The component catalog also reads the linux-nightly release of
Droid-Deck/DroidDeck-Components (hourly builds of DXVK, VKD3D-Proton and
FEX for glibc Protons). That release holds all three components, so each
file goes to its list by name: DD-dxvk-, DD-vkd3d-proton-, DD-FEXCore-.
A nightly that matches a stable build (same flavor and version, e.g.
DD-dxvk-3.1.1+153-nightly and dxvk-3.1.1-linux) has no row of its own;
if two nightlies match, the newer one is used. On the components page
the stable row gets a Stable | Nightly switch before Get, styled like
the Get button, one focus stop that flips with A or a tap and reports
its state as a switch. In the in-session drawer's download menus the
row gets Stable and Nightly tabs beside it (the existing TabStrip, now
with optional bumpers/compact), each its own focus stop. Get or A on the
row downloads whichever channel is selected. A nightly without a stable
counterpart keeps its own row, listed below the stable ones.
Downloads are allowed from that repository's releases too. A failed
nightly download says the file may have been replaced and asks for a
refresh. Strings in all locales.
* fix: stop the DirectAudio output while the sink is suspended
* fix: verify every session thread before reporting suspension
* fix: freeze PRoot first and stop each guest thread on suspend
---------
Co-authored-by: Detinator10 <8469261+Detinator10@users.noreply.github.com>
A user app (script, AppImage or Flatpak) started from its shortcut runs in
a Run session, which took the Steam resolution (720p by default). It
ignored the resolution chosen under Open Desktop and was letterboxed at
1280x720 on screens that are not 16:9.
User apps now use the Desktop's resolution once one has been chosen. Until
then, and for every other Run program, nothing changes.
FEX builds can reach devices without an app release: while the x86-64
client is selected the app reads DroidDeck-Components' fex.json (directly,
on its own thread, not in Offline Mode) and a session passes that build to
droiddeck-steam-x64, which installs it only once its sha256 matches and its
programs load, keeping the replaced files aside until the installed copy
loads too; it keeps a working installed build otherwise and falls back to
the build it pins. FEX is built and published by Components' build-fex.yml
on its single fex release; this repository's build-fex.yml only checks the
build. x86-64 session logs name the FEX build and its source, the rootfs and
the client's builds, report the rootfs download in tenths, and say in one
line when the web helper's GPU process keeps exiting, with x86 glxinfo and
vulkaninfo through FEX. Settings shows the FEX build installed.
An opt-in second Steam client (Steam settings, Steam client: x86-64): Valve's
x86-64 Linux client, unchanged, runs under FEX in its own home with its own
game library and the same sign-in. Linux builds run directly, so titles such
as Team Fortress 2 and Half-Life use their Linux versions; Windows games use
DroidDeck-Proton as on arm64. The arm64 client stays the default.
- droiddeck-steam-x64: FEX and the x86-64 rootfs from DroidDeck-Components
(sha256-pinned), client install and sync from Valve's CDN, sign-in shared
with the arm64 client, its web helper on the GPU (ANGLE GL over FEX's GL
thunk, zink, Turnip), Proton wrappers for the arm64 client's tools,
DroidDeck direct for Linux builds, SD-card library (x86-64/ beside the
arm64 one), repair.
- FEX 2610 built by build-fex.yml with thunks and three patches: an openat2
fallback without openat2 (proot), newer-clang thunkgen, MAP_32BIT
exhaustion returning ENOMEM. libblsession resolves RESOLVE_IN_ROOT paths
inside the root.
- Session: x86-64 gating, shortcuts and compatibility tools per client,
logs from the client that ran.
- App: client setting with the FEX version, an x86-64 chip on the Games
header, the active client's library, art, storage, downloads, repair,
Offline Mode, Decky, desktop mode, optional VAC diagnostics; per-client
state for art, the content log, repair and leftovers.
- Strings in every locale.
- Review fixes: the library cache is saved only by the newest scan; an
abandoned session's Steam logs come from the client it recorded; distinct
VAC console names; FEXInterpreter in CPU pinning; clearer VAC hint in
pl, ru, uk, cs and bg.
* feat: Epic Games Launcher for Linux
Install Epic's official Linux launcher (EGLv2) from Epic's CDN with Valve's
Steam Runtime 4 and run it under FEX, signed in with the linked Epic account.
Epic games launch through a hidden launcher instance so they get the
launcher's own arguments, with the exchange-code launch as the fallback, and
DroidDeck installs show up in the launcher as installed.
In the launcher, touch scrolls like a phone app and the gamepad drives the UI:
D-pad and left stick move the selection, A opens, B goes back, the right stick
and triggers scroll proportionally, X opens the options menu, Y the keyboard
and LB/RB switch tabs.
