The bias reset in sensors_ready only ran when sensor_pad was nonzero, but scan_pads zeroes it on every disconnect,
so a pad connected after another one kept the old pad's bias, and an attempt still collecting finished on the new
pad under the old pad's name. The bias was also loaded only once, at the first StartSixAxisSensor.
- input.c pad_bias_select runs for every pad the sensor code sees: it drops the old bias and attempt, then loads the
saved bias when gyro_bias_pad names this pad. scan_pads drops them on disconnect. The bias loads with
gyro_calibration off too, so turning the switch on mid-run applies it.
- The pad identity is the name plus an FNV-1a hash of SDL's serial when the pad reports one, so two pads of one
model no longer share a bias; the hash keeps the Bluetooth address out of totk.ini and the log.
- An attempt skips 0.5 s of samples (the button press shakes the pad), then averages 1 s. It is rejected when the
largest per-axis standard deviation exceeds 0.04 rad/s; a steady bias of any size passes. The row then says the
controller moved (new UI_MENU_GYRO_CALIBRATE_MOVED in all four catalogs) and the bias in effect stays.
- The timeout counts 5 s without a sample, not 5 s from the start.
- Calibrate gyro starts the sensor thread when the game has not yet (title screen) instead of doing nothing.
- Row states are an enum (MOTION_CALIB_*); motion_calibrate_start takes the clock, and only the gamepad's fusion
instance writes totk.ini, so --probe-services now checks a measured bias, a rejected attempt and the timeout.
- The duplicate copy_name in motion_fusion.c is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR's level-of-detail distance part is left out: it made no visible difference in play, and the emulator mod it came from was dropped there as a placebo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Playtests showed no visible difference from lod_range, and the emulator mod scene dropped the same change as a placebo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_AUDIO_DEVICE names the device as SDL lists it; unset, empty or default keeps the system default and the same open
as before. audio_mixer.c output_open opens the named device, or the default with one log line when it is not
connected. Once a device is chosen, an output worker thread (output_worker) owns the SDL stream: on a cfg change and
once a second it resolves the name again and output_switch opens the new device with the same spec, destroys the old
stream (which waits for its callback), restarts the prefill and resumes. The render thread only wakes or starts the
worker (output_watch), so the game's audio never waits for a device open. A chosen device that disappears falls back
to the system default and comes back within a second of being plugged in again. TOTK_AUDIO_CHANNELS=auto reads the
channels of the device chosen at start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PAD_TOUCHPAD follows the paddles in input_map.h and reads SDL_GAMEPAD_BUTTON_TOUCHPAD in input.c pad_physical, so
input_capture sees the click when a Controls cell waits for a press (#852 had no pad id to report it). It is unbound by
default; pads without a touchpad never report it held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pick patched before (main+0x1ee8424) is reached through its vtable only when the method is overridden; the culling
passes run about 20 inlined copies of it, so the switch changed almost nothing. The lodrange set patches the two places
per version that compute the level depth B at model setup (the setter and its inlined copy); the slope of the coarser
levels follows from B there, and max takes B = 1e30. The menu row sits under Grass range, with Steady detail under load
after it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The yaw axis has no gravity reference, so it drifts with the gyro's
manufacturing bias. Two controllers of the same model can drift in
opposite directions, and the sensor fusion had no way to estimate or
remove the offset: aiming with motion turned slowly on its own and
needed constant correction.
A Calibrate gyro row on the Controls tab collects 250 gyro samples
(about a second) while the controller is held still, averages them per
axis into a bias, subtracts that bias from every sample before the
fusion integrates it, and restarts the angle so the estimate starts
clean. Collection has no motion threshold: a controller whose bias
exceeds any absolute threshold would otherwise never finish, which is
how the first version of this stalled with no way out. Five seconds
without the expected samples ends the attempt, from the sample path and
from the menu alike, so a sensor thread that stops feeding it is
reported instead of leaving the row on "calibrating". The first raw
sample and the final bias are logged, so a report carries the numbers
that were measured.
