DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.
fix: build and test on Windows
- .gitattributes keeps the session's scripts LF under core.autocrlf=true;
CRLF scripts made every session exit with status 2.
- runtime_inputs.py and the scrub record / log zip use '/' in relative
paths, which Windows reported with '\' (runtime inputs never matched).
- The read-only-folder scrub test is skipped on Windows, which still
creates files in a read-only directory.
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Space checks before Epic, GOG and Amazon installs (measured zero vs unknown), clear failure reasons with retry/clear, resume-aware checks, and safe per-file replacement so a failed or cancelled update never breaks an installed game.
Epic installs stream chunks straight into staged files in parallel (most bytes written once, a small budgeted cache for shared chunks, about 1x game size instead of 2x), pace updates by free space, and keep the lookahead, batch and bounded Java writers as hidden alternatives.
Co-authored-by: Juan Marti Mercado <juanma@microsoft.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
* Add opt-in zRAM compression for the Steam client while a game runs
A "zRAM compression" toggle under Steam > Settings > Session, below
"Keep downloads running". Off by default, kept once set, and disabled
on devices without swap or with a kernel older than 5.4.
When on, the session watches for Steam's reaper. 20 s into a game the
client and its web helpers page their private anonymous memory out to
the device's zram with MADV_PAGEOUT from inside their own process
(libblsession zram.c, SIGURG), again every 5 minutes, and read every
swapped page back once the game exits. No root is needed: only a
process itself may do this without CAP_SYS_NICE. With the toggle off
nothing is installed or started.
RedMagic NP06J, Palworld: Steam's resident memory fell from ~1.7 GB to
~1.1 GB with ~560 MB in zram, available memory during play rose by
~0.5-0.8 GB, and ~2 MB was left in zram after the read-back.
* Turn zRAM compression on by default below 12 GB of RAM
Until the toggle is changed, it follows the device: on when the kernel
supports it and the device has less than 12 GB of RAM, read from the
advertised memory size on Android 14+ and from total memory before that.
Turning it off is kept.
---------
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* feat: add Cardboard mode with side-by-side lens-distorted eyes and 3DoF head tracking
* fix: derive the Cardboard field of view from the panel and recentre fully when far from upright
* feat: share the Cardboard head pose with the guest and add a SteamVR driver for it
* feat: run SteamVR's compositor on Turnip/KGSL with a display-extension layer and a driver-direct HMD
* feat: show SteamVR frames in Cardboard mode through a driver-side presenter and a fake direct-mode display
* feat: install and start SteamVR for Cardboard mode from the session drawer
* docs: describe Cardboard mode and the SteamVR path
* feat: drive SteamVR hands from the game pad and keep the Cardboard headset out of standby
* docs: record where the SteamVR dashboard stops
* fix: map Cardboard head tracking to the screen's axes and keep turns about the real vertical as yaw
* fix: give Cardboard its previous picture back when SteamVR stops
* fix: report sem_otime from emulated SysV semaphores so SteamVR's web helper can start
* fix: bridge SteamVR's shared semaphores across processes and keep Steam alive while SteamVR runs
* feat: present SteamVR straight to DroidDeck's compositor at panel resolution
* docs: update Cardboard VR notes for the dashboard, semaphore bridge and direct presenter
* fix: keep Wine and FEX signal handlers in the VR layer; add semaphore tracing
* fix: clear a stale SteamVR active marker on status
* fix: clear only an old SteamVR active marker
* fix: unblock SteamVR clients on Turnip and keep Steam's web helper alive across SteamVR runs
* fix: judge shared waits before a submit's own signals and on Vulkan 1.0 devices
* docs: record VR games, SteamVR Home and OpenXR results on the Thor
* docs: add Cardboard VR learnings from the Thor bring-up
* docs: add Cardboard VR screenshots from the Thor
* fix: keep the VR layer's display stand-in to SteamVR runs and clear a leftover marker at session start
* fix: report SteamVR start and stop failures from the helper's exit code
A game that closes as soon as it starts can be tripped by Proton's Steam
setup (steam.exe, the Steam registry entries, the Steam client bridge).
The Games page of the session drawer gets a per-game Start without Steam
switch, stored as DROIDDECK_NO_STEAM=1 in the game's environment and listed
in its profile summary.
droiddeck-game-env acts on it for a game launch only: a Proton with umu's
launch (GE-Proton, Proton-CachyOS, DroidDeck-Proton) gets UMU_ID, so it
runs umu.exe in place of steam.exe and still sets up the prefix; a Steam
game keeps its protonfixes under its own id, an added game gets 0. Any
other Proton runs the game straight in the prefix (runinprefix).
* feat: components list newest first, Steam's sheet opens on its Steam tab with offline mode, and Setup's overview drops the account group
* fix: chip selections stretch across on every move, drawn over the chips instead of behind them
* feat(profiles): add persistent per-game compatibility profiles
* fix(profiles): show Windows component overrides
Include per-game Windows component selections in the resolved profile summary so the session overlay marks those games as custom and shows the selected components.
