Files
DroidDeck/docs/development/astra-viture-stereo.md
T
maxjivi05 bdf876d47c Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes
- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated
2026-10-14 11:30:22 -04:00

8.5 KiB
Raw Blame History

Astra 2 and VITURE stereo

Tested connection

2026-10-14: REDMAGIC Astra 2, model NP06J, Android 16, RedMagicOS11.5.16_NP06J_GB, Snapdragon SM8850P; VITURE Pro XR (35ca:101d), firmware 07.0.03.013_20250422. The tablet reports a locked bootloader and green verified boot. Tests used the ordinary ADB shell, without root.

2D negotiates 1920×1080 at 120 Hz. The glasses accept stereo command 0x0008 [32] with reply 00 32, but Android then exposes only 640×480 at 60 Hz. An accepted USB command is not proof of a working stereo signal. In this state the glasses reject a 2D command (01 31 or 01 34) and their mode query returns 01 00. A physical cable reconnect restored 1920×1080/120 with this update; Android then requested USB permission again and control resumed.

On the fresh attempt, 0x030D [03] arrived 3.1 seconds after the accepted stereo command. The vendor SDK maps that report to 2D/120 (0x34); the subsequent mode query was rejected. The report does not encode a fallback reason or establish a fixed timeout. The earlier command acknowledgement cannot prove stereo retention.

What was checked

Route Result on this firmware
Pro full SBS command 0x32 Accepted by MCU; physical output falls to 640×480
Android preferred mode 3840×1080/60 Preference saved; physical supported modes remain 640×480 only; preference cleared after test
USB source/host → source/device Request issued; actual port stayed source/host
USB data disable/enable Data status changed and was restored; physical display remained 640×480
IUsbManager.resetUsbPort through ADB HAL callback reported success (0); physical display mode did not change
External-display power off/reset Did not recover the signal; glasses still rejected 2D
Physical cable reconnect Restored 1920×1080/120 and USB controls after the permission prompt
OEM mirror/3D controls, source review Change virtual-display routing, not physical stereo timings
OEM resolution selection, source review Chooses cached resolution candidates and prefers stale 16:9 mode
Pro startup mode / half SBS, SDK review No supported Pro startup-mode setting or half-SBS input

Public driver decompilations from the related REDMAGIC 11 Pro (NX809J, SM8850) retain an active mode override across a glasses hotplug. Their USB-PD disconnect path clears that override; their simulated hotplug path does not. This is consistent with the Astra's measured behavior, but does not prove its exact kernel implementation. That driver also validates saved user modes against EDID, so active overrides and saved preferences must not be treated as the same mechanism. The independent MagicDesk investigation documents a related failure on its separately identified REDMAGIC firmware.

The VITURE SDK matrix specifies full SBS at 3840×1080/60 for Pro. Persistent startup mode is restricted to Luma/Luma Pro. Among the Luma families supported here, 90 Hz stereo is an Ultra capability. The connected Pro firmware matches both the N6PL entry in the public updater catalog and the newest N6P entry in the public release-note service checked on 2026-10-14. This does not rule out unpublished, device-specific updates.

Powered dock results

A VITURE Pro Mobile Dock (35ca:3011) was connected between the Astra and Pro XR. Its official read-only P9 version query returned 2.01.03.0.03 with a valid checksum. The Astra negotiated 1920×1080/120, but enumerated only the dock's USB interfaces, not the glasses' 35ca:101d control/IMU interfaces. A one-second DroidDeck IMU sample returned zero packets.

DroidDeck treats the glasses as a display behind the dock: no USB permission prompt, video at 1080p/120 on the glasses, no Play SteamVR, refresh, 3D or tracking settings. The dock alone, without glasses, does not count as glasses.

VITURE's updater calls this dock P9 (app 35ca:3011, bootloader 35ca:3010). Its HID messages cover dock versions, battery, inputs and LEDs; none sets a display mode or forwards glasses commands or IMU data. 2.01.03.0.03 is public release 1.03.0.03_20250709; the latest, 1.03.0.06_20260409, adds Beast support and updater fixes only. The updater also reads a Lontium LT8668 in the dock, a DisplayPort receiver with its own EDID handling, so the tablet most likely sees the dock as its DisplayPort sink rather than the glasses.

VITURE's Pro Dock specifications confirm 3840×1080/60 video support and exclude phone features requiring communication with the glasses. The vendor SDK also treats the dock as a separate accessory, not an IMU device. This dock may test the video path, but it does not provide DroidDeck's current head-tracking path. Stereo negotiation and mode retention during an upstream-only reconnect still require a physical test.

No-root hardware design to test

A powered pass-through connection may let the tablet see the stereo EDID on a fresh USB-PD connection while the glasses retain their stereo mode:

  1. Power the adapter and glasses independently of the tablet connection.
  2. Enable stereo on the glasses.
  3. Disconnect only the tablet's upstream USB-C connection promptly after the stereo acknowledgement, keeping the glasses powered. Compare with a delayed disconnect to test whether the observed mode report affects retention.
  4. Reconnect the tablet and check its physical supported modes before starting a game.

This requires an adapter that preserves glasses power and mode during the upstream disconnect, passes 3840×1080/60 video, and forwards USB HID for controls and head tracking. VITURE's Adapter Ultra documentation explicitly excludes wired glasses data on Android, so it does not satisfy DroidDeck's current USB control/tracking path. Its power and video specifications also do not promise mode retention across upstream disconnect. This design remains unverified, not a purchasing recommendation. First verifying stereo retention through the adapter on a compatible host would provide a useful control. An intermediary presenting the stereo EDID before first host connection is another possible design; it must pass the actual stereo timing and preserve HID access, not merely advertise a wider desktop.

VITURE advertises full Android functionality for its separate USB-C to Glasses and Charging Adapter. That makes it a candidate for the USB-data experiment, not a confirmed fix. First check USB enumeration, brightness controls and live IMU data through the adapter; then test power/mode retention and the stereo timing.

Success requires Android to expose and select 3840×1080/60, different left/right eye images to reach the lenses, live head tracking, and repeatable return to 2D. A wide screenshot or wm size override alone does not meet those conditions.

App safeguards

DroidDeck waits up to 20 seconds for physical stereo confirmation. When the attempt ends at a low-resolution fallback, DroidDeck remembers it for that glasses model on this device, so Play SteamVR stops requesting 3D after a restart; Retry in the glasses settings clears it. A display that stays missing, such as an unanswered cast prompt, fails only that attempt. Automatic retries do not loop. USB mode reports are tracked separately from the physical display. When a session enabled 3D, stopping it requests a return to 2D, including during negotiation; this firmware can still require a cable reconnect. Output timing follows the active glasses display rather than the tablet's requested refresh rate.

Keep hardware experiments separate from game loads. End the session, force-stop DroidDeck, and reopen its home screen after each game test. Read current HAL temperatures rather than cached thermal-service samples.