#1809 held Steam's own UI to an even share of the refresh near 60 fps whenever it had focus. On 120 Hz and faster screens Big Picture then felt locked at 60 while games ran at the full rate, and players reported it as a regression. The compositor now releases Steam UI buffers unpaced again, like a game's. The larger swapchain stays limited to games, so the client UI still uses gamescope's default image count.
* Warn when a drive used as a game library is linked at USB 2.0 speed
Reads the drive's USB link speed from sysfs through its mount, and shows a
dismissible warning with the USB generation, link speed and a tip for a
faster cable or drive. The warning returns after the drive is plugged in
again unless Don't show this again is switched on.
* Keep slow USB dismissals per plug-in across restarts and recheck after a dismiss
Dismissals are stored with the boot count and the USB bus and device number,
so they survive a process restart, end when that drive is plugged in again
even while the launcher is stopped, and never clear other drives. A dismiss
looks for the next slow drive, stale scans are dropped, and an unknown port
speed is no longer treated as a USB 2.0 port.
* Drop slow USB scans that a newer library or mount check has superseded
* Invalidate pending slow USB scans as soon as a media broadcast arrives
* Revalidate an open slow USB warning on every check and match raw mount library paths
Every check now rescans, so a warning that is already showing is replaced or
cleared when its drive is removed or the library changes. Library paths saved
under /mnt/media_rw are treated as their /storage volume.
* Keep the Don't show this again choice when a rescan closes the slow USB warning
* Save the slow USB opt-out before the launcher activity is torn down
The session HUD is FusionHUD (Bannerlator's HUD) with every reading taken from
the same source, and worked out the same way, as the MangoHud build that runs
Steam's performance overlay in a DroidDeck session.
- gamescope patch 0125 (gamescope-3.16.29-p19) shares the frame times that
mangoapp reads (one per signalled commit of connector 0) in a ring named by
DROIDDECK_HUD_FRAMES; the app reads it once per display frame and counts the
compositor's frames when gamescope sends none.
- MangoHud's rules: FPS over periods of at least 500 ms, frame time = 1000/FPS,
200-frame graph on a fixed 0-50 ms scale; CPU, GPU, temperatures, RAM, swap,
VRAM and battery from MangoHud's sources. Zones 22/26/28 are typed as GPU and
DDR sensors, so Steam's overlay CPU temperature no longer includes them.
- Five sizes in a panel shaped like the DroidDeck mark, with a centred header,
one left edge, neon outline and FPS; Minimal is the default size. Settings on
a new "Performance HUD" drawer page, with Bannerlator's options.
- The HUD reads sensors and polls frames only while it is drawn (not while
hidden, in picture-in-picture or behind another app), keeps its place after
picture-in-picture, and the diagnostics export has its own reader.
Device-tested on the AYANEO Pocket FIT: same readings as Steam's overlay side
by side in Dead Cells; the HUD updates in a game, hides in picture-in-picture
and comes back in place, no crashes.
Game and global component choices were written to desired.tsv only when a
selection changed, so a Proton build installed later (DroidDeck-Proton
11-11.8) had no rows and kept its bundled FEX. Battle.net's d2rfix FEX never
reached it and StarCraft died in ClientSdk.dll's DllMain. The choices are now
republished at session start and on Battle.net's FEX request whenever the
installed tools no longer match what was published.
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
* feat(input): support instant Back chords and tap timing
* fix(input): send QAM before shortcut inputs
* fix(input): stop delayed stick input on Back release
Adds a Performance mode switch under Mode settings > Frame rate, off by default and stored per mode like the frame limit. Off keeps today's behaviour. On:
- with no frame limit, the compositor hands buffers back to the game as soon as they are replaced instead of once per refresh, and gamescope's WSI layer is asked for at least 8 swapchain images; a chosen frame limit still paces
- DROIDDECK_WSI_BYPASS_CHECK_MS=100 lets gamescope's WSI layer reuse its present-time Xwayland bypass check (patch 0117, gamescope-3.16.29-p13); WINE_OFFSCREEN_CHECK_MS=100 does the same for winex11 once a DroidDeck-Proton release carries that fix. Off sets both to 0.
The gamescope pack now ships the patched WSI layer and SessionFiles stages it over the runtime's stock copy. Two per-game options, off by default: PROTON_DXVK_D3D8 and WINE_D3D_CONFIG renderer=vulkan|gl.