* fix(session): detect Proton games across runtime paths
* fix(profiles): select the active Gamescope game
* fix(profiles): improve per-game reset feedback
* fix(profiles): align session components with game overrides
* fix(session): prefer selected Steam game during refresh
* fix(session): resume profile following when reopening games
* chore: keep local dev testing outside the repository
* test(session): remove local dev package path
* fix(session): preserve profiles when refresh fails
* fix(session): reject empty game profile reset scope
* perf(session): cache drawer inventory by refresh revision
* fix(profiles): align game presets and profile reset behavior
* fix(profiles): preserve originals and normalize shortcut ids
* fix(profiles): keep editor scope stable after rebase
* fix(tests): host Compose tests in both build variants
* fix(profiles): recover interrupted component selection saves
---------
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* fix: Red Dead Redemption 2 launches again, its Vulkan runtime installer is left to run
droiddeck-seed-redists marked every process in every game's install script
as already run, Red Dead Redemption 2's VulkanRT-1.1.108.0 installer
included. Steam's compat config for the game says nativevulkanloader, so
Proton loads vulkan-1.dll native only, and Khronos' loader is in the prefix
only once that installer has run. Without it the Rockstar launcher starts
RDR2.exe and it exits with STATUS_DLL_NOT_FOUND (0xc0000135) before it
opens a window.
A Vulkan runtime installer is now left out of the seeding, and a marker an
earlier seeding wrote for one comes out of each prefix and Proton template
once (dates kept), so the client runs the installer on the next launch.
The installer finishes in a few seconds under FEX.
* fix: Steam's screensaver no longer covers a running game
The client's defaults show screensavers while a game runs, after 300 s on
AC power without a button press - and a held stick or trigger is no press.
Red Dead Redemption 2's intro runs longer than that: the slideshow covered
the game, and the button that woke it reached the game too (B asked to
quit to the desktop). Customization/Screensaver/WhileInGame is seeded "0"
in config.vdf once, like the UI scale and native resolution, so turning it
back on in Settings stays the user's choice.
On the RedMagic: 18 minutes from the last button press through the intro
and riding, focus never left the game and no screensaver was created.
* fix: Rockstar's hidden launcher no longer takes cores from its game
The Rockstar Games Launcher keeps drawing its Chromium interface
(SocialClubHelper.exe: renderers, and a GPU process compositing through
DXVK) for as long as the game runs, hidden behind it - and Wine passes
Chromium's priorities on, so those threads ran above the game's (the GPU
process at nice -10), across every core. With Red Dead Redemption 2 in
front that was 1.3 to 2.5 cores under FEX for a page nobody sees.
droiddeck-launcher-cores follows gamescope's focus from the agent's
focus.json: while a game window has it, every SocialClubHelper thread runs
on the last core of the slowest cluster at nice 19; when the launcher's own
window has focus again each thread gets its own mask and priority back
(also on exit). Stopping the helpers would not hold - proot resumes a
stopped tracee. Started for Steam sessions; BL_LAUNCHER_CORES=0 turns it off.
RedMagic, RDR2 all Low, riding at the thermal limit, same spot and session:
released 46.5 fps, 1% low 27.5, p99 31.8 ms, CPU 89%, 2200 MHz;
held 48.7 fps, 1% low 32.6, p99 27.6 ms, CPU 79%, 2638 MHz.
* fix: sessions clean up what earlier ones left in /tmp
The guest's /tmp is a directory in the rootfs that no boot ever empties,
and Android ends sessions by killing them. Every session left a
/tmp/mangohud.XXXXXXXX (mktemp, never removed), and the Steam client, its
web helper, Chromium apps, dbus-run-session, AppImage runs and KDE their
own temporary files and sockets: 1,422 entries on the RedMagic.
mangoapp's config is now one fixed file rewritten each session, and the
session's first pass sweeps each kind of leftover while nothing that could
own one is running, with a single find. On the device that cleared 1,391
entries over two sessions, leaving 38.
Setup > Proton versions lists DroidDeck-Proton (The412Banner/DroidDeck-Proton) beside
GE-Proton and proton-cachyos: same aarch64 tarball pattern as GE, verified against its
sha512 file, installed by droiddeck-proton-extra (also as "droiddeck" in the session queue)
and adopted by steam-compatibility like any other extra, so it shows as
"DroidDeck-Proton <ver> (Compatible)". Its folder has a space; nothing in the install,
adopt, esync or components paths splits on it.
Update checks: each source's newest full release is looked up at app start and when the
page opens, at most every 6 h (offline keeps the last answer). A newer release shows
"Update available -> <tag>" with Update; it installs beside the old build, which stays
until removed ("Remove old ... versions"), since games are mapped to it by name.
Installed builds are ordered by their version numbers (11-9 before 11-10), not by name,
and the tag each was installed from is recorded. Prereleases and drafts are skipped.
Each game's Windows components now come from the list its own source
trusts, and the ones that list names turn on by themselves. The user's own
on/off switches always win; each automatic row says why it is on.
