Commit Graph
1389 Commits
Author SHA1 Message Date
Pasha Kagan 3c749df3f4 Test tools/pack_shader_cache.py on a fake shader cache 2026-10-31 07:23:40 +03:00
Pasha Kagan bc84ac0b1f Add tools/pack_shader_cache.py, which folds the shader cache's loose files into shader-cache.pack 2026-10-31 07:23:40 +03:00
Pasha Kagan 2fcb09d609 Read shader translations, use masks and stored inputs from shader-cache.pack before the loose files 2026-10-31 07:23:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ff25b04cdb Merge task/fatalmem: memory commit line on fatal errors (#94)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:23:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 31fff74776 Log the memory commit charge with every fatal error
#94 ended on a realloc of 1 MiB that failed with 64 GB of commit allowed, and the log could not tell whether the
process had grown towards the limit or the system ran short. rt_fatal now adds one line with the process's private
bytes and the system's commit in use and limit (plat_commit_info).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:23:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f958a5ef71 Merge task/romfscheck: fail the install when romfs/ is unreadable after cleanup (#107)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:12:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a0ba5dfb99 Merge task/deadzone: virtual test gamepad for stick tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:12:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 753b61ebe1 Merge task/audiolat: pace audio rendering by the output device (#98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:12:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ada341e2b1 Pace audio rendering by the output device
The render thread ran on its own 5 ms timer while the device consumed on its own clock, so the queue crept: on
DirectSound it grew 2.7 ms every 5 s, which fills the 340 ms ring in about ten minutes of play. The render thread now
renders the next frame when the device has taken the ring below max(prefill, two device periods), as the audio
hardware paces the Switch's DSP and as LASRecomp and SavageWindRecomp pace their renderers by the SDL stream. Without a
device, while the renderer is stopped and while the device takes nothing for 50 ms (at least four periods) it keeps the
timer, so a stalled device does not stall the game; the ring trim then drops what piled up, measured from the target.

60 s on the monsters save: WASAPI 15 ms queued, DirectSound 27-40 ms without growth, no underruns. With the SDL audio
thread suspended for 1.5 s the game held 60 fps and the queue was back at 15 ms after one trim.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:12:48 +03:00
applezraandClaude Opus 5.5 45f24a72e3 Let TOTK_DUMP_UBO set how many vec4 of each uniform block are printed
The value is now a count (1 still means 16, capped at 4096), so blocks such as the deferred lighting shaders' camera
block, whose shadow cascade matrices sit at vec4 42 to 58, can be read from a frame dump.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:10:35 -07:00
applezraandClaude Opus 5.5 bc5eb0cb15 Narrow the sun shadow filter by the shadow map scale
The deferred lighting shaders soften the sun shadow with four compares around the receiver, offset by element 56 .xy of
their lighting block. The offset is in UV and the game sized it for its own 960x960 cascades, so with shadow_scale above
1 it spans that many more texels and the near cascade shows four separate copies of each edge. Translator patch 0011
multiplies those reads by the support buffer's new shadow_spread field in fragment shaders that sample a 2D array
shadow texture, leaving fp_c4 (the cascade matrices) alone. support_fill writes 1 / shadow_scale there, so the spacing
stays the game's in texels; at shadow_scale 1 the shaders behave as before. The support buffer grows to 1440 bytes and
build_xlate.py expects eleven patches.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 21:10:27 -07:00
Wellington Dias efe1b5db54 Check that the built hactool starts with an empty home folder, so a malformed key in the builder's own keys file no longer fails the build. 2026-10-30 21:32:12 -03:00
Wellington Dias ff72b2e241 Use the profile folder next to the game when it exists, so a copied install no longer looks for the profile at the path it was built with. 2026-10-30 21:01:18 -03:00
Seth 32fc1b35e1 Add a right-stick camera speed setting that scales the game's own turn rates
The game's five camera sensitivities (Options, Very Low to Very High) turn the camera at the rates
in the StickSensitivity array of PlayerCamera.game__component__PlayerCameraParam.bgyml, 0.8 to 2.4.
stick_sens (0.1 to 3, read at start) multiplies that array: camera_speed.c decompresses
Pack/Actor/PlayerCamera.pack.zs with the RomFS's pack.zsdic, scales the floats in place and
compresses it again with the same dictionary, and romfs.c serves the result from
<profile>/camera/. Scaling the stick's deflection instead could not raise the top speed, since a
full tilt cannot go further.

