Backing out of the loading screen, closing the ended screen and the session ending on its own
used the slide-down card exit. Now, while the session is on screen, the blue spreads out of
the throbber's ball (the middle of the screen once a game is up) until it covers the screen,
and the front end opens on it and draws it back into the button the session came from, as it
already did after the drawer's Stop. A retry, a session closing off screen and animations off
still close at once; a timeout closes it should the flood never run.
* perf: answer Turnip's zero-timeout KGSL timestamp polls without blocking
Turnip polls a timeline point with IOCTL_KGSL_DEVICE_WAITTIMESTAMP_CTXTID
and a timeout of 0, which KGSL reads as wait forever; Mesa does it under
a lock on every signalling submit, so vkd3d-proton, DXVK, gamescope and
Zink ran in lock-step with the GPU. The session preload now answers
those polls from the context's retired timestamp and passes everything
else to the kernel. Bannerlator measured a D3D12 demo at 614 -> 4335 fps
with the same answer in its Vulkan adapter. BL_NO_KGSL_POLL_FIX=1 turns
it off.
* perf: frame limiter, live panel refresh, opt-in GPU clock pin, cheaper cursor sync
- A per-mode frame limit (Steam and desktop settings, off by default):
gamescope's -r, the compositor's buffer-release pacer, the display
layer's frame-rate vote and a panel mode the cap divides evenly, as
WinNative's per-shortcut limit does. BL_FPS was always 0 and the
pacer's limit was never set.
- The compositor follows the panel's refresh rate when it changes
mid-session instead of reporting the rate read at start. (WinNative.)
- Performance > GPU: hold the Adreno clock at its top through KGSL's
power-control property, no root (Bannerlator's PerfGpuTurbo). Off by
default; cleared when the session stops and at the next app start if
a killed process left it set.
- The cursor image is copied across JNI only when its serial changes,
not on every pointer move.
* perf: stop re-seeding every prefix every 5 s, and run the library helpers only on change
- bannerlator-seed-redists stamped its change check from a block that
carried the current time, so it never matched: every prefix had ~32
keys appended to system.reg on every beat. The stamp now comes from
the names; Proton's prefix template is seeded too (date kept), with
WinNative's built-in list until the client has the install scripts.
- The library beat runs the seeder every 15 s and steam-compat only
when a directory it reads has changed, or once a minute.
- The client-core pin reads /proc itself and runs taskset -a only for
new processes or ones that grew threads.
- The games watcher backs off after a failed ownership probe and does
not probe while a game runs.
- The Proton launcher runs the newest ARM64 depot by build number, and
PROTON_USE_PIPEWIRE defaults to 0. (WinNative.)
* perf: Mesa's database shader cache, and proot's tracer above the guest
- MESA_DISK_CACHE_DATABASE=1 for the session: the file cache opens a
file per lookup and opens and renames one per store, each a proot
stop; the database is opened once and used with pread/pwrite.
- proot's single tracer thread is raised to nice -6 (under the
compositor's -8) two seconds after it starts, so the first guest
process it forks keeps nice 0. setpriority() directly, not
Process.setThreadPriority, which would also move its cgroup.
* feat(lsfg): take Lossless Scaling from Steam by itself, import it once owned, rebuild on update
- Lossless.kt owns the DLL and its shader cache. The copy the Steam
client installs (runtime library or the card's) is taken by itself
and taken again when the client updates it (size/mtime stamp). The
DLL is copied in and built into a cache named after its SHA-256, so
a new DLL hands the compositor a new path; a build that fails keeps
the working cache. Builds are serialized.
- The Steam session asks the signed-in client once per session whether
the account owns app 993090 until the answer is yes, then records it
and the app stops asking (BL_LOSSLESS_OWNED). Once owned, the frame
generation menu offers "Import Lossless.dll…", on the main screen and
in the session drawer; an import stays until Steam's copy changes.
- The compositor restarts the LSFG engine when its cache path changes,
and a new engine selection clears an earlier start failure, so an
updated DLL or a retry no longer needs the app restarted.
- The HUD says when LSFG is waiting on Lossless Scaling instead of
"starting"; frame generation strings are resources.
- Removed LsfgNative's unused DLL variant and cache-match calls.
* Find Lossless.dll in added Games libraries too
* LSFG: 120, 90 and 60 fps targets alongside 2x-4x
The pacer's target-rate mode picks 0-3 generations per game frame. While it
is warm the input ring and shared chain follow every frame, so frames that
generate nothing don't leave the next one without history.