The row's value says where the controller stands: calibrating,
"<controller>, calibrated" once it is done or when the bias was loaded
from totk.ini at start, and "calibration failed" when an attempt timed
out with no bias in effect. A controller change cancels a calibration
that is in progress and clears the bias and the label, so neither is
carried over to the new controller.
The behaviour sits behind gyro_calibration (the Controls tab's "Gyro
bias calibration", default on, live): off, the fusion takes the raw
gyro, an attempt in progress is dropped, and nothing is loaded at
start, while the saved keys stay in totk.ini so turning it back on
restores the last calibration.
The bias and the controller's name go to totk.ini when calibration
completes, outside the fusion's lock, and are loaded at the next start
only when the connected controller has the same name.
Tested with a Switch Pro Controller on the 1.4.3 build: the log shows a
z-axis bias of 0.139 rad/s (8 degrees per second), calibration finishes
in about a second, the yaw drift is gone, and the row reports each state.
The setup wrote 64 patch folders: every prompts style for all 15 shaped game resolutions. The new shapes step
(installer/screens.py) writes romfs-patches-<w>x<h> only for the shapes of the connected displays, the output_res the
game defaults to on each and the totk.ini output_res, and the prompts' shaped folder only for the style totk.ini
selects. One folder per shape: the runtime maps the game resolution to its shape's size (cfg.c cfg_shape_size, the
closest ratio within 1%), and an exact-size folder from an older install still wins. The settings menu marks a game
resolution whose shape has no folder and can start the generator for it in the background, for the next start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pull request #1136 with three fixes: the Russian and Portuguese rows name Ultrahand as the catalogs do, smooth map
zoom takes the wheel only on the map menu_cursor.c finds, and the weapon bar opens only where the camera hooks saw
free roam, a lock-on or a mount. Off by default (gameplay_tweaks_enabled = 0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add volume_music, volume_sfx, and volume_voice sliders under the Sound tab
in the F1 settings menu and in totk.ini to control background music, sound
effects, and character voices independently.
Classifies audio streams by file path in RomFS, parses BARS and BWAV headers
for ADPCM coefficient tables and stream formats, tags decompressed Opus streams
from nn::codec, and applies per-category gain factors in the audio mixer
during voice rendering.
Localized across English, Russian, Brazilian Portuguese, and Simplified Chinese.
Documented in totk.ini.example.
The Russian rows called it Автоколесо, the catalog and the game say Ультрарука; the Portuguese rows kept the English
name where the catalog says Ultramão.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1092's pointer image (runtime/cursor_art.c: a gold arrowhead with a dark edge, a turquoise gem and a soft shadow,
drawn at the window's DPI) was left out of dev because it changed the pointer for every player with no way to keep
the system arrow. It now comes with pointer_image (input section, live, default 0): 0 leaves the window class's arrow
as dev has it, 1 shows the image while the cursor is not captured. Win32 reads the setting at WM_SETCURSOR (the
next mouse move after a change); SDL sets the image or its default cursor when the settings change (input_sdl_idle).
The setting has its row under the mouse rows of the Controls tab, its text in the four menu languages, and
totk.ini.example and docs/controls.md describe it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
By default the left button is Y, which opens the dialogue log in a dialogue box. While MessageDialog_00 is open the
left button now presses B, which advances the text and shows the rest of a scrolling line, and the right one A.
Dialogue choices keep the menu pointer, where a left click picks the choice under it, so clicking through a
conversation does not pick the choice the focus starts on. The setting is live and independent of menu_cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mod file whose name carries Product.<n> and which the RomFS lacks was counted as made for another game version and
never served. The game does ask for such names: on 1.4.3 with mods on, the file trace (trace = fs) shows it opening
Sound/Resource/Pack_MasterSword.Product.110.bars.zs, while its RomFS holds only the Product.140 and the unversioned
file. A sound mod that ships its pack under all those names was silent here and works on a console, where LayeredFS
shows the game every file of a mod. Such files are now added overlays like any other new file. Another version's
resource size table is still not served and still lends its entries; the files are still counted, and the Mods tab
and docs/mods.md now say they are read only when asked for by name.
tests/mods_romfs_check.py gets a case for it. Not run here: the test and --probe-fs need a build and the game's files.
