* fix(desktop): video wallpapers no longer race ahead after DroidDeck returns from the background
* test: give the vrclient loader harness the clock syscall hook
* fix: a session in picture-in-picture draws at 30 fps instead of the full refresh
Since auto picture-in-picture became the default (#1727), pressing Home leaves the session running in a small window that takes no input. A game kept drawing at its full rate there: on a REDMAGIC Astra 2 Among Us in picture-in-picture drew 3.31 W, the same as playing it and about 1.05 W more than a suspended session. While in picture-in-picture the compositor now paces the session at 30 fps (or a lower limit already set). Mirroring to glasses keeps the glasses rate, and the display mode request ignores the picture-in-picture limit so the app in front is not slowed.
* fix: keep the no-argument output limit the glasses pacing tests read
* fix: hold scene renders to the output limit and keep frame generation off in picture-in-picture
A frame limit only paced dmabuf buffer releases, so a shared-memory client was still drawn on every vsync with its frame callbacks sent at the panel's rate. The vsync tick now waits until the limit's interval, less half a refresh, has passed since the last scene. Frame generation is disarmed while picture-in-picture is shown and armed again when it ends; frame generation requests are applied in order.
* Give the commit render harness the frame limit hold
* Hold scene renders to a frame limit deadline, also on the fallback timer, and keep frame generation for glasses mirroring in picture in picture
#1809 held Steam's own UI to an even share of the refresh near 60 fps whenever it had focus. On 120 Hz and faster screens Big Picture then felt locked at 60 while games ran at the full rate, and players reported it as a regression. The compositor now releases Steam UI buffers unpaced again, like a game's. The larger swapchain stays limited to games, so the client UI still uses gamescope's default image count.
* Warn when a drive used as a game library is linked at USB 2.0 speed
Reads the drive's USB link speed from sysfs through its mount, and shows a
dismissible warning with the USB generation, link speed and a tip for a
faster cable or drive. The warning returns after the drive is plugged in
again unless Don't show this again is switched on.
* Keep slow USB dismissals per plug-in across restarts and recheck after a dismiss
Dismissals are stored with the boot count and the USB bus and device number,
so they survive a process restart, end when that drive is plugged in again
even while the launcher is stopped, and never clear other drives. A dismiss
looks for the next slow drive, stale scans are dropped, and an unknown port
speed is no longer treated as a USB 2.0 port.
* Drop slow USB scans that a newer library or mount check has superseded
* Invalidate pending slow USB scans as soon as a media broadcast arrives
* Revalidate an open slow USB warning on every check and match raw mount library paths
Every check now rescans, so a warning that is already showing is replaced or
cleared when its drive is removed or the library changes. Library paths saved
under /mnt/media_rw are treated as their /storage volume.
* Keep the Don't show this again choice when a rescan closes the slow USB warning
* Save the slow USB opt-out before the launcher activity is torn down
The session HUD is FusionHUD (Bannerlator's HUD) with every reading taken from
the same source, and worked out the same way, as the MangoHud build that runs
Steam's performance overlay in a DroidDeck session.
- gamescope patch 0125 (gamescope-3.16.29-p19) shares the frame times that
mangoapp reads (one per signalled commit of connector 0) in a ring named by
DROIDDECK_HUD_FRAMES; the app reads it once per display frame and counts the
compositor's frames when gamescope sends none.
- MangoHud's rules: FPS over periods of at least 500 ms, frame time = 1000/FPS,
200-frame graph on a fixed 0-50 ms scale; CPU, GPU, temperatures, RAM, swap,
VRAM and battery from MangoHud's sources. Zones 22/26/28 are typed as GPU and
DDR sensors, so Steam's overlay CPU temperature no longer includes them.
- Five sizes in a panel shaped like the DroidDeck mark, with a centred header,
one left edge, neon outline and FPS; Minimal is the default size. Settings on
a new "Performance HUD" drawer page, with Bannerlator's options.
- The HUD reads sensors and polls frames only while it is drawn (not while
hidden, in picture-in-picture or behind another app), keeps its place after
picture-in-picture, and the diagnostics export has its own reader.
Device-tested on the AYANEO Pocket FIT: same readings as Steam's overlay side
by side in Dead Cells; the HUD updates in a game, hides in picture-in-picture
and comes back in place, no crashes.
