* Add VITURE glasses support: hardware control, 3D, head tracking
Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.
* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs
* Hang the glasses Settings lip over the top of the button
* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses
* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top
* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad
* Let the pad hands reach a metre out so buttons with deep colliders press
* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters
* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad
* Glasses: SteamVR field of view defaults to 90°
* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand
* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's
* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam
* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end
* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs
* Harden VITURE stereo negotiation and output refresh tracking
* Localize stereo recovery feedback and record Astra reconnect tests
* Improve test failure diagnostics and refresh Astra firmware findings
* Handle VITURE docks separately and reject truncated USB frames
* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes
- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
model, so Play SteamVR no longer blacks out the glasses after every restart;
Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
retries a failed first swapchain
- Dead strings and helpers removed; docs updated
* Glasses: drop USB frames with a bad checksum
* Glasses: count frames dropped for a bad checksum
* Feat/viture xr (#907)
* Add RayNeo Air and GT support to the XR glasses pipeline
* Add RayNeo Air and GT support to the XR glasses pipeline
* Checkpoint glasses tracking, calibration, and SteamVR launch integration
* Checkpoint glasses tracking, calibration, and SteamVR launch integration
* Add XREAL 1S support and correct GT and Pro 2 tracking
* Add XREAL 1S support and correct GT and Pro 2 tracking
* Fix mirrored glasses tracking and recover SteamVR after device loss
* Fix mirrored glasses tracking and recover SteamVR after device loss
* Document confirmed XREAL 1S brightness control
* Document confirmed XREAL 1S brightness control
* Fix SteamVR glasses defaults and rendering controls
* Fix SteamVR glasses defaults and rendering controls
* chore: keep only the 3 newest session log folders (#852)
* chore: add agent comment rules (#748)
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* Fix SteamVR polling, VITURE checksums, and fence tracking
Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.
Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.
* Fix SteamVR polling, VITURE checksums, and fence tracking
Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.
Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.
* fix: wireless ADB page names the child-process switch the way Android shows it (#848)
* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)
* l10n: refresh stale and untranslated strings in es, fr, ko, ru
- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.
Machine-assisted translation; native-speaker review is welcome.
* l10n(es): say registro, not grabación, for the missing installer record
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* fix: a failed cloud save recovery no longer ends the app (#846)
The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
* fix: an interrupted Linux runtime download resumes instead of starting again (#847)
* fix: an interrupted Linux runtime download resumes instead of starting again
installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.
* test: Downloader resumes a cut-off download from the bytes it kept
Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.
* fix: a resumed download discards a 206 that does not start where the kept bytes end
Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.
Adds a test with a server that answers the Range request from offset 0.
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)
* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings
Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.
* l10n: correct missing active swap translations
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)
fix: droiddeckctl reaches builds shipped under a variant package
The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)
feat: droiddeckctl pacing reports the frames that reached the screen
Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
* fix: Steam can restart more than twice in a session (#754)
* fix: Steam can restart more than twice in a session
Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.
* fix: measure the client's run time as it exits
The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.
---------
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
* fix: the front end keeps its page when the Fold is folded or unfolded (#832)
* fix: the front end keeps its page when the Fold is folded or unfolded
MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.
* fix: store login keeps rebuilding its toolbar when the display density changes
StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.
---------
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
* Release pointer buttons without replaying stale motion (#803)
* Fix cursor warping on native touch down
* Preserve input cleanup without replaying stale pointer motion
---------
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)
* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)
The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).
Also fix four Hong Kong strings that kept the simplified 着色器.
* l10n(zh): fix stale and ambiguous strings found in review
Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.
Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.
* l10n(ja): fix stale and ambiguous strings found in review
---------
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* Rebuild and verify Windows VR runtime components
* Rebuild and verify Windows VR runtime components
* Add top, bottom, and centered picture positions for Steam sessions (#871)
* fix: dependency scan ignores folders above the game folder (#859)
* DroidDeck-Proton: get releases from the Droid-Deck org repo
DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.
* feat: low-latency controller and touch toggles in the session drawer (#808)
* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)
* feat: Steam home wall fills from the signed-in library instead of store picks (#878)
* test: cover GPU family and support classification (#880)
* Fix local builds on Linux failing after the first Comet build (#866)
* feat: sort the store library and installed tabs, and switch between card and list views (#798)
* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)
* fix: keep Quest-patched Turnip as the auto default (#853)
* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)
* fix: keep proot sessions alive when the kernel loses fork events (#457)
* fix(quest): correct desktop and Steam display corruption across sessions (#733)
fix(quest): stabilize desktop and Steam layer presentation
Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.
Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* fix: keep SteamVR syscall hooks and report Steam crashes (#905)
* fix: preserve SteamVR syscall hooks
* fix: report Steam crashes through gamescope
* fix: honor glasses pacing and resolution in SteamVR launches
---------
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture
* Translate the glasses calibration, XREAL and SteamVR recovery strings
* SteamVR recovery: give a finished teardown time to collect logs before restarting
* Credit the projects the XR glasses support builds on
* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise
* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected
* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves
- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver
---------
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
fix(quest): stabilize desktop and Steam layer presentation
Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.
Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* fix: desktop session: Shift no longer stays held after typing capitals on a physical keyboard
Android repeats a held key as more key presses. Those were forwarded to the
session as more wl_keyboard presses, and KWin's xkb counts every press of a
modifier, so Shift held for a few capitals took several presses and one
release and stayed held: digits typed !@#, letters stayed capital. The same
applied to Ctrl and Alt.
- the compositor no longer sends a press for a key that is already down;
releases always go through (clients repeat keys themselves from the
repeat_info it already sends)
- the app stops forwarding Android's repeat events for keyboard keys
Reported by whatsupbros with a Keychron Q7 over USB - thank you.
