Commit Graph
173 Commits
Author SHA1 Message Date
The412Banner a4d47cf33e Non-Adreno round 8: bridge sharing fallback and crash detail, Venus diagnostics and 1.2 gate, compositor disconnect reasons, RADV upstream
- Mali bridge: the self-test fails "memory sharing" when the server offers
  no host-visible memory type (no sharing method passed, RP4 Pro G77); the
  session then falls back to the PanVK pair like a failed draw, and Setup
  says the bridge cannot share memory with that driver. Without a pair to
  fall back on, the log says so.
- Mali bridge: a guarded driver crash now logs the sub-command it was in,
  the fault address and pc (library + offset via dladdr), the command
  buffer's level, begin flags, pool flags and state, and the last 32
  replayed commands. Begin on an executable buffer from a pool without
  RESET_COMMAND_BUFFER_BIT is logged once (implicit reset).
- Venus: vulkan-summary.txt gets the device extension list and key
  features (full vulkaninfo in vulkan-full.txt); a failed GL probe runs
  once with VN_DEBUG=init,result, ZINK_DEBUG=mem, MESA_LOG_LEVEL=debug and
  the layer trace into glprobe-trace.txt. The Mali compatibility layer's
  trace covers every pre-device query (devices, memory, queue families,
  formats, image formats, external handles) and names the extensions.
- Venus: off when the phone's driver reports Vulkan below 1.2 (gamescope
  skips such a device); Setup and the graphics report say why and the
  session uses the PanVK pair.
- Compositor: libwayland's own disconnect reasons go to wayland.log, and a
  client's buffer may grow to 1 MB before a slow reader is dropped. A
  session that ended without teardown records Android's exit reasons.
- Drivers: RADV-Xclipse upstream (radv-xclipse-upstream) is a manual
  choice for Xclipse; Auto keeps radv-xclipse.
2026-10-15 18:53:40 -04:00
The412Banner 521d666046 Merge org main 5aa245cf into the non-Adreno test branch
Conflicts resolved keeping both sides: main's comment cleanup (#764) taken
where only comments differed; the test branch's code kept everywhere else.
ensureAuto runs main's Quest auto drivers before the Mali paths;
vkp_update_map keeps the Quest layer path and the completion-unknown check
(pass_begin goes through it); gamescope backend selection plus main's
steam-mode cursor composite; droiddeck-session's watcher is main's shared
loop with the Venus GL probe after it; SessionFiles/runtime_inputs/build.yml
carry both the Xclipse layer and main's VR assets. Main's GPU detection
test follows the non-Adreno support text; the Steam presentation test
finds its block by code, not by a removed comment.
2026-10-15 18:40:47 -04:00
Kurt Himebauch ef16de6280 feat: storage page to see and free DroidDeck's storage (#913) 2026-10-15 16:45:37 -04:00
Kurt Himebauch d301148881 fix: keep SteamVR syscall hooks and report Steam crashes (#905)
* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope
2026-10-15 15:50:26 +00:00
The412Banner 36a9cbfc13 DroidDeck-Proton: get releases from the Droid-Deck org repo
DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.
2026-10-15 07:20:09 -04:00
39c8a0fe8c fix: Steam can restart more than twice in a session (#754)
* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-10-15 02:18:26 +00:00
Tjebbe Kerstens 913806f169 fix: seed redist markers again when the registry lost them (#793)
* fix: redist markers a replaced registry lost are seeded again

droiddeck-seed-redists recorded what it seeded in .droiddeck-redists and
trusted that record from then on. A Proton update replaces its
default_pfx system.reg but leaves our record beside it, and every new
prefix copies both, so new games got a record of markers their registry
never had: Steam then ran their install scripts for real. Batman: Arkham
City's AMD Dual-Core Optimizer installer hangs there, leaving the game
on "Running install script" on every launch.

Each recorded marker is now looked up in the registry, in both views
where both were written, and seeded again when it is gone; a record of
markers nobody wants any more is rewritten without them.

