prepare_draw sets ex->volume_bias where the draw's dynamic state changes, so record_fixed reads a flag instead of
checking the pipeline state on every draw. A census of the matching draws in the field, the town and rain found two more
states with the same blend and depth signature, both tested GREATER: the volume's back faces into the same channel and
another shader's front faces into red. GREATER's equal case fails, and the bias toward passing turned the game's tie
the other way for them; they are now left as the game sets them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1. scan_pads took a controller Steam hid when the virtual pad was not up yet and kept it for the session, so Steam's
remapping was lost. While the open pad is a hidden one, pad_physical looks again every RESCAN_MS and scan_pads
moves the buttons to the virtual pad; the hidden controller stays open as motion_extra, so motion goes on with
the same bias and orientation.
2. pad_identity marked " (under Steam)" only on motion_extra; a hidden controller that became the pad lost the mark
and could take the bias calibrated with Steam closed. The mark now follows steam_hidden_id.
3. After pull request #1024: sensors_ready logs SDL_GetError when the pad has both sensors but enabling them failed,
instead of "has no gyro and accelerometer".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A game Steam starts gets SDL_GAMECONTROLLER_IGNORE_DEVICES with the controllers Steam reads itself and sees Steam's
virtual gamepad, which has no motion sensors. input.c steam_reveal keeps that list and clears the hint before
SDL_Init (only with motion on); scan_pads still takes the virtual pad for buttons and sticks, so Steam's remapping
holds, and motion_source opens the hidden controller for its gyro and accelerometer only. A bias belongs to the pad
as Steam presents it: " (Steam Input)" or " (under Steam)" in gyro_bias_pad. docs/controls.md, "Steam Input and
motion", says the Steam layout must bind the gyro to something or Steam zeroes it on the Steam Controller.
The patch as posted against 6151ac4, with sensors_ready merged with #1274's restart. Tested by the author on Linux
(Steam Controller) and the Steam Deck; not on Windows.
Co-authored-by: St5sz2Jk <St5sz2Jk@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The calibration removes the bias measured once; a bias that moves as the controller warms up, or a controller never
calibrated, still turns the aim slowly. motion_fusion.c drift_track learns it from 256 ms windows in which the gyro
stays within 0.04 rad/s and the acceleration within 0.03 G peak to peak, after half a second of rest, with a time
constant of 0.25 s until the estimate settles and 30 s after. The estimate sits on top of the calibrated bias and is
cleared with a new controller, a new or loaded calibration and a change of gyro_calibration. New setting
gyro_auto_bias (live, default 1).
Taken from #380: the rest window by peak to peak, the two time constants, the per-axis limit. Left out: the
0.006 rad/s dead zone, which ate slow aiming; the one global state shared by every fusion instance; the reset at
every StartSixAxisSensor; the 0.5 G acceleration gate, which let a controller in motion count as still. The first
estimate is limited to 0.1 rad/s from zero instead of 0.15; a larger bias is the calibration's job.
Also: a sample without a reading at a restart (#1274) no longer returns before the calibration's log and save.
--probe-services checks the drift with the switch off and on, after a calibration whose bias then moved, a slow
aim in the hand, and the levelling of #1274 with a bias on every axis.
Co-authored-by: airquark <97342227+airquark@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It acts only with sync_ahead in effect and is on by default there, so a player who turns on sync_ahead gets it; 0 and check stay for comparing. docs/settings.md keeps the row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The new line is written for wb_eager 0, 1 and check alike, so the stall wb_eager removes can be compared between the settings. It costs a clock read only on the blocking path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dlaa_effects_after moves to the Screen tab under the DLSS rows, to [display] in totk.ini and totk.ini.example next
to dlss_char_mask, and vk_dlaa_frame reads it after the dl_active check, so a game without DLSS does no new work
per frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With sync_ahead on, the fence write-back of small GPU-drawn targets that the game reads back still blocked the game thread behind the running frame, about every ninth frame. wb_eager copies those targets into staging at the end of the submission that rendered them, so the write-back at the fence wait needs no GPU wait.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
recomp/patches-v121.txt gets set fov on the two camera routines the aspect set already patches, at the load of the
camera's vertical view angle (+0x13c): camera update main+0xcb4ad8, camera setup main+0x1252194. The update site matches
1.4.3's instruction for instruction around the load; the setup site copies the camera's fields with other instructions
and registers before it and matches 1.4.3's from the load on. Both call sinf, cosf and tanf in the same order as on
1.4.3. Each version fills sead's perspective projection this way in ten places, each with its counterpart in the other
version: these two camera copies, which are the only places 1.4.3 patches, and eight others (inlined copies, projection
routines and four projections on the stack), none patched. The replacement words are those of the 1.1.0 and 1.4.3 sets
(x10 kept on the stack, s8 overwritten by the next instruction), so no register liveness is assumed. #621 (ipavlin98,
closed by its author) chose the same two sites with x8 and s2 as scratch registers.
