility, and file dialogs. Both audio sink modules
rebuilt with Android NDK 27.2.
- Release-signed integration build 14d12cf0 is installed on the unrooted
AYN Thor, carrying the Android/input changes through 749ade4a plus the
existing portrait changes. Device checks confirmed the configured
QAM/menu tap order, Back dismissal, removal of the inline menu
description, and held QAM overlapping X with clean release. Hands-on
testing confirmed this installed build works.
- Earlier Thor testing covered brightness permission and pending
requests, brightness synchronization in both directions, native volume
changes, hardware volume key readback, and both sink backends. Failure
recovery is covered by the automated tests above.
The subsequent queued-notification fix in 4d7ceb23 is covered by the
Linux regression suite and has not replaced the Thor install.
Bluetooth/wired output switching and other device models remain
untested. CI and CodeRabbit monitoring continue against the pushed head.
A tag that matches no longer vouches for the build: FEX and FEXServer must
also load (ld.so --list), otherwise the session reinstalls it and x86
programs use the Steam or system FEX meanwhile.
A failed catalog install is retried after an hour or when the session names
another build, a missing updater falls back to the FEX already here, and the
archive download gives up on a stalled connection.
The Sentry GDExtension was turned off for every Godot game that ships it,
because its crash handler takes the .NET runtime down under FEX. GDScript
games such as Pathogenic call SentrySDK from their scripts, so without the
extension their autoloads fail to parse and the game quits. Only Godot .NET
builds have it turned off now.
The launch view lives under the app's files folder, so games saw an
install path like Z:\data\user\0\com.droiddeck.launcher\files\xbox-runtime
\views\launch-<n>\droiddeck-xbox-<id>. Forza Horizon checks that length and
quits with "Installation path is too long". The view is now mapped to a
free drive letter in the prefix (X: first) for the length of the launch.
A frame limit only paced what reached the screen: a game without vsync
kept drawing hundreds of frames a second that were thrown away (AIO at
a 60 fps limit drew 155 to 2,446 fps), so the limit saved no power.
With Performance mode on and a frame limit set, the session now sets
gamescope's per-game limit over gamescope_control (gamescopectl
debug_set_fps_limit). gamescope's limiter then has its WSI layer hold
Vulkan games, DXVK and VKD3D included, to the limit. gamescope's own
--framerate-limit option is reset on its first frame in 3.16.29, and
Steam resets the per-game limit while it starts, so the session watches
gamescope's limiter state file and sets the limit again whenever it is
off (a once-a-second check with shell builtins, no process started).
With Performance mode off, a limit paces the screen only, as before.
The session also gives gamescope a fixed limiter state file path, so
gamescope stops leaving a new one behind on every start, and removes
the old ones.
Device-proven on the AYANEO Pocket FIT (Turnip, AIO D3D11, 45 s runs on
battery, three runs each): at a 60 fps limit the game held exactly
60.0 fps and the device drew 7.08 W instead of 9.45 W, with 1.3 instead
of 2.6 busy cores and 5 instead of 11 % GPU load. No limit: unchanged.
Once Blizzard's Agent has removed a game it answers GET /game/<uid> with
an empty object, not installed false, so a finished uninstall read as a
failure and opened Battle.net.
A cancelled install now waits for its Agent job to end before the
uninstall runs, and removes the folder only once the Agent no longer
lists the game or the folder is empty. Uninstall gives up when Battle.net
or a game keeps the prefix busy for a minute, so the page falls back to
opening Battle.net. An uninstall only counts when the Agent reports the
game as not installed.
Battle.net games now install like Epic, Xbox and itch games: Install,
pick a location, and the download runs in the Downloads tab while the
Stores page stays open. droiddeck-battlenet starts Blizzard's own Agent
on its own under a headless gamescope and drives its local API, so no
window opens and nothing waits on the Battle.net client.