* Check every VC runtime architecture before keeping the vcrt marker

vcrt writes Installed for x86, x64 and arm64 in both registry views, but
present() only looked at x86. If only an x64 or arm64 value was gone the
runtime would not be seeded again. Require all six values and test the
loss of the arm64 Wow6432Node one.
2026-10-14 13:52:07 -04:00
Tjebbe Kerstens 7b018e6c42 fix: Batman: Arkham City starts with full x87 precision under FEX (#792)
Arkham City (BatmanAC.exe) stopped with Unreal's "Fatal error!" about
1.5 s after start: an access violation in BatmanAC.exe right after
steam.dll loads. The game leans on x87 and needs full precision under
FEX (FEX wiki), while the default FEX preset sets
FEX_X87REDUCEDPRECISION=1. Engine fixes sit above the shared preset and
below the player's own game profile, so a fix keyed on BatmanAC.exe
beside the started exe (BatmanAC.exe or BmLauncher.exe) restores
x87 precision for this game only. Arkham Asylum, which shares
BmLauncher.exe but not BatmanAC.exe, keeps the preset.
2026-10-14 13:52:01 -04:00
Kurt Himebauch 9838c83fc2 fix: store installs stay shortcuts instead of becoming Steam installs (#816) 2026-10-14 10:10:12 -04:00
Kurt Himebauch 799be037e5 Show controller-driven cursors in nested Wayland sessions (#759) 2026-10-14 08:25:08 -04:00
Kurt Himebauch 079261759e perf: the session's background watchers share two loops and one D-Bus service process (#575) 2026-10-14 01:02:24 -04:00
Kurt Himebauch 81e645a917 Fix microphone capture in DirectAudio games (#747) 2026-10-14 00:58:52 -04:00
Kurt Himebauch 06b09b37bd Preserve native Linux and FEX compatibility choices (#749) 2026-10-14 00:57:45 -04:00
Kurt Himebauch 0c3444afbc Wait for Steam shortcut overviews before cold launches (#758) 2026-10-14 00:55:04 -04:00
The412Banner e40cd36151 Non-Adreno round 7: bridge command-buffer guard, Venus Zink trace, PowerVR mangoapp, Xclipse label
- vkbridge server: every command buffer a device hands out is tracked; Begin,
  End (stream replay) and QueueSubmit refuse one it never allocated or has
  freed (VK_ERROR_DEVICE_LOST, logged) instead of passing it to the driver,
  where Mali's vkBeginCommandBuffer crashed the app (SIGSEGV 0x10, Steam's
  Zink on an Edge 60 and a Tab S11).
- vkbridge server: a fault inside the driver while serving a request cuts
  that client off (SIGSEGV/SIGBUS guard per request) and leaves its objects
  alone; the app and the other clients carry on. Other faults go to the
  previous handler.
- vkbridge server: the pipeline cache directory is copied; the JNI string it
  pointed at was freed (garbage in the cache path).
- Venus: DROIDDECK_MALI_COMPAT_TRACE=1 makes the Mali compatibility layer log
  what an application queries before vkCreateDevice; a failed glprobe adds a
  traced run and vulkaninfo --summary under the same environment.
- PowerVR: mangoapp draws with llvmpipe (Zink could not make it a swapchain
  and it crashed at every start).
- Setup: an Xclipse GPU reads "Experimental: RADV or the system Xclipse
  driver", not the PowerVR line.
2026-10-13 22:39:06 -04:00
Kurt Himebauch 83ec5708ed cleanup (#764) 2026-10-13 21:27:42 -04:00
The412Banner 4163b31b02 fix: Windows components: .NET Core / Desktop runtimes install again (#740)
droiddeck-msi-install: a DuplicateFile entry onto the file itself (dotnet.exe in the .NET host MSI) is skipped like Windows Installer does, instead of stopping the whole install with SameFileError. Fixes .NET Desktop 3/6/7/8, .NET Core 3 and .NET 5. Thanks to whatsupbros for finding and tracing it.
2026-10-13 19:03:38 -04:00
MaxsTechReviewandxXJsonDeruloXx f0c52c273b Add opt-in zRAM compression for the Steam client while a game runs (#442)
* Add opt-in zRAM compression for the Steam client while a game runs

A "zRAM compression" toggle under Steam > Settings > Session, below
"Keep downloads running". Off by default, kept once set, and disabled
on devices without swap or with a kernel older than 5.4.

When on, the session watches for Steam's reaper. 20 s into a game the
client and its web helpers page their private anonymous memory out to
the device's zram with MADV_PAGEOUT from inside their own process
(libblsession zram.c, SIGURG), again every 5 minutes, and read every
swapped page back once the game exits. No root is needed: only a
process itself may do this without CAP_SYS_NICE. With the toggle off
nothing is installed or started.

RedMagic NP06J, Palworld: Steam's resident memory fell from ~1.7 GB to
~1.1 GB with ~560 MB in zram, available memory during play rose by
~0.5-0.8 GB, and ~2 MB was left in zram after the read-back.

* Turn zRAM compression on by default below 12 GB of RAM

Until the toggle is changed, it follows the device: on when the kernel
supports it and the device has less than 12 GB of RAM, read from the
advertised memory size on Android 14+ and from total memory before that.
Turning it off is kept.

---------

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-13 13:33:19 -04:00
The412Banner 72196c3447 Non-Adreno round 6: PowerVR PRIME on old kernels, thermal, hang-up names, bridge flippable images, Venus Zink variants
- drm.c: PR #570's current PRIME ownership check (F_DUPFD_QUERY, then kcmp,
  then the F_SETOWN_EX owner marker): on a kernel before 6.10 with kcmp
  blocked, drmPrimeFDToHandle answered EOPNOTSUPP for every PowerVR import
  (Pixel 10, Android 17: Zink "failed drmPrimeFDToHandle", Xwayland error 7,
  gamescope X11 I/O error). The Mali stand-in node is kept.
- A /sys/class/thermal the kernel will not list gets an empty directory, so
  mangoapp no longer aborts on it.
- gamescope 0132: a hung-up waitable is named before the abort; 0133: the
  bridge's flippable images use supported-but-unexportable modifiers instead
  of asserting.
- Venus: when Zink does not start, the loader's view is logged and Zink is
  retried without ZINK_DEBUG=compact, with ZINK_DESCRIPTORS=auto and without
  kopper before falling back to llvmpipe.
2026-10-13 11:47:23 -04:00
Kurt Himebauch 3820445561 feat: Cardboard VR mode with ARM64 SteamVR (#704)
* feat: add Cardboard mode with side-by-side lens-distorted eyes and 3DoF head tracking

* fix: derive the Cardboard field of view from the panel and recentre fully when far from upright

* feat: share the Cardboard head pose with the guest and add a SteamVR driver for it

* feat: run SteamVR's compositor on Turnip/KGSL with a display-extension layer and a driver-direct HMD

* feat: show SteamVR frames in Cardboard mode through a driver-side presenter and a fake direct-mode display