* Remove stale comments from statx patch
---------
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
* feat: add Cardboard mode with side-by-side lens-distorted eyes and 3DoF head tracking
* fix: derive the Cardboard field of view from the panel and recentre fully when far from upright
* feat: share the Cardboard head pose with the guest and add a SteamVR driver for it
* feat: run SteamVR's compositor on Turnip/KGSL with a display-extension layer and a driver-direct HMD
* feat: show SteamVR frames in Cardboard mode through a driver-side presenter and a fake direct-mode display
* feat: install and start SteamVR for Cardboard mode from the session drawer
* docs: describe Cardboard mode and the SteamVR path
* feat: drive SteamVR hands from the game pad and keep the Cardboard headset out of standby
* docs: record where the SteamVR dashboard stops
* fix: map Cardboard head tracking to the screen's axes and keep turns about the real vertical as yaw
* fix: give Cardboard its previous picture back when SteamVR stops
* fix: report sem_otime from emulated SysV semaphores so SteamVR's web helper can start
* fix: bridge SteamVR's shared semaphores across processes and keep Steam alive while SteamVR runs
* feat: present SteamVR straight to DroidDeck's compositor at panel resolution
* docs: update Cardboard VR notes for the dashboard, semaphore bridge and direct presenter
* fix: keep Wine and FEX signal handlers in the VR layer; add semaphore tracing
* fix: clear a stale SteamVR active marker on status
* fix: clear only an old SteamVR active marker
* fix: unblock SteamVR clients on Turnip and keep Steam's web helper alive across SteamVR runs
* fix: judge shared waits before a submit's own signals and on Vulkan 1.0 devices
* docs: record VR games, SteamVR Home and OpenXR results on the Thor
* docs: add Cardboard VR learnings from the Thor bring-up
* docs: add Cardboard VR screenshots from the Thor
* fix: keep the VR layer's display stand-in to SteamVR runs and clear a leftover marker at session start
* fix: report SteamVR start and stop failures from the helper's exit code
* Front end: draw the capsule wall without clipping it every frame
The tilted wall clipped each capsule to a rounded rect and recomposed its columns on every drift
step, and a rotated rounded clip is rasterised in software on the render threads: the idle main
page held about 1.7 cores. The art is now loaded at the capsule's size with its corners already
rounded, each column draws its capsules itself in one layer moved by the drift, and the drift
advances at most every 15 ms. The idle page takes about a third of a core.
* libfakeinput: let calls on descriptors it does not serve skip its lock
Every read, write, ioctl, close and poll of every process in a Proton session went through the
controller lock and the three map lookups, Wine's wineserver pipes and the game's files alike.
A bitmap of the descriptors the maps hold, set before one is handed out and cleared when it is
closed, lets everything else go straight to the kernel.
* Pad motion: ask the display for its rotation four times a second
The rotation was looked up for every sensor reading, every 2 ms, and cost more than the rest of
the reading; it is now refreshed every 250 ms, and the readings no longer allocate pairs.
* Session: keep the library passes out of a game's launch
The redist seeder stamped each prefix with the checksum of the whole set of names, which differs
between the session's pass and the game launch's (the game's own names are added), so every
launch re-appended the markers to every prefix in the library while the game loaded. Each
prefix's marker now lists the names it was given and only the missing ones are added.
The beat's seed and compatibility passes, and the Lossless Scaling ownership probe (which loads
steamclient.so), also wait while a wineserver runs: a launch rewrites the manifest and made them
due at exactly that moment. The game's own launch seeds its prefix regardless.
* Agent: keep the focus watcher's X connection open while nothing changes
The connect timeout stayed on the socket, so with no property change the read timed out, and the
watcher dropped the connection, reconnected and took a fresh snapshot every few seconds.
* Game environment: start Cyberpunk 2077 without REDlauncher
The prelauncher opens REDlauncher, a Qt WebEngine window that hands over to the game half a
minute later and then stays up beside it, well over a core busy for as long as the game runs; its
own --launcher-skip started the game twice. The game's executable is started directly instead.
* netif: answer Wine's network driver from a reading of the link
Mortal Kombat X has Wine's network driver enumerate every interface, address and route table
hundreds of times a second. Each enumeration read /etc/droiddeck-net several times, asked the
kernel for its interface dump again (a netlink socket bound under proot, refused each time) and
looked the real functions up with dlsym. The link file is now read at most once a second, a
refused dump is not asked for again within that second, and the real functions are looked up
once.
* Fast path: create memfds without a stop in proot
proot looks at a memfd's name only to refuse the few that are then executed or locked; every other
memfd_create is now issued from the trampoline. The session's /proc/net and status copies made
one per read, a stop each. Without memfd in the kernel the call still goes to proot's ashmem.
* Logs: run each redaction rule only on a line that could match it
A session's end copies some 70 MB of the Steam client's logs and puts every line through all
twenty-odd rules, most of a minute of a core on the phone after every session. Each rule now runs
only on a line holding what it cannot match without: its keyword, the five separators of a MAC,
the four dashes of a GUID, a long enough hex or token run, the learned account or address text.
Lines with non-ASCII text still meet every case-insensitive rule. Over 895,000 lines of real
client logs, with the device's accounts and addresses learned, the output is identical and the
pass takes a twentieth of the time.
perf: only read the phone's motion sensors when Steam wants them
The gyro and accelerometer ran at 4 ms for the whole session, even in games without gyro, costing about 6% of a core. Steam already tells the Deck pad when it wants motion (setting 48), so libfakeinput now passes that on and PadMotion follows it, with a short delay to ride out Steam's brief toggles.
Fix JNI local reference leak in createSubprocess
The argv and envp loops took one local reference per element from
GetObjectArrayElement and never released it, so the references piled up
until the native call returned. ART aborts the process at 512 local
references ("local reference table overflow"), and both loops share the
table, so a long argument list plus a large environment could hit it.
Delete each element's local reference once its chars are copied and
released, after ReleaseStringUTFChars since the chars depend on the string.
Also release the cwd chars against cwd rather than cmd; the call passed
the wrong jstring.
Adds a host-side test that runs termux.c against a mock JNIEnv that counts
local references and checks release pairing. It needs a jni.h (JNI_INCLUDE,
JAVA_HOME or the NDK) and skips without one.
