The Wayland compositor already carries the X11 renderer's spatial
upscalers (effects_chain.c: FSR 1 EASU+RCAS, Snapdragon GSR and its
quality variant, NIS, RCAS sharpen) behind
WaylandCompositor.nativeSetUpscaler / nativeSetUpscaleSharpness, but
nothing calls them since the Winlator-era drawer was removed, so the
scene is always enlarged to the panel with a plain linear blit.
Add "Upscaler" and "Upscaler sharpness" to the session page's Display
group (off by default, 75%), stored in SessionPrefs and applied next to
nativeSetScaleMode when the session's surface is set up. The choice is
also listed in device.txt.
* fix: carry the installed Steam build into imported games so Steam stops re-verifying them
A second-library game downloaded by WinNative was registered with a bare
manifest (no buildid or InstalledDepots), so Steam treated it as build 0 and
verified all ~92 GB of Final Fantasy XV through proot. Reuse WinNative's
.winnative-steam manifest, or a completed .DepotDownloader/depot.config, so
Steam only fetches what changed since the recorded build.
* fix: give queued Steam fresh installs of imported games the recorded build
Steam rewrites a bare import manifest into a fresh install at build 0
before downloading anything. While nothing is downloaded or staged, the
WinNative build is still safe to carry over, so Steam skips the full
re-download (FF7 Remake was queued for 98 GB this way).
* fix: mount the game storage at /mnt/droiddeck-sd
The second library was bound at /mnt/bannerlator-sd, a name left from the
Bannerlator port, which is what Steam shows in its paths and errors. Bind
it at /mnt/droiddeck-sd, keep the old path as an alias for links and
prefixes that still name it, move Steam's library entry in place, re-point
import links, read ownership snapshots taken under the old path, and key
added-game shortcut ids by the old path so their prefixes stay put.
* fix: restart Steam once when owned added games are confirmed
On a fresh install the importer runs before any ownership snapshot exists,
so every added game became a non-Steam shortcut and stayed one until the
client happened to restart. Once the watcher confirms owned titles that are
not imported, it asks the session for one restart, while no game runs and
no download is in progress, and the importer turns them into Steam entries.
* feat: pick GPU drivers as matched pairs, set automatically for the device's GPU
* DD-Turnip Driver Support (#106)
---------
Co-authored-by: MaxsTechReview <maxjividen@gmail.com>
* perf: answer Turnip's zero-timeout KGSL timestamp polls without blocking
Turnip polls a timeline point with IOCTL_KGSL_DEVICE_WAITTIMESTAMP_CTXTID
and a timeout of 0, which KGSL reads as wait forever; Mesa does it under
a lock on every signalling submit, so vkd3d-proton, DXVK, gamescope and
Zink ran in lock-step with the GPU. The session preload now answers
those polls from the context's retired timestamp and passes everything
else to the kernel. Bannerlator measured a D3D12 demo at 614 -> 4335 fps
with the same answer in its Vulkan adapter. BL_NO_KGSL_POLL_FIX=1 turns
it off.
* perf: frame limiter, live panel refresh, opt-in GPU clock pin, cheaper cursor sync
- A per-mode frame limit (Steam and desktop settings, off by default):
gamescope's -r, the compositor's buffer-release pacer, the display
layer's frame-rate vote and a panel mode the cap divides evenly, as
WinNative's per-shortcut limit does. BL_FPS was always 0 and the
pacer's limit was never set.
- The compositor follows the panel's refresh rate when it changes
mid-session instead of reporting the rate read at start. (WinNative.)
- Performance > GPU: hold the Adreno clock at its top through KGSL's
power-control property, no root (Bannerlator's PerfGpuTurbo). Off by
default; cleared when the session stops and at the next app start if
a killed process left it set.
- The cursor image is copied across JNI only when its serial changes,
not on every pointer move.
* perf: stop re-seeding every prefix every 5 s, and run the library helpers only on change
- bannerlator-seed-redists stamped its change check from a block that
carried the current time, so it never matched: every prefix had ~32
keys appended to system.reg on every beat. The stamp now comes from
the names; Proton's prefix template is seeded too (date kept), with
WinNative's built-in list until the client has the install scripts.
- The library beat runs the seeder every 15 s and steam-compat only
when a directory it reads has changed, or once a minute.
- The client-core pin reads /proc itself and runs taskset -a only for
new processes or ones that grew threads.