* feat: install and start SteamVR for Cardboard mode from the session drawer

* docs: describe Cardboard mode and the SteamVR path

* feat: drive SteamVR hands from the game pad and keep the Cardboard headset out of standby

* docs: record where the SteamVR dashboard stops

* fix: map Cardboard head tracking to the screen's axes and keep turns about the real vertical as yaw

* fix: give Cardboard its previous picture back when SteamVR stops

* fix: report sem_otime from emulated SysV semaphores so SteamVR's web helper can start

* fix: bridge SteamVR's shared semaphores across processes and keep Steam alive while SteamVR runs

* feat: present SteamVR straight to DroidDeck's compositor at panel resolution

* docs: update Cardboard VR notes for the dashboard, semaphore bridge and direct presenter

* fix: keep Wine and FEX signal handlers in the VR layer; add semaphore tracing

* fix: clear a stale SteamVR active marker on status

* fix: clear only an old SteamVR active marker

* fix: unblock SteamVR clients on Turnip and keep Steam's web helper alive across SteamVR runs

* fix: judge shared waits before a submit's own signals and on Vulkan 1.0 devices

* docs: record VR games, SteamVR Home and OpenXR results on the Thor

* docs: add Cardboard VR learnings from the Thor bring-up

* docs: add Cardboard VR screenshots from the Thor

* fix: keep the VR layer's display stand-in to SteamVR runs and clear a leftover marker at session start