runtime/romfs.c compiles with llvm-mingw.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TgQM2zwuVagwScByEJhT8V
The game grows grass blades only inside its near grass map, a 62.5 m square around the camera drawn into 256x256 and
128x128 textures, so on open meadows the grass appears a short way in front of the player. grass_range (percent, 50
to 400, default 100) scales the map's extent, step and both textures together through a new grass patch set (1.2.1
and 1.4.3) that loads them from patch page +128..+144, and grows the HeapDef grass heap and the application pool for
the larger textures. At 100 the set stays off and nothing changes. A row in the Display menu, text in all four menu
languages, and totk.ini.example describe it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The latency markers and the present carried different present IDs: g_reflex_present_id went up only in flip_locked, so
frame k's simulation, input and submits had ID k and its present k+1 (and with frame_queue or replay_async frames could
share one). Each frame now gets its ID once, when the game acquires its window texture (SIMULATION_START,
vk_reflex_frame_begin), and carries it: INPUT_SAMPLE and SIMULATION_END take the game's current frame, a submission
the frame of the thread that submits it (the game thread's, or the one the replay thread got with its ReplayItem, or
the present thread's from its PresentJob), and the present the frame of its blit (PresentJob.pid -> g_flip_pid). A
present without a frame ID takes the next value, as present IDs must grow on a swapchain.
From the review: a new swapchain sets the sleep mode again (it starts with low latency off), Reflex is off without the
presentId feature, REFLEX sorted in known[], and the ru and pt-BR descriptions name the Boost option as the menu does.
TOTK_TRACE=perf logs every 600 presents the frame start to present time, and with Reflex on how many of the driver's
reports (vkGetLatencyTimingsNV) came back with every marker and their simulation start to GPU render end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Enable VK_NV_low_latency2 and VK_KHR_present_id with present ID features
- Add VkSwapchainLatencyCreateInfoNV to swapchain creation
- Link present and submission IDs with standard Vulkan latency types
- Insert latency markers: simulation start/end, input sample, render submit, and present
- Gate all extensions and latency chains on reflex != off (RESTART setting)
- Log graceful notice when Reflex is requested on unsupported hardware
- Add UI menu setting and translations for en, ru, pt-BR, zh-Hans
- Document reflex setting in totk.ini.example and docs/settings.md
The climb velocity step (1.4.3 main+0x1f49754, 1.2.1 main+0x1918220) multiplies the requested velocity by Nintendo's
factor for a movement loss that grows with the frame rate. 1.4.3 fits it at 30 and 60 fps and caps it at 2 from about
77 fps (63% climb speed at 120, 34% at 240); 1.2.1 has no 60 fps branch (78% at 60). Below a 1/60 s step the set climb
continues the factor with a curve fitted to a replayed ladder climb, taking the patch page's frame ratio without the
time scale, so 30 and 60 fps keep the shipping factor bit for bit, slow motion included. Only the player's climb
modules reach this code. Its own setting, climb_fix under [frame rate], with a menu toggle; off without the real-time
step. Ladder replay, 1.4.3: 1.665 / 1.663 / 1.669 / 1.681 m/s at 30 / 60 / 120 / 240 (shipping 120 1.046, 240 0.563).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The setup wrote romfs-patches-xbox and romfs-patches-xbox-label for 16:9 only, so prompts = xbox on a 21:9, 32:9,
16:10 or 3:2 screen (the Steam Deck's 1280x800 among them) kept the game resolution at 1920x1080 (cfg.c) or, with
output_res set to the screen's shape, fell back to the Switch prompts. #979 fixed this for prompts = pc; this extends
the same mechanism to both Xbox folders, the shared-files option of #378 by way of #979's --reuse.
- The setup builds romfs-patches-xbox-<w>x<h> and romfs-patches-xbox-label-<w>x<h> for each of ASPECT_SIZES, from
their 16:9 folder with --reuse, as it does for romfs-patches-pc-<w>x<h>.
- romfs.c overlay_init: at a game resolution of another shape any prompts' folder loads from <folder>-<w>x<h> in place
of romfs-patches-<w>x<h>, not only the PC one; without it the Switch prompts stay, and the log names the missing
folder and the command that makes it. romfs_shaped_pc_ready becomes romfs_shaped_prompts_ready(folder, w, h).