- The games watcher backs off after a failed ownership probe and does
not probe while a game runs.
- The Proton launcher runs the newest ARM64 depot by build number, and
PROTON_USE_PIPEWIRE defaults to 0. (WinNative.)
* perf: Mesa's database shader cache, and proot's tracer above the guest
- MESA_DISK_CACHE_DATABASE=1 for the session: the file cache opens a
file per lookup and opens and renames one per store, each a proot
stop; the database is opened once and used with pread/pwrite.
- proot's single tracer thread is raised to nice -6 (under the
compositor's -8) two seconds after it starts, so the first guest
process it forks keeps nice 0. setpriority() directly, not
Process.setThreadPriority, which would also move its cgroup.
* feat(lsfg): take Lossless Scaling from Steam by itself, import it once owned, rebuild on update
- Lossless.kt owns the DLL and its shader cache. The copy the Steam
client installs (runtime library or the card's) is taken by itself
and taken again when the client updates it (size/mtime stamp). The
DLL is copied in and built into a cache named after its SHA-256, so
a new DLL hands the compositor a new path; a build that fails keeps
the working cache. Builds are serialized.
- The Steam session asks the signed-in client once per session whether
the account owns app 993090 until the answer is yes, then records it
and the app stops asking (BL_LOSSLESS_OWNED). Once owned, the frame
generation menu offers "Import Lossless.dll…", on the main screen and
in the session drawer; an import stays until Steam's copy changes.
- The compositor restarts the LSFG engine when its cache path changes,
and a new engine selection clears an earlier start failure, so an
updated DLL or a retry no longer needs the app restarted.
- The HUD says when LSFG is waiting on Lossless Scaling instead of
"starting"; frame generation strings are resources.
- Removed LsfgNative's unused DLL variant and cache-match calls.
* Find Lossless.dll in added Games libraries too
* LSFG: 120, 90 and 60 fps targets alongside 2x-4x
The pacer's target-rate mode picks 0-3 generations per game frame. While it
is warm the input ring and shared chain follow every frame, so frames that
generate nothing don't leave the next one without history.
* Credit LSFG: Camille LaVey / Eden, ported to WinNative and DroidDeck by @maxjivi05
* LSFG: aim 0.1 fps under the target so output never passes the refresh rate
* feat: turn Deck mode on for new installs and add a performance overlay toggle
* feat: hide the session fps HUD where Deck mode's performance overlay runs
* feat: run Flatpak apps through a proot bwrap stand-in and add a Flathub store
* feat: give Flatpak apps the KGSL GPU, the controllers and a CPU LLVM can target
* feat: Flatpak games on the desktop, Store apps on the Desktop page, safer remove
* test: cover the sandbox planner and store helpers; docs: explain Flatpak on DroidDeck
* fix: keep controller focus through Store tabs and app pages; show progress per Flatpak step
* fix: let Chromium, Electron and Firefox Flatpaks start without their own sandboxes
* fix: fetch Flatpak's supporting libraries when the runtime lacks them
* fix: add Flathub without a download, log store commands, keep Electron apps on X11 under gamescope
* feat: import ARM64 AppImages from storage and run them from the Desktop page
* fix: report failed Flatpak installs as failures and deploy runtimes that ship a resolv.conf link
* fix: let Flatpak create its repo where Android denies hard links
* fix: point store commands at the current network's DNS
* fix: keep failed Flatpak extensions non-fatal, give Electron AppImages a bus, X11 and time to relaunch
* docs: AppImage import and what x86 apps would take
* feat: put the Flathub Store and AppImage import behind beta toggles in Setup
---------
Co-authored-by: MaxsTechReview <maxjividen@gmail.com>
The floppy disk beside the Steam cog and its Game saves page are gone. A game's
page now has Manage saves beside Proton prefix, a menu with Import saves (a
GameHub or Winlator zip, picked in the app's file picker; the saves there now are
backed up first), Export as GameHub zip, Export as Winlator zip (a folder picked
the same way) and Open save folder. The game's saves are looked for when the menu
opens. The Proton list and config.vdf reader only that page needed are removed.
A floppy disk beside the Steam page's cog opens a Game saves page, laid out like
Components: the Proton at the top (from the client's compatibility tools, with
bannerlator-proton-arm64 shown as Proton Experimental), the zip type beside it
(GameHub or Winlator, LB / RB turn it), and the games the client runs with that
Proton (CompatToolMapping, its default for the rest), each with Import and Export.
