Commit Graph
114 Commits
Author SHA1 Message Date
Valiantsin DzerakhandClaude Opus 5.5 9712658328 List the settings totk.ini.example leaves out in docs/settings.md
146 of the 254 names in known[] (runtime/cfg.c) were described nowhere for a reader: diagnostics, test hooks, paths and
experiments. docs/settings.md gives each one what it does, the effect of changing it and a safety level. The rows come
from reading the code, and most effects have not been checked in a run.

tests/settings_doc_check.py fails when a known name is in neither file, when the page lists an unknown name, or when a
default on the page differs from metas[] or an rt_knob call.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 10:18:50 +03:00
Tempus3214andClaude Opus 5.5 a1cd122625 Give the mouse the same degrees per count in every player camera, and fix the soothe button and the mouse shake
Only the free camera took the mouse as degrees. The other camera modes took it as stick input, which their own speeds,
frame time, slow motion and curves reshaped, with the on-foot camera's square-root pitch shaping on top: bow aiming was
far too sensitive vertically on slow movements, abilities and the Purah Pad camera eased their pitch, lock-on turned
27% slower, and climbing, shield surfing and the rest each turned at their own rate.

Each camera mode's update now loads the gamepad's part of the stick where it computes its turn and adds the mouse's
degrees where it adds that turn to its angle (runtime/mouse_direct.c camera_load, the load sites of
recomp/patches-v143.txt): aiming, scope, abilities (and Recall's cursor), horse, Purah Pad camera, lock-on, bow
lock-on, wall and object climbing, the waterfall's turn, shield surfing, wakeboard and the dialogue cameras. Recall's
cursor moves so that its aim turns as many degrees a count. The waterfall's height and the horse's empty lock-on are
not angles and stay stick input, now linear. A step whose mouse motion no hook took is logged with the camera's name.

Holding L to soothe the horse gave the mouse to the ability wheel's virtual cursor, a held stick for the camera: the
mouse goes to the wheel and the D-pad strips only while their screen has the focus (menu_cursor.c
menu_cursor_shortcut). A mouse shake no longer plays a 0.8 s swing after it: the right stick follows the mouse's own
swings and lets go when it rests, and the camera does not turn by that swing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 03:36:51 -03:00
Tempus3214andClaude Opus 5.5 27f64d6a29 Check the camera's player-state pointers against the guest layout instead of asking the OS
player_state follows about fifteen pointers from the player root to its action verbs, and each was checked with
plat_mem_readable, a VirtualQuery. That query costs tens of microseconds in this process, so the read stalled the
game thread while the mouse moved. mem_guest_readable answers from the layout for the committed heap and the loaded
modules, where the player and its components live, and asks the OS only for anything else. Together with the same
change in the menu pointer, a Ryzen 5 4500 runs the scene that fell to 50-54 fps at 58-60 fps again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 00:22:10 -03:00
Tempus3214andClaude Opus 5.5 27f4d40e80 Detach a fused part by shaking the mouse while Ultrahand holds an object
The game detaches a fused part when the right stick swings left and right a few times. In direct mode the mouse never
reaches that stick, so shaking the mouse did nothing and only the shake key worked. A shake of the mouse while
Ultrahand holds an object (at least three changes of direction within 0.6 s, each swing worth 10 degrees of camera turn
or more) now plays the shake key's right-stick swing. Turning a held object back and forth at an ordinary pace takes
longer and does not count.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 23:01:33 -03:00
Tempus3214andClaude Opus 5.5 55083b69b3 Give the direct mouse one turn rate in every camera and stop the pitch springing back after an aim
The free-orbit camera turned 0.08 degrees per count while the other cameras (the bow, the abilities) took the mouse as
0.01 stick units a count, about 0.023 degrees for yaw and through the camera's signed-square pitch for y, so the bow
turned at half the speed and small vertical moves barely moved it. Every camera now turns 70/1500 = 0.0467 degrees
per count: the stick path gets 0.02 a count for x and the signed square root for y, so pitch is linear and as fast as
yaw. While the player uses an ability (the action verb UseSpecialPower, read from the player actor with the 1.4.3
placement), the ability camera's own linear scales are undone instead. stick_sens is divided out, Ultrahand's held
object gets the camera's stick value a count (at most three full tilts a step), and mouse_aim_scale (0.1 to 3)
scales the mouse while the bow is drawn.