AIO Graphics Test on an AYANEO Pocket FIT (Adreno 750), off -> on: Vulkan 204 -> 1787, OpenGL 296 -> 2169, D3D12 308 -> 3563, D3D11 1133 -> 2874, D3D9 1253 -> 3098 fps; DiRT Showdown 92.2 -> 93.4 (GPU-bound).
Xbox Cloud Gaming: stream from the store and Games tab, native player with DroidDeck frame generation
Stream Xbox games with Xbox Cloud Gaming (Game Pass) from DroidDeck, outside
the Linux session.
- Backend: `xodus-cli cloud-token` (tools/xbox/droiddeck-cloud-token.patch)
gets the streaming tokens; they stay in memory.
- Web player (default): the Greenlight player page (tools/xcloud-player, MIT)
in a WebView, plus Microsoft's own xbox.com/play player. In-stream menu with
screen effects (sharpen, colour, deband, FXAA, CRT, NTSC, Toon, fps cap),
stream quality, performance overlay (level, layout, top right / top left)
and rumble.
- Native player (opt-in, Android 10+, Player engine: Native): Google's WebRTC
(io.github.webrtc-sdk 125.6422.07, BSD) with the Greenlight protocol ported
to Kotlin, in its own process (:xcloudnative) with its own instance of
DroidDeck's compositor. Decoded frames reach the compositor as
AHardwareBuffers (new stream mode, VK_ANDROID_external_memory_android_
hardware_buffer import), so DDFG 2x and LSFG 2x/3x/4x run on them. Live
frame generation, frame-rate target (presets and a 10-165 fps slider, even
pacing), zero-copy picture, small network buffer, fast decoder, instant
controller input, overlay with engine and on-screen fps, background end,
restart and web fallback. It takes the main process's tokens through
XboxCloudTokenService; they are fetched ahead while a cloud game is shown.
- The compositor requests the dma-buf import extensions only where the driver
has them (the system driver has none).
- Catalog: cloud availability, Game Pass plan CFQ7TTC0K6L8 counted, library
filter All / Owned / Game Pass / Cloud, Stream and Add to Games on the store
page, stream-only Games-tab entries (Stream + Download / Play + Stream).
- Xbox games get VC++ 2015-2022 and the ARM64 runtime registry entries
(vcredist2022_arm64, built in until the catalog has it) before each launch.
- Controller focus reaches pickers opened from a game page (install location,
uninstall); Add / Remove from Games keep the focus.
Credits: Greenlight by UnknownSKL (Jim Kroon), MIT, player and protocol;
Better xCloud for the resolution / OS mapping; MGamer404's Bannerlator #627
for the ARM64 runtime approach. Ported from the412banner's Bannerlator.
The content log was read with RandomAccessFile.readLine, one byte per read, on the main thread. A 4 MB log took about 2 s on the first poll, enough for an ANR on slower devices while a download runs. It is now read through a buffered reader with the same Latin-1 lines and offset, and the per-line regexes only run on lines that can match.
## Summary
droiddeck-ntsync (the userspace stand-in for the Linux ntsync driver,
Wine sync = ntsync) was slower than droiddeck-esync on every cheap
operation. On the tablet a `SetEvent` cost 0.94 µs against esync's 0.21
µs, and a wait on a signaled event 0.45 µs against 0.08 µs. Four things
made it slow:
- **Signal masking:** every operation blocked and restored the signal
mask, so each call made 2 `rt_sigprocmask` syscalls, and a blocking wait
made 4. The masking itself is needed: if Wine's suspend signal stopped a
thread while it held an object lock, a GC thread that suspended it and
then touched the same object would deadlock.
- **Queueing for objects that were already free:** a wait linked itself
onto every object and unlinked again even when the first object could
simply be taken.
- **Wakes nobody needed:** a futex wake syscall went out for every
handoff, even when the waiter was still spinning and would have seen the
change anyway.
- **One shared counter:** every call took and dropped a reference on a
single process-wide device counter, so threads working on unrelated
objects bounced one cache line between cores.
### Changes
- **Signals are deferred instead of masked:** handlers installed by
Wine's `ntdll.so` run behind a small trampoline. If such a signal
arrives inside a critical section (a per-thread depth count), it is
saved with its `siginfo` and sent again with `rt_tgsigqueueinfo`
(falling back to `tgkill`) as soon as the section ends.
- `sigaction` queries still return Wine's own handler.
- Synchronous signals (SEGV, BUS, ILL, FPE, TRAP, SYS) are never
wrapped, as before.