* Credit LSFG: Camille LaVey / Eden, ported to WinNative and DroidDeck by @maxjivi05
* LSFG: aim 0.1 fps under the target so output never passes the refresh rate
* feat: run Flatpak apps through a proot bwrap stand-in and add a Flathub store
* feat: give Flatpak apps the KGSL GPU, the controllers and a CPU LLVM can target
* feat: Flatpak games on the desktop, Store apps on the Desktop page, safer remove
* test: cover the sandbox planner and store helpers; docs: explain Flatpak on DroidDeck
* fix: keep controller focus through Store tabs and app pages; show progress per Flatpak step
* fix: let Chromium, Electron and Firefox Flatpaks start without their own sandboxes
* fix: fetch Flatpak's supporting libraries when the runtime lacks them
* fix: add Flathub without a download, log store commands, keep Electron apps on X11 under gamescope
* feat: import ARM64 AppImages from storage and run them from the Desktop page
* fix: report failed Flatpak installs as failures and deploy runtimes that ship a resolv.conf link
* fix: let Flatpak create its repo where Android denies hard links
* fix: point store commands at the current network's DNS
* fix: keep failed Flatpak extensions non-fatal, give Electron AppImages a bus, X11 and time to relaunch
* docs: AppImage import and what x86 apps would take
* feat: put the Flathub Store and AppImage import behind beta toggles in Setup
---------
Co-authored-by: MaxsTechReview <maxjividen@gmail.com>
* feat: stand in for /dev/uinput so Steam Input's virtual pads reach games
* feat: present the pad to the Steam client as a Steam Deck controller over hidraw
* docs: log the uinput stand-in and the Steam Deck controller
* feat: feed the handheld's gyro and accelerometer to the Steam Deck controller
* feat: let the Steam page choose between the Steam Deck controller and the Xbox 360 pad
* feat: Deck back grips and trackpads on the second screen
* fix: serialize ring teardown with its writers, fall back to the Xbox pad when the Deck cannot be set up, and read motion only for a Deck
* fix: keep the second screen's choice through sleep and bring it back on wake
A replaced buffer went straight back to a game with no frame limit, so a
MAILBOX/IMMEDIATE swapchain drew frames that were never shown; it now
comes back once per refresh as in WinNative. gamescope's -r and the
compositor read the rate of the mode the activity asked for rather than
the one the panel was still in, and the zero-copy layer votes it.
Sustained performance mode, which caps clocks on most power HALs, and
the ADPF session, which reported frame intervals as work, are gone.
* docs(release): draft 0.2.0 beta notes
* docs(release): credit prs and authors in 0.2.0 notes
* docs(release): add #39 and #45 to 0.2.0 notes
* chore: update readme
* fix(ui): cover the whole screen with the capsule wall
The wall was shifted right and then tilted around its own centre, which
left the bottom-left of the home and loading screens bare. Centre it and
size it to the tilted page's bounding box so every corner stays covered.
* feat(ui): flood from the play button into the throbber
Starting a session from a blue button no longer slides the session up
over the front end. The button stretches out on staggered springs until
the page is the ball's blue, the session opens on that same blue with no
window animation, and the blue gathers into the throbber's ball before
the throbber starts. Re-joining a running session, tiles and reduced
motion keep the old rise.
* docs(release): cover everything since 0.1 in the 0.2.0 notes
0.2.0 is the first release from the org, so list what DroidDeck does
as a whole, grouped by area: org pull requests as #N, pull requests
from before the move as The412Banner/DroidDeck#N, and the early work
that predates pull requests by author. CI and build work gets one
short section instead of a line each.
* docs(release): add screenshots and animations to the 0.2.0 notes
Lead with a game running and a few visual highlights, fold the full
list into collapsible sections by area, and shorten every line to the
feature and its credit. Pre-move pull requests read as legacy#N.
* fix(session): give the desktop its own loading hints
The loading screen's hints were written for Steam, so starting the
desktop or an emulator said the first run downloads Steam and that
leaving the app pauses Steam. Desktop and program sessions now rotate
through hints about the desktop instead.
* fix(build): skip incomplete NDKs when picking one locally
An interrupted sdkmanager install leaves a directory like
28.2.13676358.failed under ndk/, which sorted last and was picked
without a toolchain in it. Only consider directories that carry
source.properties.