The mouse camera reaches the game as a right-stick deflection, so input_win.c mouse_camera divides
it by the same factor and mouse_sens alone keeps setting the mouse's speed.

romfs.c heapdef_overlay is split into read_served and serve_generated so both generated files
share the reading, writing and overlay bookkeeping.
2026-10-30 17:58:41 -05:00
Valiantsin DzerakhandClaude Opus 5.5 9016b1e210 Add a virtual test gamepad for stick tests without a controller
TOTK_TEST_PAD=<lx>,<ly>,<rx>,<ry> attaches an SDL virtual gamepad at start with its sticks at those raw values, so the
dead zone and the gamepad path can be tested in a run. On the field save: an 11% drift reached the game as 3.3% at the
default 8% zone (the old per-axis cutoff passed 9% on x and dropped y) and not at all at 15% (Link stood still); full
deflection reached it as full at 15%.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:46:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a76224f8a6 Fail the install when romfs/ is gone or unreadable after cleanup
An install whose romfs/ went empty and unreadable after the extraction had verified it (a folder Windows was still
deleting) ended with result ok, and the game stopped at its first file read. Cleanup now checks that romfs.bin and
index.json are still there, match the verified size and hash record, and that romfs.bin opens; otherwise it fails with
cleanup.romfs_unreadable, which tells the player to restart Windows and run the installer on the same folder (resume
extracts the game data again). Reported in #107.

tests/installer_test.py CleanupTest: an emptied, removed or resized romfs passed cleanup before, fails now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:42:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8ba0d5ce15 Merge task/amdfix: 3D BC stand-ins and recorder-ended parts for AMD RDNA2 (#5)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:39:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 efbff61306 Merge task/lowres: 1280x720 and 1600x900 game resolutions in the menu (#36)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:26:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 be4d8f5245 Merge task/sixaxis: drop six-axis samples from before StartSixAxisSensor (#104)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:26:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a90b1f4ca9 Merge task/audiolat: skip audio piled up after a device stall (#98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:26:38 +03:00
Valiantsin DzerakhandClaude Opus 5.5 58e52aa180 Merge task/deadzone: stick dead zone setting (#12 #99 #111 #115)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:26:38 +03:00
Valiantsin DzerakhandClaude Opus 5.5 605662ca87 Offer 1280x720 and 1600x900 as game resolutions in the menu
The game resolution row started at 1920x1080 although resolution.c accepts sizes from 1280x720, so weak GPUs and
integrated graphics had to edit totk.ini to draw the game smaller. A 1280x720 run on 1.4.3 renders the field with a
1067x600 scene and an intact interface.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:25:05 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7d89fde2f0 Drop the six-axis samples from before StartSixAxisSensor
motion_restart only flagged the next sample to start a fresh frame, so a read in the frame of the Start returned the
previous session's 16 states as live, and for the next 60 ms 15 of the 16 were from before it, with the angle jumping
back to zero between two reads. Motion aim was dead when the bow was first drawn and lagged after that. A restart now
hides the older samples and zeroes the angle; sampling numbers keep counting.

--probe-services checks a restart in the middle of a turn: 16 old states in the Start frame before, none after.
Reported with the cause and a harness in #104.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:22:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 42a1d32710 Skip audio that piles up in the output ring so the sound delay stays short
A stalled audio device (a wireless headset waking up, a change of the default device) filled the 340 ms ring, the
render thread then dropped new frames and the queue stayed full for the rest of the session: about a third of a second
of delay on top of the device's own. ring_pull now skips what is queued beyond the prefill, the device's request and
40 ms. The 5 s level line (trace = audio) reports the queue and the skipped frames.

