Commit Graph
16 Commits
Author SHA1 Message Date
Wellington Dias 2f78585b4c Add a Steam Deck profile and keep the picture's proportions on screens of another shape.
The present fits the game's picture into the largest centred rectangle of its own aspect ratio and clears the rest to
black (gfx_fit_rect, through both the blit and FSR), so a 16:9 game on the Deck's 16:10 screen is no longer stretched;
picture_fit = stretch keeps the old fill. probe-window checks the bars as well as the picture.

device_profile = auto|desktop|deck: on a Steam Deck (the firmware's Valve Jupiter or Galileo board, or SteamDeck=1) the
keys totk.ini does not set default to fullscreen, a 1280x800 window, a 1280x720 game resolution, the game's own scene
scale, vsync and a 40 fps limit; the environment and totk.ini still win. These are starting points until measured on
the device (docs/tester-guide.md, Steam Deck).

Both stick clicks (L3 + R3) step the performance overlay as F10 does, for a controller with no keyboard. The menu offers
1280x720 and 1600x900 game resolutions and 40, 45 and 90 fps limits.
2026-10-29 18:14:30 -03:00
Valiantsin DzerakhandClaude Opus 5.5 8691f6d724 Remap keys, mouse buttons and controller buttons from the Controls tab
Every Switch button and the eight stick directions the keys drive get two key cells and a controller cell under the
button layout. A cell takes the next key, mouse button or controller button pressed; a key in use moves over, a
controller button swaps. The tab writes bind_ lines (new: bind_LSTICK_* / bind_RSTICK_*, key:default, pad:default) and
input_win.c builds the tables again when one changes, so remapping applies while the game runs. More keys can be
bound: Enter, Backspace, right Shift and Ctrl, Alt, the numpad, punctuation, F2-F7, F9, F12, mouse buttons 4 and 5.
Alt alone no longer enters the window menu loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:53:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ba0f33e044 Pick the gamepad button layout by the pad's labels, with a Button layout row on the Controls tab
The gamepad map was by position only, so on an Xbox pad the button labelled A pressed Switch B. pad_layout = auto
(default) keeps the Nintendo layout for a pad whose east button SDL reports labelled A and uses the Xbox layout (south
A, east B, west X, north Y; cross A on a PlayStation pad) for the others; nintendo and xbox force one. It applies at
once; bind_ lines name physical buttons and apply on top of either layout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:20:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f654da3d8b List the performance and diagnostics keys in totk.ini.example with what each does and its default
The file pointed at the Advanced tab for them; it now has every key the tab shows, grouped as the tab groups them, and
a [diagnostics] section for trace and the flight recorder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:20:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8ea1b5721f Update the remaining explanatory files: issue form, contributing, maxwell sources, settings example, comment rule
The bug form asks for the version on the settings menu's title line instead of the window title, which has none,
points to Copy system info and to logs\totk.log. CONTRIBUTING lists the lifter's differential tests and the commit
message style for pull requests. docs/maxwell.md cites nxnative's notes by name, since nxnative rewrote them and the
line numbers pointed nowhere, and pins the MacNativeGames shorthand to the commit its line numbers were read at.
totk.ini.example gains menu_lang and input_record and points to the menu's Advanced tab for the other keys. AGENTS.md
asks comments to cite upstream code by project, file and function. README: Linux and the Steam Deck are the platforms
planned.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:12:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 eca89641fa Keep 1.2.1's scene at the wanted size, package zstd for the installer
1.2.1 renders the scene size it reads, while 1.4.3 scales it by output width / 1920: on 1.2.1 the scene set is on
whenever the output grows (2560x1440 gave a 1600x900 scene before, 2133x1199 now). An output at or below the shipped
size needs no grown HeapDef. The release deps carry the static libzstd and its header, totk.ini.example the four new
keys, THIRD_PARTY_NOTICES.md the MacNativeGames sites, FSR 1 and zstd.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 13:56:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b1cbbb93a6 Make the frame limit a setting: 30, 60, 120, 144 or the monitor's refresh rate
TOTK_FPS_LIMIT (fps_limit in totk.ini, live, menu row on the Game tab) replaces the 30/60 choice of TOTK_FPS60. The
pacer holds frames to the limit in nanoseconds instead of 60 Hz ticks; the real-time step has no lower bound, so game
speed stays 1.000 above 60. `display` follows the exact refresh rate of the window's monitor (QueryDisplayConfig),
measured again when the window moves or the display mode changes. A limit of 30 switches the patch set fps60 off as
before; unset, the older fps60 = 0 still means 30. Above 60 needs the real-time step and is marked experimental.