* feat: Epic Games Launcher for Linux
Install Epic's official Linux launcher (EGLv2) from Epic's CDN with Valve's
Steam Runtime 4 and run it under FEX, signed in with the linked Epic account.
Epic games launch through a hidden launcher instance so they get the
launcher's own arguments, with the exchange-code launch as the fallback, and
DroidDeck installs show up in the launcher as installed.
In the launcher, touch scrolls like a phone app and the gamepad drives the UI:
D-pad and left stick move the selection, A opens, B goes back, the right stick
and triggers scroll proportionally, X opens the options menu, Y the keyboard
and LB/RB switch tabs.
* Route Epic games through Steam, import launcher installs, offer the second library
- Every Epic launch goes Steam -> Epic Games Launcher -> game; Play inside the open launcher hands the game to Steam
- Games installed from inside the launcher get a Games-tab entry and launch through Steam; the launcher installs to the last Stores target
- Stores install picker offers the Steam second library, with side-by-side choices
- uruntime xattr-only failures no longer fail the launcher unpack (app-extract)
* Hand launcher Play and Steam links to Steam, wait for FEX on first run
Play on a game the launcher just installed is matched to its install
record and handed to Steam. Steam games listed in the launcher open
steam://rungameid links, which now start the game in a Steam session.
Opening the launcher before Steam has downloaded FEX asks Steam for it
and starts Steam instead of failing with no-fex.
* Address review: FEX check, play-in-Steam action, touch route thread, scroll scale
fexReady needs a FEX binary in Steam's FEX tool, not just its folder.
The play-in-Steam action stays until the link is handled, so Run Steam
at startup can't start a session first. The pad touch route reads the
mouse mode without side effects off the main thread and posts the pad
update there. Vertical scroll uses the output height. A status-2 unpack
counts only when AppRun is there. The xdg-open command is tested
end to end for Steam links.
* Open the launcher through Steam, recover dropped shortcuts, sign out of both
The Epic Games Launcher now runs as its own Steam shortcut, so opening
it starts Steam, which opens the launcher, and Play inside it goes to
the running Steam.
Steam dropped a running shortcut from its library when the game exited
after a sleep/wake replay or a server re-logon, and launching it then
waited forever at ShowInterstitials. login1 only replays sleep/wake
when Steam is asleep. The session restarts Steam when a requested
shortcut is missing, and when a game exits with its shortcut gone and
nothing else runs.
Resuming after a long pause no longer reports failure while traced
processes are still waking, so "Steam is paused" goes away on the first
tap.
Signing out of the launcher signs DroidDeck's Epic store out, and
signing out in DroidDeck restarts the launcher signed out and clears
the Epic web cookies.
* Address review: one session-switch poll, Epic setup can't block a session
A new switch confirmation replaces the pending poll instead of adding a
second one that could start the session again. Epic library sync and
install-folder setup at session start are each guarded, so a bad
preference no longer stops the guest from launching.
* Uninstall the Epic Games Launcher from the Games tab
An Uninstall button next to Launch asks first, closes a running
session, and removes the launcher and its runtime. The launcher's
sign-in and install records stay, so its games keep their Games-tab
entries and a reinstall comes back signed in. Its Steam shortcut goes
away on the next Steam start.
* Address review: uninstall only after the session has ended
The launcher's files are removed only once the session is not running
and its phase has ended; a shutdown still in progress after the wait
reports failure instead. The confirmation reads the session state from
the front-end state.
* Find FEX that Steam installed on the second library
Steam's tools on a second library live in DroidDeck's private copy,
which the session binds over the library. The launcher's FEX check
only looked on the shared storage, so with FEX there it always asked
Steam for FEX and only Steam opened. It now checks the private copy
too.
* Start games without Steam, per-game Settings menu with Wine sync
"Start without Steam" now really leaves the Steam client out: the game
runs in its own Proton/FEX through droiddeck-proton-run in a run
session, and the Epic Games Launcher opens on its own with its games
playing in it. Run sessions for these games are not pinned to the big
cores and get DirectAudio and the added-games list like Steam.
The Games tab card is now "Settings", titled "<game> Settings": Start
without Steam, FEX preset, Wine sync (ntsync, fsync, esync, wineserver
or the app default) and Default, which puts everything changed for the
game back to the app's settings. The app-wide Wine sync choice is shown
in the Steam settings Session tab.