Fixes#507
* feat: Steam's touch controller as on-screen controls (beta)
* fix: Steam touch controls appear once the session makes the device; tidier default layout
* fix: Steam touch layout decoding, saved layouts and new sessions
* docs: Steam's touch controls
* feat: Steam's touch icons, labels and colours on the touch controls; pick and save them like Steam
* feat: Steam touch icon picker as in-session panels; layout colour; docs
* Give each physical controller its own player slot
Every controller fed the one exported pad, so two pads played as one.
The first controller keeps slot 0 (the Deck in a Steam session); further
ones get slots 1-3 as separate Xbox 360 pads, created on first input and
removed on disconnect. In Deck mode only the Steam client sees those
pads and hands them to games through Steam Input. Rumble follows the
slot it names.
* feat: Steam Link's touch menu, per-game input modes, action set editing, add/copy/paste, oval controls, paste control
* feat: Steam touch controls drawn as Steam Link draws them; Steam Link's touch menu and layout tray
* feat: Steam touch controls in DroidDeck's style, D-mark guide button, shake to hide
* refactor: Steam touch controls become an On-screen controls choice instead of a second dropdown
---------
Co-authored-by: maxjivi05 <maxjividen@gmail.com>
* perf: fast path resolves links, /proc and glue as proot does, and answers uname, isatty and passwd
The fast path handed back to proot whatever crossed a symlink, /proc or a directory proot
only shows as glue, which is most of what Steam and Wine ask. It now walks a path the way
proot's canonicalize() does, so those calls stay in-process:
- links are followed in guest terms and their text detranslated as detranslate_path() does,
including readlink into a buffer the kernel cut short and /proc's exe, cwd and fd links;
- a binding proot dropped at start is dropped here too, glue above a binding is ENOENT, and a
last component proot cannot stat is left to the kernel;
- pipe and socket dirfds are ENOTDIR, rmdir("dir/") removes dir, and "." and ".." go to proot;
- a blocking accept() with a connection already waiting no longer goes to proot.
Also answered: uname() and gethostname() (proot's utsname never changes), isatty() (glibc
2.43 asks with TCGETS2, which proot rewrites) and getpwnam/getpwuid when nsswitch.conf
sends passwd to files first and the entry is there (Xwayland asks for every client).
equiv.py, equiv2.py and equiv3.py match line for line with and without the fast path
(222, 507 and 924 lines). Per call on the RedMagic: realpath 240 us -> 1.0 us,
realpath /proc/self/fd/N 408 -> 9.9, getpwuid 41.5 -> 4.6, uname 28 -> 0.006.
* perf: LD_AUDIT module skips library lookups proot would fail
ld.so looks each library up along the game's search path, and Proton puts the game's
directory, Steam's runtime and video directories and its own library directories ahead of
/usr/lib: 72% of ld.so's opens in an Among Us launch failed, each a round trip to proot.
libblaudit.so answers la_objsearch() for a candidate proot would certainly fail with ENOENT
(its directory walked as canonicalize() walks it, the name or a directory on the way missing).
It has no libc and maps the fast path's trampoline itself. Each lookup's first candidate is
still opened, since a skipped one fails with ld.so's errno as it stands, and the default
directories are never skipped, so dlerror() reads the same. droiddeck-proton and the extra
wrapper add it to LD_AUDIT when the fast path is on.
* perf: droiddeck-proton checks a tool's components with one sha256sum
Each program the launcher starts pays a dozen traced library lookups under the game's search
path before it does anything. One sha256sum over every listed file replaces one per file;
the check itself is unchanged.
* perf: build a locale archive for C.UTF-8
Every program loads the locale LANG names before main(). glibc ships C.UTF-8 as a directory
it looks for once per category under two spellings, before reading gconv's module lists:
about 30 opens, each a stop in proot, in every process of the session. droiddeck-session
builds /usr/lib/locale/locale-archive (and gconv's cache) once per glibc package, so that is
one open.
localedef names a finished archive by hard link, which Android refuses; with
DROIDDECK_LINK_RENAME=1 libblsession turns a refused link into a rename that will not replace
an existing name.
* perf: library beat starts its helpers only when what they read changed
Every 15 s the session ran droiddeck-seed-redists (some forty programs under proot) and, when
a library directory had changed, steam-compatibility: a burst of thousands of proot stops each
quarter minute, game loads included. The seeder now runs when a library changed or a prefix
(or Proton's template for them) is unmarked, the compat pass when a manifest, depot, tool or
config.vdf changed, both checked from bash without starting anything, and each every five
minutes regardless. The seeder reads its stamp and the time without a subshell each.
* perf: fakeinput opens pad.log on its first line
Every process the library is loaded in opened the session's pad.log at start, a stop in proot
on shared storage, and most never write to it. The file is now opened when there is a line to
write.
* docs: the fast path as it ships, the audit module and measured launch times
* fix: a game the app launches after an idle spell comes to the front
The Steam client brings a game it launched forward only while it counts someone as present,
which it reads from gamescope's input counter. A game the app launched after four or more
minutes without a touch started, mapped its window, and stayed behind the library page until
the next input (device: Palworld, Stardew Valley, Fallout: New Vegas, Mortal Kombat X; the same
on main). The session now watches a requested launch, and when the game's window is focusable
but the interface keeps focus for two polls, counts one input on gamescope's counter, as a key
would. Nothing changes for a launch the client already brings forward.
* feat: replace the LXQt desktop with SteamOS-style KDE Plasma
* feat: leaving the KDE desktop logs out through Plasma and returns to gaming mode
* feat: DroidDeck logo wallpaper as the KDE desktop default
* feat: build the KDE wallpaper from the DroidDeck mark artwork
* ci: keep the built desktop package as a short-lived artifact for device testing
* fix: the desktop loading screen no longer promises Steam on the desktop
* docs: the output resize comments name the desktop's KWin
* fix: the desktop package verifies every package's Arch Linux ARM signature and never replaces a published tag
* fix: programs sent to the GPU from the desktop drop its software rendering overrides
* fix: an interrupted desktop install no longer counts as installed
* feat: pin the desktop package to its DroidDeck-Components release instead of the catalog
* Device details on the GPU card, and the Adreno model when the kernel leaves it out
The Components page called an AYANEO Pocket FIT (Adreno 750) "Adreno"
and warned it was "Below tested hardware (Adreno 725 and newer)": its
kernel names the GPU "Adreno33v2", GpuInfo wanted three digits, and the
SoC model is blank. When KGSL's name has no model, take it from the
phone's Vulkan driver (once this process has asked it) or from the
platform code name (pineapple -> 750, kalama -> 740, sun -> 830, ...).