With the SDL audio thread suspended for 1.5 s: before, 325-340 ms queued for the rest of the run; after, 10 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:20:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ed1973a68b Add a stick dead zone setting for drifting gamepads
stick_deadzone (0 to 50 percent, default 8) replaces the fixed per-axis cutoff of 2500. The zone is round and the
travel past it is scaled to start at 0, so a drifting stick rests centred and full deflection still reaches full.
The Controls tab shows it as a slider; --probe-cfg checks the math (input_pad_stick).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:05:54 +03:00
Valiantsin DzerakhandClaude Opus 5.5 25b200f94c Draw 3D BC textures through stand-ins and let the recorder end its parts
AMD driver 26.10.1 on RDNA2 cards wrote past the end of a 3D BC4 volume made
BLOCK_TEXEL_VIEW_COMPATIBLE and 2D_ARRAY_COMPATIBLE, which lost the device at the
logo (issue #5). 3D BC textures no longer get block views: draws into a level go
to an uncompressed 2D array stand-in that is copied back at the pass end
(TOTK_BLOCK_VIEWS_3D=1 restores the old path).

Parts the recorder thread recorded and the submitting thread ended turned the
scene green, then white, on the same driver once a submission was split. The
recorder now writes the closing breadcrumb and ends the part itself
(TOTK_REC_END=0 restores the old split). The recorder stays off on AMD by default.