* Address review: uninstall guard, routed games, shortcut matching
Opening or reinstalling the Epic Games Launcher waits while it is being
uninstalled. Added games that are Steam installs keep their Start
without Steam setting under their Steam app id and start as that Steam
game. Live shortcut lookups wait for Steam's library to load and match
a same-name shortcut by its executable, so no duplicate is added. The
session treats the open launcher as itself even when it could not tell
its Steam app id.
* Address review: drop a queued launcher switch when it is uninstalled
A confirmed switch to the Epic Games Launcher that is still waiting for
the old session to end is cancelled when the launcher is uninstalled,
and never starts while the uninstall runs. The launcher id test sets
its environment for its own runs only.
* Add VITURE glasses support: hardware control, 3D, head tracking
Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.
* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs
* Hang the glasses Settings lip over the top of the button
* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses
* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top
* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad
* Let the pad hands reach a metre out so buttons with deep colliders press
* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters
* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad
* Glasses: SteamVR field of view defaults to 90°
* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand
* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's
* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam
* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end
* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs
* Harden VITURE stereo negotiation and output refresh tracking
* Localize stereo recovery feedback and record Astra reconnect tests
* Improve test failure diagnostics and refresh Astra firmware findings
* Handle VITURE docks separately and reject truncated USB frames
* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes
- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
model, so Play SteamVR no longer blacks out the glasses after every restart;
Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
retries a failed first swapchain
- Dead strings and helpers removed; docs updated
* Glasses: drop USB frames with a bad checksum
* Glasses: count frames dropped for a bad checksum
* Feat/viture xr (#907)
* Add RayNeo Air and GT support to the XR glasses pipeline
* Add RayNeo Air and GT support to the XR glasses pipeline
* Checkpoint glasses tracking, calibration, and SteamVR launch integration
* Checkpoint glasses tracking, calibration, and SteamVR launch integration
* Add XREAL 1S support and correct GT and Pro 2 tracking
* Add XREAL 1S support and correct GT and Pro 2 tracking
* Fix mirrored glasses tracking and recover SteamVR after device loss
* Fix mirrored glasses tracking and recover SteamVR after device loss
* Document confirmed XREAL 1S brightness control
* Document confirmed XREAL 1S brightness control
* Fix SteamVR glasses defaults and rendering controls
* Fix SteamVR glasses defaults and rendering controls
* chore: keep only the 3 newest session log folders (#852)
* chore: add agent comment rules (#748)
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* Fix SteamVR polling, VITURE checksums, and fence tracking
Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.
Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.
* Fix SteamVR polling, VITURE checksums, and fence tracking
Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.
Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.
* fix: wireless ADB page names the child-process switch the way Android shows it (#848)
* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)
* l10n: refresh stale and untranslated strings in es, fr, ko, ru
- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.
Machine-assisted translation; native-speaker review is welcome.
* l10n(es): say registro, not grabación, for the missing installer record
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* fix: a failed cloud save recovery no longer ends the app (#846)
The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
* fix: an interrupted Linux runtime download resumes instead of starting again (#847)
* fix: an interrupted Linux runtime download resumes instead of starting again
installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.
* test: Downloader resumes a cut-off download from the bytes it kept
Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.
* fix: a resumed download discards a 206 that does not start where the kept bytes end
Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.
Adds a test with a server that answers the Range request from offset 0.
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)
* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings
Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.
* l10n: correct missing active swap translations
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)
fix: droiddeckctl reaches builds shipped under a variant package
The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)
feat: droiddeckctl pacing reports the frames that reached the screen
Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
* fix: Steam can restart more than twice in a session (#754)
* fix: Steam can restart more than twice in a session
Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.
* fix: measure the client's run time as it exits
The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.
---------
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* fix: the front end keeps its page when the Fold is folded or unfolded (#832)
* fix: the front end keeps its page when the Fold is folded or unfolded
MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.
* fix: store login keeps rebuilding its toolbar when the display density changes
StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* Release pointer buttons without replaying stale motion (#803)
* Fix cursor warping on native touch down
* Preserve input cleanup without replaying stale pointer motion
---------
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)
* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)
The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).
Also fix four Hong Kong strings that kept the simplified 着色器.
* l10n(zh): fix stale and ambiguous strings found in review
Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.
Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.
* l10n(ja): fix stale and ambiguous strings found in review
---------
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* Rebuild and verify Windows VR runtime components
* Rebuild and verify Windows VR runtime components
* Add top, bottom, and centered picture positions for Steam sessions (#871)
* fix: dependency scan ignores folders above the game folder (#859)
* DroidDeck-Proton: get releases from the Droid-Deck org repo
DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.