The GPU card now opens with a tap or A onto the device's details,
gathered once off the main thread (DeviceInfo): SoC (maker, model,
platform, soc0 id), GPU (model and where it came from, the kernel's
name, clock, load, temperature, support), CPU clusters, memory, system,
the phone's own Vulkan driver - device, API, driver version and build,
conformance, limits, the extensions DXVK and VKD3D lean on, Android's
certified version and level - and the drivers DroidDeck uses. A button
copies it all for a bug report; each section takes pad focus so the
d-pad walks the list.
Vulkan is asked through a new small native library (deviceinfo,
vkinfo.c) that opens the system loader with dlopen and keeps nothing
open.
* Device details: the chip's model and name, CPU clusters, GPU clock range
Ideas from ClusterTune (GPL-2.0, its approach, not its code), which
tunes clocks on AYN, Retroid and other handhelds:
- The SoC model is read where vendors put it - ro.soc.model,
ro.vendor.qti.soc_model, Android's SOC_MODEL, ro.fota.platform (unless
it is a branch name like "MSM_13.0") - since handhelds often leave
Android's blank (Pocket FIT: SG8350P).
- SocNames names it: model codes we are sure of (QCS8550 -> Snapdragon
8 Gen 2, SM8750 -> Snapdragon 8 Elite, ...), else the platform as a
family (pineapple -> "Snapdragon 8 Gen 3 family"). The GPU card's
subtitle shows it: "Snapdragon 8 Gen 3 family (SG8350P)".
- CPU clusters come from the cpufreq policies (the cores each covers,
min-max speed) rather than grouping cores by top speed.
- GPU clock range from KGSL's step list, or a devfreq GPU node on
non-Adreno chips (Mali), not only the top clock.
* Device details: drop Qualcomm's own "Driver Build:" label from the driver build line
---------
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
* Make the Compatible Proton ARM64 the default and label compatible builds
The CompatToolMapping "0" default always points at DroidDeck's Proton
ARM64 tool, and per-game picks of adopted GE/CachyOS builds are kept,
including when the shortcuts writer remaps.
The tool is named after the Proton build it runs, Proton Experimental
ARM64 (Compatible), or Proton 11.0 ARM64 (Compatible) once that newer build
is installed. Adopted builds carry the same Compatible mark, read from a
string resource the app stages into the runtime, and the Proton page
explains which builds have the prefix fixes.
The registrar is renamed steam-compatibility and the tool
droiddeck-proton-arm64. Existing installs migrate on the next session: the
old tool directory is removed, every mapping that named it moves to the new
tool, and the retired bannerlator-steam-compat script is removed from the
runtime. CI and local packaging include the renamed script.
* Drop the duplicate R import left by merging main
* Add userspace ntsync for Proton on Android
Android kernels have no /dev/ntsync and its app policy refuses futex_waitv,
so every Proton 11 build here fell back to wineserver for every wait.
libblsession now serves /dev/ntsync itself: wineserver opens a memfd region,
each sync object is a timerfd that carries its slot, and the kernel ntsync
ioctls are answered in shared memory with futexes, following the kernel
driver's wake order. Valve's Proton Experimental ARM64, GE-Proton and
proton-cachyos use it unchanged.
Locks record their owner so a killed process cannot wedge the others,
signals are held off inside each critical section, dead processes and
exiting threads are swept, and object lifetimes follow close, dup2, dup3,
close_range and received descriptors.
Fast sync is on by default under Performance > Session fixes, and
PROTON_NO_NTSYNC=1 turns it off per game.
* Add droiddeck-esync as the default sync for Proton on Android
Without a kernel ntsync driver, Proton 11 builds here fell back to
wineserver for every wait. droiddeck-esync brings eventfd and shared-memory
sync to the exact Proton build a game runs on: a pack holds that build's
ntdll.so and wineserver with the patch series in tools/droiddeck-esync
applied, and the guest runs Proton from a shadow tree that links the stock
tool and swaps in those two files. A wineserver from a pack still prefers
/dev/ntsync when a kernel driver or droiddeck-ntsync is there.
Packs are built in Valve's SDK image from each release's own wine source
(Proton Experimental ARM64 tags, GE-Proton and proton-cachyos releases); the
control build must reproduce the release binaries byte for byte, and a
signed index lists the packs. The APK bundles the packs pinned in
release.env, the app fetches newer ones, and Steam's compatibility tool
picks the pack for each Proton build, so new Proton releases get packs
without an app update.
The ntdll side reads, writes and polls its eventfds with raw system calls,
so the guest's LD_PRELOAD wrappers stay out of the sync path. The server
abandons a mutex once a thread killed by TerminateThread has really exited
and when its process dies, and a mutex's owner and recursion count change
in one atomic step, so a killed owner cannot touch the next owner's count.
droiddeck-esync is on by default and PROTON_NO_ESYNC=1 turns it off per
game; droiddeck-ntsync, the userspace ntsync, is now an opt-in toggle.
* Watch Valve's Proton releases and build droiddeck-esync packs for them
A scheduled workflow reads the Proton ARM64 builds Steam ships (anonymous
steamcmd app info) and the upstream source tags, compares them with the
previous watch state and starts the pack build for any build that has no
pack yet. The pack build applies the patch series with --fuzz=0 and runs a
smoke test of each new pack against the esstress suite before it is
published.
