Commit Graph
131 Commits
Author SHA1 Message Date
MaxsTechReview 1873a9aee7 fix: Steam client responds sooner and its sounds play on time (#1094)
- Pace the session at the rate the panel actually runs. When the system
  keeps a lower rate than the mode DroidDeck asked for (a vendor game
  assistant holding 120 Hz while 185 Hz was requested), gamescope,
  Xwayland and the compositor's presentation feedback were told 185 Hz,
  and Steam's interface drew every 10.8 ms out of step with the panel.
- Build the DirectAudio PulseAudio sink from source (LGPL-2.1-or-later,
  The412Banner/directaudio v1.1.0) with its max request kept to its ring
  target. Advertising 100 ms made PulseAudio grow every client's buffer
  to about 112 ms, so Steam's interface sounds played that late.
2026-10-18 19:26:26 -04:00
Kurt Himebauch 3acf5db3f6 fix: keep second-screen controls in their own activity (#1041) 2026-10-18 14:23:04 -04:00
+13 219548f4b6 Add app-wide 3DoF for VITURE, RayNeo and XREAL glasses and 6DoF for Luma Ultra (#1035)
* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Add experimental Luma tracking and stabilize SteamVR launches

Add native Luma Ultra spatial tracking, optical controllers, and stereo
calibration with DroidDeck styling, imperial/metric measurements, and
pending recenter recovery. Include the pinned hand model and calibration board.

Keep live guest and SDK files outside Android's evictable cache. Filter the
Adreno 840 sysmem override in the shared SteamVR helper, serialize timeline
mirroring, retain invalid optical controllers without event floods, and
prevent an unprivileged scheduling fallback from lowering compositor RTTIME.

Validation: latest APK build and runtime freshness checks pass; 247 affected
glasses/calibration tests pass. Native VR, helper, and packaging regressions
pass. Two earlier phone library launches sustained 60 fps for 308 and 188
seconds without recovery or restart. The newer calibration APK is installed
and checksum-verified; calibrated-hand and sustained gameplay acceptance
remain pending. One existing Android test requires Windows symlink privileges.

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

* Improve Luma Ultra tracking and isolate device-specific controls

Refine stereo hand and Joy-Con tracking, gesture release, calibration,
recovery UI, diagnostics, display modes, and compositor handling.
Keep Ultra controls and input routing behind a live SDK-confirmed Carina
connection; clear retained spatial mode when other glasses connect.
Add optional UVC transport with pinned dependencies and packaged notices.

Validation: 456 Android tests, ARM64 VR build and native regressions,
47 tooling tests, SDK/UVC-enabled and disabled builds, and 150 packaged
runtime checksums. Two shader compilation tests skipped because the
compiler is unavailable. Hardware interaction gates remain experimental.

* Delay Luma Ultra 6DoF until SteamVR settles

Suspend spatial SDK startup while SteamVR launches, then restore it two seconds
after RUNNING is confirmed. Preserve saved tracking preferences and automatically
recenter same-device restoration, including cancellation and early stop.

Discard superseded launch requests and status replies after session teardown.

Validation: 128 focused JVM tests passed on the isolated commit snapshot; 129
passed with the current local hand-tracking work. Debug build and runtime checks
passed, and the reviewed APK was installed and hash-verified on the phone.

* Clarify glasses and phone camera tracking options

Separate Luma Ultra camera controls from phone-camera tracking so the two
hand-tracking switches have clear sources. Label bare-hand controllers and
Joy-Con position tracking explicitly, explain physical Joy-Con inputs and
camera priority, and update the camera prompt and calibration guidance.

Use fresh phone section and toggle labels so existing translations do not
hide the distinction. Preserve tracking behavior and saved preferences.

Validation: 39 existing UI tests, debug build, and packaged runtime verification
passed. Reviewed changes and installed the APK on the connected phone.

* Fix tracking handoff and shared runtime regressions

Release spatial ownership and controller overrides when output returns to the phone. Preserve USB-loss recovery, keep Vulkan submissions asynchronous, clean persistent guest scratch on runtime removal, and clarify the 6DoF head-tracking control.