* feat: low-latency controller and touch toggles in the session drawer (#808)
* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)
* feat: Steam home wall fills from the signed-in library instead of store picks (#878)
* test: cover GPU family and support classification (#880)
* Fix local builds on Linux failing after the first Comet build (#866)
* feat: sort the store library and installed tabs, and switch between card and list views (#798)
* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)
* fix: keep Quest-patched Turnip as the auto default (#853)
* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)
* fix: keep proot sessions alive when the kernel loses fork events (#457)
* fix(quest): correct desktop and Steam display corruption across sessions (#733)
fix(quest): stabilize desktop and Steam layer presentation
Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.
Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* fix: keep SteamVR syscall hooks and report Steam crashes (#905)
* fix: preserve SteamVR syscall hooks
* fix: report Steam crashes through gamescope
* fix: honor glasses pacing and resolution in SteamVR launches
---------
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture
* Translate the glasses calibration, XREAL and SteamVR recovery strings
* SteamVR recovery: give a finished teardown time to collect logs before restarting
* Credit the projects the XR glasses support builds on
* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise
* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected
* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves
- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver
---------
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.
fix: build and test on Windows
- .gitattributes keeps the session's scripts LF under core.autocrlf=true;
CRLF scripts made every session exit with status 2.
- runtime_inputs.py and the scrub record / log zip use '/' in relative
paths, which Windows reported with '\' (runtime inputs never matched).
- The read-only-folder scrub test is skipped on Windows, which still
creates files in a read-only directory.
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* Add translations for 23 more languages and fill missing strings
* Translate the strings added in main into every language
Cardboard VR and the session drawer's component downloads in all 31
languages, the game details facts and HowLongToBeat labels in the 23 new
ones, and the reworded Components page note there.
A game that closes as soon as it starts can be tripped by Proton's Steam
setup (steam.exe, the Steam registry entries, the Steam client bridge).
The Games page of the session drawer gets a per-game Start without Steam
switch, stored as DROIDDECK_NO_STEAM=1 in the game's environment and listed
in its profile summary.
droiddeck-game-env acts on it for a game launch only: a Proton with umu's
launch (GE-Proton, Proton-CachyOS, DroidDeck-Proton) gets UMU_ID, so it
runs umu.exe in place of steam.exe and still sets up the prefix; a Steam
game keeps its protonfixes under its own id, an added game gets 0. Any
other Proton runs the game straight in the prefix (runinprefix).
* feat(profiles): add persistent per-game compatibility profiles
* fix(profiles): show Windows component overrides
Include per-game Windows component selections in the resolved profile summary so the session overlay marks those games as custom and shows the selected components.
* fix(session): detect Proton games across runtime paths
* fix(profiles): select the active Gamescope game
* fix(profiles): improve per-game reset feedback
* fix(profiles): align session components with game overrides
* fix(session): prefer selected Steam game during refresh
* fix(session): resume profile following when reopening games
* chore: keep local dev testing outside the repository
* test(session): remove local dev package path
* fix(session): preserve profiles when refresh fails
* fix(session): reject empty game profile reset scope
* perf(session): cache drawer inventory by refresh revision
* fix(profiles): align game presets and profile reset behavior
* fix(profiles): preserve originals and normalize shortcut ids
* fix(profiles): keep editor scope stable after rebase
* fix(tests): host Compose tests in both build variants
* fix(profiles): recover interrupted component selection saves
---------
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Setup > Proton versions lists DroidDeck-Proton (The412Banner/DroidDeck-Proton) beside
GE-Proton and proton-cachyos: same aarch64 tarball pattern as GE, verified against its
sha512 file, installed by droiddeck-proton-extra (also as "droiddeck" in the session queue)
and adopted by steam-compatibility like any other extra, so it shows as
"DroidDeck-Proton <ver> (Compatible)". Its folder has a space; nothing in the install,
adopt, esync or components paths splits on it.
Update checks: each source's newest full release is looked up at app start and when the
page opens, at most every 6 h (offline keeps the last answer). A newer release shows
"Update available -> <tag>" with Update; it installs beside the old build, which stays
until removed ("Remove old ... versions"), since games are mapped to it by name.
Installed builds are ordered by their version numbers (11-9 before 11-10), not by name,
and the tag each was installed from is recorded. Prereleases and drafts are skipped.
The Windows components catalog, the desktop and emulator packages, the Linux runtime and the
Steam seed now live on the organisation's components repository, mirrored and built there by
CI; the app reads the catalogs from its main and the files from its releases. The personal
winlator-contents mirror keeps serving older app versions and Bannerlator.