* docs(release): show launching straight into Big Picture
* docs(release): credit the launch transition to #46
The runtime setup now also fetches Proton Experimental (ARM64) and its
appmanifest from a catalog of their own (steam-seed.json) and unpacks them
where the client keeps them. At the first sign-in the compatibility tool is
already installed and the default, with no install dialog, no download and
no client restart; the client adopts the manifest and updates it like any
other app.
Done once: an install the client fetched itself, or one the user removed,
is left alone. A failed fetch stops nothing - the session asks the client
for it after sign-in, as before.
A Components entry under Desktop opens a page built like the driver pages: a
Proton drop-down, FEX / DXVK / VKD3D-Proton tabs, what is in use, the installed
rows (each Proton build's original bundle and the stored packages; tap to
swap in, trash to delete), downloads from the Nightlies -Linux releases behind
the refresh button, and Import .wcp.
The session drawer gets a fourth tab, Components, for quick swaps between
what is installed. A swap into the Proton a running game uses waits until the
game closes and is applied then (drawer refresh, or the main screen on resume).
ComponentsManager keeps the same package format, originals layout and state as
the Decky Components Manager plugin and takes its data over once. A swap clears
only the component's own DLLs, so files a Proton keeps beside them stay.
On the pointer path (a client that takes no wl_touch - gamescope), touch_down counted the
fingers still down before clearing a sequence whose up had been lost, so the stale point left
any_active set and every later tap or swipe was dropped: in Direct touch mode Big Picture
ignored the screen while the pad worked. The count is taken after the clean-up, and the app
ends whatever the compositor still holds when a new gesture's first finger lands (Android has
ended every earlier gesture by then). The compositor logs once per gesture whether the window
got touch or the pointer.
The drawer's DESKTOP ended Big Picture and landed on the front end. The session activity is
singleTop: startActivity(next) from it went to its own onNewIntent and was dropped when it
finished (on device the next session came up as "steam", not the desktop). It now restarts on
the request's intent (setIntent + recreate), as an agent start does; the desktop's Steam
launchers' handoff to a Steam session goes the same way.
Big Picture's own Switch to Desktop waits on SteamOS Manager and never finishes here. The
drawer's Steam row gets a DESKTOP button beside STEAM and QAM: the session ends and the desktop
starts in its place with Steam's desktop client open (the relaunch the Steam Desktop UI button
uses).
The compositor threw every wl_pointer.set_cursor image away and the app drew one fixed arrow,
so the desktop never showed labwc's resize arrows at a window's edges and corners. Ported from
Bannerlator (7f19c669): the cursor surface gets a role, its image is snapshotted on commit with
its hotspot, and a NULL surface or buffer is an authoritative hide; the app's overlay draws the
image at the session's scale. New here: labwc on Vulkan/GLES hands its cursor over as a dma-buf
(wlroots' nested backend, usually UBWC), so it is read back through a small linear host-visible
copy (vkp_image_readback). The built-in arrow stays until a program sets a cursor.
The arrow is drawn by the app and, outside a Steam session, never went away once shown - on
the desktop and over emulators started from the front end alike. A button press, a stick,
trigger or d-pad past halfway, or any on-screen control now hides it (PadBridge tells the
activity); the next touchpad or mouse move brings it back, once the pad has been quiet for
1.2 s so a touch during play does not flash it up (Bannerlator's rule for its Wayland pointer).
- bannerlator-pad-defaults: new installs start on the Hybrid layout with sharp pixels; an
existing install is moved once, only where still on melonDS's defaults (marker keeps later
choices). Guide = HK_FullscreenToggle. The user's DS/DSi BIOS, firmware and NAND are found in
ROMs/nds/{bios,firmware} and filled in only where melonDS has no path.
- Front end starts melonDS with -f, at the panel's own resolution unless the user chose one.
The on-screen pad is now placed from the panel's physical size: the
sticks and face buttons sit at the two-thumb rest point (about 17% of
the width inboard, 28% of the height up, clamped in millimetres), with
the d-pad and right stick below-inboard, shoulders above, and nothing
ever placed off screen or under a display cutout. Button sizes are
unchanged.
Setup > Controller holds the on-screen controls mode, a tint (Steam
blue #1A9FFF by default), opacity, button size, stick click (double-tap
for L3/R3), a full-screen layout editor, per-button mapping including
LT/RT, and resets for each.
Also from WinNative #772: the fakeinput ring poll backoff is capped at
2 ms instead of 16 ms, the session asks for unbuffered joystick input,
and the on-screen controls request unbuffered dispatch per gesture and
release everything when detached. The QAM button no longer draws at the
top-left corner in full-pad mode.