* Apply smart-glasses virtual screens across DroidDeck menus

* Finalize Luma hand baseline and document smart-glasses support

Keep raw grayscale-to-RGB Full hand inference, wrist-only Joy-Con reconstruction, bounded visual holds, and the dead-zone rollback. Retain opt-in steady aim, recenter controls, reproducible Lite models, and the JPEG-padding fix.

Remove unsuccessful benchmark-only and USB transport experiments. Document the cross-brand 3DoF matrix, Luma Ultra 6DoF, SDK requirements, and app-wide screen behavior.

* Fix executable permission for SteamVR launcher

* Address hand tracking and VR review findings

* Bound stereo recovery test image comparison memory

* Localize smart-glasses setup and tracking diagnostics

Move calibration controls, status messages, validation errors, distance labels,
and printed-board instructions into Android string resources. Add and update
machine-assisted translations in all 32 supported non-English locale catalogs,
with corrections for recentering, hand tracking, product names, and measurements.

Keep print instructions within the page using text layout that supports wrapping
and right-to-left text. Correct the Lite model toggle description to reflect its
Lite palm detector and Lite landmark model.

Add locale coverage, format-argument, line-break, and measurement checks, plus
French and Arabic calibration UI tests. Preserve tracking calculations and the
shared runtime storage behavior.

Validation: Android resource and Kotlin compilation; 3 localization checks;
68 focused tests; 1,597 JVM tests at a 512 MB heap; French and Arabic UI renders.

* Correct smart-glasses translations from PR review

Fix the 42 localization findings covering hand and head terminology, disabled states, calibration dimensions, camera visibility, capture rejection, and menu references. Correct the repeated capture-error ambiguity in related locales and clarify its English source. Keep Romanian setup instructions consistent with the existing informal voice.

Extend localization measurement validation to distance hints and retry guidance. Verify the recovery screen's palette-dependent text color with one row-sized pixel buffer and guaranteed bitmap cleanup.

Validation: Android resource and Kotlin compilation; 3 localization checks across all supported locales; 68 focused JVM tests at a 512 MB heap.

* Work around SteamVR device loss with Adreno 840 Turnip v0.2.0

* Withdraw ineffective SteamVR flushall workaround

---------

Co-authored-by: maxjivi05 <maxjividen@gmail.com>
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
2026-10-18 08:37:09 -04:00
The412Banner ae94d9db54 feat: optional x86-64 Steam client (Valve's Linux client under FEX) beside the arm64 one (#152)
An opt-in second Steam client (Steam settings, Steam client: x86-64): Valve's
x86-64 Linux client, unchanged, runs under FEX in its own home with its own
game library and the same sign-in. Linux builds run directly, so titles such
as Team Fortress 2 and Half-Life use their Linux versions; Windows games use
DroidDeck-Proton as on arm64. The arm64 client stays the default.

- droiddeck-steam-x64: FEX and the x86-64 rootfs from DroidDeck-Components
  (sha256-pinned), client install and sync from Valve's CDN, sign-in shared
  with the arm64 client, its web helper on the GPU (ANGLE GL over FEX's GL
  thunk, zink, Turnip), Proton wrappers for the arm64 client's tools,
  DroidDeck direct for Linux builds, SD-card library (x86-64/ beside the
  arm64 one), repair.
- FEX 2610 built by build-fex.yml with thunks and three patches: an openat2
  fallback without openat2 (proot), newer-clang thunkgen, MAP_32BIT
  exhaustion returning ENOMEM. libblsession resolves RESOLVE_IN_ROOT paths
  inside the root.
- Session: x86-64 gating, shortcuts and compatibility tools per client,
  logs from the client that ran.
- App: client setting with the FEX version, an x86-64 chip on the Games
  header, the active client's library, art, storage, downloads, repair,
  Offline Mode, Decky, desktop mode, optional VAC diagnostics; per-client
  state for art, the content log, repair and leftovers.
- Strings in every locale.
- Review fixes: the library cache is saved only by the newest scan; an
  abandoned session's Steam logs come from the client it recorded; distinct
  VAC console names; FEXInterpreter in CPU pinning; clearer VAC hint in
  pl, ru, uk, cs and bg.
2026-10-17 23:57:52 -04:00
MaxsTechReview 97f976ef6c feat: Epic Games Launcher for Linux (#928)
* feat: Epic Games Launcher for Linux

Install Epic's official Linux launcher (EGLv2) from Epic's CDN with Valve's
Steam Runtime 4 and run it under FEX, signed in with the linked Epic account.
Epic games launch through a hidden launcher instance so they get the
launcher's own arguments, with the exchange-code launch as the fallback, and
DroidDeck installs show up in the launcher as installed.