* Add droiddeck-fsync, keep Steam and the app on one Proton, fix DirectAudio
droiddeck-fsync: libblsession answers futex_waitv(2), which the app
sandbox refuses, in userspace, so Proton's own fsync runs on the stock
Proton files with no pack. Waiters register the words they wait on in a
table beside the fsync shared memory and sleep on a futex of their own;
FUTEX_WAKE on the fsync memory wakes the registered waiters. Slots carry
one owner word that the sweeper and the owner claim with a CAS, and the
mapping table is rebuilt under a lock held across the real munmap, so a
reused address or a recycled slot cannot lose a waiter. It stands in for
a Proton build without a pack (droiddeck-ntsync where fsync is off), takes
over for games with esync off, and the "droiddeck-fsync first" toggle
(BL_FSYNC_FIRST, also per game) puts it ahead of the packs. The games
Proton keeps off fsync and esync never get it. A launch into a prefix
whose wineserver is still running keeps that server's sync choice.
One Proton for Steam and the app: the Components page's Proton is the
default Steam uses, applied live through the client while Steam runs
(droiddeck-steam-compat) and at the next start otherwise; a choice made in
Steam's menu comes back to the app. Requests are ordered by a sequence that
never goes backwards, and the page no longer jumps back to the default
after a swap or restore.
DirectAudio: the wrapper wrote the driver key with its backslashes
stripped, so no game ever used DirectAudio. Wine 11 also loads a builtin
only from the prefix, so the driver is now linked into system32 and
syswow64 before "directaudio,pulse" is selected; mmdevapi falls back to
winepulse whenever DirectAudio cannot start.
* Pick esync, ntsync or fsync from the Steam settings' Games group
A three-way tab row above the FEX preset sets the sync Proton games use. It
writes the existing switches together (droiddeck-ntsync, droiddeck-fsync
first, droiddeck-esync), so the Performance toggles and the tabs always agree,
starts on esync and keeps the choice until it is changed again.
* Make droiddeck-fsync the default sync for Proton games
A fresh install, or one that never picked a sync, starts on fsync; a choice made
in the Steam settings' Games group still sticks. Games Proton keeps off fsync
still fall back to droiddeck-esync.
* Add wineserver to the Wine sync tabs and order them ntsync, fsync, esync, wineserver
wineserver turns every in-process sync off so games wait through wineserver;
picking any other tab turns sync back on. The tabs shrink to fit a narrow pane.
* Shorten the Wine sync description
* Answer openat2 and execveat for FEX in the session preload
FEX opens every file of its x86 rootfs with openat2(RESOLVE_IN_ROOT) and
only falls back to the host path on EXDEV. Under proot on Android openat2
answers ENOSYS, so each lookup of an x86 library silently went to the host
and missed. The exported syscall() now turns openat2 into openat once the
real call reports ENOSYS: RESOLVE_IN_ROOT paths are taken relative to the
root fd (FEX has already resolved the links inside the rootfs), and an
absolute path under RESOLVE_BENEATH fails with EXDEV as the kernel would.
execveat with an absolute path, or relative to AT_FDCWD, and without
AT_EMPTY_PATH or AT_SYMLINK_NOFOLLOW, is plain execve; it is sent as such
because proot refuses execveat with a directory fd, which FEX uses when it
re-executes itself for a child x86 program.
* Run x86 Linux games and programs through FEX
Steam: Linux-only titles that have no ARM64 build (from the client's
appinfo cache: type game, demo, application or beta) are mapped to a new
compatibility tool, droiddeck-fex ("Linux x86 (FEX)", linux to linux,
no required runtime). Valve's own "fex" tool needs pressure-vessel, which
cannot run under proot, so a mapping to it or to a Steam Linux Runtime is
replaced; any other pick the user made stays. Titles that also ship for
Windows stay on Proton. When such a title is installed and FEX or the
sniper runtime is missing, the client is asked to install them.
droiddeck-fex runs the program under the FEX that Steam installs (app
3127680), with Steam Linux Runtime 3.0 (sniper, app 1628350) as the x86
rootfs:
- the sniper platform is linked in place from its usr-mtree (relative
links only, files/usr -> .), once per runtime version;
- the x86_64 and i386 builds of libblsession and libfakeinput go into the
runtime's lib/<triplet>/droiddeck and its etc/ld.so.preload, mirroring
the session's own list, so x86 programs get the pads and the session
fixes (FEX passes their system calls straight to the kernel, so the
ARM64 preloads cannot reach them);
- Config.json sets RootFS and the GL and Vulkan thunks, so x86 games draw
with the device's Turnip and Mesa;
- the FEX preset and the game's own environment from the Steam settings
apply, and ARM64 entries are dropped from LD_PRELOAD/LD_LIBRARY_PATH.
It also links ~/.steam/sdk64 and sdk32 to the client's x86 steamclient
when the client has one and nothing is there yet.
Desktop: x86_64 and i386 AppImages can be imported now; they unpack
through FEX (or unsquashfs) and record their architecture. Scripts,
AppImages and programs started in a run session use FEX automatically
when they are x86, and each added app has a "Use FEX" Auto/On/Off choice
in its edit dialog. The launchers' "still running" checks also look at
FEX processes, whose exe is FEX rather than the program. A GitHub release
without an ARM64 AppImage falls back to its x86_64 one. Decky's x86
loader starts through droiddeck-fex instead of the fex-mesa rootfs path,
which no runtime ships.
The x86 preloads are built against glibc 2.31 (Debian 11) so they load
in sniper: tools/linuxfs/build-x86-preloads.sh, run in CI and by
build_local.sh. fakeinput's stat hooks fall back to __xstat on a glibc
without a stat export, and mmap64 takes off64_t for the i386 build.
* Keep a FEX unixlib from outliving its DLL
A FEX package or original bundle without the aarch64-unix helpers left
the previous version's libarm64ecfex.so / libwow64fex.so in the Proton,
so the new DLLs loaded a unixlib built for another FEX. A swap now removes
the helpers the package does not carry; FEX then runs DLL-only, which it
already falls back to when Wine cannot load the unixlib.
* Fix the Wine sync choices an audit found
- wineserver tab: it passed Proton's environment through, so a build with
esync built in (GE, cachyos) still ran esync and a kernel ntsync would
still be used. It now sets PROTON_NO_ESYNC, PROTON_NO_FSYNC and
PROTON_NO_NTSYNC (unless the game's own environment sets them).