The setting's text in totk.ini.example and in the four menu languages names 1.2.1, and the comment of
runtime/resolution.c res_fov_live names the patch files of all three versions.
Co-Authored-By: Claude <noreply@anthropic.com>
The game thread hands its sound commands to the audio thread in lists: 16, of which 4 are always held, so at most 12
wait in the command ring. The game thread submits at most one per update (1.2.1 main+0x9bd144), the audio thread
takes one per 5 ms audio frame (after a list, main+0x883780 goes on past the ring's check). Above about 200 updates a
second the ring stays full. The game's guard (main+0x9bcdc4) counts the updates that find the ring of free lists
empty and exactly 12 lists in the command ring (0x9bce1c cmp w9, #0xc); the count returns to 0 only when a free list
is there. At every multiple of 300 (10 s at 30 fps, 1.25 s at 240) it clears the sound command switch
(main+0x2268bfc) and stops every active voice (main+0x226f29c). Only the switch's constructor sets it to 1
(main+0xf31ce8, from the engine's init main+0xf31530), so the game is silent until it is restarted.
Measured on 1.2.1 (Linux, RX 6750 XT), same save and scripted input, mix dumped without a device: with fps_limit 60,
144, 180, 200 and 201 the mix has sound; with 205, 210, 220, 230, 239 and 240 it goes silent after the boot logo and
stays silent, also at the 130-148 fps of the scene that follows. The guard is read from the code; the switch going
to 0 has not been observed in a run.
The set audiodrain (TOTK_AUDIO_DRAIN_FIX, audio_drain_fix, on by default) sends the audio thread back to the ring's
check after each list, so it takes every queued list in the pass: one site per version (1.2.1 main+0x883780, 1.4.3
main+0x149244), each going to a target the game's own code already branches to in the same way (1.2.1 main+0x883c18,
1.4.3 main+0x149700). The setting is in runtime/cfg.c, totk.ini.example and docs/settings.md.
At fps_limit 240, 120 s runs of one build per game version with the set switched, seconds with sound in the mix: on
1.2.1 5 of 118 with the set off and 108 of 118 with it on; on 1.4.3 2 of 118 off and 110 of 119 on. Not run:
Windows. Not covered: 1.1.0, whose main we do not have, so its table has no site and it keeps the game's code.
Co-Authored-By: Claude <noreply@anthropic.com>
plugin_init.c reads TOTK_PLUGIN_TRACE through cfg_bool, which stops the game when the key is unset and metas[] has no
row. Every test run set the key, so only a plain start hit it. tests/settings_doc_check.py now fails on any
cfg_value/cfg_int/cfg_double/cfg_bool reading without a metas[] row that is not guarded by cfg_get of the same key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rebuild for ExeFS patches, code cheats and mod plugins ran the setup window from the setup folder, whose absolute
path build-cache/rebuild.txt held, with the generated C and objects in that folder's temp/. A moved or deleted setup
folder left code mods without a rebuild.
- A new Kit step after the check copies the release folder without TotK-Setup.exe into <game>/build-kit
(installer/layout.py KIT_ITEMS), and every later step runs its tools from there. A newer setup replaces the kit,
the kit's own rebuild keeps it.
- The release's temp folder is <game>/build-cache/work, so the lift cache and the objects stay with the game.
- rebuild.txt names the kit relative to the game folder; runtime/cheats.c and runtime/romfs.c resolve relative
entries against the exe's folder.
- runtime_key drops the lines of clang --version that name its folder, so a rebuild from the kit or a moved game
folder keeps the compile and prepare steps the setup recorded.
- An update over an install of an older setup moves that setup's temp folder into build-cache/work when both are on
one disk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>