Games folders saved before the settings section went away were still
registered as Steam libraries on Automatic, with no way left to remove
them. Once, at app start and before any scan, each game such a folder
listed becomes an entry of its own, keeping everything keyed by its folder
(chosen exe, shortcut appid, name, Start in, launch options, art,
removal); store installs and steamapps are skipped. The folders stay bound
at their old guest paths, so no shortcut changes, and the saved roots are
cleared. A Games folder stays a library only when Steam installed a game
into it; the others leave the library list, and the runtime forgets them.
Its files sit in a container no extractor opens and may not be hosted, so a recording cannot
source them; installing it means running the installer in the prefix, which no runtime here
does. With it gone the waiting section is empty.
* Windows components: hide Vulkan RT, whose loader every Proton here ships
vulkan-1.dll is in lib/wine/x86_64-windows and i386-windows of Proton Experimental (ARM64),
GE-Proton and proton-cachyos alike, so the catalog's VulkanRT entry would only shadow it. It
joins the list the page leaves out.
* Windows components: the waiting section says what is really missing (a recording), not 'coming next'
* Windows components: leave out the IE8 security update, which patches a browser no prefix has
* Windows components: the waiting caption without an apostrophe the resource compiler rejects
Proton Experimental (ARM64), GE-Proton and proton-cachyos all carry Malgun, MS Gothic, YaHei
and SimSun in share/fonts and Wine's PowerShell wrapper, so the catalog's cjkfonts and
powershell entries would only shadow what is already there. They join gecko and mono in the
list the page leaves out.
* Windows components: install from a recording of the installer's result
A catalog entry may name a 'snapshot': what its own setup program leaves in a prefix,
recorded once in Wine by winlator-contents' tools/snapshot/record.py (the files it places and
the registry values it writes, the self-registering DLLs' CLSID entries included). With one,
the setup program never runs here: the files come from the archive beside the recording, or
out of the vendor's installer by the paths the recording maps (small generated ones inline),
and the registry values go to registry.json for droiddeck-wincomponents to write at launch.
The steps a recording makes redundant are skipped; DLL overrides still apply. A component
with a recording counts as installable; its prerequisites must still be.
* droiddeck-msi-install --unpack: open archives nested inside an installer
QuickTime's cabinets and an NSIS pack's payloads sit inside the unpacked installer; they are
opened in place into '<name>.nested' folders, two levels deep, the same layout the component
recordings map their file sources to, so a recording's paths resolve on the device (QuickTime:
593 of 593).
* feat: Steam's touch controller as on-screen controls (beta)
* fix: Steam touch controls appear once the session makes the device; tidier default layout
* fix: Steam touch layout decoding, saved layouts and new sessions
* docs: Steam's touch controls
* feat: Steam's touch icons, labels and colours on the touch controls; pick and save them like Steam
* feat: Steam touch icon picker as in-session panels; layout colour; docs
* Give each physical controller its own player slot
Every controller fed the one exported pad, so two pads played as one.
The first controller keeps slot 0 (the Deck in a Steam session); further
ones get slots 1-3 as separate Xbox 360 pads, created on first input and
removed on disconnect. In Deck mode only the Steam client sees those
pads and hands them to games through Steam Input. Rumble follows the
slot it names.
* feat: Steam Link's touch menu, per-game input modes, action set editing, add/copy/paste, oval controls, paste control
* feat: Steam touch controls drawn as Steam Link draws them; Steam Link's touch menu and layout tray
* feat: Steam touch controls in DroidDeck's style, D-mark guide button, shake to hide
* refactor: Steam touch controls become an On-screen controls choice instead of a second dropdown
---------
Co-authored-by: maxjivi05 <maxjividen@gmail.com>
Session folders, tool and installer logs and the stores' log now all live under the
app's private files/logs instead of Download/DroidDeck, and every existing "Share
logs" action bundles them into one zip that goes through a final scrub.
- Where: LinuxRuntime.logDir() = files/logs; sessions keep their dated folders and
30-session pruning, tools/ and stores/ beside them. The "Logs" setting keeps its
meaning. Game save backups stay in Download/DroidDeck/Saves.
- Migration: at first start the old session folders, tools/ and loose logs move from
Download/DroidDeck into files/logs (Saves untouched), and every moved folder is
scrubbed under the current rules.
- Scrubbing: one rule set (SecretScrub) for the stores' log and the zip. The scrub
marker carries the rules version, so a rules change re-scrubs every folder at the
next start (in the background, a few at a time). Steam login account names and
emails, account-name fields, OAuth codes, tokens in URLs and private LAN
addresses are removed; Windows exception codes and server addresses are kept.
- Share: one zip of the current session folder plus the last 7 days of stores/ and
tools/, written to cache/share and handed to the share sheet.