- ntsync tab: a Proton whose wineserver has no /dev/ntsync client got
wineserver-only sync although fsync would work. The hash cache records
whether the wineserver has one; without it the launch goes to
droiddeck-fsync, and no stand-in or pack turns droiddeck-ntsync on.
- A build with esync built in returned before the per-game fallbacks, so
a game that turns esync off ran with no in-process sync. It now gets
droiddeck-fsync, or droiddeck-ntsync where fsync is off too.
- When a pack's proton cannot start and the stock one is used, or the
selection fails, the prefix's record now says stock, so a second
launch into the same running prefix no longer picks the pack's ntdll.
- droiddeck-fsync: its mutex is held across fork and re-made in the
child, a closed or replaced shm fd is forgotten (close, dup2, dup3,
close_range, closefrom), and a waiter woken while it was leaving on a
timeout or signal reports the wake instead of losing it.
- BL_SYNC_MIN_NOFILE applies per game to every verb, debug logs carry
prefixes.json, the device report names the chosen sync instead of the
three raw switches, and PATCHES.md and the proot notes describe the
selector, the fsync default and droiddeck-fsync's futex_waitv.
* Name the runtime's scripts and files droiddeck, migrating old installs
The guest scripts are droiddeck-* now (droiddeck-session and the other 19),
as are the files the app and scripts generate (etc/droiddeck, the network
state files, the components dir, the Steam install stamp, the redist marker,
the extra-Proton wrapper and backups) and the compositor's own names
(libdroiddeckwayland, droiddeck_* sources, DROIDDECK_* switches, the
wl_output and seat names).
Installed runtimes carry on: LegacyNames moves etc/bannerlator and
share/bannerlator over and leaves relative links at the old paths before
every proot command, turns any old script into a link to its new name,
moves the generated files and points menu entries at the new scripts.
The session scripts and steam-compatibility move their markers on first
use, the components dir's desired.tsv is rewritten with it, and the
runtime counts as installed under either session script.
Kept: the banner_ahb_v1/banner_desktop_v1 wire names and BANNER_AUDIO_DIRECT
(read by prebuilt Turnip and Wine builds), Banners-Turnip and other
third-party names, BL_* switches, libblsession, and credits to Bannerlator.
* Unpack x86 AppImages without FEX, then ask Steam for FEX
Importing an x86 AppImage failed when FEX was not installed yet ("needs FEX
to unpack and no unsquashfs is installed"). AppImages now unpack with
uruntime (VHSgunzo, MIT, v0.8.1 aarch64, pinned by sha256 and shipped
unmodified with its licence), which reads SquashFS and DwarFS images of any
architecture natively. FEX's own --appimage-extract and unsquashfs stay as
fallbacks, and an ARM64 image whose own runtime cannot unpack it goes the
same way.
An x86 import with FEX missing records that FEX is wanted, so the next
Steam session requests FEX and the Steam Linux Runtime, and the program's
page says FEX is not set up yet and how to get it.
* Run Vulkan Qt Quick AppImages on Wayland
OpenNOW (Qt 6.8, Qt Quick on Vulkan) closed within two seconds in a run
mode. The session sends toolkits to gamescope's Xwayland, and Qt's xcb
backend only presents with Vulkan when Mesa's X11 WSI does, which needs
DRI3; Xwayland on KGSL has none, so Qt found no queue that can present and
aborted ("Failed to create RHI").
An AppImage that bundles Qt Quick, the Vulkan loader and Qt's Wayland
plugin now runs on gamescope's Wayland socket (the desktop's, outside
gamescope), where Turnip presents as it does for games, with Qt's xcb
backend as the fallback. SDL_VIDEODRIVER and XDG_SESSION_TYPE follow, so
helpers that pick their window system from them (OpenNOW's streamer) agree
with Qt. Everything else stays on X11; a qt file in the app's directory
(wayland or xcb) overrides the choice.
* Keep gamescope's WSI layer away from Qt apps on its Wayland socket
OpenNOW still closed at once: its FFmpeg (the Raspberry Pi fork, libavutil
61) creates its Vulkan queues internally synchronized whenever the driver
offers VK_KHR_internally_synchronized_queues, which DD-Turnip does. The
gamescope WSI layer registers every queue of a new device through
vkGetDeviceQueue, which only returns queues created without flags, so it
got VK_NULL_HANDLE and vkroots aborted on assert(obj) before Qt opened a
window.
Programs that draw on gamescope's Wayland socket do not need the layer,
which only carries X11 windows past Xwayland, so it is turned off for
them. OpenNOW bundles no Vulkan loader (it reaches Vulkan through Qt and
dlopen), so a binary that uses QVulkanInstance counts as a Vulkan app too,
and a Qt Quick app left on X11 says why in the session log.
* Keep the end of the session log, and say when FEX is missing
The session sends its output through head -c into session.log. head
writes through stdio, so it held up to 4 KB that proot's --kill-on-exit
threw away when the guest ended: every log stopped mid-line at a 4096-byte
boundary, losing exactly the lines that say why a program quit (an x86
AppImage's "x86 Linux programs need FEX" among them). dd writes each read
as it comes and keeps the same cap.
A run mode always ends with status 0 (gamescope does not pass its child's
on), so a program that could not start just closed. When the log says FEX
is missing, the ended screen now says so and how to get it.
The app reads FEX's readiness from status.json, which only a launch or an
import wrote, so it still said "not set up" after Steam installed FEX.
droiddeck-fex status rewrites it, and a Steam session ends with it while
FEX is wanted. FEX is also looked for at the tool's root and under files/,
and a tool folder without it lists what it holds.
* Let FEX and its runtime install runnable on an SD card library
A Steam library on shared storage loses the executable bits, so native
tools are staged in private directories bound over it; only Proton and
SteamLinuxRuntime folders were. FEX (3127680) installed there could never
run, droiddeck-fex saw no FEX and kept asking Steam for it. FEX and the
sniper runtime (1628350) now get private directories from their first
download, whatever their install folder is called.