Based on the patch Pelipooper posted in issue #5; stand-ins extended to every
mip level.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 23:50:02 +03:00
TotK localandClaude Opus 5.5 1512d9ed65 Add NVIDIA DLAA and a switch for the game's FXAA
DLAA runs DLSS at the scene's own size on the R11G11B10F light target, right before the bloom chain's first pass,
so bloom, post and HUD read the anti-aliased picture. NGX is loaded from the driver's NGX core at run time; no NVIDIA
SDK code is compiled in, and nvngx_dlss.dll goes next to totk.exe. The scene's draws get a Halton(2,3) viewport
jitter that steps after each DLAA run; camera motion vectors come from the scene depth reprojected through this and
last frame's view-projection of the scene camera block (c4), read from the uniform snapshot. One DLSS feature per
scene size keeps dynamic resolution from stalling. dlaa and fxaa switch live from the settings menu; fxaa skips the
draw of the game's FXAA pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 03:34:55 +08:00
Wellington Dias 6b4b228fdd Name no operating system in the oe log lines, so Linux logs stop saying Windows.
The application environment and performance request lines and the services probe's locale line said Windows on every
host; a Steam Deck tester's log printed them on SteamOS.
2026-10-30 16:32:49 -03:00
Wellington Dias 7285688165 Give the interface its proportions at 16:10 and 21:9, and limit game resolutions to those shapes and 16:9.
The game lays its interface out in a 1920x1080 space and draws it over the whole output, so at 1280x800 every menu and
the HUD were 11 % taller than drawn, and at 21:9 34 % wider. tools/aspect_layouts.py rewrites the layout archive for
each shape: every layout's root pane scaled back, full-screen backgrounds kept full, the HUD moved to the screen's
edges, and the minimap, place name and dragon's tears map icon animations adjusted. It follows the behaviour of
Fruithapje21's TOTK-Ultrawide (GPL-3.0, read for behaviour only) and checks every original value before it writes.
make_romfs_patches.py writes the results to romfs-patches/16x10 and 21x9 at install and build time, and romfs.c serves
the one of the output's shape. resolution.c accepts 16:9, 16:10 and 21:9; another shape draws 16:9 with bars. The
menu lists the game resolutions by shape. Checked on 1.2.1 and 1.4.3 at 1280x800 and 3440x1440: HUD, minimap,
inventory, map, system tab and loading screen.
2026-10-30 16:23:58 -03:00
Wellington Dias b7baf43332 Keep the Linux setup's temp files and Mesa's shader cache with the game, and stop the setup with one message on a glibc older than 2.34.
A Steam Deck tester had 1.2 GB free in /home, where the setup put its 1.3 GB of generated C and objects
(~/.cache/totk-setup) and RADV its shader cache (up to 1 GB, about 35 MB a minute at the title screen), while the game
goes to the SD card. The setup's temp is now .setup-temp in the install folder (--temp changes it; the empty-folder
check leaves it out), and totk points MESA_SHADER_CACHE_DIR at mesa-cache beside itself unless it is set. A scan of
every ELF file in the release folder showed the bundled LLVM and the cryptography wheel need glibc 2.34, not the 2.31
the docs gave: make_release_linux.py now checks that floor (check_glibc), the setup's check stops below it
(check.glibc_old) instead of failing on a compiler that cannot start, and the docs give both floors. The Linux notes
also record the testers' results, that the Deck has the host-import extension too, and its software ASTC decoding.
2026-10-30 14:56:54 -03:00
Wellington Dias 48d1a6d3a0 Build the release from either game version's generated C, so a checkout with only 1.4.3 can make it.
make_release.py and make_release_linux.py built the runtime library and the --prove build from generated/v121 alone.
The library reads only what both versions' layout.h share (MOD_COUNT, MOD_MAIN_BASE), so both scripts now take
generated/v121, else generated/v143, pass its --version, and name extract.py and gen.py when neither exists.
2026-10-30 14:56:25 -03:00
Wellington Dias 021413740d Keep the game in focus by default, so switching windows during a load no longer stops it for good.
The game sets focus handling mode 2: on a Switch the system then suspends the whole process while it is out of focus.
Here only its main thread stopped, in PopNotificationMessage, while the loader threads, audio and clocks ran on, and a
tester on Hyprland with 1.4.3 saw a load never finish after the window lost and regained the focus; TOTK_ASSUME_FOCUS=1
avoided it. That is now the default (assume_focus in totk.ini, as MacNativeGames always reports in focus); 0 restores
the pause. Each focus change is logged, so a report shows whether the window saw it.
2026-10-30 14:56:13 -03:00
Wellington Dias ba4eae2123 Make BC 3D textures with block views on GPUs whose driver cannot lay them out as render targets, so agl's BC4 volumes exist on Vega.
RADV on GFX9 returns a 0-byte image for a mipmapped block-compressed 3D image with COLOR_ATTACHMENT usage and no
STORAGE (the usage asks for a thin layout the GFX9 address library has no swizzle mode for), and VMA then fails the
allocation: "image creation failed (-3): nvn fmt 0x49 32x32x32" on a Ryzen 5 4600G. create_tex checks the size the
device wants for such an image and, when it is 0, adds STORAGE usage, which keeps RADV on a thick layout; the replay
never sees that usage. If the device still cannot lay it out, the image is made without block views. bind_pool_memory
