The game lays its interface out in a 1920x1080 space and draws it over the whole output, so at 1280x800 every menu and
the HUD were 11 % taller than drawn, and at 21:9 34 % wider. tools/aspect_layouts.py rewrites the layout archive for
each shape: every layout's root pane scaled back, full-screen backgrounds kept full, the HUD moved to the screen's
edges, and the minimap, place name and dragon's tears map icon animations adjusted. It follows the behaviour of
Fruithapje21's TOTK-Ultrawide (GPL-3.0, read for behaviour only) and checks every original value before it writes.
make_romfs_patches.py writes the results to romfs-patches/16x10 and 21x9 at install and build time, and romfs.c serves
the one of the output's shape. resolution.c accepts 16:9, 16:10 and 21:9; another shape draws 16:9 with bars. The
menu lists the game resolutions by shape. Checked on 1.2.1 and 1.4.3 at 1280x800 and 3440x1440: HUD, minimap,
inventory, map, system tab and loading screen.
The aspect patch set (recomp/patches-v121.txt) makes the world camera's DefaultAspect parameter default, the two
camera-viewport updates that divide a 16:9 rectangle, and the five loads of the 2D canvas size read the patch page.
resolution.c writes the output's aspect and the canvas factors there (wider than 16:9 the canvas grows in x, narrower
in y) and switches the set on when the game resolution is not 16:9. The sites are those of Fruithapje21's
TOTK-Ultrawide 1.2.1 patch (GPL-3.0, read for behaviour); a heap scan of the live projections confirmed the four world
cameras take the new aspect. The interface keeps its 16:9 layout in the middle of the canvas: the per-layout edits
that move it to the screen's edges are not done.
A version without the set (1.4.3 for now) draws the largest 16:9 size inside the wanted one, letterboxed. The Steam
Deck profile now draws the screen's own 1280x800, and the menu offers 16:10 and 21:9 game resolutions.
The present fits the game's picture into the largest centred rectangle of its own aspect ratio and clears the rest to
black (gfx_fit_rect, through both the blit and FSR), so a 16:9 game on the Deck's 16:10 screen is no longer stretched;
picture_fit = stretch keeps the old fill. probe-window checks the bars as well as the picture.
device_profile = auto|desktop|deck: on a Steam Deck (the firmware's Valve Jupiter or Galileo board, or SteamDeck=1) the
keys totk.ini does not set default to fullscreen, a 1280x800 window, a 1280x720 game resolution, the game's own scene
scale, vsync and a 40 fps limit; the environment and totk.ini still win. These are starting points until measured on
the device (docs/tester-guide.md, Steam Deck).
Both stick clicks (L3 + R3) step the performance overlay as F10 does, for a controller with no keyboard. The menu offers
1280x720 and 1600x900 game resolutions and 40, 45 and 90 fps limits.
Shared runtime code now goes through runtime/platform/platform.h, implemented by platform/win32.c and a new
platform/linux.c: futex locks, a userfaultfd and PAGEMAP_SCAN write watch, signal-based async preemption, our own
fiber switch, and a SIGSEGV handler for the thaw and crash hooks. The window, input, menu and software keyboard get
SDL3 back ends beside the Win32 ones, with the swapchain (gfx_present.c) and input merging (input.c) shared. SHA-256
replaces BCrypt, ELF builds get their own override sections, and the build tools gain Linux branches.
On Linux the selftest and the gfx-abi, astc, nvn and window probes pass. probe-vkmem still fails: imported guest
memory cannot be write-watched on Linux, which the shadow buffers in vk_memory.c will address.
Every Switch button and the eight stick directions the keys drive get two key cells and a controller cell under the
button layout. A cell takes the next key, mouse button or controller button pressed; a key in use moves over, a
controller button swaps. The tab writes bind_ lines (new: bind_LSTICK_* / bind_RSTICK_*, key:default, pad:default) and
input_win.c builds the tables again when one changes, so remapping applies while the game runs. More keys can be
bound: Enter, Backspace, right Shift and Ctrl, Alt, the numpad, punctuation, F2-F7, F9, F12, mouse buttons 4 and 5.
Alt alone no longer enters the window menu loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gamepad map was by position only, so on an Xbox pad the button labelled A pressed Switch B. pad_layout = auto
(default) keeps the Nintendo layout for a pad whose east button SDL reports labelled A and uses the Xbox layout (south
A, east B, west X, north Y; cross A on a PlayStation pad) for the others; nintendo and xbox force one. It applies at
once; bind_ lines name physical buttons and apply on top of either layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The left stick now moves the menu cursor as the D-pad does (ImGui only scrolled with it). The page's rows are a
direct NavFlattened child of the menu window: behind a second child level ImGui did not clip them, so up from
Continue went to the tabs and down from the tabs to Continue.