- cfg.c: the display-shaped output_res default applies with prompts = xbox when the folder of the pad layout
(romfs-patches-xbox with the Nintendo layout, romfs-patches-xbox-label with any other) is there for that size.
- The menu's note for a missing shaped folder reads "off at this game resolution (no layout made for it)" in every
menu language, since 16:9 is no longer the only shape with prompts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
UHD Graphics (i3-1215U, i3-1305U) and Iris Xe drew coloured noise on foliage with dynamic alpha to coverage and black
patches over the scenery with dynamic vertex input; players confirmed that vk_dyn_a2c = 0 and vk_dyn_vertex = 0 clear
both. vk_caps.intel_igpu_win marks Intel's proprietary Windows driver on an integrated GPU, and both defaults follow it.
An explicit ini value still wins. Arc discrete GPUs and Mesa's ANV keep both on: no report there, and the ANV report
(#989) had both off with its glitch still present.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
replay_workers = N (0, the default, keeps the sequential replay) records a submission of enough draws in chunks that start between passes, on N threads and in twice as many chunks, and submits them in order. In the town at 4K on an RTX 5070, 4 threads take the replay from 8.2 to 4.5 ms a frame and the frame rate from 71 to 79.
A sequential scan on the submitting thread applies only what is queue state (fixed-function and bind ops, render targets, render enable and conditions, samples-passed counting) and keeps a copy of it where each chunk starts, with how far its lists got: inline uniform updates, RENDER_COND results, contact shadow marches and the ops that drop uniform copies. A chunk takes those from the lists instead of from the chunks before it, starts with every image in GENERAL and ends with a full barrier, so its recording depends only on the copy and the lists.
Each thread records with a context of its own: the replay's memos, descriptor state, occlusion query segments and per-command-buffer state moved from file statics into VkExec and VkExecDraw, and the tables the contexts share (stand-ins, depth twins, views, mirrors, timestamps, completion callbacks, crumbs) take locks or atomics. The scan makes render targets live in replay order and notes the op (vk_texture_revive), since a chunk can sample a storage before the chunk that renders it got there or after the scan went past a later target there: a chunk's texture slots resolve as of its own op, and the chunks after a texture with no entry yet wait for the chunk that makes it. Uniform copies are dropped at the op that writes them (vk_usnap_drop_at).
Contact shadows plan their march in replay order (vk_contact_plan) and the chunk that holds its op records it; the HDR source keeps the copy that comes last in replay order. DLSS and fxaa = 0 act on the frame draw by draw and keep the replay sequential. TOTK_REPLAY_STATE_CHECK=1 compares the state after the last chunk with the scan's.
A draw or dispatch whose shaders write storage buffers drops the uniform copies they cover from its own op on, as the other GPU writes do (scan_writes). The scan still translates no shader: it reads the shaders the recording contexts translated from a table shared with them (vk_exec_draw_writes), and an op whose shader no context translated yet holds the chunks after it until it is recorded. Before, the chunk that recorded such a write dropped the copies for every position at that moment, so a later chunk recorded first bound the copy taken at the submit call: on an RX 7800 XT on RADV the grass near the camera came out dark or unshaded in some runs with 4 threads.
TOTK_TRACE=perf counts the chunks held per submission by reason and logs when each chunk of the last submission began. The settings menu has the thread count under Advanced, Scheduling, with the count this run uses under it.
The recorder thread begins, ends and submits the submission's open part (vk_rec.c rec_end_cb), so a chunk's mirror prologue stays off it: vk_sync_part waits until the recorder is idle, as the part pool allows one thread at a time, then records, ends and submits the prologue itself. Through the recorder the prologue could reach the queue before it was ended, and the GPU lost the device at the title screen.
(cherry picked from commit b94e2e9642)
The game picks a scene tier of 100, 90 or 80 % mostly from a fixed cost model made for the Switch that grows with the
scene width squared, so on a wide output it drops to 80 % on any GPU: at 5120x1440 every frame drew 80 % of the scene.