The vsync event stays at 60 Hz: on 1.4.3 the title runs at 144 fps with it, so the game does not wait for it each
frame. Field on machine A: 69-88 fps, CPU-bound (GPU 3.4 ms per frame).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:39:13 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c757a42798 Add the frame rate overlay: TOTK_PERF_OVERLAY fps shows the frame rate in the top right corner, full adds the mean and longest frame time of the last half second, F10 cycles the modes and saves the choice
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:50:45 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c6a7a28ab4 Compile Dear ImGui and draw the menu overlay into the swapchain image, behind the test hook TOTK_MENU_TEST until the pages are agreed
The window follows TOTK_WINDOW_SIZE, TOTK_FULLSCREEN and TOTK_VK_PRESENT while the game runs, and F11 saves the fullscreen state.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:35:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c3b3c297cf Merge main into task/menu: keep main's button remapping, Esc cursor release and new settings beside the live settings, with one live mouse sensitivity
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:27:26 +03:00
Valiantsin DzerakhandClaude Opus 5.5 31b864380f Keep the replay on the submitting thread unless TOTK_REPLAY_ASYNC=1, since no timing showed a gain yet, and list async_preempt and replay_async in totk.ini.example
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:23:27 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a220b89459 Collect the open work in one list in docs/backlog.md, read the shared shader list's "*" texture kind as 2D, and record measurements from the other test machines
The backlog gets one "Open work" section: freezes, bugs (the Yunobo fade with its repro), machine items and paused
branches. prepare_shaders.py no longer stops on the "*" and "*_depth" texture kinds of the newer list revisions.
The playbook records the GTX 1050 Ti, RTX 3090 Ti and 8th-gen i7 numbers and how to get a perf log from those
machines; port-lessons gains the MacNativeGames virtual-core preemption row; totk.ini.example lists mouse_sens.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:16:10 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e8697659ac Remap gamepad buttons and keys with bind_<button> lines in totk.ini, one data-driven table for the pad and one for keys
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 08:50:48 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b9a7896095 Make settings changeable while the game runs and save them back to totk.ini
cfg_set stores a value in memory and bumps cfg_version; consumers that keep a
parsed value compare the version and parse again when it changed. cfg_save
rewrites only the changed lines of totk.ini, keeps comments, and adds a missing
key under its section (after its commented example line when there is one).
The environment still wins over both.

Live consumers: volume (new TOTK_VOLUME host gain in the mixer), frame limit
(TOTK_FPS60 switches the fps60 patch set and the pacer caps at 30 or 60),
rumble strength, curve and triggers, gyro on or off, mouse sensitivity.
TOTK_MOTION=0 and rumble strength 0 now keep their hid handles and read at
rest or stay silent, so they can be turned back on. --probe-cfg covers
cfg_set and cfg_save.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 23:54:56 +03:00
Valiantsin DzerakhandClaude Opus 5.5 dda22f6e01 Add rumble strength, curve and trigger settings for Xbox pads
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 23:12:15 +03:00
Valiantsin DzerakhandClaude Opus 5.5 19c9b648d1 Add the recompiler, Windows runtime, tools and docs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 22:27:54 +03:00