The game's lock-on, recenter and aiming override released the mouse's pitch hold and restored the target from before
it, so after a shot the camera sprang back to that pitch, or to the game's default target. The mouse now lets go
without restoring, and when the override ends (or the camera went 100 ms without a step) it holds the pitch the
camera has then. A gamepad's vertical input still hands the pitch back to the game.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:47:45 -03:00
Valiantsin DzerakhandClaude Opus 5.5 9e5a817916 Read the mouse mode with its default so direct is on without a totk.ini line
direct_mode read TOTK_MOUSE_MODE with cfg_get, which is NULL when the player never set it, so a fresh totk.ini kept
stick emulation (and its speed cap) while the menu showed Direct. cfg_value gives the settings table's default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:52:06 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5ae81ba8e6 Fix the left stick HUD images of the PC prompts and draw the shake key
In the 1.4.3 Common archive Nt_KeyTexLSt_00 is the left stick tilted up (U+E052) and Nt_KeyTexLSt_01 the left stick
(U+E05E): they showed WASD and Ctrl, now W and WASD. U+E068 (the right stick shaken) showed the mouse, which never
shakes the stick; it shows the SHAKE key (G by default).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:44:55 +03:00
Wintego cb628b08b7 Add keyboard and mouse button prompts (prompts = pc)
The Button prompts row gets a third choice, PC: every button glyph of the game's button font and every image of the
button guide is drawn as the key or mouse button the keyboard defaults press it with (E, Shift, Space, left click, Q,
R, right click, F, Tab, M, 1 to 4, W A S D, Ctrl, C) and the right stick as the mouse, whatever the pad layout. The
setup writes romfs-patches-pc next to the Xbox folders (make_romfs_patches.py --prompts pc, button_icons.py pc_icons);
--binds <totk.ini> draws the keys of its bind_ lines instead. At a game resolution of another shape the game takes
romfs-patches-pc-<w>x<h> (--prompts pc --aspect) in place of romfs-patches-<w>x<h> when it is there.

(cherry picked from commit 3f81cf02be664100bd9c569c53588d620d90b527)
2026-11-04 08:36:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 56b3cd1246 Drop the keyboard prompts of #483 in favour of #585
#483 draws the stick glyphs on the wrong code points: U+E056 and U+E057 (the stick presses) get WASD and the mouse,
U+E05E and U+E05F (the sticks) get Ctrl and C, and both left-stick HUD images show Ctrl. #585 maps them by the game's
font and keeps each glyph's advance.

This reverts commit cd35ffa.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:35 +03:00
0xEmz cd35ffaf36 Show keyboard and mouse icons in the prompts when prompts = keyboard
Add keyboard and mouse button icons to tools/button_icons.py and
tools/make_romfs_patches.py --prompts keyboard, with a third 'Keyboard
and mouse' choice under Controls > Button prompts (prompts = keyboard).

Keycaps cut their labels out of the game's own text fonts, mouse clicks
and right-stick camera look draw clean mouse silhouettes, and
make_romfs_patches.py --ini reads any bind_ overrides from totk.ini.
2026-11-04 08:11:06 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ff49f6b62f Keep the gamepad unchanged under the direct mouse and the menu pointer, and fix the mouse activity flags
The camera input's activity hook wrote the flags to +0x418, but the game's next instruction stores w8 over them
(1.4.3 main+0x874d80), so a mouse-only turn still read as idle. The hook now changes w8.

The free-orbit hooks rewrote the camera stick input from the last sample even in steps without mouse motion; they now
take a step only when the mouse moved in it or holds the pitch, so a gamepad-only step reaches the camera as the game
made it.

The mouse shake gesture for detaching parts is gone: three 24-count reversals fire while a held object is turned back
and forth. Arrow keys or the pad's right stick shake as before.

The menu pointer comes only while the keyboard and mouse are the device used last (input_kbm_last): a gamepad player
sees the menus as on the console. Raw mouse travel is counted while the cursor is released too, so moving the mouse
brings the pointer back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:10:59 +03:00
walterwhite69420 050563687b Add experimental direct mouse camera input for game 1.4.3 2026-11-04 07:55:49 +03:00
ethanblazkowiczandDeepSeek V4.1 Flash 1017 315064b3ec Make the setup window DPI aware so Windows does not stretch it
The window ran in a DPI-unaware process, so Windows drew it at 96 DPI and stretched the result on a display at 125% or
more, which is why it was blurry at 200%. The process is now system DPI aware before Tk starts (installer/dpi.py: Tk 9
has no per-monitor support, so system awareness is what it can honour); Tk then sizes the fonts with the display's DPI
and dpi.px sizes the paddings, the wrap widths and the progress bar with it. The launcher makes its own process aware
the same way for its error box. tests/installer_gui_test.py checks that a fresh process ends up aware and that Tk's
scaling follows the display.

