Game and global component choices were written to desired.tsv only when a
selection changed, so a Proton build installed later (DroidDeck-Proton
11-11.8) had no rows and kept its bundled FEX. Battle.net's d2rfix FEX never
reached it and StarCraft died in ClientSdk.dll's DllMain. The choices are now
republished at session start and on Battle.net's FEX request whenever the
installed tools no longer match what was published.
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
* feat(input): support instant Back chords and tap timing
* fix(input): send QAM before shortcut inputs
* fix(input): stop delayed stick input on Back release
Steam's native QAM sliders now control Android brightness and media
volume, with device changes reflected back in Steam. Holding Android
Back for 700 ms sends a real held QAM button for Steam shortcuts. Single
and double taps keep the existing menu/QAM order and swap setting; the
double-tap window remains 500 ms.
- Discover native brightness through a guest backlight descriptor and
use Android's Modify system settings permission. Retain the latest
pending request until permission is granted or the session stops, with a
notification action for hidden sessions.
- Give DirectAudio and fallback AAudio sinks Android media volume/mute
callbacks, keeping software gain at unity. Recover when initial volume
state is absent or invalid, brightness acknowledgements differ or never
arrive, or the Display bridge is not ready yet.
- Forward other buttons while QAM is held in Steam Deck and Steam
Controller modes. Consume release after a hold and clear pending input
on overlays, focus loss, pause, disconnect, and teardown. The session
menu retains its compact Back choice without an explanatory paragraph.
Validation:
- Local ARM64 release build passed. The latest timing change passed 20
targeted input tests, including release at 600 ms remaining a tap. The
preceding full feature check passed 61 Android input/device-control
tests, with permission cases on API 28 and 33.
- 66 Linux Python/Node/C tests passed for device controls, audio
recovery, Steam compatibility, and file dialogs. Both audio sink modules
rebuilt with Android NDK 27.2.
- Release-signed integration build 14d12cf0 is installed on the unrooted
AYN Thor, carrying the Android/input changes through 749ade4a plus the
existing portrait changes. Device checks confirmed the configured
QAM/menu tap order, Back dismissal, removal of the inline menu
description, and held QAM overlapping X with clean release. Hands-on
testing confirmed this installed build works.
- Earlier Thor testing covered brightness permission and pending
requests, brightness synchronization in both directions, native volume
changes, hardware volume key readback, and both sink backends. Failure
recovery is covered by the automated tests above.
The subsequent queued-notification fix in 4d7ceb23 is covered by the
Linux regression suite and has not replaced the Thor install.
Bluetooth/wired output switching and other device models remain
untested. CI and CodeRabbit monitoring continue against the pushed head.
A frame limit only paced what reached the screen: a game without vsync
kept drawing hundreds of frames a second that were thrown away (AIO at
a 60 fps limit drew 155 to 2,446 fps), so the limit saved no power.
With Performance mode on and a frame limit set, the session now sets
gamescope's per-game limit over gamescope_control (gamescopectl
debug_set_fps_limit). gamescope's limiter then has its WSI layer hold
Vulkan games, DXVK and VKD3D included, to the limit. gamescope's own
--framerate-limit option is reset on its first frame in 3.16.29, and
Steam resets the per-game limit while it starts, so the session watches
gamescope's limiter state file and sets the limit again whenever it is
off (a once-a-second check with shell builtins, no process started).
With Performance mode off, a limit paces the screen only, as before.
The session also gives gamescope a fixed limiter state file path, so
gamescope stops leaving a new one behind on every start, and removes
the old ones.
Device-proven on the AYANEO Pocket FIT (Turnip, AIO D3D11, 45 s runs on
battery, three runs each): at a 60 fps limit the game held exactly
60.0 fps and the device drew 7.08 W instead of 9.45 W, with 1.3 instead
of 2.6 busy cores and 5 instead of 11 % GPU load. No limit: unchanged.
* feat: Show the drawer's game settings when a game starts without Steam
A session started without the client has no Steam overview to read the
current title from, so the drawer's game profile group stayed empty and the
per-game settings, FEX preset, environment and unfolded controls were hidden.
The launch already knows which game it starts, so carry its id into the
session and fall back to it when Steam has nothing to report.