Patch set fixres replaces the one instruction that moves the tier's scale into the controller's result (1.2.1
main+0xcc2c00, 1.4.3 main+0x5848a8 as MacNativeGames patches it) with 1.0. The new setting dynamic_res (menu toggle,
live) brings the game's stepping back and is on by default in the Steam Deck profile.
The scene cap goes from 4096 to 8192 a side, so render_scale above 80 works on a 32:9 output, and the scene also stays
within a DynamicTextureAllocatorMem under 2 GiB; the log says when it was made smaller. The memory selftest now maps
past the real pool size instead of a fixed 4 GiB, which a larger scene grows past.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
963901c added the Speakers row (stereo or 5.1) in English and Russian only, so --probe-services failed: menu text ids 189 to 193 lacked pt-BR and zh-Hans, and the menu showed them in English in those languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A host thread adds each second in which the window has the focus and the game presents frames, keeps the total in
<profile>/playtime.txt (every 30 s and at exit) and the Game tab of the settings menu shows it with this run's share.
Texts in English, Russian, Brazilian Portuguese and Simplified Chinese. Closes#720.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 72 mouse_direct sites of patches-v143.txt mapped to the 1.2.1 main by enclosing function, each original word
checked: the camera input update, free orbit, Ultrahand and the 16 player camera modes. 1.2.1 keeps some values in
other registers and stack slots (camera input x in s11, orbit angles at sp+0x3c/0x40, Ultrahand x in s9), so the
hooks read a per-version MouseLayout; the 1.4.3 values and behaviour are unchanged.
Where 1.2.1 adds a turn in a shared helper, the degrees go to the store of the helper's result (Aiming's pitch
target, new ROLE_BASE_STORE) or to the turn it is given (Horse yaw). Wakeboard, ShieldSurfing and Tail read the stick
twice (REPEAT on the first read), the dialogue cameras' angle loads are pre-indexed (mov -> add, as ClimbObj).
The player state (ability, bow in hand) is not known on 1.2.1 and reads as not found.
tests/mouse_direct_check.py runs the hooks with both layouts and checks each load-site table against its patch file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The level picker is the same function in 1.4.3 (main+0x1ee8424) with the same first words and an early return straight
to its ret, so the lod site takes the 1.2.1 words as they are. The graphics settings setup (main+0x5868c4) inlines the
getters that 1.2.1 calls, and their slow paths come back before the compare, so the steady site is the compare itself:
w10 is set to 9 there and the list walk is skipped to the epilogue, which does not read w10. The menu texts, README and
totk.ini.example now name both versions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Button prompts row gets a third choice, PC: every button glyph of the game's button font and every image of the
button guide is drawn as the key or mouse button the keyboard defaults press it with (E, Shift, Space, left click, Q,
R, right click, F, Tab, M, 1 to 4, W A S D, Ctrl, C) and the right stick as the mouse, whatever the pad layout. The
setup writes romfs-patches-pc next to the Xbox folders (make_romfs_patches.py --prompts pc, button_icons.py pc_icons);
--binds <totk.ini> draws the keys of its bind_ lines instead. At a game resolution of another shape the game takes
romfs-patches-pc-<w>x<h> (--prompts pc --aspect) in place of romfs-patches-<w>x<h> when it is there.
(cherry picked from commit 3f81cf02be664100bd9c569c53588d620d90b527)
#483 draws the stick glyphs on the wrong code points: U+E056 and U+E057 (the stick presses) get WASD and the mouse,
U+E05E and U+E05F (the sticks) get Ctrl and C, and both left-stick HUD images show Ctrl. #585 maps them by the game's
font and keeps each glyph's advance.
This reverts commit cd35ffa.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
G (bind_SHAKE, keys only) swings the right stick left and right for 0.8 s, longer while held, so a part comes off
without shaking the arrow keys by hand. The pad keeps shaking its own stick. Remappable in the Controls tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mouse_mode now defaults to direct: on 1.4.3 the camera turns by the raw mouse motion; 1.1.0 and 1.2.1 have no hooks
and keep stick emulation, and no setting changes the gamepad. The Controls tab gets a "Mouse in the game's menus" row
for menu_cursor, and the mouse rows are in all four catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>