- Steam games: the Steamworks Shared redistributables Steam installs with
the game (appmanifest SharedDepots, else the client's appinfo.vdf).
Steam keeps its install scripts marked as already run.
- GOG: the build manifest's dependencies. Epic: the manifest's
prerequisite (Unreal's maps to VC++ and DirectX). Amazon: fuel.json
PostInstall. Older GOG/Epic installs get their list fetched once with the
saved sign-in; game files are never downloaded again.
- Custom games (the + button, Add all, migrated folders): one shared Steam
match per game, also used for artwork. An appid from the game's files
turns components on; a name-only match stays Recommended; no match falls
back to the folder scan.
- Steam app info for apps the client never saw comes from an anonymous
Steam PICS lookup (CM websocket, anonymous logon, product info), cached
per appid; the user's Steam sign-in is never used.
- Missing components download in the background on one low-priority
worker that pauses during sessions and waits on battery saver, heat or a
metered network unless the user asked. A game Steam installs during a
session is readied right away so it can be played without ending the
session; the launch waits up to 10 s only for a component still on its
way.
- Page: "On for this game" with reasons, a quiet "Checking what this game
needs..." only for games never worked out, rows that ease in, pieces that
need a download greyed out while offline. The intro names no other app.
- The folder scan skips Unity's *_Data/Managed (Mono, not .NET Framework).
Preload the FEX fault report only where x86 loaders look
droiddeck-fex put the x86 libfaultreport.so in LD_PRELOAD, which FEX's own
arm64 loader reads too - and FEXServer's, and every child FEX's - so each
x86 start printed "ERROR: ld.so: object '.../libfaultreport.so' from
LD_PRELOAD cannot be preloaded", and an i386 child added "wrong ELF class".
It is now listed in the x86 runtime's own /etc/ld.so.preload, which only
the loaders inside FEX read, as /usr/$LIB/droiddeck/libfaultreport.so.
faultreport.c builds for i386 too, so 32-bit programs get the report as
well instead of an error.
* Run programs, scripts and AppImages from the desktop
Windows programs open with the Proton Steam has chosen, and a Steam game's own
launch program is handed to Steam. x86-64 Linux programs and game scripts run
under FEX, and an exec the kernel refuses goes to droiddeck-open through
libblsession's binfmt.c. Programs on noexec shared storage pass KIO's checks; a
folder of Linux programs there, and sharun AppImages, are added by the app once
and run from the copy. Executable scripts run without KIO's prompt, mpv plays
on the software desktop, FEXServer's socket moves under XDG_RUNTIME_DIR, and
Proton runtimes no longer show up as games.
* Switch to Desktop from Big Picture without Deck mode
Big Picture's Switch to Desktop asks the client's SteamOS manager, which the
client only has when started as SteamOS (Deck mode). Without it the request
failed and the screen stayed on "Switching to Desktop..." for good. The live
compat helper now sees the request on its way to the client and hands it to
steamos-session-select, which opens the KDE desktop as Deck mode already did.
* Run x86 programs from shared storage where they lie
FEX asks for the guest's PROT_EXEC when it maps a program or library, which
the kernel refuses on noexec shared storage; FEX never runs those pages
itself, so libblsession maps them without it in FEX's processes. An x86
game, its libraries and its start script now run in place instead of being
copied in; only native code on noexec storage is still copied.
A Steam library's games are never copied, and a Linux game's launch program
opened from the desktop goes to Steam like a Windows one.
The Windows components catalog, the desktop and emulator packages, the Linux runtime and the
Steam seed now live on the organisation's components repository, mirrored and built there by
CI; the app reads the catalogs from its main and the files from its releases. The personal
winlator-contents mirror keeps serving older app versions and Bannerlator.
Games folders saved before the settings section went away were still
registered as Steam libraries on Automatic, with no way left to remove
them. Once, at app start and before any scan, each game such a folder
listed becomes an entry of its own, keeping everything keyed by its folder
(chosen exe, shortcut appid, name, Start in, launch options, art,
removal); store installs and steamapps are skipped. The folders stay bound
at their old guest paths, so no shortcut changes, and the saved roots are
cleared. A Games folder stays a library only when Steam installed a game
into it; the others leave the library list, and the runtime forgets them.
Its files sit in a container no extractor opens and may not be hosted, so a recording cannot
source them; installing it means running the installer in the prefix, which no runtime here
does. With it gone the waiting section is empty.
art2kmin.exe is Setup.exe + Data1.msi in a wrapper 7-Zip opens, so the MSI engine lays it out
like any other package; it was on the setup-program list by assumption.
* Windows components: hide Vulkan RT, whose loader every Proton here ships
vulkan-1.dll is in lib/wine/x86_64-windows and i386-windows of Proton Experimental (ARM64),
GE-Proton and proton-cachyos alike, so the catalog's VulkanRT entry would only shadow it. It
joins the list the page leaves out.
* Windows components: the waiting section says what is really missing (a recording), not 'coming next'
* Windows components: leave out the IE8 security update, which patches a browser no prefix has
* Windows components: the waiting caption without an apostrophe the resource compiler rejects