* Keep fsync off in the pack smoke test
A runner whose kernel allows futex_waitv started stock Proton with fsync,
so the server-side baseline never said what the test waits for and every
pack was waved through as untestable; the esync run would have measured
fsync too.
* Judge a pack against stock's own esstress failures
Stock Proton fails esstress's dup wait all under server-side sync as well
(a Wine bug, seen on the phone too), and any stock failure made the test
call the runner unusable. A pack now fails only when it crashes, hangs or
fails a check stock passes.
* Ask Steam for FEX and its runtime one at a time
Both steam://install requests were started together, and the running client
took only the first: FEX installed, the sniper runtime FEX needs never did.
Each request now waits for the client to take it before the next.
* Bundle the first published droiddeck-esync packs in the apk
* Log how an x86 program under FEX ends
FEX keeps its own errors quiet unless asked, so a program it could not run
left nothing in the session log. Its log now goes to stderr, and the AppImage
launcher records the program's exit status or the signal that ended it.
* Show the log a failed AppImage program wrote
Programs like Eden stop themselves on a failed check and say why only in
their own log under the home folder. When the program ends badly, the end of
any log it wrote during the run is copied into the session log.
* Report where an x86 program under FEX hit an illegal instruction
A tiny x86_64 preload, built without libc, catches SIGILL and writes the
address, the instruction bytes and the mapping they belong to before the
program dies as it would have. droiddeck-fex preloads it into x86_64 programs.
* Load the fault reporter from the x86 runtime
Programs under FEX look libraries up in the x86 runtime, so the reporter is
copied there with the other preloads and named by its path inside it.
* Hand FEX its x86 runtime and thunks through the environment
Valve's FEX runs portable and reads its config beside itself, so the
Config.json droiddeck-fex writes was not seen: programs ran without the
runtime. The runtime, thunk libraries and thunk list now also go in FEX's
own environment variables, and each launch says what it was given.
* Use the sync pack built for the installed Proton release
Some Proton releases ship byte-identical ntdll.so and wineserver (Valve
11.0-2b/2c, CachyOS 0702/0703), so a pack built for a newer release
matched an older install exactly and the older install never fetched its
own pack. A pack from a newer release no longer counts as an exact match;
among matches the one built for the installed version wins, then rev.
The app ranks the pack a tool already uses the same way and only fetches
a pack that ranks higher, reads the release epoch from tools.tsv and
refetches when tools.tsv changes. A prefix whose server is still running
re-checks its recorded pack on waitforexitandrun and starts fresh when a
better one now applies.
* Keep published sync packs and revocations consistent
The publish step never replaces a pack that has an entry beside it; a
pack left without its entry by an interrupted run is replaced so the
build stops repeating. Discovery counts revocations the signed index does
not show yet, including superseded packs only the flavor releases list,
so the index is signed again. The release watch always builds every
flavor.
* Fetch the droiddeck-esync packs from DroidDeck-Components
The packs, the signed index and the apk bundle now live in the releases
of Droid-Deck/DroidDeck-Components, together with the pipeline that
builds them, so this repository keeps only the app and the guest code
that consumes them. The app's index and asset URLs point there,
release.env names the repository its bundle comes from, and the apk
builds drop bundled packs that the published index revokes.
* Stop the apk build when the published sync index cannot be read
* Ask Steam for one FEX dependency at a time
The client shows a confirmation dialog for each steam://install, and a
second request replaces the first dialog, so FEX was never installed
when the runtime was requested right after it. The next dependency is
now requested once the previous one has an app manifest.
* Use generic names in the AppImage test fixtures
* Give x86-64 apps under FEX the Vulkan thunk
Apps that bring their own glibc and Vulkan loader skipped FEX's thunk
overlay and loaded their bundled desktop Mesa drivers, which crash on the
phone's GPU during Vulkan setup. droiddeck-fex now adds an x86-64 audit
module when a program's bundled glibc and libstdc++ meet the thunk's
version needs. The module sends libvulkan.so.1 lookups to a nodelete stub
that needs FEX's thunk path. That keeps the thunk mapped when an app
unloads Vulkan and loads it again, since FEX keeps its first trampoline
links and the old addresses get reused.
The fault reporter now restores the default action before re-raising,
because FEX ignores SA_RESETHAND and the handler looped.
With frame generation on, a scene drawn for another window (Steam's
overlay) went into the engine as a game frame. Adaptive counted it as
source rate and planned against that (36 base for a game capped at 30),
and a fixed multiplier gave it present slots while game frames were
dropped (26 -> 51 at 2x). Such a change now waits for the game's next
frame.
The HUD's base rate is the game window's own frames, as Steam's overlay
counts them, instead of the compositor's scene rate.
* perf: answer Turnip's zero-timeout KGSL timestamp polls without blocking
Turnip polls a timeline point with IOCTL_KGSL_DEVICE_WAITTIMESTAMP_CTXTID
and a timeout of 0, which KGSL reads as wait forever; Mesa does it under
a lock on every signalling submit, so vkd3d-proton, DXVK, gamescope and
Zink ran in lock-step with the GPU. The session preload now answers
those polls from the context's retired timestamp and passes everything
else to the kernel. Bannerlator measured a D3D12 demo at 614 -> 4335 fps
with the same answer in its Vulkan adapter. BL_NO_KGSL_POLL_FIX=1 turns
it off.
* perf: frame limiter, live panel refresh, opt-in GPU clock pin, cheaper cursor sync
- A per-mode frame limit (Steam and desktop settings, off by default):
gamescope's -r, the compositor's buffer-release pacer, the display
layer's frame-rate vote and a panel mode the cap divides evenly, as
WinNative's per-shortcut limit does. BL_FPS was always 0 and the
pacer's limit was never set.
- The compositor follows the panel's refresh rate when it changes
mid-session instead of reporting the rate read at start. (WinNative.)
- Performance > GPU: hold the Adreno clock at its top through KGSL's
power-control property, no root (Bannerlator's PerfGpuTurbo). Off by
default; cleared when the session stops and at the next app start if
a killed process left it set.
