Commit Graph
821 Commits
Author SHA1 Message Date
Valiantsin DzerakhandClaude Opus 5.5 234a10f413 With sync_ahead an exit line gives the run total of the waits at a pool invalidate, as the shadow log lines stop at frame 1800 without TOTK_TRACE=perf
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:55:13 +03:00
Valiantsin DzerakhandClaude Opus 5.5 bc579c62e8 The qstamp patch set is switched off when sync_ahead is refused, so TOTK_SYNC_AHEAD=1 without shadow storage leaves the game's depth query check as it was
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:55:12 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ee6d5a6183 Merge dev into task/pr1275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:54:52 +03:00
Valiantsin Dzerakh 792d5398ab Merge branch 'pr1276-head' into task/pr1276
# Conflicts:
#	docs/agents/symptoms.md
#	runtime/cfg.c
2026-11-18 18:46:16 +03:00
Valiantsin DzerakhandClaude Opus 5.5 65e6dc50d3 Merge pull request #1284: on 1.4.3 DLAA's jitter goes into the game's camera instead of the viewport, so water seen at a low angle stops flickering (ipavlin98, #1126)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:34:05 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c145f2bd5d The camera jitter checks where each copy puts its matrix in the block: f_70000e31d4 takes the offsets from the shader's layout (x8), so only a projection at 0x70 and a view-projection at 0x30 take the offset, a projection whose view-projection lies elsewhere gets its centre terms back, and a block counts as given only once both matrices carry it (#1126)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:29:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 902d91a94e Merge pull request #1275 head into task/pr1275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:27:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0ae38dd34a Merge pull request #1278: a VRAM mirror copies from the shadow only after the shadow sync, so loads with sync_ahead and replay_workers no longer leave stretched slabs (ipavlin98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:26:25 +03:00
Valiantsin Dzerakh c1449b2a9b Merge commit 'refs/pull/1284/head' of https://github.com/valentderah/totk-pc-recomp into task/pr1284
# Conflicts:
#	docs/agents/symptoms.md
2026-11-18 18:22:56 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0350d91b72 The water volume mask bias is decided once per state change and only for LEQUAL and GEQUAL draws (#1126)
prepare_draw sets ex->volume_bias where the draw's dynamic state changes, so record_fixed reads a flag instead of
checking the pipeline state on every draw. A census of the matching draws in the field, the town and rain found two more
states with the same blend and depth signature, both tested GREATER: the volume's back faces into the same channel and
another shader's front faces into red. GREATER's equal case fails, and the bias toward passing turned the game's tie
the other way for them; they are now left as the game sets them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:18:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 593eeeb8ed The lock order comments name the new edge: mirror_sync and mirror_create take shadow_lock under mirror_lock
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:08:44 +03:00
Valiantsin DzerakhandClaude Opus 5.5 402d1fe8b0 Merge pull request #1278 head into task/pr1278
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 18:07:48 +03:00
Valiantsin Dzerakh a111ca77b3 Merge commit 'refs/pull/1283/head' of https://github.com/valentderah/totk-pc-recomp into task/pr1283 2026-11-18 18:06:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a6ad6af274 Gamepad input keeps working while the game window has no focus: SDL's background joystick events hint is set before SDL starts (#971)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 13:30:52 +03:00
ipavlin98 04146289ac The camera jitter's read-back takes a block's centre terms as an offset only when this code gave that block that offset: the inventory's camera has an off-centre projection of its own, which read as a jitter of 1152 pixels, so DLSS smeared the world behind the inventory into horizontal streaks 2026-11-18 10:42:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 18482e0af0 Gyro drift learning at rest gets its switch on the Controls tab, below the gyro calibration row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 09:17:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9f2a9d3e59 Gyro drift learning at rest is off by default: subtracting a learned bias made aiming feel worse in play before, so it stays a switch for players with a drifting controller
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 09:12:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 96a809044d Steam Input motion: buttons move to Steam's virtual gamepad once it is up, a controller Steam hid keeps its own bias as the pad, and a sensor SDL could not turn on is logged with SDL's error (#1282)
1. scan_pads took a controller Steam hid when the virtual pad was not up yet and kept it for the session, so Steam's
   remapping was lost. While the open pad is a hidden one, pad_physical looks again every RESCAN_MS and scan_pads
   moves the buttons to the virtual pad; the hidden controller stays open as motion_extra, so motion goes on with
   the same bias and orientation.
2. pad_identity marked " (under Steam)" only on motion_extra; a hidden controller that became the pad lost the mark
   and could take the bias calibrated with Steam closed. The mark now follows steam_hidden_id.
3. After pull request #1024: sensors_ready logs SDL_GetError when the pad has both sensors but enabling them failed,
   instead of "has no gyro and accelerometer".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 09:08:52 +03:00
2dbdcf9a37 Read the gyro from the controller behind Steam Input's virtual gamepad when the game is started from Steam, from the patch in issue #1282
A game Steam starts gets SDL_GAMECONTROLLER_IGNORE_DEVICES with the controllers Steam reads itself and sees Steam's
virtual gamepad, which has no motion sensors. input.c steam_reveal keeps that list and clears the hint before
SDL_Init (only with motion on); scan_pads still takes the virtual pad for buttons and sticks, so Steam's remapping
holds, and motion_source opens the hidden controller for its gyro and accelerometer only. A bias belongs to the pad
as Steam presents it: " (Steam Input)" or " (under Steam)" in gyro_bias_pad. docs/controls.md, "Steam Input and
motion", says the Steam layout must bind the gyro to something or Steam zeroes it on the Steam Controller.

