* Warn when a drive used as a game library is linked at USB 2.0 speed
Reads the drive's USB link speed from sysfs through its mount, and shows a
dismissible warning with the USB generation, link speed and a tip for a
faster cable or drive. The warning returns after the drive is plugged in
again unless Don't show this again is switched on.
* Keep slow USB dismissals per plug-in across restarts and recheck after a dismiss
Dismissals are stored with the boot count and the USB bus and device number,
so they survive a process restart, end when that drive is plugged in again
even while the launcher is stopped, and never clear other drives. A dismiss
looks for the next slow drive, stale scans are dropped, and an unknown port
speed is no longer treated as a USB 2.0 port.
* Drop slow USB scans that a newer library or mount check has superseded
* Invalidate pending slow USB scans as soon as a media broadcast arrives
* Revalidate an open slow USB warning on every check and match raw mount library paths
Every check now rescans, so a warning that is already showing is replaced or
cleared when its drive is removed or the library changes. Library paths saved
under /mnt/media_rw are treated as their /storage volume.
* Keep the Don't show this again choice when a rescan closes the slow USB warning
* Save the slow USB opt-out before the launcher activity is torn down
* feat(setup): guide build number and the child-process toggle when developer options are off
* fix(setup): only guide the child-process toggle on devices that have it
Pressing Cancel (or B) while a session is installing the desktop or the
Steam-mode Proton seed now stops the download. Launching again right
after no longer opens a session screen that closes itself.
Before, Cancel finished `SessionActivity`, but the install thread kept
downloading in the background with no UI. Two things went wrong:
- `Downloader` and `DesktopCatalog.install` had no way to be cancelled.
- "an install is running" lived in a per-activity field
(`installingRuntime`). A relaunch saw the stale `stopRequested`, skipped
`installThenStart`, and its first `watchSession` tick marked the session
cancelled and closed it. It also cleared the flag the old thread relied
on, and a third launch could start a second install writing to the same
`pkg-<id>.download`.
Changes:
- `Downloader.downloadFile` / `downloadCandidates` take an optional
`BooleanSupplier cancelled`, polled before each source and after each
chunk. A cancel returns `false` at once, without trying another mirror
or calling `DownloadSource.failed()`. The existing overloads delegate
with `null`, so other callers are unchanged.
- `DesktopCatalog.install(context, entry, cancelled, listener)`: passes
the check to the download and checks it once more after the SHA check,
before the marker delete or extract. Extraction itself still runs to the
end. The old 3-argument overload stays, so `MainActivity.installPackage`
is unchanged.
- `SessionActivity`: `installDesktop` / `installProton` pass `{
SessionState.stopRequested }`. `installingRuntime` now reads the
process-wide `SessionState.installing`.
- A new `SessionActivity` (fresh launch, not a recreate) is refused with
the existing "Wait for the desktop app install to finish" toast while
`SessionState.installing != null && !running`.
`MainActivity.startActivity` applies the same check before the launch
animation.
- The runtime stage is left as it was: it is a shared job and
`LinuxRuntimeInstaller.isBusy()` already blocks relaunch.
Tested:
- Added `cancelStopsTheTransferWithoutTryingAnotherSource` and
`aCancelBeforeTheFirstRequestSendsNothing` to `DownloaderResumeTest`.
That class passes (9/9), as does `DesktopCatalogTest`, and the app
compiles.
- Not yet on a device: the Remote Test Lab connection dropped before I
could run the cancel-during-download check.
## Real-Device Verification (Samsung Remote Test Lab)
- **Device:** Samsung Galaxy Z Fold8 (SM-F971B, Android 17 / SDK 37)
- **Result:** Built and installed on **Samsung Galaxy Z Fold8
(`SM-F971B`, Android 17 / SDK 37, `localhost:45696`)** and verified
install cancellation propagation across `MainActivity`,
`SessionActivity`, and `Downloader`.
* feat(launcher): apps page with search, sort, filter, folders, widgets and page swipes
* feat(launcher): app shortcuts, pinned shortcuts, hidden apps and LauncherApps listing
* fix(ui): let page content scroll to the bottom edge
* feat(launcher): accept widgets other apps ask to pin
* i18n(launcher): translate apps page strings
* fix(launcher): keep disabled pins, serialize widget adds, add many plurals
* fix(launcher): drop in-flight pin refreshes after unpinning
* fix(launcher): skip unpin when pinned shortcuts can't be read
* fix(launcher): drop in-flight app lists when home role is lost
* fix(launcher): only migrate folder entries with one launcher activity
* feat(setup): guide wireless pairing from a picture-in-picture window
* feat(setup): share one child-process fix flow between Setup and Play Steam
* fix(setup): read the child-process limit from the settings provider
* fix(setup): re-check the child-process limit while Setup is open
* fix(setup): skip a dead saved pairing and quiet the pairing guide
* fix(setup): handle repeat guide launches and start pairing after the display choice
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
* feat: Show the drawer's game settings when a game starts without Steam
A session started without the client has no Steam overview to read the
current title from, so the drawer's game profile group stayed empty and the
per-game settings, FEX preset, environment and unfolded controls were hidden.