Import picks a zip in the app's file picker, backs up the game's steamuser profile
to Download/DroidDeck/Saves/backups, then unzips drive_c with any user folder but
Public renamed to steamuser, so GameHub and Winlator zips both land. Export finds
the save folders by name under the usual roots (Bannerlator's SaveLocator), or
takes the whole profile, and writes <Game>_<date>.zip to a folder picked the same
way, under steamuser (GameHub) or xuser (Winlator). Imports wait while a session
runs. Ported from Bannerlator's GameSaveBackup and SaveLocator.
* feat: stand in for /dev/uinput so Steam Input's virtual pads reach games
* feat: present the pad to the Steam client as a Steam Deck controller over hidraw
* docs: log the uinput stand-in and the Steam Deck controller
* feat: feed the handheld's gyro and accelerometer to the Steam Deck controller
* feat: let the Steam page choose between the Steam Deck controller and the Xbox 360 pad
* feat: Deck back grips and trackpads on the second screen
* fix: serialize ring teardown with its writers, fall back to the Xbox pad when the Deck cannot be set up, and read motion only for a Deck
* fix: keep the second screen's choice through sleep and bring it back on wake
* perf: cache pinned downloads, skip unchanged proot rebuilds, and wait out a Docker Desktop restart in the local build
* perf: skip xalia and gamescope realtime queues by default, add a realtime toggle, default the mic off
* fix: show the saved Steam Deck mode on the Steam page before Performance has been opened
A replaced buffer went straight back to a game with no frame limit, so a
MAILBOX/IMMEDIATE swapchain drew frames that were never shown; it now
comes back once per refresh as in WinNative. gamescope's -r and the
compositor read the rate of the mode the activity asked for rather than
the one the panel was still in, and the zero-copy layer votes it.
Sustained performance mode, which caps clocks on most power HALs, and
the ADPF session, which reported frame intervals as work, are gone.
* Add ownership-aware Steam game folder imports
* Fix Steam title lookup and installed game manifests
---------
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
0.2.0 hardcodes the proot utsname nodename to "DroidDeck". Steam sends
it as the machine name, so an install updated from an earlier build
(which reported Android's "localhost") shows up in Steam under a new
name, with the same machine-id and login. /etc/hostname cannot fix it
from inside: proot's -k override wins.
Add a "Host name" field (Performance > Session identity), stored in
SessionPrefs and passed to guestUtsname(). Only a valid RFC 1123 label
is saved; blank or invalid falls back to the old default, "DroidDeck",
so nothing changes for anyone who leaves it alone. The value is also
listed in device.txt.
The Quick Access menu's performance overlay toggle and level slider stayed
greyed out: the client exposes SteamClient.System.Perf only with -steamos3,
which SteamOS and Armada pass alongside -steamdeck. Deck mode now launches the
client with both. The session already puts package/beta back to the forced
branch before every start, which keeps -steamos3's own branch switch from
turning into an update loop.
The Deck mode switch moves from the Performance page to the Steam page's
Client settings, next to the client branch it selects by default.
* docs(release): draft 0.2.0 beta notes
* docs(release): credit prs and authors in 0.2.0 notes
* docs(release): add #39 and #45 to 0.2.0 notes
* chore: update readme
* fix(ui): cover the whole screen with the capsule wall
The wall was shifted right and then tilted around its own centre, which
left the bottom-left of the home and loading screens bare. Centre it and
size it to the tilted page's bounding box so every corner stays covered.
* feat(ui): flood from the play button into the throbber
Starting a session from a blue button no longer slides the session up
over the front end. The button stretches out on staggered springs until
the page is the ball's blue, the session opens on that same blue with no
window animation, and the blue gathers into the throbber's ball before
the throbber starts. Re-joining a running session, tiles and reduced
motion keep the old rise.
* docs(release): cover everything since 0.1 in the 0.2.0 notes
0.2.0 is the first release from the org, so list what DroidDeck does
as a whole, grouped by area: org pull requests as #N, pull requests
from before the move as The412Banner/DroidDeck#N, and the early work
that predates pull requests by author. CI and build work gets one
short section instead of a line each.
* docs(release): add screenshots and animations to the 0.2.0 notes
Lead with a game running and a few visual highlights, fold the full
list into collapsible sections by area, and shorten every line to the
feature and its credit. Pre-move pull requests read as legacy#N.