In the launcher, touch scrolls like a phone app and the gamepad drives the UI:
D-pad and left stick move the selection, A opens, B goes back, the right stick
and triggers scroll proportionally, X opens the options menu, Y the keyboard
and LB/RB switch tabs.

* feat: Epic Games Launcher for Linux

Install Epic's official Linux launcher (EGLv2) from Epic's CDN with Valve's
Steam Runtime 4 and run it under FEX, signed in with the linked Epic account.
Epic games launch through a hidden launcher instance so they get the
launcher's own arguments, with the exchange-code launch as the fallback, and
DroidDeck installs show up in the launcher as installed.

In the launcher, touch scrolls like a phone app and the gamepad drives the UI:
D-pad and left stick move the selection, A opens, B goes back, the right stick
and triggers scroll proportionally, X opens the options menu, Y the keyboard
and LB/RB switch tabs.

* Route Epic games through Steam, import launcher installs, offer the second library

- Every Epic launch goes Steam -> Epic Games Launcher -> game; Play inside the open launcher hands the game to Steam
- Games installed from inside the launcher get a Games-tab entry and launch through Steam; the launcher installs to the last Stores target
- Stores install picker offers the Steam second library, with side-by-side choices
- uruntime xattr-only failures no longer fail the launcher unpack (app-extract)

* Hand launcher Play and Steam links to Steam, wait for FEX on first run

Play on a game the launcher just installed is matched to its install
record and handed to Steam. Steam games listed in the launcher open
steam://rungameid links, which now start the game in a Steam session.
Opening the launcher before Steam has downloaded FEX asks Steam for it
and starts Steam instead of failing with no-fex.

* Address review: FEX check, play-in-Steam action, touch route thread, scroll scale

fexReady needs a FEX binary in Steam's FEX tool, not just its folder.
The play-in-Steam action stays until the link is handled, so Run Steam
at startup can't start a session first. The pad touch route reads the
mouse mode without side effects off the main thread and posts the pad
update there. Vertical scroll uses the output height. A status-2 unpack
counts only when AppRun is there. The xdg-open command is tested
end to end for Steam links.

* Open the launcher through Steam, recover dropped shortcuts, sign out of both

The Epic Games Launcher now runs as its own Steam shortcut, so opening
it starts Steam, which opens the launcher, and Play inside it goes to
the running Steam.

Steam dropped a running shortcut from its library when the game exited
after a sleep/wake replay or a server re-logon, and launching it then
waited forever at ShowInterstitials. login1 only replays sleep/wake
when Steam is asleep. The session restarts Steam when a requested
shortcut is missing, and when a game exits with its shortcut gone and
nothing else runs.

Resuming after a long pause no longer reports failure while traced
processes are still waking, so "Steam is paused" goes away on the first
tap.

Signing out of the launcher signs DroidDeck's Epic store out, and
signing out in DroidDeck restarts the launcher signed out and clears
the Epic web cookies.

* Address review: one session-switch poll, Epic setup can't block a session

A new switch confirmation replaces the pending poll instead of adding a
second one that could start the session again. Epic library sync and
install-folder setup at session start are each guarded, so a bad
preference no longer stops the guest from launching.

* Uninstall the Epic Games Launcher from the Games tab

An Uninstall button next to Launch asks first, closes a running
session, and removes the launcher and its runtime. The launcher's
sign-in and install records stay, so its games keep their Games-tab
entries and a reinstall comes back signed in. Its Steam shortcut goes
away on the next Steam start.

* Address review: uninstall only after the session has ended

The launcher's files are removed only once the session is not running
and its phase has ended; a shutdown still in progress after the wait
reports failure instead. The confirmation reads the session state from
the front-end state.

