The native arm64 client follows steamdeck_publicbeta, so a Valve beta
regression reaches every user at once. If the repaired beta client is still
started twice without being shown, or the beta manifest carries no arm64
client, droiddeck-steam-install now installs steamdeck_stable, keeps it, and
logs why (listing the manifest's blocks in the second case). The session asks
the installer for the channel, so -clientbeta and package/beta stay in sync.
BL_STEAM_CHANNEL or ~/.config/droiddeck/steam-channel (beta|stable) pins it.
Valve's 2026-10-15 beta moved the x86 client into a Steam Runtime container.
In case the arm64 client follows, its session now exports
STEAM_STEAMRT_RECURSION_GUARD=1 and, only if steamrtarm64 carries pv-runtime
or a steam-runtime-check-requirements probe, starts it through the same
steamrt shim the x86-64 client uses (now droiddeck-steamrt-shim) and logs it.
Review: a game the client briefly refused lost its games_applied record, so its
unchanged request later looked new and overwrote the Steam pick; it now keeps
what was applied before. When the app rewrote games.json during both tries,
the stale second read was applied; that pass now applies no per-game choice
and keeps the record.
A game's tool can be chosen in DroidDeck (per-game Proton) and in Steam's
game properties. When they disagreed, DroidDeck always put its own choice
back: the live helper within a second of the change, and again at every
session start. Resetting the game's DroidDeck profile made it worse - it
saved "use the default" (null), which was then forced onto the game.
A DroidDeck choice is now applied once, and the client's later pick stands:
a pick of one of DroidDeck's Protons becomes the DroidDeck choice too, any
other pick (FEX, a Steam Linux Runtime, clearing the forced tool) ends it.
"Use the default" and a profile reset are applied once and then dropped, so
the game follows the default like one DroidDeck never touched. What was
applied is kept in state.json (games_applied); choices an earlier build
already applied count as applied. games.json is rewritten only if the app
did not replace it meanwhile. An x86-only Proton picked in Steam is still
replaced, since it cannot start on the phone.
PipeWire's access module checks each client's /proc/<pid>/root for a
Flatpak marker. Where that lookup fails under proot (seen on a nubia
NX809J), PipeWire treats the client as sandboxed and holds it until the
session manager grants permissions, and WirePlumber, itself held, never
does. gamescope then waits forever for its capture stream and never
starts Steam: a black screen until the session is closed.
The session's PipeWire now gives both of its sockets unrestricted access
and WirePlumber keeps those clients at full permissions, so nothing
depends on that lookup.
The == STEP lines in session.log now read HH:MM:SS.mmm, so the setup
steps before Steam starts can be timed; with whole seconds most of them
showed the same time.
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* Run FEX-tool games on the chosen game cores
Performance > Game cores reached only the Proton launchers: games started
through "Linux x86 (FEX)" ran on every core, including the slowest cluster.
* Test that SteamVR FEX launches keep the game cores
A process's status read for another process is served read-only, so
Chromium's ReadOnlyFile check no longer kills the browser. Chromium-based
AppImages without chrome-sandbox get --no-sandbox, and Flathub Chromium and
Electron apps skip zypak's spawn portal, which cannot work here.
* feat: run SteamOS PipeWire and WirePlumber for gamescope screen capture
* feat: hardware Remote Play encoding through MediaCodec behind Steam's V4L2 stage
* feat: deliver Remote Play touches to gamescope as touches
* feat: route game audio through PulseAudio while a Remote Play client is connected
* fix: keep the Remote Play marker when a forked child closes the encoder
* fix: allow standalone preload tests without V4L2 encoder hook
FEX launched through a script (Valve's _v2-entry-point) was judged 32-bit, so the
fast path stayed off in the FEX client while FEXServer bound its socket through it.
The fast path now follows #! lines before judging the program.
The live compat sync drops apps the client refuses GetCompatTools for instead of
reattaching forever.
Flatpak starts bwrap with an empty environment, so the bwrap shim lost DROIDDECK_BWRAP_SOCKET and dialled the default package's socket. The session now writes the socket name to /etc/droiddeck/bwrap-socket and the shim reads it when the variable is missing.