* fix(session): give the desktop its own loading hints
The loading screen's hints were written for Steam, so starting the
desktop or an emulator said the first run downloads Steam and that
leaving the app pauses Steam. Desktop and program sessions now rotate
through hints about the desktop instead.
* fix(build): skip incomplete NDKs when picking one locally
An interrupted sdkmanager install leaves a directory like
28.2.13676358.failed under ndk/, which sorted last and was picked
without a toolchain in it. Only consider directories that carry
source.properties.
* docs(release): show launching straight into Big Picture
* docs(release): credit the launch transition to #46
Twice today a session's Xwayland aborted from one thread ("The futex
facility returned an unexpected error code"), proot lost the tracee, and
the process lived on reparented to init: proot's seccomp filter, with no
tracer left, answers ENOSYS, so Xwayland's main loop logged
"WaitForSomething(): poll: Function not implemented" until something killed
it - 9 GB after Dolphin, 13 GB after PPSSPP. --kill-on-exit and the tree
sweep only reach what proot still traces, and the straggler sweep ran only
at the next session's start.
Now a session stop also kills every process of ours whose executable lives
in the Linux runtime, and bannerlator-session keeps only the first
BL_LOG_CAP bytes (256 MB) of session.log, draining the rest so a writer
that filled it is not killed by SIGPIPE.
Steam runs its graphics probe through every registered Proton at once after login, all in
compatdata/0. Prefix system32 links point into the Proton that set it up last, and the other
Protons' Wines, running outside Proton's pfx.lock, wrote their builtin DLLs through them into that
Proton's tree (device: GE's FEX DLLs became Proton Experimental's at session start).
- bannerlator-steam-compat: both wrappers (Valve's depot launcher and the third-party
bannerlator-proton-wrap) give a tool-0 run STEAM_COMPAT_DATA_PATH=.../compatdata/0-<tool>, and
before every other launch check the Proton's files against the app's desired.tsv and put back
anything that differs (same Proton build only), logging to reapplied.log.
- ComponentsManager writes desired.tsv plus unpacked copies of the packages in use into the
runtime after every change; the page and the drawer show 're-applied at launch'.
A Components entry under Desktop opens a page built like the driver pages: a
Proton drop-down, FEX / DXVK / VKD3D-Proton tabs, what is in use, the installed
rows (each Proton build's original bundle and the stored packages; tap to
swap in, trash to delete), downloads from the Nightlies -Linux releases behind
the refresh button, and Import .wcp.
The session drawer gets a fourth tab, Components, for quick swaps between
what is installed. A swap into the Proton a running game uses waits until the
game closes and is applied then (drawer refresh, or the main screen on resume).
ComponentsManager keeps the same package format, originals layout and state as
the Decky Components Manager plugin and takes its data over once. A swap clears
only the component's own DLLs, so files a Proton keeps beside them stay.
The client's UI log names the signed-in account on every login change ("Login:
OnLoginStateChange <account> ...", "OnLoginUsersChanged <account>"), ~200 lines on one device.
An email account was caught by the email rule; a plain account name was not, so a user signing in
with one had it in every shared log. Those two lines now lose the account, and every
AccountName and PersonaName in the client's loginusers.vdf is learned (with the device's own
addresses, learnFromRuntime) and replaced wherever it appears. The one-time pass over older
folders runs again for this (marker .scrubbed-2).
A privacy pass over the session folders found three leaks:
- the Steam client's IPv6 check logs "external address <the device's public IPv6>" about
twenty times a session, and the redactor kept IP addresses on purpose, so steam/
connection_log.txt carried it;
- network.txt listed the device's addresses (public IPv6 included) and the session's made-up
MAC, which is seeded from ANDROID_ID and so stable per device;
- session.log, app.log, desktop.log, steam-desktop.log, crash.log were never scrubbed (clean on
device, by luck).
The redactor now learns the device's own addresses from the session's link file (a global IPv6
as its /64, a public IPv4 exactly) and removes them wherever they appear, along with anything
logged as an "external address"; Valve's server addresses stay. network.txt gives every address
as its kind ("<public IPv6>") and masks the MAC. Every text file in a session folder goes
through the redactor when the session ends (killed sessions at the next app start), and again on
its way into the share-logs zip. Folders written before this are scrubbed once at app start.