* Find FEX that Steam installed on the second library

Steam's tools on a second library live in DroidDeck's private copy,
which the session binds over the library. The launcher's FEX check
only looked on the shared storage, so with FEX there it always asked
Steam for FEX and only Steam opened. It now checks the private copy
too.

* Start games without Steam, per-game Settings menu with Wine sync

"Start without Steam" now really leaves the Steam client out: the game
runs in its own Proton/FEX through droiddeck-proton-run in a run
session, and the Epic Games Launcher opens on its own with its games
playing in it. Run sessions for these games are not pinned to the big
cores and get DirectAudio and the added-games list like Steam.

The Games tab card is now "Settings", titled "<game> Settings": Start
without Steam, FEX preset, Wine sync (ntsync, fsync, esync, wineserver
or the app default) and Default, which puts everything changed for the
game back to the app's settings. The app-wide Wine sync choice is shown
in the Steam settings Session tab.

* Address review: uninstall guard, routed games, shortcut matching

Opening or reinstalling the Epic Games Launcher waits while it is being
uninstalled. Added games that are Steam installs keep their Start
without Steam setting under their Steam app id and start as that Steam
game. Live shortcut lookups wait for Steam's library to load and match
a same-name shortcut by its executable, so no duplicate is added. The
session treats the open launcher as itself even when it could not tell
its Steam app id.

* Address review: drop a queued launcher switch when it is uninstalled

A confirmed switch to the Epic Games Launcher that is still waiting for
the old session to end is cancelled when the launcher is uninstalled,
and never starts while the uninstall runs. The launcher id test sets
its environment for its own runs only.
2026-10-17 14:40:39 -04:00
+13 83eda433c8 Add VITURE XR controls, head tracking, and SteamVR (#732)
* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

---------

Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
2026-10-17 13:17:05 -04:00
Kurt Himebauch c796c7cd48 Feat/gpu drivers redesign (#858) 2026-10-16 17:50:45 +00:00
Kurt Himebauch f7ffab1345 feat: merge SteamVR and Cardboard into one VR drawer tab (#959) 2026-10-16 14:59:34 +00:00
Kurt Himebauch 2847910f22 feat: add immersive Quest SteamVR to the standard app (#910) 2026-10-16 01:48:00 -04:00
Resul Övür 5aa245cf39 feat: the second-screen Deck controls get the Gamepad tab (#895) 2026-10-15 16:54:43 -04:00
Kurt Himebauch 892f400145 feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782) 2026-10-15 09:36:28 -04:00
Kurt Himebauch 6e49c0c287 feat: low-latency controller and touch toggles in the session drawer (#808) 2026-10-15 07:53:25 -04:00
asdf17128 1bd3c64d01 Add top, bottom, and centered picture positions for Steam sessions (#871) 2026-10-15 07:01:01 -04:00
Gustash 3e3c4d69e4 feat: hide unfolded controls when a controller is connected (#829)
* feat: hide unfolded controls when a controller is connected

* fix: also hide controls when a BLE controller is connected

* fix: use refreshControls on session resume as well
2026-10-14 13:52:13 -04:00
Gustash 82f04fb22e fix: the touchpad moves a game's own cursor when it locks the pointer (#772) 2026-10-14 11:30:54 -04:00
d310e59fce fix: desktop session: Shift no longer stays held after typing capitals on a physical keyboard (#766)
* fix: desktop session: Shift no longer stays held after typing capitals on a physical keyboard

Android repeats a held key as more key presses. Those were forwarded to the
session as more wl_keyboard presses, and KWin's xkb counts every press of a
modifier, so Shift held for a few capitals took several presses and one
release and stayed held: digits typed !@#, letters stayed capital. The same
applied to Ctrl and Alt.

- the compositor no longer sends a press for a key that is already down;
  releases always go through (clients repeat keys themselves from the
  repeat_info it already sends)
- the app stops forwarding Android's repeat events for keyboard keys

Reported by whatsupbros with a Keychron Q7 over USB - thank you.