- Handlers installed by anything other than `ntdll.so` are left alone.
- **Wait-any fast path:** an object that is signaled and has nobody
queued on it is taken directly, in index order. A wait whose timeout has
already passed returns `ETIMEDOUT` without building a queue.
- **Short spin before sleeping:** a waiter spins for up to 4 µs, bounded
by time rather than by iteration count, before it sleeps on the futex.
- **Wake only sleeping waiters:** the waiter publishes a `sleeping`
flag, and the waker only calls `FUTEX_WAKE` when it is set. Both sides
use seq_cst ordering, so a wake can't be lost. The queue layout changed,
so `NS_VERSION` is now 2.
- **Per-thread device reference:** a thread takes one reference on the
device the first time it uses it and keeps it until it exits or moves to
another device, instead of two atomics on the shared counter per call.
- **More than four signals in one section:** a fifth distinct signal is
held pending with the thread's signal mask, then released once the
section ends. Its handler never runs while an object lock is held.
- **Replay:** deferred signals are replayed with every signal blocked,
so each one is sent exactly once. A held signal is released at the same
signal-nesting level that held it. Handlers installed with
`SA_RESETHAND` are not wrapped, so a one-shot handler keeps its kernel
behaviour.
- **Waits from a handler during another wait's sleep:** they get their
own queue and, for a second device, a reference for that call only. The
outer wait keeps its queue and can't pick up the inner wait's result.
### ntsync becomes the default
- **New installs:** start on ntsync.
- **Existing installs:** move to ntsync once, on the first start of this
version, whatever sync they were on before (a one-time `ntsyncDefaultV1`
marker). Anything picked after that is kept, including esync, fsync and
wineserver.
- **Wording:** the ntsync switch in Performance no longer says
"experimental" or "for testing", in all 33 languages.
- **Unchanged:** per-game sync choices on a game's settings page still
win over the app-wide choice. Proton builds without ntsync still fall
back to droiddeck-esync, then droiddeck-fsync.
- **Tests:** `SyncBackendTest` covers a fresh install, each earlier
choice moving to ntsync once, and a later choice surviving the next
start. All 2,160 unit tests pass.
## Performance (REDMAGIC tablet)
Windows microbenchmark (`syncbench.exe`, x86-64 under FEX), µs per
operation:
| | esync | ntsync before | ntsync after |
|---|---|---|---|
| SetEvent | 0.57 / 0.70 | 0.51 / 0.65 | 0.38 / 0.35 |
| wait on signaled event | 0.13 / 0.13 | 0.44 / 0.43 | 0.27 / 0.20 |
| wait, timeout 0 | 0.27 / 0.25 | 0.52 / 0.51 | 0.19 / 0.18 |
| semaphore release + wait | 0.72 / 0.68 | 0.66 / 0.63 | 0.12 / 0.16 |
| mutex wait + release | 0.77 / 0.73 | 0.66 / 0.64 | 0.12 / 0.12 |
| wait on 8 objects | 0.10 / 0.09 | 0.59 / 0.57 | 0.15 / 0.15 |
| alertable wait | 0.06 / 0.05 | 0.43 / 0.42 | 0.07 / 0.07 |
| event ping-pong, 2 threads | 25.6 / 24.5 | 24.4 / 29.3 | 1.97 / 1.66 |
| 4 threads on one semaphore | 9.4 / 4.6 | 20.3 / 19.1 | 7.3 / 7.6 |
The backend each run actually used was checked from its file
descriptors:
- **esync:** wineserver held eventfds.
- **ntsync:** wineserver held the `droiddeck-ntsync` device and its
timerfd objects.
Native arm64 benchmark against the device directly, µs (before / after):
- set: 0.31–0.36 → 0.06–0.08
- signaled wait: 0.37–0.45 → 0.04–0.08
- semaphore pair: 0.56–0.58 → 0.06–0.07
- mutex pair: 0.56–0.61 → 0.04
- ping-pong: 15–30 → 1.7–2.5
Removing the shared device counter on its own takes 4 threads working on
their own objects from 0.21 to 0.04 µs per operation (x86-64 host).