* fix: report SteamVR start and stop failures from the helper's exit code
2026-10-13 14:36:56 +00:00
The412Banner 6c8a086190 Non-Adreno round 4: Mali GPU-drawing block, gamescope YCbCr retry, GL probe, bridge draw sync
- Setup's "Steam interface: GPU drawing" is hidden on Mali and a saved "on" is
  cleared: with PanVK it rebooted an Edge 60 (G615) as steamwebhelper started.
  Kept for Xclipse.
- gamescope 0130: a composite pipeline refused at start-up is retried with a
  layout without immutable YCbCr samplers (G615 through Venus refused every
  composite shader; their SPIR-V has no Float16, so fp16 was not the cause).
- Venus: droiddeck-glprobe opens GL through GLX the way the Steam client does,
  with the loader's reasons logged; when it fails the client's GL goes to
  llvmpipe.
- vkbridge self-test: the draw check waits for the render pass's stores before
  copying out (a tiler read zeros without the dependency).
2026-10-13 09:27:50 -04:00
The412Banner 55b30fbf1d Non-Adreno round 3: bridge images, Venus GL, shared buffers, Steam GPU drawing
- vkbridge: the memory model skips lazily allocated types. Mali-G615 lists
  DEVICE_LOCAL|LAZILY_ALLOCATED first; taken as the device-local type it left
  images with no memory type (self-test "image clear/draw: setup" FAIL,
  gamescope "No compatible image memory type").
- Session: a bridge self-test that fails images or draws falls back to the
  runtime's driver pair for that session (BL_VKBRIDGE_FALLBACK_ICD); Setup
  and the graphics report say so.
- Venus: the Mali compatibility layer runs in every process but gamescope
  (DROIDDECK_MALI_COMPAT=1), so Zink in Steam and Xwayland gets
  nullDescriptor; null texel-buffer views get stand-ins too. Without
  nullDescriptor the session's GL goes to llvmpipe.
- gamescope 0129: a refused compute pipeline is named with its SPIR-V
  capabilities.
- Compositor: a buffer on two surfaces at once (gamescope's planes while a
  notification is up) is released only when the last one lets go.
- Open driver pairs: processes.txt timeline for the first three minutes;
  Setup "Steam interface: GPU drawing" turns off software web compositing.
2026-10-13 08:44:45 -04:00
The412Banner c32852e311 Mali: Venus gamescope without robustness2, the bridge switch honoured and kept, clean driver switches
- gamescope 0128: VK_EXT_robustness2 is optional. A Mali driver through Venus has none, and
  gamescope stopped at "Missing required extension: VK_EXT_robustness2" (the wayland_surface error
  after it was only the knock-on). Without it, unused descriptor slots point at a 1x1 texture
  instead of VK_NULL_HANDLE. (David Cimo's Pixel 9 driver has robustness2, so his build never
  needed this.) gamescope component rebuilt and pinned by sha.
- Open-files limit: on a GPU that is not an Adreno the session script raises the soft limit to the
  hard limit for the whole session tree (a PanVK-kbase session froze on "Too many open files"
  after ten minutes) and graphics-report.txt shows before and after. A stopgap; the driver leak is
  fixed separately.
- The Mali bridge switch is honoured: when on and usable it wins over a PanVK pair for the
  session (Venus still wins over it). Selecting a pair no longer switches the bridge off, which is
  why the switch did not survive an app restart (Auto re-selected the pair at start). Setup says
  when this phone cannot use the bridge at all.
- Driver switching: picking a Mali pair by hand keeps the display on the phone's own driver, as
  Auto does (a PanVK Android display stalls on Mali gralloc at "Waiting for Steam's first frame",
  and stayed set after switching back); installing a bundle again replaces it instead of adding a
  "-2" copy beside the old one.
- graphics-report.txt names the runtime driver's folder and libraries, and the previous session's
  drivers, flagged when they changed.
2026-10-13 06:35:25 -04:00
The412Banner d16ca4d8a8 Open driver pairs: vkd3d-proton reports the driver's caps; buffer attach/release tracing; Mesa log
- With a PanVK or RADV pair (BL_OPEN_DRIVER=1), droiddeck-game-env drops the app-wide
  VKD3D_FEATURE_LEVEL=12_2 and VKD3D_SHADER_MODEL=6_9 so vkd3d-proton reports what the driver has
  (an Unreal DX12 game crashed at start on PanVK with the overrides); a game's own setting still
  wins, and launch.txt records DROIDDECK_VKD3D_CAPS=driver.
- The compositor traces, on a GPU that is not an Adreno, the first 400 dma-buf attaches and buffer
  releases by wl_buffer id and sending line, and logs any release of a buffer already released
  and not attached again (gamescope's "Compositor released us but we were not acquired" on G925).
- Per-game logs no longer set MESA_DEBUG=silent, which kept mesa.log empty.
2026-10-12 23:01:47 -04:00
The412Banner 8e643b4747 Sound: nothing that can block in the daemon's start-up; Steam's web compositing in software on open pairs
- The S24 FE (US) daemon hung loading the plain AAudio sink from default.pa (its AAudio open
  blocks rather than fails), so it never finished starting. default.pa is back to DirectAudio
  alone inside .nofail; the fallbacks are loaded from the app once the daemon answers, each pactl
  bounded by its timeout (DirectAudio, then the plain sink with and without low latency). The
  guard waits 30 s and logs, with timestamps, how long the daemon took, whether its socket and
  pactl exist, and what it finally got.
- With an open driver pair on a GPU that is not an Adreno, Steam's CEF composites in software
  (-cef-disable-gpu-compositing) with GPU raster kept: RADV on Xclipse showed stale, half-written
  tiles, as #570 saw on PowerVR. The session log says so.
2026-10-12 22:26:00 -04:00
The412Banner e37f20625b Auto fetches the open drivers itself; Xclipse named as such; sound and frame-gen in the logs
- Auto looks online again when its saved release list predates this device's open drivers, so a
  Samsung or Mali phone gets its pair without pressing refresh first.
- A Samsung Xclipse is labelled "Samsung Xclipse" (not PowerVR), with its own support line.
- Per-game logs add audio-streams.txt: PulseAudio's sink inputs 20 s and 60 s into the launch,
  so a silent game shows whether its stream reached Pulse.
- graphics-report.txt states the frame-generation setting and keeps the LSFG gate, FrameGen and
  audio lines from app.log.
2026-10-12 20:28:51 -04:00
The412Banner 7e6bac5d01 Detailed graphics logs for non-Adreno test reports
- graphics-report.txt in every session folder: the graphics path the session draws with and why
  (Turnip, system Vulkan #570, Mali bridge #517, or an open driver pair with its release), the
  driver mode and choices, what Auto would pick, the GPU (family, Vulkan device name, kbase
  gpuinfo, Android, SoC, kernel), the GPU nodes the app can see (access, device numbers, SELinux
  label; nothing is opened) and the guest's graphics environment. At the end it adds the
  compositor's driver lines from app.log and the game launches that were logged.
- vulkan-summary.txt: the session's own vulkaninfo --summary with the driver as exported, in the
  background with a 10 s timeout.
- Per-game logs under games/<time>-<appid>/: Proton's log, DXVK's and vkd3d-proton's, Mesa's and
  PanVK's startup messages and the launch environment, from droiddeck-game-env. Each file is cut
  to 20 MB and the folder to 120 MB at the session's end.
- The per-game logs and the Vulkan summary are on for a GPU that is not an Adreno, and on an
  Adreno only with Setup's new "Detailed graphics logs" switch. Share logs already takes the
  whole session folder, so all of it is in the zip, scrubbed as before.
2026-10-12 19:55:18 -04:00
The412Banner b50d333f6c Test branch: make #570, #602 and #560/#561 pass each other's tests
- tools/dxvk/build.sh: #602's copy (its output checks) and the PowerVR pin in
  tools/powervr/release.json moved to that file's hash; the recipe's outputs are unchanged.
- droiddeck-session: the presentation block sets _bl_cef for #570's PowerVR path, and the UI
  block keeps main's order, defaulting to -cef-use-angle=vulkan when the block has not run.
- Compositor test harnesses: AHardwareBuffer stubs for #570's AHB import, and a stub for
  vkp_effects_forget_image (main #597) that #561's caller harness predates.
2026-10-12 19:00:06 -04:00
The412Banner ee0fb08268 Mali bridge (#517, by ASEbrahim) on the non-Adreno test branch
Squash of Droid-Deck/DroidDeck#517 (ASEbrahim/DroidDeck mali-bridge @ 6b823341): the Vulkan
bridge (tools/vkbridge) that runs the guest's Vulkan on the phone's own driver, with BC1-BC7,
clip/cull distance, vertex-divisor and depth-clip emulation and dma-heap memory sharing for Mali.
All of the bridge is ASEbrahim's work; squashed only to carry it on this test branch.