* Remove stale comments from statx patch

---------

Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-13 22:03:28 -04:00
Kurt Himebauch 83ec5708ed cleanup (#764) 2026-10-13 21:27:42 -04:00
Jagger15 a12ac8134a Add experimental Quest 2 and Adreno 6xx display-driver support (#676) 2026-10-13 14:16:20 -04:00
Kurt Himebauch 3820445561 feat: Cardboard VR mode with ARM64 SteamVR (#704)
* feat: add Cardboard mode with side-by-side lens-distorted eyes and 3DoF head tracking

* fix: derive the Cardboard field of view from the panel and recentre fully when far from upright

* feat: share the Cardboard head pose with the guest and add a SteamVR driver for it

* feat: run SteamVR's compositor on Turnip/KGSL with a display-extension layer and a driver-direct HMD

* feat: show SteamVR frames in Cardboard mode through a driver-side presenter and a fake direct-mode display

* feat: install and start SteamVR for Cardboard mode from the session drawer

* docs: describe Cardboard mode and the SteamVR path

* feat: drive SteamVR hands from the game pad and keep the Cardboard headset out of standby

* docs: record where the SteamVR dashboard stops

* fix: map Cardboard head tracking to the screen's axes and keep turns about the real vertical as yaw

* fix: give Cardboard its previous picture back when SteamVR stops

* fix: report sem_otime from emulated SysV semaphores so SteamVR's web helper can start

* fix: bridge SteamVR's shared semaphores across processes and keep Steam alive while SteamVR runs

* feat: present SteamVR straight to DroidDeck's compositor at panel resolution

* docs: update Cardboard VR notes for the dashboard, semaphore bridge and direct presenter

* fix: keep Wine and FEX signal handlers in the VR layer; add semaphore tracing

* fix: clear a stale SteamVR active marker on status

* fix: clear only an old SteamVR active marker

* fix: unblock SteamVR clients on Turnip and keep Steam's web helper alive across SteamVR runs

* fix: judge shared waits before a submit's own signals and on Vulkan 1.0 devices

* docs: record VR games, SteamVR Home and OpenXR results on the Thor

* docs: add Cardboard VR learnings from the Thor bring-up

* docs: add Cardboard VR screenshots from the Thor

* fix: keep the VR layer's display stand-in to SteamVR runs and clear a leftover marker at session start

* fix: report SteamVR start and stop failures from the helper's exit code
2026-10-13 14:36:56 +00:00
Kurt Himebauch da8fe068d9 fix: cap the session refresh rate at the device's peak refresh rate (#715) 2026-10-13 13:16:29 +00:00
Kurt Himebauch b74edb7e8d Download components from the session drawer (#679) 2026-10-12 22:18:47 -04:00
Kurt Himebauch 5e38e79c96 Add opt-in GOG achievements through Comet (#651) 2026-10-12 16:40:06 -04:00
Phobos665andxXJsonDeruloXx a7662ae13a feat(): Achievements UI for GOG & Epic game details page (#641)
* feat(): gog & epic achievements UI

* feat(): AI-generated translations - Please get review for these

* build_local: run on macOS hosts with Docker Desktop

Two steps of tools/build_local.sh failed on a Mac:

- The uruntime staging runs on the host, where macOS's BSD install has
  no -D, so `install -Dm644` stopped with "No such file or directory".
  The folders are now made first and the files copied with install -m644.
- Inside the cross-compile container, Docker Desktop's VirtioFS share
  now and then refuses the chmod that install -m makes (EPERM, on a
  different file each run, e.g. "setting permissions for
  .../droiddeck-esync: Operation not permitted"). The overlay and
  desktop scripts are copied with a plain write instead. Nothing is
  lost: the APK keeps no file modes, and the app sets them when it
  stages the runtime.