The patch as posted against 6151ac4, with sensors_ready merged with #1274's restart. Tested by the author on Linux
(Steam Controller) and the Steam Deck; not on Windows.

Co-authored-by: St5sz2Jk <St5sz2Jk@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 09:08:13 +03:00
45a0cd1f6c Learn the gyro drift left after calibration while the controller lies still and subtract it, so the aim stops sliding on a table, from pull request #380 (#292, #1267)
The calibration removes the bias measured once; a bias that moves as the controller warms up, or a controller never
calibrated, still turns the aim slowly. motion_fusion.c drift_track learns it from 256 ms windows in which the gyro
stays within 0.04 rad/s and the acceleration within 0.03 G peak to peak, after half a second of rest, with a time
constant of 0.25 s until the estimate settles and 30 s after. The estimate sits on top of the calibrated bias and is
cleared with a new controller, a new or loaded calibration and a change of gyro_calibration. New setting
gyro_auto_bias (live, default 1).

Taken from #380: the rest window by peak to peak, the two time constants, the per-axis limit. Left out: the
0.006 rad/s dead zone, which ate slow aiming; the one global state shared by every fusion instance; the reset at
every StartSixAxisSensor; the 0.5 G acceleration gate, which let a controller in motion count as still. The first
estimate is limited to 0.1 rad/s from zero instead of 0.15; a larger bias is the calibration's job.

Also: a sample without a reading at a restart (#1274) no longer returns before the calibration's log and save.

--probe-services checks the drift with the switch off and on, after a calibration whose bias then moved, a slow
aim in the hand, and the levelling of #1274 with a bias on every axis.