Combined with #570 on this branch, a device draws through exactly one path:
- Adreno: Turnip, unchanged (checked first; the bridge setting is ignored there).
- PowerVR / Xclipse with the system HAL and a render node: the system-Vulkan path (#570).
- Anything else with the Setup toggle on (Mali): the bridge.
2026-10-12 18:34:49 -04:00
The412Banner cf06f89c11 Merge #570 (PowerVR + Xclipse system Vulkan) into the non-Adreno test branch
# Conflicts:
#	.github/workflows/build.yml
#	app/src/main/java/com/droiddeck/launcher/session/SessionFiles.kt
#	app/src/main/java/com/droiddeck/launcher/session/SessionService.kt
#	tools/build_local.sh
#	tools/dxvk/build.sh
#	tools/linuxfs/overlay/usr/local/bin/droiddeck-session
#	tools/release/runtime_inputs.py
#	tools/tests/test_runtime_inputs.py
2026-10-12 18:34:02 -04:00
Jagger15 2503d69293 Add Quest 3/3S compatibility to the standard APK (#642) 2026-10-12 17:13:07 -04:00
Kurt Himebauch 5e38e79c96 Add opt-in GOG achievements through Comet (#651) 2026-10-12 16:40:06 -04:00
Kurt Himebauch 5e5ffee93e Default Snapdragon 8 Gen 2 core allocation (#654) 2026-10-12 16:26:24 -04:00
The412Banner 40bca96db5 feat: Start without Steam, a per-game switch for games that close right away
A game that closes as soon as it starts can be tripped by Proton's Steam
setup (steam.exe, the Steam registry entries, the Steam client bridge).
The Games page of the session drawer gets a per-game Start without Steam
switch, stored as DROIDDECK_NO_STEAM=1 in the game's environment and listed
in its profile summary.

droiddeck-game-env acts on it for a game launch only: a Proton with umu's
launch (GE-Proton, Proton-CachyOS, DroidDeck-Proton) gets UMU_ID, so it
runs umu.exe in place of steam.exe and still sets up the prefix; a Steam
game keeps its protonfixes under its own id, an added game gets 0. Any
other Proton runs the game straight in the prefix (runinprefix).
2026-10-12 13:55:56 -04:00
Muaz Kadan a2a9586b54 fix: Shut Down in Steam's power menu ends the session, and Restart restarts the client (#629) 2026-10-12 13:44:16 -04:00
Kurt Himebauch 6b2c8ace09 fix: keep the Steam desktop client in KDE (#610) 2026-10-12 06:56:56 -04:00
Stefan Zijlstra 44866db692 Experimental Samsung Xclipse support on the system Vulkan path
Detect Samsung's Vulkan HAL (vulkan.samsung.so) and its sgpu render node
alongside PowerVR, and run Xclipse through the same libhybris bridge:

- VK_LAYER_DROIDDECK_xclipse (tools/linuxfs/xclipse-layer), built with the
  glibc preloads and enabled only on Xclipse: sets bionic's environ for the
  driver's shader compiler, avoids immutable YCbCr samplers in compute
  layouts, forwards the KHR calibrated-timestamp entry points to the EXT
  ones, and reports textureCompressionBC and BC4/BC5 filtering over the
  compat layer's BC emulation.
- Upstream DXVK 2.6.2, pinned as a tar.gz component and selected on Xclipse:
  the driver has 128 bytes of push constants, DXVK 3 needs 256.
- android_wlegl accepts a zero stride and passes it through unchanged:
  Samsung's gralloc records none for GPU-only buffers.

Tested on a Galaxy A56 (Xclipse 540, driver 24.0.560): Steam Big Picture
and PICO PARK (D3D9).
2026-10-12 05:55:57 +02:00
wallentx bf033f2f11 Merge upstream main while preserving PowerVR integration 2026-10-11 19:30:00 -05:00
Juan MartíandKurt Himebauch 435beb7f19 feat: add persistent per-game compatibility profiles (#449)
* feat(profiles): add persistent per-game compatibility profiles

* fix(profiles): show Windows component overrides

Include per-game Windows component selections in the resolved profile summary so the session overlay marks those games as custom and shows the selected components.

* fix(session): detect Proton games across runtime paths

* fix(profiles): select the active Gamescope game

* fix(profiles): improve per-game reset feedback

* fix(profiles): align session components with game overrides

* fix(session): prefer selected Steam game during refresh

* fix(session): resume profile following when reopening games

* chore: keep local dev testing outside the repository

* test(session): remove local dev package path

* fix(session): preserve profiles when refresh fails

* fix(session): reject empty game profile reset scope

* perf(session): cache drawer inventory by refresh revision

* fix(profiles): align game presets and profile reset behavior

* fix(profiles): preserve originals and normalize shortcut ids

* fix(profiles): keep editor scope stable after rebase

* fix(tests): host Compose tests in both build variants

* fix(profiles): recover interrupted component selection saves

---------

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-10-11 17:00:28 -04:00
The412Banner 4995b3553b Merge remote-tracking branch 'org/main' into feat/droiddeck-proton-source 2026-10-11 15:56:18 -04:00
MaxsTechReview 3c2878cc52 Red Dead Redemption 2: launches again, no screensaver over games, hidden launcher held to one core, /tmp cleaned (#585)
* fix: Red Dead Redemption 2 launches again, its Vulkan runtime installer is left to run

droiddeck-seed-redists marked every process in every game's install script
as already run, Red Dead Redemption 2's VulkanRT-1.1.108.0 installer
included. Steam's compat config for the game says nativevulkanloader, so
Proton loads vulkan-1.dll native only, and Khronos' loader is in the prefix
only once that installer has run. Without it the Rockstar launcher starts
RDR2.exe and it exits with STATUS_DLL_NOT_FOUND (0xc0000135) before it
opens a window.

A Vulkan runtime installer is now left out of the seeding, and a marker an
earlier seeding wrote for one comes out of each prefix and Proton template
once (dates kept), so the client runs the installer on the next launch.
The installer finishes in a few seconds under FEX.