refuses a 0-byte image. Forcing the storage path on an RX 7800 XT renders the same frames.
2026-10-30 14:56:03 -03:00
Wellington Dias 7766716e16 Fill a window one pixel wider than the picture, and let the probes use the shader census of either game version.
gfx_fit_rect rounded the picture up to an even size, so at 1167x656 a 16:9 picture was 1166 wide and the last column
stayed black, which failed --probe-vkexec; it now takes the window's parity, which keeps the bars equal at any size.
The present check of --probe-vkexec expects the picture's rectangle and black bars, as --probe-window does, so it
passes on a 16:10 screen too. --probe-shader, the draw part of --probe-vkexec and the pipeline self-test looked only
for build/v121/shaders; probe_census_dir takes the running version's census first, then the other one's. The Linux
notes say what the probes need over SSH.
2026-10-30 14:55:55 -03:00
Valiantsin DzerakhandClaude Opus 5.5 fb06577c23 Target Windows 10 in the runtime flags so llvm-mingw sees the DPI functions
llvm-mingw's headers default to Windows 7 and hide AdjustWindowRectExForDpi, GetDpiForWindow and the other per-monitor
DPI functions, so the release toolchain failed on gfx_window.c and dpi_probe.c. MSYS2's headers already default to
Windows 10, the port's minimum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v0.1.6
2026-10-30 20:54:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6c27e70249 Raise the version to 0.1.6
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:51:22 +03:00
Wellington Dias 08df794360 Move the aspect words of the patch page to +80..+91 and list the words in use, so other patch sets can take +56..+79.
The shadow cascade range of a pending change loads its four distances from +64..+79 on 1.4.3, where the aspect and the
canvas factors were; with both on, the camera would have read a cascade distance as its aspect. recomp/patches.py now
lists the words each set uses.
2026-10-30 14:35:23 -03:00
Valiantsin DzerakhandClaude Opus 5.5 b0ec992afd Merge task/cubeflag: cube compatible only for cube textures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:30:12 +03:00
Wellington Dias 89b5126da0 Declare the clobbers mbedtls's x86-64 multiply asm lacks, so a clang-built hactool verifies signatures.
hactool's bundled mbedtls 2.6.1 adds into memory and changes the flags in its MULADDC asm without saying so. gcc builds
happen to work; clang, the Linux release's compiler, keeps values in registers across it at -O1 and above, so every RSA
check failed (NCA header, NPDM, ACID) and the AppImage's setup stopped at the update merge. Found by installing from the
mounted AppImage; a bisection of the mbedtls objects pointed at bignum.o, and the memory and cc clobbers (as later
mbedtls releases have them) fix it. With the patch the full install from the AppImage completes and the game runs.
2026-10-30 14:28:35 -03:00
Valiantsin DzerakhandClaude Opus 5.5 4d7fa271d4 Make only cube textures cube compatible
Every square 2D array of 6 or more layers was created cube compatible, though the replay makes cube views only of
images whose own target is a cubemap or cubemap array (vk_exec_draw.c get_view). On AMD's Windows driver the flag
changes the image layout, and Savage Wind Recomp traced rainbow blocks on terrain that moved with the mip level to
it (their issue #59, BotW on an RX 580 and a 7800 XT); our AMD and Intel reports show the same symptom (#42, #67,
#81). The flag now goes to cube targets only, on every driver.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:15:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 332dfce18e Merge task/cmpfmt: depth twins for compare-sampled colour textures in compute passes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:09:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3b5469a83f Sample compare-sampled R32F and R16 textures of compute passes through a depth twin
TotK's compute passes sample a 4x4 R32_SFLOAT texture through a shadow sampler. Vulkan allows depth comparison only
on formats with SAMPLED_IMAGE_DEPTH_COMPARISON, which AMD's drivers do not give R32_SFLOAT, so the result there was
undefined (20 validation errors in 40 s of field play). Such an image now gets a D32_SFLOAT (or D16_UNORM) twin
copied through a buffer right before each dispatch that samples it, and the dispatch samples the twin. Formats the
driver compares as they are keep the colour image. TOTK_DEPTH_TWIN=0 turns it off. Design after Savage Wind Recomp's
depth twins.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 20:09:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 fb13c05870 Merge PR #86: drop released textures that reload intact when video memory runs low
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:56:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1a689a5b1d Merge task/gpucrash: recorder thread off on AMD, GPL off on AMD's RDNA 1/2 driver, GPU breadcrumbs on a lost device
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:53:38 +03:00
Valiantsin DzerakhandClaude Opus 5.5 43704c0d9f Turn off the recorder thread on AMD GPUs and GPL on AMD's RDNA 1/2 driver, and log GPU breadcrumbs on a lost device
AMD drivers lost the device at boot or at menu opens with the recorder thread; vk_recorder = 0 ended it for three
RX 9070 XT users (issue #5), and RADV saw an illegal opcode at the end of a command buffer (issue #40). It now
defaults to off on vendor 0x1002; TOTK_VK_RECORDER=1 turns it back on.