Game and global component choices were written to desired.tsv only when a
selection changed, so a Proton build installed later (DroidDeck-Proton
11-11.8) had no rows and kept its bundled FEX. Battle.net's d2rfix FEX never
reached it and StarCraft died in ClientSdk.dll's DllMain. The choices are now
republished at session start and on Battle.net's FEX request whenever the
installed tools no longer match what was published.
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
* feat(input): support instant Back chords and tap timing
* fix(input): send QAM before shortcut inputs
* fix(input): stop delayed stick input on Back release
Adds a Performance mode switch under Mode settings > Frame rate, off by default and stored per mode like the frame limit. Off keeps today's behaviour. On:
- with no frame limit, the compositor hands buffers back to the game as soon as they are replaced instead of once per refresh, and gamescope's WSI layer is asked for at least 8 swapchain images; a chosen frame limit still paces
- DROIDDECK_WSI_BYPASS_CHECK_MS=100 lets gamescope's WSI layer reuse its present-time Xwayland bypass check (patch 0117, gamescope-3.16.29-p13); WINE_OFFSCREEN_CHECK_MS=100 does the same for winex11 once a DroidDeck-Proton release carries that fix. Off sets both to 0.
The gamescope pack now ships the patched WSI layer and SessionFiles stages it over the runtime's stock copy. Two per-game options, off by default: PROTON_DXVK_D3D8 and WINE_D3D_CONFIG renderer=vulkan|gl.
AIO Graphics Test on an AYANEO Pocket FIT (Adreno 750), off -> on: Vulkan 204 -> 1787, OpenGL 296 -> 2169, D3D12 308 -> 3563, D3D11 1133 -> 2874, D3D9 1253 -> 3098 fps; DiRT Showdown 92.2 -> 93.4 (GPU-bound).
Xbox Cloud Gaming: stream from the store and Games tab, native player with DroidDeck frame generation
Stream Xbox games with Xbox Cloud Gaming (Game Pass) from DroidDeck, outside
the Linux session.
- Backend: `xodus-cli cloud-token` (tools/xbox/droiddeck-cloud-token.patch)
gets the streaming tokens; they stay in memory.
- Web player (default): the Greenlight player page (tools/xcloud-player, MIT)
in a WebView, plus Microsoft's own xbox.com/play player. In-stream menu with
screen effects (sharpen, colour, deband, FXAA, CRT, NTSC, Toon, fps cap),
stream quality, performance overlay (level, layout, top right / top left)
and rumble.
- Native player (opt-in, Android 10+, Player engine: Native): Google's WebRTC
(io.github.webrtc-sdk 125.6422.07, BSD) with the Greenlight protocol ported
to Kotlin, in its own process (:xcloudnative) with its own instance of
DroidDeck's compositor. Decoded frames reach the compositor as
AHardwareBuffers (new stream mode, VK_ANDROID_external_memory_android_
hardware_buffer import), so DDFG 2x and LSFG 2x/3x/4x run on them. Live
frame generation, frame-rate target (presets and a 10-165 fps slider, even
pacing), zero-copy picture, small network buffer, fast decoder, instant
controller input, overlay with engine and on-screen fps, background end,
restart and web fallback. It takes the main process's tokens through
XboxCloudTokenService; they are fetched ahead while a cloud game is shown.
- The compositor requests the dma-buf import extensions only where the driver
has them (the system driver has none).
- Catalog: cloud availability, Game Pass plan CFQ7TTC0K6L8 counted, library
filter All / Owned / Game Pass / Cloud, Stream and Add to Games on the store
page, stream-only Games-tab entries (Stream + Download / Play + Stream).
- Xbox games get VC++ 2015-2022 and the ARM64 runtime registry entries
(vcredist2022_arm64, built in until the catalog has it) before each launch.
- Controller focus reaches pickers opened from a game page (install location,
uninstall); Add / Remove from Games keep the focus.
Credits: Greenlight by UnknownSKL (Jim Kroon), MIT, player and protocol;
Better xCloud for the resolution / OS mapping; MGamer404's Bannerlator #627
for the ARM64 runtime approach. Ported from the412banner's Bannerlator.
The content log was read with RandomAccessFile.readLine, one byte per read, on the main thread. A 4 MB log took about 2 s on the first poll, enough for an ANR on slower devices while a download runs. It is now read through a buffered reader with the same Latin-1 lines and offset, and the per-line regexes only run on lines that can match.