* fix: Steam's screensaver no longer covers a running game

The client's defaults show screensavers while a game runs, after 300 s on
AC power without a button press - and a held stick or trigger is no press.
Red Dead Redemption 2's intro runs longer than that: the slideshow covered
the game, and the button that woke it reached the game too (B asked to
quit to the desktop). Customization/Screensaver/WhileInGame is seeded "0"
in config.vdf once, like the UI scale and native resolution, so turning it
back on in Settings stays the user's choice.

On the RedMagic: 18 minutes from the last button press through the intro
and riding, focus never left the game and no screensaver was created.

* fix: Rockstar's hidden launcher no longer takes cores from its game

The Rockstar Games Launcher keeps drawing its Chromium interface
(SocialClubHelper.exe: renderers, and a GPU process compositing through
DXVK) for as long as the game runs, hidden behind it - and Wine passes
Chromium's priorities on, so those threads ran above the game's (the GPU
process at nice -10), across every core. With Red Dead Redemption 2 in
front that was 1.3 to 2.5 cores under FEX for a page nobody sees.

droiddeck-launcher-cores follows gamescope's focus from the agent's
focus.json: while a game window has it, every SocialClubHelper thread runs
on the last core of the slowest cluster at nice 19; when the launcher's own
window has focus again each thread gets its own mask and priority back
(also on exit). Stopping the helpers would not hold - proot resumes a
stopped tracee. Started for Steam sessions; BL_LAUNCHER_CORES=0 turns it off.

RedMagic, RDR2 all Low, riding at the thermal limit, same spot and session:
released 46.5 fps, 1% low 27.5, p99 31.8 ms, CPU 89%, 2200 MHz;
held 48.7 fps, 1% low 32.6, p99 27.6 ms, CPU 79%, 2638 MHz.

* fix: sessions clean up what earlier ones left in /tmp

The guest's /tmp is a directory in the rootfs that no boot ever empties,
and Android ends sessions by killing them. Every session left a
/tmp/mangohud.XXXXXXXX (mktemp, never removed), and the Steam client, its
web helper, Chromium apps, dbus-run-session, AppImage runs and KDE their
own temporary files and sockets: 1,422 entries on the RedMagic.

mangoapp's config is now one fixed file rewritten each session, and the
session's first pass sweeps each kind of leftover while nothing that could
own one is running, with a single find. On the device that cleared 1,391
entries over two sessions, leaving 38.
2026-10-11 15:53:01 -04:00
The412Banner 715032062d feat: DroidDeck-Proton as a Proton source, and update checks for every source
Setup > Proton versions lists DroidDeck-Proton (The412Banner/DroidDeck-Proton) beside
GE-Proton and proton-cachyos: same aarch64 tarball pattern as GE, verified against its
sha512 file, installed by droiddeck-proton-extra (also as "droiddeck" in the session queue)
and adopted by steam-compatibility like any other extra, so it shows as
"DroidDeck-Proton <ver> (Compatible)". Its folder has a space; nothing in the install,
adopt, esync or components paths splits on it.

Update checks: each source's newest full release is looked up at app start and when the
page opens, at most every 6 h (offline keeps the last answer). A newer release shows
"Update available -> <tag>" with Update; it installs beside the old build, which stays
until removed ("Remove old ... versions"), since games are mapped to it by name.
Installed builds are ordered by their version numbers (11-9 before 11-10), not by name,
and the tag each was installed from is recorded. Prereleases and drafts are skipped.
2026-10-11 15:32:07 -04:00
wallentx 8cf0373b5e Apply PowerVR Steam and game compatibility during normal launches 2026-10-11 04:01:50 -05:00
Kurt Himebauch 3dd14dd625 refactor: Steam always runs in Deck mode on the Deck beta branch (#546) 2026-10-10 22:15:42 -04:00
The412Banner d1b0ac4df1 Windows components: picked automatically by each game's source (#554)
Each game's Windows components now come from the list its own source
trusts, and the ones that list names turn on by themselves. The user's own
on/off switches always win; each automatic row says why it is on.

- Steam games: the Steamworks Shared redistributables Steam installs with
  the game (appmanifest SharedDepots, else the client's appinfo.vdf).
  Steam keeps its install scripts marked as already run.
- GOG: the build manifest's dependencies. Epic: the manifest's
  prerequisite (Unreal's maps to VC++ and DirectX). Amazon: fuel.json
  PostInstall. Older GOG/Epic installs get their list fetched once with the
  saved sign-in; game files are never downloaded again.
- Custom games (the + button, Add all, migrated folders): one shared Steam
  match per game, also used for artwork. An appid from the game's files
  turns components on; a name-only match stays Recommended; no match falls
  back to the folder scan.
- Steam app info for apps the client never saw comes from an anonymous
  Steam PICS lookup (CM websocket, anonymous logon, product info), cached
  per appid; the user's Steam sign-in is never used.
- Missing components download in the background on one low-priority
  worker that pauses during sessions and waits on battery saver, heat or a
  metered network unless the user asked. A game Steam installs during a
  session is readied right away so it can be played without ending the
  session; the launch waits up to 10 s only for a component still on its
  way.
- Page: "On for this game" with reasons, a quiet "Checking what this game
  needs..." only for games never worked out, rows that ease in, pieces that
  need a download greyed out while offline. The intro names no other app.
- The folder scan skips Unity's *_Data/Managed (Mono, not .NET Framework).
2026-10-10 21:15:56 -04:00
MaxsTechReview 0e225d0c6e FEX: preload the fault report only where x86 loaders look (#551)
Preload the FEX fault report only where x86 loaders look

droiddeck-fex put the x86 libfaultreport.so in LD_PRELOAD, which FEX's own
arm64 loader reads too - and FEXServer's, and every child FEX's - so each
x86 start printed "ERROR: ld.so: object '.../libfaultreport.so' from
LD_PRELOAD cannot be preloaded", and an i386 child added "wrong ELF class".
It is now listed in the x86 runtime's own /etc/ld.so.preload, which only
the loaders inside FEX read, as /usr/$LIB/droiddeck/libfaultreport.so.