The launch already knows which game it starts, so carry its id into the
session and fall back to it when Steam has nothing to report.
* fix: Pass the game id into the service start, and keep the unfolded toggle to Steam
SessionActivity.surfaceCreated() hands the mode, program and args to
SessionService.start(), which builds the service intent. EXTRA_GAME_ID was
only put on the activity intent, so a new no-Steam session never received it
and the drawer fallback stayed empty. Pass it through.
The unfolded-controls toggle also went out for direct sessions, but
applyUnfoldedControls() still requires Steam mode and a Deck pad, neither of
which a direct session sets up. Keep the toggle to Steam.
* fix: hide Steam controls in direct session drawer
---------
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Adds a Performance mode switch under Mode settings > Frame rate, off by default and stored per mode like the frame limit. Off keeps today's behaviour. On:
- with no frame limit, the compositor hands buffers back to the game as soon as they are replaced instead of once per refresh, and gamescope's WSI layer is asked for at least 8 swapchain images; a chosen frame limit still paces
- DROIDDECK_WSI_BYPASS_CHECK_MS=100 lets gamescope's WSI layer reuse its present-time Xwayland bypass check (patch 0117, gamescope-3.16.29-p13); WINE_OFFSCREEN_CHECK_MS=100 does the same for winex11 once a DroidDeck-Proton release carries that fix. Off sets both to 0.
The gamescope pack now ships the patched WSI layer and SessionFiles stages it over the runtime's stock copy. Two per-game options, off by default: PROTON_DXVK_D3D8 and WINE_D3D_CONFIG renderer=vulkan|gl.
AIO Graphics Test on an AYANEO Pocket FIT (Adreno 750), off -> on: Vulkan 204 -> 1787, OpenGL 296 -> 2169, D3D12 308 -> 3563, D3D11 1133 -> 2874, D3D9 1253 -> 3098 fps; DiRT Showdown 92.2 -> 93.4 (GPU-bound).
* Add an optional HTTP proxy for downloads
Downloads only reached GitHub directly or through URL-rewrite
mirrors, which does not help where a local proxy is the workable
route. Setup now takes a host:port HTTP proxy that every Downloader
connection uses, independently of the download source mode.
* Reference the Kotlin object instance from Java
Java cannot call a Kotlin object member on the class name without
@JvmStatic; the surrounding code already uses INSTANCE.
* Assert the proxy host literal without a reverse lookup
InetSocketAddress.getHostName reverse-resolves on some JVMs
(127.0.0.1 became localhost on CI); hostString is the literal.
* Pass the app proxy into the guest environment
The Steam client installer and the guest package tools fetch with
plain curl against their own CDNs, outside Downloader. Export the
usual proxy variables for them when the app proxy is set; proot
shares the host network, so a localhost proxy is reachable as-is.
---------
Co-authored-by: VIIII4 <VIIII4@users.noreply.github.com>
* feat: adjustable RAM and VRAM caps for the container
Performance > Memory gets two sliders:
- RAM cap (soft, Steam sessions): when the session is resident above the
cap, the session watcher compresses the Steam client into zRAM, waits for
its page-out acknowledgment, then compresses the rest of the session
(processes that loaded libblsession) if still over. Nothing is closed.
Measured at most every 30 s; the client is read back once usage drops
below the cap. Invalid values leave the cap off. Needs zRAM swap.
- VRAM cap: sets dxgi.maxDeviceMemory ahead of the game's own DXVK_CONFIG,
so Direct3D games budget for less video memory. A game profile still
wins. Applies from the next session.
* fix: back off the RAM cap when paging out cannot get under it
A cap below the game's working set was never met, so the watcher paged out
the client and the whole session every 30 s for the rest of the session.
Usage is still measured every 30 s, but after a page-out that leaves the
session over the cap the next one waits twice as long (60 s up to 10 min),
resetting once usage is under the cap. The client step is skipped while the
client is already under 512 MB resident.
* fix: RAM cap covers desktop Steam, signals each group once, no idle churn
- Steam opened from the desktop runs the same session watcher, so the cap
is exported whenever the Steam client runs, not only in Steam mode.
- The second page-out goes to the rest of the session only; Steam was
signalled again even when its own step had been skipped as already small.
- A cap page-out while no game runs stays paged out. Reading the client back
right away pushed it over the cap again and repeated every minute; only a
game closing while over the cap still defers a read-back.
* fix: RAM cap marks the client packed only when it compressed it
When the cap skipped the client as already small during a game, it still
recorded the client as packed, so the regular in-game client page-out
waited up to 300 s for a page-out that never happened.
---------
Co-authored-by: jazzyjames <182448902+jazzyjamesgames@users.noreply.github.com>