Co-authored-by: airquark <97342227+airquark@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-18 09:06:30 +03:00
ipavlin98 d5d62ab406 The camera jitter is described as dlaa_cam_jitter, and the game's matrix copies skip it at once while DLSS is not running 2026-11-18 09:01:16 +03:00
ipavlin98 77cb787de7 The water volume mask's depth bias can be turned off with volume_mask_bias = 0 (or TOTK_VOLUME_MASK_BIAS), a test setting to compare against 2026-11-18 09:01:00 +03:00
ipavlin98 706144d673 Use the zero rate vector for the zero reading in the fusion start probe 2026-11-18 09:00:12 +03:00
ipavlin98 b155be1881 Level the six-axis orientation from the first real accelerometer reading and pull it toward gravity at 4/s while the controller is held still, so a bow aimed right after the game starts or after a load no longer turns sideways when the controller is tilted up or down 2026-11-18 09:00:12 +03:00
ipavlin98 0eab458030 Symptoms: water at a low angle flickering with DLAA from the viewport jitter the game's camera did not share; cfg knows DLAA_CAM_JITTER 2026-11-18 08:50:22 +03:00
ipavlin98 b5936a6aa9 The camera jitter moves on with the game's presents instead of at a camera block written again: the game fills two sets of blocks in turn, so each phase went to two frames, and each view-projection takes the offset its own block's projection took 2026-11-18 08:36:50 +03:00
ipavlin98 121b4fdf33 On 1.4.3 DLAA's jitter goes into the game's camera instead of the viewport: the projection's centre terms and the view-projection of each perspective camera with the scene's aspect take the offset where the game copies them into their uniform blocks, so the game's full-screen passes rebuild positions with the camera the scene was drawn with, and screen-space reflections on water seen at a low angle no longer flip between hit and miss with the jitter's phase 2026-11-18 08:13:26 +03:00
ipavlin98 cc84958cee Give TotK's water volume mask draws a depth bias toward the viewer, so a puddle's surface, on which the volume's top face lies, counts as inside the volume in every frame instead of by rounding and the camera's sub-millimetre motion, which turned the puddle's reflection on and off in patches from frame to frame, more with DLAA 2026-11-18 05:41:05 +03:00
ipavlin98 0f2cc1071a A mirror's copies from the shadow wait for the shadow sync: the prologue seals the mirror queues before it syncs the shadow and copies only those, and a mirror sync touches its shadow pool, so with replay_workers and shadow_defer a recording thread no longer queues a copy that reads the shadow before the CPU's write reached it, which left terrain in the Depths as stretched slabs over the ground for the rest of the session 2026-11-18 02:03:53 +03:00
ipavlin98 efb896235a DLSS without auto exposure is a setting, dlss_fixed_exposure, next to the other DLSS settings, off by default: 0 creates DLSS with AutoExposure as before, 1 without it, and a change recreates the features at once 2026-11-18 00:58:32 +03:00
ipavlin98 68078948f5 With sync_ahead an invalidate of pool storage waits for the GPU write of a value the game was told is done when the range holds no older result, so the pixels TotK reads back once through a buffer per request are no longer zeros or an answer from the ring's last round, which in the Depths put Link in gloom on clean ground; buffers the game reads every frame still get the result of the frame before without a wait 2026-11-18 00:21:46 +03:00
ipavlin98 fd08b5cee3 DLSS is created without auto exposure, so large distant blocks behind the fog in the Depths no longer turn darker or lighter for a frame while the camera moves 2026-11-18 00:21:25 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6b0974f08d Merge pull request #1188: opt-in quick save and quick load on rebindable keys with no menu on the screen, game 1.4.3 (itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:17:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 52d913c7e0 Quick save takes its request back with an atomic and, and the no-quick-save note names the key by its role, as it can be rebound (#1188)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:17:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 358b7916d8 Merge task/hud: hud_width keeps the HUD within the middle 21:9 or 16:9 of a wide screen, from pull request #1262 (Marjaperse, ProSep, #643)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:15:16 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7e2712e87e Quick save logs once that it is 1.4.3 only on other game versions, and a quick load under way goes on while the settings menu opens, so the held picture always ends (#1188)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:15:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 96afa531c9 Merge pull request #1131: with frame-ahead on, fence write-backs no longer wait for the GPU about every ninth frame (ProSep)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:13:01 +03:00
Valiantsin DzerakhandClaude Opus 5.5 64e965078c wb_eager moves to the diagnostics settings and out of totk.ini.example, as part of sync_ahead
It acts only with sync_ahead in effect and is on by default there, so a player who turns on sync_ahead gets it; 0 and check stay for comparing. docs/settings.md keeps the row.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:12:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8232ac4505 The exit log counts the fence write-backs that waited for the GPU and their time with frame-ahead on
The new line is written for wb_eager 0, 1 and check alike, so the stall wb_eager removes can be compared between the settings. It costs a clock read only on the blocking path.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:12:18 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f801169e1c Merge pull request #1188: opt-in quick save and quick load with no menu on the screen (itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:07:20 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1974b671be Merge pull request #1263: with DLAA, fog and particles can be drawn over the smoothed picture, so dust in shrine fog no longer vanishes; off by default until checked on NVIDIA (ipavlin98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:07:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a702c33f91 dlaa_effects_after is off by default until the inventory preview, the scope and water edges are checked on NVIDIA
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:06:49 +03:00
Valiantsin Dzerakh 006c186928 Merge pull request #1262 into task/hud: hud_width keeps the HUD narrower than a wide screen on the Shapes step (Marjaperse, ProSep) 2026-11-17 20:06:17 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c76a38852e The DLAA effects switch sits with the other DLSS settings and is read only while DLSS runs
dlaa_effects_after moves to the Screen tab under the DLSS rows, to [display] in totk.ini and totk.ini.example next
to dlss_char_mask, and vk_dlaa_frame reads it after the dl_active check, so a game without DLSS does no new work
per frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:05:44 +03:00
ProSepandClaude Sonnet 5.5 3b2bd1f6ba Stop fence write-backs from stalling the game behind the GPU with frame-ahead on
With sync_ahead on, the fence write-back of small GPU-drawn targets that the game reads back still blocked the game thread behind the running frame, about every ninth frame. wb_eager copies those targets into staging at the end of the submission that rendered them, so the write-back at the fence wait needs no GPU wait.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-17 20:05:15 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a36e7917da Merge task/cascade: shadow_range moves the sun cascades on 1.2.1 and 1.4.3, from pull requests #1258 and #1254 (shinodanpen, #606)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:03:05 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f53b86c61d Merge pull request #1253: sync_ahead works on game 1.1.0, and game-time scripts find the player there (Marjaperse)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:01:26 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1ccefb46f2 Merge pull request #1252: the dynamic resolution switch holds the full scene size on game 1.1.0 (Marjaperse)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 20:01:25 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e031ac596a Merge dev into task/pr1263
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 19:59:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4613d9b458 res_shadow_range's comment names both cascade tables and the controller's boundaries they scale (#606)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 19:58:02 +03:00