Co-Authored-By: DeepSeek V4.1 Flash 1017 (DeepSeek Harness) <noreply@deepseek.com>
2026-11-03 22:25:35 +08:00
Valiantsin DzerakhandClaude Opus 5.5 e8b8860abe Warn on a cut DLSS download and stay quiet without an RTX GPU
A connection cut mid-file raises http.client.IncompleteRead, which is not an OSError, so it failed the whole setup at
the DLSS step instead of warning. The download box is ticked by default, so every player without an RTX GPU got a
warning for a download they never chose; that case is a log line now. The game file dialog keeps its "All files"
filter: the check tells an NSZ or XCZ by its content, not its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 15:37:11 +03:00
itaskaev2andClaude Opus 5.5 444e6f5b51 Download NVIDIA DLSS in the setup for RTX GPUs
dlaa and the DLSS modes need nvngx_dlss.dll next to totk.exe, which the release does not ship, so most players
never had DLSS. A new setup step after prepare downloads NVIDIA's own copy from the DLSS SDK repository
(github.com/NVIDIA/DLSS, tag v310.9.1, NVIDIA RTX SDK license) and checks its size and SHA-256.

The window has a tick box for it, on by default and named with its source and licence; the CLI takes --dlss. The
step runs on Windows with an NVIDIA RTX GPU (the host check's Vulkan devices), keeps a DLSS library the player
already put there, and on a failed download warns and lets the game run without DLSS; the next setup run tries
again. Texts in English, Russian, Brazilian Portuguese and Simplified Chinese, docs/installer.md step 7, tests in
tests/installer_test.py (DlssTest, with a file: URL).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 15:36:07 +03:00
Valiantsin Dzerakh c8ec6c2fe2 Merge branch 'pr/527' into task/prwave8 2026-11-03 15:35:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 14ed048dd3 Read an install recorded as update 1.1.1 as 1.1.0 when the setup updates it
Releases before 0.3.1 recorded the 0x20000 update as 1.1.1. After the rename (#371) nothing mapped the recorded
name, so an update of such an install asked make_romfs_patches.py for --version v111 and failed at the end (#332);
in a fresh setup folder it would not find expected-v1.1.1.json at all. migrate_state maps the old name before the
plan and gives the extract record the key of the renamed expected file; the full check of kept output still hashes
the extraction against it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 22:17:31 +03:00
itaskaev2andClaude Opus 5.5 afe3404434 Accept NSZ and XCZ game files in the setup
The check step tells a compressed file by its content (an NSP or XCI holding NCZ files), whatever its name, and
unpacks it into the temp folder with tools/ncz.py before the extraction reads it. Every NCA comes back byte for byte
and is checked against the hash in its name. The file dialog has one filter for all game files, and the form says
that compressed files are unpacked automatically, in every setup language.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:03:27 +01:00
Valiantsin DzerakhandClaude Opus 5.5 e0e1ecfdbb Merge pull request #384: Fix installer catalog test encoding on Windows (FaserDocs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 08:31:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8eb48493c0 Rebuild the code cheats and ExeFS patches of a renamed mod folder
The lift key hashed each cheat and ExeFS patch file by its name and content only, but tools/cheats.py and
tools/exefs_patches.py name every patch set after "<mod folder>/<cheat or file>". After a mod folder was renamed,
totk.exe saw none of its code cheats in the build and started the rebuild, the setup found the lift current and skipped
it, and the cheats stayed "after the rebuild" for good. The key now takes each file's path under mods/ as well.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 19:28:32 +03:00
FaserDocs 86a9ea6d53 Read installer sources once as UTF-8 in the catalog test 2026-11-01 15:54:57 +01:00
Valiantsin DzerakhandClaude Opus 5.5 3668271182 Start the rebuild window and its setup run with a Python that finds the installer
The rebuild command puts the release folder on sys.path itself: totk.exe starts it in the install folder, and only the
Windows release Python's ._pth names that folder. In a repository the window and its setup run use the Python that
runs the setup, since the tools' embeddable Python there has neither tkinter nor the repository on its path.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 17:40:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c3dae879cb Build the mods' ExeFS patches into the game and switch them with their mod
A mod that patched the game code (.ips, .pchtxt) stayed off as a whole.
tools/exefs_patches.py now reads IPS, IPS32 and IPSwitch files from each
mod's exefs folder and from atmosphere/exefs_patches/<name>/. It keeps the
ones whose build id is main's and turns their writes into main's code into
one patch set per file. The writes go through the same rules as the code
cheats (tools/cheats.py convert). A file that writes main's data, or that the
rules cannot express, is unsupported as a whole. The setup's lift runs it
after cheats.py and writes build-cache/exefs.status.

runtime/mods.c checks each patch file against that status:

- a built file's set is switched on with its mod;
- a file the build lacks keeps the mod off and starts the rebuild at the next
  start, like a code cheat does;
- an unsupported file keeps the mod off, and the Mods tab shows the reason;
- a file for another version is counted and left out.