- The cursor image is copied across JNI only when its serial changes,
not on every pointer move.
* perf: stop re-seeding every prefix every 5 s, and run the library helpers only on change
- bannerlator-seed-redists stamped its change check from a block that
carried the current time, so it never matched: every prefix had ~32
keys appended to system.reg on every beat. The stamp now comes from
the names; Proton's prefix template is seeded too (date kept), with
WinNative's built-in list until the client has the install scripts.
- The library beat runs the seeder every 15 s and steam-compat only
when a directory it reads has changed, or once a minute.
- The client-core pin reads /proc itself and runs taskset -a only for
new processes or ones that grew threads.
- The games watcher backs off after a failed ownership probe and does
not probe while a game runs.
- The Proton launcher runs the newest ARM64 depot by build number, and
PROTON_USE_PIPEWIRE defaults to 0. (WinNative.)
* perf: Mesa's database shader cache, and proot's tracer above the guest
- MESA_DISK_CACHE_DATABASE=1 for the session: the file cache opens a
file per lookup and opens and renames one per store, each a proot
stop; the database is opened once and used with pread/pwrite.
- proot's single tracer thread is raised to nice -6 (under the
compositor's -8) two seconds after it starts, so the first guest
process it forks keeps nice 0. setpriority() directly, not
Process.setThreadPriority, which would also move its cgroup.
* feat(lsfg): take Lossless Scaling from Steam by itself, import it once owned, rebuild on update
- Lossless.kt owns the DLL and its shader cache. The copy the Steam
client installs (runtime library or the card's) is taken by itself
and taken again when the client updates it (size/mtime stamp). The
DLL is copied in and built into a cache named after its SHA-256, so
a new DLL hands the compositor a new path; a build that fails keeps
the working cache. Builds are serialized.
- The Steam session asks the signed-in client once per session whether
the account owns app 993090 until the answer is yes, then records it
and the app stops asking (BL_LOSSLESS_OWNED). Once owned, the frame
generation menu offers "Import Lossless.dll…", on the main screen and
in the session drawer; an import stays until Steam's copy changes.
- The compositor restarts the LSFG engine when its cache path changes,
and a new engine selection clears an earlier start failure, so an
updated DLL or a retry no longer needs the app restarted.
- The HUD says when LSFG is waiting on Lossless Scaling instead of
"starting"; frame generation strings are resources.
- Removed LsfgNative's unused DLL variant and cache-match calls.
* Find Lossless.dll in added Games libraries too
* LSFG: 120, 90 and 60 fps targets alongside 2x-4x
The pacer's target-rate mode picks 0-3 generations per game frame. While it
is warm the input ring and shared chain follow every frame, so frames that
generate nothing don't leave the next one without history.
* Credit LSFG: Camille LaVey / Eden, ported to WinNative and DroidDeck by @maxjivi05
* LSFG: aim 0.1 fps under the target so output never passes the refresh rate
* feat: stand in for /dev/uinput so Steam Input's virtual pads reach games
* feat: present the pad to the Steam client as a Steam Deck controller over hidraw
* docs: log the uinput stand-in and the Steam Deck controller
* feat: feed the handheld's gyro and accelerometer to the Steam Deck controller
* feat: let the Steam page choose between the Steam Deck controller and the Xbox 360 pad
* feat: Deck back grips and trackpads on the second screen
* fix: serialize ring teardown with its writers, fall back to the Xbox pad when the Deck cannot be set up, and read motion only for a Deck
* fix: keep the second screen's choice through sleep and bring it back on wake
A replaced buffer went straight back to a game with no frame limit, so a
MAILBOX/IMMEDIATE swapchain drew frames that were never shown; it now
comes back once per refresh as in WinNative. gamescope's -r and the
compositor read the rate of the mode the activity asked for rather than
the one the panel was still in, and the zero-copy layer votes it.
Sustained performance mode, which caps clocks on most power HALs, and
the ADPF session, which reported frame intervals as work, are gone.
The desktop forced a software cursor (WLR_NO_HARDWARE_CURSORS=1) because
labwc's cursor never showed when handed to the app's compositor. With a
software cursor wlroots never scans out: every frame of a full-screen game
was composited by labwc first ("Direct scan-out disabled by software
cursor", 2284 times in one Adreno 825 report).
Why the cursor never showed: wlroots' Wayland backend attaches and commits
its cursor surface before wl_pointer.set_cursor gives it the cursor role,
and sets it again with nothing new committed each time the pointer enters.
The compositor released a role-less surface's buffer on commit, so the
cursor surface had no image by the time it became the cursor.
- A role-less surface's last buffer (cursor-sized only) is held until the
next commit; set_cursor publishes it, and a repeat set_cursor of the
surface already shown unhides its last image.
- A dma-buf cursor is read back after the client's implicit render fence,
as the zero-copy path waits for it.
- The desktop no longer forces a software cursor.
Device-tested on the AYN Thor (Adreno 740, 1920x1080): labwc's own cursor
is drawn, with its shapes (I-beam over a terminal); wlroots logs "Direct
scan-out enabled" for a full-screen glxgears. At the same 60 fps on screen
the GPU is 3.0 % busy against 4.6 % with the software cursor, both at
550 MHz.
The compositor composed every surface with a blit, which replaces what is under it. gamescope's
Wayland backend hands its overlay and notification planes to the host as full-size translucent
subsurfaces, so a Steam toast, the Quick Access menu or Deck mode's performance overlay blacked
out what was beneath it.
Surfaces whose buffer has alpha and that are not declared opaque now go through an alpha pass
(premultiplied source-over); everything else, and any image the driver cannot sample, keeps the
blit. wl_surface.set_opaque_region is honoured, and only for programs that declare opaque regions
at all, so Wine windows with a meaningless alpha channel are drawn as before. On the SurfaceControl
path a translucent plane is never promoted to the game layer, and the overlay layer is marked
translucent when its plane is.
From WinNative (maxjivi05, feature/wayland-gamescope 69218fc; GPL-3.0), with the SurfaceControl
layer handling added.