The full overlay reads temperature, board power, clock and GPU load from ADL's PM log on AMD GPUs (matched by PCI
bus), and shows the window, game image and 3D scene sizes, the scaling to the window (FSR and its sharpness), the
frame limit and the presentation mode in use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The output and scene patch sets make the game read its output, swapchain and scene sizes from the patch page
(MacNativeGames' sites for 1.2.1 and 1.4.3); resolution.c picks them from TOTK_OUTPUT_RES and TOTK_RENDER_SCALE and
grows the HeapDef texture heap, its parent and the application pool to match. vk_fsr.c runs AMD FSR 1 EASU and RCAS
on the present when the window is larger than the game's output (TOTK_UPSCALER, TOTK_SHARPNESS).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tex_info resolved the slot, built a view key, probed the view table and looked up the sampler for every texture
binding of every draw. A direct-mapped memo keyed by handle, resource type and separate returns the descriptor while
vk_texture_slots_gen, vk_sampler_gen, the submission epoch and (with feedback-loop images) the pass are unchanged;
storage images are not kept. TOTK_TEX_MEMO=0 turns it off, =check recomputes every hit (a fight run with it and
TOTK_SHADER_MEMO=check stopped on nothing). Against main, profiler on, no bind stats: fight replay 13.9 to 11.9 ms per
frame, render thread busy 16.3 to 14.6 ms, CPU-bound windows 15 to 9; field replay 9.5 to 8.2 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
answers_for looked up the type of all 64 texture and image handles of a stage whenever one changed; the use mask of the
first shader of each program stage now limits it to the slots that select the variant, with a generation per slot and
the texture lock taken only on a miss (texture type recomputations per draw 0.39 to 0.05 in fight). prepare_draw keeps
the previous draw's pipeline info while the pipeline state is equal (TOTK_PIPE_MEMO), and reads the clock only for
draws that may wait. Fight on the 7900X: replay 15.7 to 14.0 ms per frame, 53.3 to 58.7 fps; field 11.1 to 9.5 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reset asks first in a modal; B and Esc close the modal instead of the menu. The validation layer row is greyed out when the layer is missing. Option rows get whole-pixel heights: with a fractional height ImGui's truncation grew the page a pixel per row scrolled out of view, which cut off a row scrolled to the bottom. The first row taking the cursor scrolls the page to its top, so text and a heading above it show.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel's columns are as wide as the widest value they can show and the numbers are right-aligned, so the panel keeps its width while the numbers change. It sits in front of the open menu. FPS mode keeps its one line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_FPS_LIMIT (fps_limit in totk.ini, live, menu row on the Game tab) replaces the 30/60 choice of TOTK_FPS60. The
pacer holds frames to the limit in nanoseconds instead of 60 Hz ticks; the real-time step has no lower bound, so game
speed stays 1.000 above 60. `display` follows the exact refresh rate of the window's monitor (QueryDisplayConfig),
measured again when the window moves or the display mode changes. A limit of 30 switches the patch set fps60 off as
before; unset, the older fps60 = 0 still means 30. Above 60 needs the real-time step and is marked experimental.
The vsync event stays at 60 Hz: on 1.4.3 the title runs at 144 fps with it, so the game does not wait for it each
frame. Field on machine A: 69-88 fps, CPU-bound (GPU 3.4 ms per frame).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rows read and write their key through cfg, mark the default, say "after restart" for start-only settings and grey out what an environment variable fixes; totk.ini is written 0.4 s after the last change and when the menu closes. The graphics card list comes from the Vulkan devices, the window sizes from the monitor, and the language names of Japanese, Korean and Chinese are drawn with glyphs merged in from a system font (plat_font_path). The font atlas and style follow the window height. TOTK_MENU_TEST saves one shot per tab and ignores real input meanwhile; TOTK_MENU_TEST_SET sets settings at given frames (SAVE=1 writes totk.ini). A background test window going fullscreen no longer comes to the front or takes focus, and the log names the present mode the swapchain gets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The window follows TOTK_WINDOW_SIZE, TOTK_FULLSCREEN and TOTK_VK_PRESENT while the game runs, and F11 saves the fullscreen state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>