* fix: Pass the game id into the service start, and keep the unfolded toggle to Steam
SessionActivity.surfaceCreated() hands the mode, program and args to
SessionService.start(), which builds the service intent. EXTRA_GAME_ID was
only put on the activity intent, so a new no-Steam session never received it
and the drawer fallback stayed empty. Pass it through.
The unfolded-controls toggle also went out for direct sessions, but
applyUnfoldedControls() still requires Steam mode and a Deck pad, neither of
which a direct session sets up. Keep the toggle to Steam.
* fix: hide Steam controls in direct session drawer
---------
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* feat: choose default storage for new store installs
Store installs and the Epic Games Launcher can use internal storage, external storage, a folder picked through Choose folder..., or ask every time. The choice is stored in SessionPrefs and used by StoreInstallRoot; Storage > Default storage exposes it.
* fix: allow choosing any folder for default storage
The default storage choice can now hold an arbitrary folder path, not just internal or app-specific external storage. StoreInstallRoot resolves and validates picked folders, keeps a disconnected choice instead of silently falling back, and the folder picker stays available from Storage.
* fix: keep the Epic install folder when external storage is away
* test: use a unique missing folder for the Epic storage check
* fix: detect USB SSDs that the storage manager hides
List storage volumes that have no UUID instead of dropping them, keep volumes that are present but not yet mounted, and fall back to parsing /proc/mounts so USB OTG drives appear even when Android does not expose them as storage volumes or app directories. Prefer the system's volume description for removable drives. (Raw removable drives as move targets, the folder-picker fallback, and the unreadable-drive guidance follow with the move stack.)
* fix: compare mount paths as strings in StorageRootsTest
* fix: never drop a present storage volume from the drive list
Key volumes by description or index when they report no UUID and no directory, keep nofs/unmountable states so a plugged-in drive stays visible with guidance, only attach app directories on strict UUID matches, and accept any fstype under vold-managed locations plus usb-ish mounts directly under /mnt.
* fix: probe folder writes with a fresh temp file and keep Epic's folder unset while external storage is away
---------
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Adds a Performance mode switch under Mode settings > Frame rate, off by default and stored per mode like the frame limit. Off keeps today's behaviour. On:
- with no frame limit, the compositor hands buffers back to the game as soon as they are replaced instead of once per refresh, and gamescope's WSI layer is asked for at least 8 swapchain images; a chosen frame limit still paces
- DROIDDECK_WSI_BYPASS_CHECK_MS=100 lets gamescope's WSI layer reuse its present-time Xwayland bypass check (patch 0117, gamescope-3.16.29-p13); WINE_OFFSCREEN_CHECK_MS=100 does the same for winex11 once a DroidDeck-Proton release carries that fix. Off sets both to 0.
The gamescope pack now ships the patched WSI layer and SessionFiles stages it over the runtime's stock copy. Two per-game options, off by default: PROTON_DXVK_D3D8 and WINE_D3D_CONFIG renderer=vulkan|gl.
AIO Graphics Test on an AYANEO Pocket FIT (Adreno 750), off -> on: Vulkan 204 -> 1787, OpenGL 296 -> 2169, D3D12 308 -> 3563, D3D11 1133 -> 2874, D3D9 1253 -> 3098 fps; DiRT Showdown 92.2 -> 93.4 (GPU-bound).
* feat: adjustable RAM and VRAM caps for the container
Performance > Memory gets two sliders:
- RAM cap (soft, Steam sessions): when the session is resident above the
cap, the session watcher compresses the Steam client into zRAM, waits for
its page-out acknowledgment, then compresses the rest of the session
(processes that loaded libblsession) if still over. Nothing is closed.
Measured at most every 30 s; the client is read back once usage drops
below the cap. Invalid values leave the cap off. Needs zRAM swap.
- VRAM cap: sets dxgi.maxDeviceMemory ahead of the game's own DXVK_CONFIG,
so Direct3D games budget for less video memory. A game profile still
wins. Applies from the next session.
* fix: back off the RAM cap when paging out cannot get under it
A cap below the game's working set was never met, so the watcher paged out
the client and the whole session every 30 s for the rest of the session.
Usage is still measured every 30 s, but after a page-out that leaves the
session over the cap the next one waits twice as long (60 s up to 10 min),
resetting once usage is under the cap. The client step is skipped while the
client is already under 512 MB resident.