On AMD's separate driver branch for RDNA 1/2 ("AMD proprietary shader compiler") every device loss came with a cold
pipeline cache and draws waiting on fast-linked pipelines, and the recorder setting did not help there. TOTK_GPL now
has no fixed default: off on that branch, on elsewhere.

VK_AMD_buffer_marker breadcrumbs (vk_crumbs.c) mark the start and end of each submission part, upload batch, ASTC
decode chunk and present; on device lost the log names the last point the GPU reached and the last one it finished.

vk_fsr.c ensure_images held no queue lock around vkDeviceWaitIdle, which needs every queue externally synchronized.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:48:38 +03:00
itaskaev2andClaude Opus 5.5 24571ec0b0 Add soft sun shadows (PCSS) through a translator patch
The deferred lighting shaders take the sun shadow as four explicit-LOD compares on the cascade array. Translator patch
0010 turns every explicit-LOD compare on a 2D array texture into a PCSS lookup when the support buffer's new pcss
field has x above 0: eight raw depth fetches within pcss.w find the blockers, (receiver - blocker) * pcss.x gives the
penumbra width clamped to pcss.y..pcss.z, and eight compares on a disc of that radius average to the result. With x at
0 the original single compare runs behind a branch. Radii are in UV, so they hold at any shadow_scale.

The support buffer grows to 1424 bytes; support_fill writes the field from pcss (percent of the default width, 0 to
200, default 0; TOTK_PCSS_K overrides the factor at 100 percent, default 0.5). build_xlate.py expects ten patches. The
setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:00:23 +01:00
itaskaev2andClaude Opus 5.5 4af60604de Add screen-space contact shadows
TotK fills a full-resolution G-buffer with a B10G11R11 scene colour, an R32F linear depth and a D32F depth, lights it
in half resolution, and composites the lighting into the scene colour in one pass whose only target is that colour,
with a D16 class depth. vk_contact.c recognises both passes, and when the pass after the composite begins (or a
dispatch or copy comes first) runtime/shaders/contact_shadow.comp marches each pixel 16 steps toward the sun through
the linear depth and darkens the scene colour where nearby geometry blocks the ray: the small shadows at feet, under
stones and in grass that the shadow maps miss. Transparent surfaces, the sky and post-processing come after.

The projection, far plane and sun direction come from the fragment stage's 0x940-byte camera block (c4): c4[7].x,
c4[8].y, c4[14].y, and the first cascade's depth row c4[44].xyz, whose negation points toward the sun. Scene colour
images get STORAGE usage while the setting is on.

contact_shadows (percent strength, default 0) is in totk.ini.example and on the Screen tab of the menu (English and
Russian). TOTK_CONTACT_DEBUG=1 shows the shadow factor in grey instead of the frame. It costs about 0.45 ms per frame
at a 3840x2160 scene on an RTX 4080 SUPER.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:29:53 +01:00
itaskaev2andClaude Opus 5.5 386e70453b Add a shadow cascade range setting for 1.4.3
The sun's shadow cascades end at 20, 40, 80 and 160 m: the depth shadow parameter object (main+0x6fa3c0) registers
depth_shadow_near_0_1..3 and depth_shadow_far_0 as immediates, and the field's .bgsdw files do not override them. The
new cascade patch set reads the four distances from patch page +64..+76 instead, and shadow_range (percent, 50 to 400,
default 100) writes them there at start, so the visible steps where shadows turn softer move away from the player. It
spreads the shadow map over more ground, which shadow_scale pays back. Only patches-v143.txt has the set; on 1.2.1 the
setting logs that and does nothing.

The setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:06:58 +01:00
itaskaev2andClaude Opus 5.5 bfb4933531 Add shadow map resolution and anisotropic filtering settings
TotK draws its sun cascades into a 960x960 DEPTH16 array of 4 layers, and its static shadows into 1440x1440 and
720x720 arrays of 2, whatever the output resolution, and shrinks the cascades under load. shadow_scale (1 to 4,
default 1) creates those images that many times larger on each side: passes into them scale the game's viewports,
scissors and support-buffer viewport size, and copies scale their regions, so the game is unaware of it. Images the
CPU writes or that alias pool memory keep their size. When the maps are enlarged, depth-compare samplers filter
linearly, because the game's few nearest taps are spaced for its own texels and leave hard, stepped edges otherwise.

aniso (game, 2, 4, 8, 16; default 16) raises anisotropic filtering of linear mipmapped colour samplers; depth-compare,
nearest and unmipmapped samplers keep the game's setting.

Both are in totk.ini.example and on the Screen tab of the settings menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:47:47 +01:00
Valiantsin DzerakhandClaude Opus 5.5 473acfda2e Merge task/nosleep: keep the display awake while the game window is up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:37:26 +03:00