A mod patch on a site of one of the port's own sets turns that set off while
the mod is on, and the Mods tab names it. The Mods tab also gets the "Rebuild
the game now" row.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 14:29:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1bebcfd9ef Rebuild the game at start when an enabled mod has unbuilt code cheats
Code cheats need the game lifted and compiled with them. Running the setup
again did that, but it lifted and compiled everything and prepared the
shaders again.

- The setup keeps the generated C and the objects in its temp folder (about
  1.3 GB). gen.py rewrites only the chunks whose C changed, so Ninja
  recompiles only those. One new code cheat on 1.4.3 took a 47 s lift and
  19 s of compile and link on 24 cores.
- Prepare's key no longer follows the compile key, only the runtime, the
  translator and the game version, so a rebuild keeps the prepared shaders.
- The cleanup writes build-cache/rebuild.txt, the command that opens the
  setup window in a new --rebuild mode on the install folder. That mode runs
  at once and starts the game again when it succeeds.
- At start, runtime/cheats.c runs that command and exits when an enabled
  mod has code cheats the build lacks (plat_spawn, new for Windows and
  Linux). build-cache/rebuild.skip keeps a failed or cancelled rebuild from
  starting again for the same cheats. "Rebuild the game now" on the Cheats
  tab tries again, and [mods] mods_rebuild = off turns the rebuild off.
  Scripted runs never start it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 14:16:53 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3dd7f846b8 Merge the resource size table of the enabled mods at start
The game sizes the buffer for a file from its entry in
System/Resource/ResourceSizeTable.*.rsizetable.zs, so a mod file that grew
could fail to load, and a file a mod added had no entry. With a player mod
enabled, romfs.c restbl_overlay now rebuilds the table at start from:

- the game's table;
- every table of this version that a mod (or the Xbox prompts folder) ships,
  where the larger entry wins;
- a mod's table for another version, for that mod's own files only;
- each served mod file: a grown file's entry rises by the growth times its
  type's factor, and an added file gets an estimate.

The factors come from the 1.4.3 table measured against its own files (most
types need the size plus at most 8 KiB; bfres 1.5x, bkres 2x, bgyml 3.85x).
The result is served from <profile>/mods/ and takes about 90 ms. A mod's
table no longer counts as a clash with the Xbox prompts. Game entries are
never lowered.

tests/mods_romfs_check.py checks the merged table and now passes probe-fs a
profile of its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 14:05:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ac69f39529 Read cheat files from the mods folder instead of shipping them
A cheat file is now part of a mod: mods/<mod>/cheats/<build id>.txt, or the
Atmosphere places inside the mod folder, the file name in any case. The port
ships no cheat files any more (the MyNXCheats files and their notice row are
gone).