faultreport.c builds for i386 too, so 32-bit programs get the report as
well instead of an error.
2026-10-10 19:12:51 -04:00
MaxsTechReview d9cd0d2cc8 Desktop: run programs, scripts and AppImages; Switch to Desktop without Deck mode (#549)
* Run programs, scripts and AppImages from the desktop

Windows programs open with the Proton Steam has chosen, and a Steam game's own
launch program is handed to Steam. x86-64 Linux programs and game scripts run
under FEX, and an exec the kernel refuses goes to droiddeck-open through
libblsession's binfmt.c. Programs on noexec shared storage pass KIO's checks; a
folder of Linux programs there, and sharun AppImages, are added by the app once
and run from the copy. Executable scripts run without KIO's prompt, mpv plays
on the software desktop, FEXServer's socket moves under XDG_RUNTIME_DIR, and
Proton runtimes no longer show up as games.

* Switch to Desktop from Big Picture without Deck mode

Big Picture's Switch to Desktop asks the client's SteamOS manager, which the
client only has when started as SteamOS (Deck mode). Without it the request
failed and the screen stayed on "Switching to Desktop..." for good. The live
compat helper now sees the request on its way to the client and hands it to
steamos-session-select, which opens the KDE desktop as Deck mode already did.

* Run x86 programs from shared storage where they lie

FEX asks for the guest's PROT_EXEC when it maps a program or library, which
the kernel refuses on noexec shared storage; FEX never runs those pages
itself, so libblsession maps them without it in FEX's processes. An x86
game, its libraries and its start script now run in place instead of being
copied in; only native code on noexec storage is still copied.

A Steam library's games are never copied, and a Linux game's launch program
opened from the desktop goes to Steam like a Windows one.
2026-10-10 19:12:20 -04:00
MaxsTechReview eadebc46d5 Performance: idle front end, proot stops, launch-time passes and log collection (#529)
* Front end: draw the capsule wall without clipping it every frame

The tilted wall clipped each capsule to a rounded rect and recomposed its columns on every drift
step, and a rotated rounded clip is rasterised in software on the render threads: the idle main
page held about 1.7 cores. The art is now loaded at the capsule's size with its corners already
rounded, each column draws its capsules itself in one layer moved by the drift, and the drift
advances at most every 15 ms. The idle page takes about a third of a core.

* libfakeinput: let calls on descriptors it does not serve skip its lock

Every read, write, ioctl, close and poll of every process in a Proton session went through the
controller lock and the three map lookups, Wine's wineserver pipes and the game's files alike.
A bitmap of the descriptors the maps hold, set before one is handed out and cleared when it is
closed, lets everything else go straight to the kernel.

* Pad motion: ask the display for its rotation four times a second

The rotation was looked up for every sensor reading, every 2 ms, and cost more than the rest of
the reading; it is now refreshed every 250 ms, and the readings no longer allocate pairs.

* Session: keep the library passes out of a game's launch

The redist seeder stamped each prefix with the checksum of the whole set of names, which differs
between the session's pass and the game launch's (the game's own names are added), so every
launch re-appended the markers to every prefix in the library while the game loaded. Each
prefix's marker now lists the names it was given and only the missing ones are added.

The beat's seed and compatibility passes, and the Lossless Scaling ownership probe (which loads
steamclient.so), also wait while a wineserver runs: a launch rewrites the manifest and made them
due at exactly that moment. The game's own launch seeds its prefix regardless.

* Agent: keep the focus watcher's X connection open while nothing changes

The connect timeout stayed on the socket, so with no property change the read timed out, and the
watcher dropped the connection, reconnected and took a fresh snapshot every few seconds.

* Game environment: start Cyberpunk 2077 without REDlauncher

The prelauncher opens REDlauncher, a Qt WebEngine window that hands over to the game half a
minute later and then stays up beside it, well over a core busy for as long as the game runs; its
own --launcher-skip started the game twice. The game's executable is started directly instead.

* netif: answer Wine's network driver from a reading of the link

Mortal Kombat X has Wine's network driver enumerate every interface, address and route table
hundreds of times a second. Each enumeration read /etc/droiddeck-net several times, asked the
kernel for its interface dump again (a netlink socket bound under proot, refused each time) and
looked the real functions up with dlsym. The link file is now read at most once a second, a
refused dump is not asked for again within that second, and the real functions are looked up
once.

* Fast path: create memfds without a stop in proot

proot looks at a memfd's name only to refuse the few that are then executed or locked; every other
memfd_create is now issued from the trampoline. The session's /proc/net and status copies made
one per read, a stop each. Without memfd in the kernel the call still goes to proot's ashmem.