* feat(): adjust the store

* feat(): store-achievements adjustment for UI

* feat(): translation fixes and separate hidden achievements

* Show all achievements directly on store game details

---------

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-12 19:49:55 +00:00
The412Banner ca3743520e Merge remote-tracking branch 'org/main' into feat/start-without-steam 2026-10-12 15:16:35 -04:00
Gustash 8d0225932c fix: an unfolded Follow screen session turns to portrait again (#626) 2026-10-12 15:07:35 -04:00
The412Banner 40bca96db5 feat: Start without Steam, a per-game switch for games that close right away
A game that closes as soon as it starts can be tripped by Proton's Steam
setup (steam.exe, the Steam registry entries, the Steam client bridge).
The Games page of the session drawer gets a per-game Start without Steam
switch, stored as DROIDDECK_NO_STEAM=1 in the game's environment and listed
in its profile summary.

droiddeck-game-env acts on it for a game launch only: a Proton with umu's
launch (GE-Proton, Proton-CachyOS, DroidDeck-Proton) gets UMU_ID, so it
runs umu.exe in place of steam.exe and still sets up the prefix; a Steam
game keeps its protonfixes under its own id, an added game gets 0. Any
other Proton runs the game straight in the prefix (runinprefix).
2026-10-12 13:55:56 -04:00
Neolyum b25c4ea26b Fix multiple controller discovery (#614) 2026-10-12 11:45:00 +00:00
Juan MartíandKurt Himebauch 435beb7f19 feat: add persistent per-game compatibility profiles (#449)
* feat(profiles): add persistent per-game compatibility profiles

* fix(profiles): show Windows component overrides

Include per-game Windows component selections in the resolved profile summary so the session overlay marks those games as custom and shows the selected components.

* fix(session): detect Proton games across runtime paths

* fix(profiles): select the active Gamescope game

* fix(profiles): improve per-game reset feedback

* fix(profiles): align session components with game overrides

* fix(session): prefer selected Steam game during refresh

* fix(session): resume profile following when reopening games

* chore: keep local dev testing outside the repository

* test(session): remove local dev package path

* fix(session): preserve profiles when refresh fails

* fix(session): reject empty game profile reset scope

* perf(session): cache drawer inventory by refresh revision

* fix(profiles): align game presets and profile reset behavior

* fix(profiles): preserve originals and normalize shortcut ids

* fix(profiles): keep editor scope stable after rebase

* fix(tests): host Compose tests in both build variants

* fix(profiles): recover interrupted component selection saves

---------

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-10-11 17:00:28 -04:00
Kurt Himebauch ec24b3a472 feat: the built-in pad can be a DualShock 4 or DualSense, its touchpad fed by the trackpads (#559) 2026-10-11 04:21:31 +00:00
Kurt Himebauch 6455b1dade feat: the built-in pad's controller type switches from the session menu while Steam runs (#558) 2026-10-11 00:12:53 -04:00
Kurt Himebauch 542ad3e060 feat: the built-in pad can be a Steam Controller to Steam (#545) 2026-10-11 03:24:22 +00:00
SG3xHERO 96d7c66535 Add Steam Controller support over Bluetooth LE (#404) 2026-10-10 20:53:07 +00:00
David Kubeša fe60b3c279 Add global manual landscape orientation setting (#441) 2026-10-10 16:07:12 -04:00
Ashish Ajin c875ceda4d Hide the touchpad cursor when switching to direct touch (#424) 2026-10-10 15:02:38 -04:00
0579e688ba fix: preserve keyboard input on composite devices (#435)
* fix: preserve keyboard input on composite devices

* Fix composite input merge noteDevice call

---------

Co-authored-by: Jammo <8018115+kaosjammo@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-10 14:40:53 -04:00
0x142857andxXJsonDeruloXx c23c436502 Controller: optional Select button that opens the Steam menu (#384)
* Controller: optional Select button that opens the Steam menu

* Controller: translate the Select-opens-Steam-menu option

* Controller: clearer wording for the Select-opens-Steam-menu option

* docs: evidence for the Select-opens-Steam-menu option

---------

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-10 14:38:07 -04:00
SG3xHERO ca6cfcd193 Unfolded deck controls (#407) 2026-10-10 17:24:23 +00:00
Kurt Himebauch 416eb41d8d feat(desktop): add desktop uninstall and legacy LXQt cleanup (#493) 2026-10-10 10:59:32 -04:00
Kurt Himebauchandmaxjivi05 ddc4c18faf Steam's touch controller as on-screen controls (beta) (#431)
* feat: Steam's touch controller as on-screen controls (beta)

* fix: Steam touch controls appear once the session makes the device; tidier default layout