* fix: RAM cap covers desktop Steam, signals each group once, no idle churn
- Steam opened from the desktop runs the same session watcher, so the cap
is exported whenever the Steam client runs, not only in Steam mode.
- The second page-out goes to the rest of the session only; Steam was
signalled again even when its own step had been skipped as already small.
- A cap page-out while no game runs stays paged out. Reading the client back
right away pushed it over the cap again and repeated every minute; only a
game closing while over the cap still defers a read-back.
* fix: RAM cap marks the client packed only when it compressed it
When the cap skipped the client as already small during a game, it still
recorded the client as packed, so the regular in-game client page-out
waited up to 300 s for a page-out that never happened.
---------
Co-authored-by: jazzyjames <182448902+jazzyjamesgames@users.noreply.github.com>
Xbox Cloud Gaming: stream from the store and Games tab, native player with DroidDeck frame generation
Stream Xbox games with Xbox Cloud Gaming (Game Pass) from DroidDeck, outside
the Linux session.
- Backend: `xodus-cli cloud-token` (tools/xbox/droiddeck-cloud-token.patch)
gets the streaming tokens; they stay in memory.
- Web player (default): the Greenlight player page (tools/xcloud-player, MIT)
in a WebView, plus Microsoft's own xbox.com/play player. In-stream menu with
screen effects (sharpen, colour, deband, FXAA, CRT, NTSC, Toon, fps cap),
stream quality, performance overlay (level, layout, top right / top left)
and rumble.
- Native player (opt-in, Android 10+, Player engine: Native): Google's WebRTC
(io.github.webrtc-sdk 125.6422.07, BSD) with the Greenlight protocol ported
to Kotlin, in its own process (:xcloudnative) with its own instance of
DroidDeck's compositor. Decoded frames reach the compositor as
AHardwareBuffers (new stream mode, VK_ANDROID_external_memory_android_
hardware_buffer import), so DDFG 2x and LSFG 2x/3x/4x run on them. Live
frame generation, frame-rate target (presets and a 10-165 fps slider, even
pacing), zero-copy picture, small network buffer, fast decoder, instant
controller input, overlay with engine and on-screen fps, background end,
restart and web fallback. It takes the main process's tokens through
XboxCloudTokenService; they are fetched ahead while a cloud game is shown.
- The compositor requests the dma-buf import extensions only where the driver
has them (the system driver has none).
- Catalog: cloud availability, Game Pass plan CFQ7TTC0K6L8 counted, library
filter All / Owned / Game Pass / Cloud, Stream and Add to Games on the store
page, stream-only Games-tab entries (Stream + Download / Play + Stream).
- Xbox games get VC++ 2015-2022 and the ARM64 runtime registry entries
(vcredist2022_arm64, built in until the catalog has it) before each launch.
- Controller focus reaches pickers opened from a game page (install location,
uninstall); Add / Remove from Games keep the focus.
Credits: Greenlight by UnknownSKL (Jim Kroon), MIT, player and protocol;
Better xCloud for the resolution / OS mapping; MGamer404's Bannerlator #627
for the ARM64 runtime approach. Ported from the412banner's Bannerlator.
The content log was read with RandomAccessFile.readLine, one byte per read, on the main thread. A 4 MB log took about 2 s on the first poll, enough for an ANR on slower devices while a download runs. It is now read through a buffered reader with the same Latin-1 lines and offset, and the per-line regexes only run on lines that can match.
Fixes#1348, fixes#1372, fixes#1388.
Since 0.6.0 the app ignores the sensor and stays in one landscape side,
even with auto-rotate on. #1287 changed the default orientation from
sensor landscape to fixed landscape, so everyone who never picked an
orientation in settings got locked.
The default is sensor landscape again. A picked orientation is still
saved and used as before.
| | Before | After |
| --- | --- | --- |
| No orientation picked | `SCREEN_ORIENTATION_LANDSCAPE`, no flip |
`SCREEN_ORIENTATION_SENSOR_LANDSCAPE`, follows the sensor |
| Orientation picked in settings | that orientation | that orientation |
Tested on REDMAGIC NP06J (Android 16) with no saved orientation:
`dumpsys activity` reports the requested orientation, and the app flips
with the device.