- Progress, speed and time left come from the Agent, with pause, resume
(the Agent keeps what it downloaded) and cancel, which uninstalls the
partial game and removes its folder.
- A job only finishes once the Agent has really run it and the game is
playable; the first status after a request can still describe the
previous operation.
- Installed games check Blizzard's version service and show Update when
the build on disk is behind; the update repairs missing files too.
- Battle.net games can be uninstalled from their page through the Agent.
- Games land in the chosen location: internal storage, other storage or
a Games folder.
- The hero keeps its action row clear of the playtime column.
Steam games and Battle.net started from the KDE desktop run on the GPU in gamescope, opened as a KDE window, and Plasma no longer leaves programs with a zero realtime CPU limit that got games killed.
* fix: Reuse the prefix the client made for a shortcut id
droiddeck-proton-run builds the prefix path as steamapps/compatdata/<appid>,
but the client names that folder with the signed 32-bit form of the shortcut
id. A shortcut whose id has the top bit set therefore got a second, empty
prefix, and the first launch after that ran wineboot from scratch: the
session sat on a black screen for the length of a full prefix init, and the
old prefix was never reused.
Match the folder by its unsigned value instead, the way the client does:
int(name) % 2 ** 32 == appid % 2 ** 32. prefix_of() also accepts a negative
folder name now, and reports its unsigned id so the Steam environment it sets
up stays valid.
* fix: Reject folder names int() cannot read, and skip files
lstrip("-").isdigit() accepts "--1" and superscript digits, which int() then
raises on, and one such entry in compatdata would stop shortcut resolution.
Match r"-?[0-9]+" instead. A matching name is also only used when it is a
directory, so a stray file cannot take STEAM_COMPAT_DATA_PATH.
* fix: reuse signed shortcut compatdata prefix
* fix: prefer initialized Proton shortcut prefixes
---------
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* feat: adjustable RAM and VRAM caps for the container
Performance > Memory gets two sliders:
- RAM cap (soft, Steam sessions): when the session is resident above the
cap, the session watcher compresses the Steam client into zRAM, waits for
its page-out acknowledgment, then compresses the rest of the session
(processes that loaded libblsession) if still over. Nothing is closed.
Measured at most every 30 s; the client is read back once usage drops
below the cap. Invalid values leave the cap off. Needs zRAM swap.
- VRAM cap: sets dxgi.maxDeviceMemory ahead of the game's own DXVK_CONFIG,
so Direct3D games budget for less video memory. A game profile still
wins. Applies from the next session.
* fix: back off the RAM cap when paging out cannot get under it
A cap below the game's working set was never met, so the watcher paged out
the client and the whole session every 30 s for the rest of the session.
Usage is still measured every 30 s, but after a page-out that leaves the
session over the cap the next one waits twice as long (60 s up to 10 min),
resetting once usage is under the cap. The client step is skipped while the
client is already under 512 MB resident.
* fix: RAM cap covers desktop Steam, signals each group once, no idle churn
- Steam opened from the desktop runs the same session watcher, so the cap
is exported whenever the Steam client runs, not only in Steam mode.
- The second page-out goes to the rest of the session only; Steam was
signalled again even when its own step had been skipped as already small.
- A cap page-out while no game runs stays paged out. Reading the client back
right away pushed it over the cap again and repeated every minute; only a
game closing while over the cap still defers a read-back.
* fix: RAM cap marks the client packed only when it compressed it
When the cap skipped the client as already small during a game, it still
recorded the client as packed, so the regular in-game client page-out
waited up to 300 s for a page-out that never happened.
---------
Co-authored-by: jazzyjames <182448902+jazzyjamesgames@users.noreply.github.com>
GE-based Protons, the default with the x86-64 Steam client, run umu-protonfixes. Its Black Ops III fix switches the prefix to Wine's ALSA driver, which has no device here and replaces DirectAudio, and its Dark Souls Remastered fix runs the VC++ 2017 installer, which fails under ARM64 Proton.
The412Banner