* Logs: run each redaction rule only on a line that could match it

A session's end copies some 70 MB of the Steam client's logs and puts every line through all
twenty-odd rules, most of a minute of a core on the phone after every session. Each rule now runs
only on a line holding what it cannot match without: its keyword, the five separators of a MAC,
the four dashes of a GUID, a long enough hex or token run, the learned account or address text.
Lines with non-ASCII text still meet every case-insensitive rule. Over 895,000 lines of real
client logs, with the device's accounts and addresses learned, the output is identical and the
pass takes a twentieth of the time.
2026-10-10 19:00:33 -04:00
The412Banner 9b90386e73 Windows components: install from a recording of the installer's result (#495)
* Windows components: install from a recording of the installer's result

A catalog entry may name a 'snapshot': what its own setup program leaves in a prefix,
recorded once in Wine by winlator-contents' tools/snapshot/record.py (the files it places and
the registry values it writes, the self-registering DLLs' CLSID entries included). With one,
the setup program never runs here: the files come from the archive beside the recording, or
out of the vendor's installer by the paths the recording maps (small generated ones inline),
and the registry values go to registry.json for droiddeck-wincomponents to write at launch.
The steps a recording makes redundant are skipped; DLL overrides still apply. A component
with a recording counts as installable; its prerequisites must still be.

* droiddeck-msi-install --unpack: open archives nested inside an installer

QuickTime's cabinets and an NSIS pack's payloads sit inside the unpacked installer; they are
opened in place into '<name>.nested' folders, two levels deep, the same layout the component
recordings map their file sources to, so a recording's paths resolve on the device (QuickTime:
593 of 593).
2026-10-09 22:56:18 -04:00
MaxsTechReview fb8361b197 Expanded Fastpaths for proot and increased performance up to 57% (#494)
* perf: fast path resolves links, /proc and glue as proot does, and answers uname, isatty and passwd

The fast path handed back to proot whatever crossed a symlink, /proc or a directory proot
only shows as glue, which is most of what Steam and Wine ask. It now walks a path the way
proot's canonicalize() does, so those calls stay in-process:

- links are followed in guest terms and their text detranslated as detranslate_path() does,
  including readlink into a buffer the kernel cut short and /proc's exe, cwd and fd links;
- a binding proot dropped at start is dropped here too, glue above a binding is ENOENT, and a
  last component proot cannot stat is left to the kernel;
- pipe and socket dirfds are ENOTDIR, rmdir("dir/") removes dir, and "." and ".." go to proot;
- a blocking accept() with a connection already waiting no longer goes to proot.

Also answered: uname() and gethostname() (proot's utsname never changes), isatty() (glibc
2.43 asks with TCGETS2, which proot rewrites) and getpwnam/getpwuid when nsswitch.conf
sends passwd to files first and the entry is there (Xwayland asks for every client).

equiv.py, equiv2.py and equiv3.py match line for line with and without the fast path
(222, 507 and 924 lines). Per call on the RedMagic: realpath 240 us -> 1.0 us,
realpath /proc/self/fd/N 408 -> 9.9, getpwuid 41.5 -> 4.6, uname 28 -> 0.006.

* perf: LD_AUDIT module skips library lookups proot would fail

ld.so looks each library up along the game's search path, and Proton puts the game's
directory, Steam's runtime and video directories and its own library directories ahead of
/usr/lib: 72% of ld.so's opens in an Among Us launch failed, each a round trip to proot.

libblaudit.so answers la_objsearch() for a candidate proot would certainly fail with ENOENT
(its directory walked as canonicalize() walks it, the name or a directory on the way missing).
It has no libc and maps the fast path's trampoline itself. Each lookup's first candidate is
still opened, since a skipped one fails with ld.so's errno as it stands, and the default
directories are never skipped, so dlerror() reads the same. droiddeck-proton and the extra
wrapper add it to LD_AUDIT when the fast path is on.

* perf: droiddeck-proton checks a tool's components with one sha256sum

Each program the launcher starts pays a dozen traced library lookups under the game's search
path before it does anything. One sha256sum over every listed file replaces one per file;
the check itself is unchanged.

* perf: build a locale archive for C.UTF-8

Every program loads the locale LANG names before main(). glibc ships C.UTF-8 as a directory
it looks for once per category under two spellings, before reading gconv's module lists:
about 30 opens, each a stop in proot, in every process of the session. droiddeck-session
builds /usr/lib/locale/locale-archive (and gconv's cache) once per glibc package, so that is
one open.

localedef names a finished archive by hard link, which Android refuses; with
DROIDDECK_LINK_RENAME=1 libblsession turns a refused link into a rename that will not replace
an existing name.

* perf: library beat starts its helpers only when what they read changed

Every 15 s the session ran droiddeck-seed-redists (some forty programs under proot) and, when
a library directory had changed, steam-compatibility: a burst of thousands of proot stops each
quarter minute, game loads included. The seeder now runs when a library changed or a prefix
(or Proton's template for them) is unmarked, the compat pass when a manifest, depot, tool or
config.vdf changed, both checked from bash without starting anything, and each every five
minutes regardless. The seeder reads its stamp and the time without a subshell each.

* perf: fakeinput opens pad.log on its first line

Every process the library is loaded in opened the session's pad.log at start, a stop in proot
on shared storage, and most never write to it. The file is now opened when there is a line to
write.

* docs: the fast path as it ships, the audit module and measured launch times

* fix: a game the app launches after an idle spell comes to the front

The Steam client brings a game it launched forward only while it counts someone as present,
which it reads from gamescope's input counter. A game the app launched after four or more
minutes without a touch started, mapped its window, and stayed behind the library page until
the next input (device: Palworld, Stardew Valley, Fallout: New Vegas, Mortal Kombat X; the same
on main). The session now watches a requested launch, and when the game's window is focusable
but the interface keeps focus for two polls, counts one input on gamescope's counter, as a key
would. Nothing changes for a launch the client already brings forward.
2026-10-09 20:55:18 -04:00