* fix: Steam touch layout decoding, saved layouts and new sessions

* docs: Steam's touch controls

* feat: Steam's touch icons, labels and colours on the touch controls; pick and save them like Steam

* feat: Steam touch icon picker as in-session panels; layout colour; docs

* Give each physical controller its own player slot

Every controller fed the one exported pad, so two pads played as one.
The first controller keeps slot 0 (the Deck in a Steam session); further
ones get slots 1-3 as separate Xbox 360 pads, created on first input and
removed on disconnect. In Deck mode only the Steam client sees those
pads and hands them to games through Steam Input. Rumble follows the
slot it names.

* feat: Steam Link's touch menu, per-game input modes, action set editing, add/copy/paste, oval controls, paste control

* feat: Steam touch controls drawn as Steam Link draws them; Steam Link's touch menu and layout tray

* feat: Steam touch controls in DroidDeck's style, D-mark guide button, shake to hide

* refactor: Steam touch controls become an On-screen controls choice instead of a second dropdown

---------

Co-authored-by: maxjivi05 <maxjividen@gmail.com>
2026-10-09 21:12:46 -04:00
Kurt Himebauch e0a7ce4f88 fix(desktop): address KDE feedback and keep local builds in sync with CI (#488) 2026-10-09 21:35:37 +00:00
Kurt Himebauch eaf26c8a20 feat: replace the LXQt desktop with SteamOS-style KDE Plasma (#473)
* feat: replace the LXQt desktop with SteamOS-style KDE Plasma

* feat: leaving the KDE desktop logs out through Plasma and returns to gaming mode

* feat: DroidDeck logo wallpaper as the KDE desktop default

* feat: build the KDE wallpaper from the DroidDeck mark artwork

* ci: keep the built desktop package as a short-lived artifact for device testing

* fix: the desktop loading screen no longer promises Steam on the desktop

* docs: the output resize comments name the desktop's KWin

* fix: the desktop package verifies every package's Arch Linux ARM signature and never replaces a published tag

* fix: programs sent to the GPU from the desktop drop its software rendering overrides

* fix: an interrupted desktop install no longer counts as installed

* feat: pin the desktop package to its DroidDeck-Components release instead of the catalog
2026-10-09 10:39:50 -04:00
SG3xHERO 32054e156e Add a Follow screen resolution for foldables (#403) 2026-10-09 07:13:06 -04:00
MaxsTechReview b6c1d3c09c Land taps and the pointer on what is drawn under them (#389)
The compositor takes touch and pointer positions over its whole output and
removes the letterbox bars itself, but the session sent them already
measured from the picture's edge, so the bars were taken off twice. Any
session whose output is a different shape from the panel (16:9 on a 16:10
tablet or a foldable, a fixed resolution on a wide phone) had taps and the
touchpad pointer pulled away from the centre, by up to a bar's height at
the edges: on a 2400x1504 panel showing 1280x720, a tap near the top
reached the first row and one near the bottom landed 32 rows low. Stretch
to panel hid it because that output has no bars.

Direct touch, the touchpad and mouse pointer, and the second-screen pointer
now send positions over the whole view, so the compositor's own mapping
puts them on the pixel under the finger.
2026-10-08 11:52:45 -04:00
Kurt Himebauch d231564f8e feat: agent bridge wayland and gamescope coverage (#406)
* feat: run a guest agent in every session for commands, focus and the Steam client's DevTools

* feat: give the agent bridge game, input, UI and experiment commands behind a Setup toggle

* feat: droiddeckctl commands for the new bridge, a scenario runner and contract tests

* feat: run cleanup steps after every scenario run so a failure cannot leak into the next

* feat: restart a session that died between scenario runs with start --reuse

* fix: give droiddeckctl stop its own, longer wait for the session's logs

* fix: harden debugging tools access and output
2026-10-08 03:50:58 +00:00
Juan MartíandxXJsonDeruloXx 206c8a8846 Add Steam background download mode (#335)
* Add Steam background download mode

* Keep active Steam downloads running

* Make background downloads a toggle

* fix: keep background downloads alive between Steam's rate log lines

* Track all Steam content update types

---------

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
2026-10-07 10:36:49 +00:00
MaxsTechReview 1bc23ac169 Language setting and translations: Spanish, Japanese, Korean, Chinese; Steam follows it (#187) (#284)
* l10n: move hard-coded UI text into string resources (#212)

About 650 user-facing strings were written in Kotlin and Java, so no
translation could reach them and the UI stayed half English in every
language. They now live in values/strings.xml.