Fixes#1092
Games launched from Steam get Turnip's own per-render-pass choice between
tile memory and system memory again; TU_DEBUG=sysmem now stays with the
Steam client, whose interface it was set for. A per-game TU_DEBUG, the
debug override file and the Adreno 710/720 driver still win. On the
REDMAGIC tablet (Adreno 840) PEAK runs 46.8 -> 52.3 fps over 7 alternating
pairs and Valheim's 3D menu needs 12.6 % less GPU time per frame; light
games are unchanged.
droiddeck-seed-redists remembers the identity (inode, size, mtime) of each
prefix registry it has verified and skips re-reading it while it is
unchanged. Steam started after it on every session, ~1.8 s later.
SessionFiles keeps a ledger of the files it staged for the installed APK
and copies only the ones that changed, ~180 ms less per session start.
Session start to Steam ready: 5.57 -> 3.57 s.
RPCS3's AppImage could not start: its own runtime unpacks the image with
a dwarfsextract it runs from a memfd, which Android refuses (EACCES), and
it has no other way to run it. Emulator AppImages for arm64 now start
through the shipped uruntime, which falls back to a file in /tmp.
RPCS3 then stopped with "Null object" in utils::shm (errno 13): it reads
/proc/sys/vm/overcommit_memory to pick memfd for guest memory, and apps
cannot read it. The guest now gets the kernel's default policy (0) there
when the real file is unreadable, like file-max.
A GOG download only places the files, so games that look up their own registry keys (Fallout: New Vegas reads HKLM\Software\Bethesda Softworks\FalloutNV "Installed Path") said they were not installed. Every GOG launch now reads the setRegistry actions of the game's goggame-<id>.script and imports them into the prefix's 32-bit view through Proton's reg.exe, once per change of the script, so games already downloaded are fixed on their next launch.
* Restrict Xbox credentials to host backends and lease game launches
* Verify mapped PRoot backend images and retry lease heartbeat timeouts
* Bound Xbox backend shutdown and isolate service socket lifetimes
* Keep unique Xbox service sockets within Unix address limits
* Own licensed launch directories and recover abandoned views safely
* Serialize Xbox account revocation with sign-in commits and launch authorization
* Steam x86-64 client: menus come up, sign-in stays put, games listed once
Switching the Steam client from arm64 to x86-64 left the client on a blank
screen behind "Downloading the Steam client update 100%", and each switch
signed one of the clients out.
- The x86-64 client is Valve's steamrt64 platform, but it was installed and
synced from the ubuntu12 manifest, which lags it (1792108788 against
1792192922). The client was therefore never the arm64 client's build, the
arm64 web helper was never used, and the client then updated itself in
place after the helper had been chosen. Install, sync and the build check
now read the steamrt64 manifest.
- The x86 web helper's GPU process loads libpci, which exits when
/sys/bus/pci/devices lists a device whose files the app may not read (a
RedMagic's PCIe root ports). Every GPU process exited with status 1, even
in software, until Chromium gave up and the menus stayed blank. An empty
folder is bound over /sys/bus/pci/devices on such devices.
- Steam refuses one client's login token from the other ("Invalid
Password" for a token the arm64 client signed in with minutes before), so
copying the newer token at every start signed the other client out. Each
client now keeps its own token; a client with no accounts only gets the
other's account list.
- Games could be listed twice: an added game whose folder a Steam import
already covers is now shown as that Steam game only, a client switch
drops the old client's imported entries, an import stays one when its
ownership cannot be confirmed instead of gaining a shortcut beside it,
and only the client's own library folders count as an install.
* Steam x86-64 client: share the arm64 sign-in again
The x86-64 client refused the arm64 client's login token because it did
not know the account's SteamID: it takes it from Accounts in
config/config.vdf, which this script creates without one. It logged on as
[U:1:0] with a valid token, Steam answered "Invalid Password", and the
client dropped the token and AutoLoginUser, so every switch asked for the
password.
The newer sign-in is copied between the clients again, each start adds
the accounts either client knows to the other's config.vdf, and an
AutoLoginUser or RememberPassword one client lacks is filled in. Device:
the x86 client signs in with the arm64 token on a fresh install and on an
install left signed out, and the arm64 client stays signed in.