Games, default Steam launch, The Forest and PEAK at the same scene each
run, 20 s pacing. Columns are esync, ntsync before and ntsync after;
each cell gives two runs.
| | esync | ntsync before | ntsync after |
|---|---|---|---|
| The Forest Low, fps | 64.5 / 61.9 | 70.1 / 74.8 | 72.1 / 72.1 |
| The Forest Low, CPU | 489 / 511% | 434 / 419% | 436 / 426% |
| The Forest High, fps | 58.3 / 57.8 | 72.0 / 69.8 | 72.5 / 69.9 |
| The Forest High, CPU | 506 / 504% | 417 / 429% | 425 / 435% |
| PEAK, fps | 50.4 / 48.6 | — | 47.0 |
| RDR2, launch to signed in / game process | — | — | 29.2 / 42.0 s and
28.3 / 41.1 s |
Two more games, esync against ntsync after, three runs each, default
settings:
| | esync | ntsync after |
|---|---|---|
| Among Us, menu fps (59 cap) | 59.0 / 58.9 / 59.3 | 59.0 / 59.0 / 58.7
|
| Among Us, launch to main menu | 6.65 / 6.84 / 6.85 s | 6.39 / 6.52 /
6.64 s |
| Among Us, CPU | 123 / 132 / 133% | 133 / 133 / 124% |
| Mortal Kombat X attract fight, fps | 56.7 / 54.1 / 56.3 | 61.1 / 56.9
/ 56.2 |
| Mortal Kombat X, 1% low | 20.0 / 30.3 / 30.3 | 30.3 / 30.3 / 30.3 |
| Mortal Kombat X, launch to window | 7.75 / 7.79 / 7.75 s | 7.81 / 7.71
/ 7.63 s |
Mortal Kombat X's CPU moves between 140% and 275% in both modes because
the attract mode changes fighters and stage, so it isn't compared.
The Forest's 1% low was 41.7 fps in every run. PEAK is GPU-bound and
stays in run-to-run noise. Its second ntsync run stopped at the title
menu because the rig's menu input didn't register; the game was still
running at 87 fps, and the same rig miss happened on esync before. RDR2
signs in and reaches the game on the new code.
## Tests
- **`tools/tests/test_ntsync_preload.py` (new):** builds the preload and
checks the emulation against the semantics documented for the kernel
driver:
- semaphore counts and `EOVERFLOW`;
- mutex owners, recursion, `EPERM`, kill/abandon with `EOWNERDEAD` on
read and on the next wait;
- auto and manual events, set/reset/pulse previous state;
- wait-any index order, duplicates, the alert object, `EINVAL` limits,
timeouts;
- wait-all atomicity, duplicates and alert;
- wakes across threads and across processes (inherited fds and fds sent
with `SCM_RIGHTS`);
- 20,000-round ping-pong and 4-thread semaphore stress with infinite
timeouts;
- two signal cases. In one, a handler that re-enters the same object is
fired 2,000 times at a busy thread. In the other, a handler parks the
thread while another thread uses the same object, as Wine's suspend does
under a GC.
- eight real-time signals fired in bursts at a thread busy on one
object, each handler touching that object, so more signals arrive inside
a section than can be deferred;
- a handler that waits on the same device and on a second device while
its thread sleeps in another wait;
- a one-shot (`SA_RESETHAND`) handler installed and fired 300 times at a
busy thread, every one of which must run.
- **The signal tests catch a broken implementation:** with signal
protection removed, the program hangs and the test fails. Before the
last fix, the burst test hung and the outer wait returned the nested
wait's result.
- **The suite passes:** 8 of 8 runs natively on arm64 under proot on the
tablet, and 40 of 40 on the host.
- **On the final build:** The Forest Low ran at 77.7 fps, PEAK at 47.5
fps, and Among Us and two Mortal Kombat X runs played through.
- **The new paths stay out of the way in games:** a build that logged
them saw about 1,400 Wine signals land during ntsync sleeps over two
Mortal Kombat X runs and one The Forest run. None of those handlers
waited on ntsync and no signal was held back, so games run the same code
as before the last fix. The Forest Low ran at 71.6 fps and PEAK at 47.2
fps on the final build.
- **Existing preload tests still pass:** fsync, openat2, usr2 (also with
`BL_SYNC=1`), tracer, dircache, noexec, binfmt, faultreport and esync
packs.
## Credits
- [Linux](https://github.com/torvalds/linux)
`Documentation/userspace-api/ntsync.rst` (GPL-2.0): the object, wait and
error semantics the new test checks. Also added to the README credits.
- New installs start on ntsync.
- Existing installs move to ntsync once on the first start of this version, whatever sync they used before. A choice made after that is kept.
- The ntsync switch is no longer labelled experimental or for testing, in every language.