- Dialogs, menus, status lines, toasts and errors shown to the user go
  through getString/stringResource.
- Code that matched on English text now uses IDs: installer and loading
  stages, Decky stages, storage labels and the Back button's order labels.
- Choice lists (upscalers, FPS limits, textures, themes, presets) carry
  @StringRes labels instead of English.
- Robolectric tests read the app's resources (includeAndroidResources).
- Six strings nothing used any more are dropped.

Existing translations are untouched; the new strings show in English
until they are translated.

* Layouts: fit longer text in other languages, and small phones

Found by screenshotting every page, tab and menu in each language on a
phone, a tablet, a 640dp phone and a foldable.

- Rail labels shrink to fit instead of being cut off (FitText).
- Tab rows tighten when they overflow and scroll the chosen tab into view.
- Menus fade over a down arrow when more entries are below, and open
  scrolled to the current choice.
- On a small phone the desktop card's button moves under its title,
  emulator tiles go two across, the GPU support verdict wraps and the
  Updates page stacks the channels under the status.

* l10n: translate every string into Spanish, Japanese, Korean and Chinese (#187)

Simplified Chinese, Traditional Chinese (Taiwan) and Traditional Chinese
(Hong Kong, reviewed for Hong Kong wording) are complete, as are Spanish,
Japanese and Korean: no missing keys and no placeholder mismatches.

* Language setting: follow the system, or a language picked in Setup; Steam uses it too (#187)

- Setup -> Launcher starts with a Language row: "System default (...)"
  and each language by its own name. With nothing picked the app follows
  the system language; a pick applies at once and stays until System
  default is picked again.
- Steam keeps its language in ~/.steam/registry.vdf under both
  Valve/Steam/language and Valve/Steamsteamglobal/language. Before each
  start of the client the guest helper droiddeck-steam-language writes
  both (and exportedsettings.json), and the client gets -language.
  SteamLanguage maps the app's language to Steam's names: english,
  spanish/latam, japanese, koreana, schinese, tchinese.

* l10n: translate the strings main added since, and Chinese review fixes

- Translate the 32 strings added on main since (Windows components,
  device details, Force SSBS, native Steam sleep) into all six languages.
- zh-CN: busy labels say what is in progress again (正在取消, 正在导出
  ...), as the other languages do.
- zh-CN: "set up" is 配置, as Setup is; 设置 stays for Settings.
- zh-TW: proton_compatible_note says 前綴 rather than "prefix".
2026-10-06 22:00:21 -04:00
MaxsTechReview 50f50b16e0 l10n: move hard-coded UI text into string resources (#212) (#282)
About 650 user-facing strings were written in Kotlin and Java, so no
translation could reach them and the UI stayed half English in every
language. They now live in values/strings.xml.

- Dialogs, menus, status lines, toasts and errors shown to the user go
  through getString/stringResource.
- Code that matched on English text now uses IDs: installer and loading
  stages, Decky stages, storage labels and the Back button's order labels.
- Choice lists (upscalers, FPS limits, textures, themes, presets) carry
  @StringRes labels instead of English.
- Robolectric tests read the app's resources (includeAndroidResources).
- Six strings nothing used any more are dropped.

Existing translations are untouched; the new strings show in English
until they are translated.
2026-10-06 21:59:31 -04:00
Kurt Himebauch 906009a33a fix: share session logs in about a second instead of re-scrubbing them (#352) 2026-10-06 14:51:43 -04:00
Kurt Himebauch 1d93626453 feat: remove Force game windows fullscreen now that games run on their own Xwayland (#349) 2026-10-06 18:04:22 +00:00
xXJsonDeruloXx 369e218afb Return frontend-launched sessions to Android Home 2026-10-05 21:34:36 -04:00