- tools/cheats.py --mods builds the code cheats of every mod folder; a
  cheat's key hashes "<mod folder>/<name>", so two mods' cheats of one name
  keep their own switches.
- The setup reads the cheats from <install>/mods and writes the status to
  build-cache/cheats.status.
- runtime/cheats.c reads the files of the enabled mods the port can use, in
  the Mods tab order, and the status from build-cache.
- A mod with only cheats is usable. The Cheats tab groups the cheats by mod,
  and the Mods tab says how many cheats a mod brought.
- The cheat texts are in all four menu languages.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 14:05:31 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5e584ea966 Merge pull request #51: Load Atmosphere cheat files and switch their cheats from a Cheats tab in the menu (conongnang)
Merged onto the mods folder (task/mods1); the Cheats tab sits after Mods. The cheats' menu text and the cheat file's
place are reworked for the mods folder in the commits that follow.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 13:31:17 +03:00
Valiantsin DzerakhandClaude Opus 5.5 59c8d20fe3 Serve the mods folder as RomFS overlays: the higher mod wins a file, unusable mods are skipped
Player mod files are checked by identity, not hashed, and a path several overlays give is served by one: a higher mod
beats a lower one, any player mod beats the romfs_mods manifest and the port's own patches. A mod path that differs from
a RomFS path only in case is served under the RomFS spelling. Files named for another game version (.Product.<n>.,
missing from this RomFS) are counted and left out. A player mod that replaces a file of the Xbox prompts folder sends
the game back to the Switch prompts, as a romfs_mods manifest already did.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 13:14:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c0007bd16d Merge pull request #191: Add Simplified Chinese to the setup window and the in-game menu (tuwary)
The menu side is dev's: it has Simplified Chinese since #243, glyphs included. Simplified Chinese
joins the setup window as a fourth language beside Brazilian Portuguese, in the language switch,
the Windows and locale pick and the launcher; zh-Hans.json gets the nineteen texts added since
(fonts step, CPU level, base game checks, Linux checks) and the {game_exe} placeholder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:29:30 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4cece2c848 Merge pull request #346: Let the installer extract the Switch shared fonts from a firmware folder (fch869)
Conflicts with dev resolved by keeping both sides: the fonts step sits between check and extract,
beside the x86-64-v2 check, the pt-BR window language and the xbox-label patches. pt-BR gets the
thirteen firmware and fonts texts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:03:29 +03:00
Valiantsin Dzerakh 4524fed813 Merge pull request #211: Show Xbox button icons in the prompts, with a Button prompts setting that follows the pad layout (waxyfeet)
# Conflicts:
#	docs/installer.md
#	runtime/cfg.c
#	runtime/ui/menu.cpp
#	runtime/ui_text.h
2026-11-01 11:14:40 +03:00
Valiantsin Dzerakh 57129898e8 Merge pull request #296: Run the game on x86-64-v2 CPUs without AVX2 (chen3feng)
# Conflicts:
#	README.md
2026-11-01 11:10:05 +03:00
Valiantsin Dzerakh fb99b2bab1 Merge pull request #186: Add a Brazilian Portuguese catalog for the installer window and the launcher (Lucas-blip-png) 2026-11-01 10:55:12 +03:00
turquopool 873ebb7755 Let the installer extract the Switch shared fonts from a firmware folder
The setup takes an optional --firmware directory (an unpacked firmware or an emulator's Contents/registered) and, for Chinese, Korean and Traditional Chinese, runs the vendored font extractor into <install>/shared-fonts. Without the folder it warns as before and the install still completes. The fonts step is keyed by the language and a cheap firmware fingerprint; the window gets a folder picker and help text, and the command line takes --firmware.
2026-11-01 15:22:14 +08:00
conongnangandClaude Opus 5.5 183519190a Bundle the cheat files for 1.2.1 and 1.4.3 and install them when the player has none
The setup keeps a player's own file. A bundled file the tools refuse costs its cheats, not the install.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 08:42:10 +07:00
conongnangandClaude Opus 5.5 a81b00930e Key the lift step on the files in cheats, so extracting main does not rebuild the game
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 08:15:20 +07:00
CHEN Feng 34b4faee7c Run the game on x86-64-v2 CPUs without AVX2
-march=x86-64-v3 kept the port and the installer to CPUs with AVX2 and FMA. --cpu v2 compiles the generated code and the runtime for SSE4.2 instead. Without FMA3 the FP lowering calls fma/fmaf, so runtime/fma.c provides correctly rounded ones (musl, MIT) that honour MXCSR's rounding mode, FTZ and DAZ; the UCRT's software fallback rounds incorrectly by up to half an ulp. simd.h's fast paths keep their assumptions.

The installer's host check asks for x86-64-v2 and selects libtotkrt.a or libtotkrt-v2.a; both release scripts build and ship the pair. The differential tests compile fma.c as well, so a --cflags=-march=x86-64-v2 run tests it.

Tested on an i7-3770K (no AVX2, FMA or BMI) with an RTX 3060 Ti, game 1.4.3: the installer ran end to end, --selftest passed and play holds 40-60 fps at 1080p. fma and fmaf matched 152,288 exact vectors over two seeds, including ties, subnormals and every rounding mode, FTZ and DAZ combination. The v3 build is unchanged: fma.c is an empty translation unit there.
2026-11-01 07:09:13 +08:00
Valiantsin DzerakhandClaude Opus 5.5 375acc3a71 Say that a base game file is an update or a combined package instead of claiming it is not Tears of the Kingdom
An update NSP chosen as the base game keeps the base title id on its Program NCA and carries the update id (0100F2C0115B6800) only in its Meta NCA, so program_nca rejected it with the generic base-game metadata message (#261). Check.open_input now names an update file or a file with several Meta NCAs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 02:04:47 +03:00
Deon FoucheandClaude Opus 5.5 19fb3a75c9 Find the resource size table by any ResourceSizeTable.*.rsizetable.zs name, as MacNativeGames does
The prompts then do not fail on a table named without Nin_NX_NVN; the test RomFS of 1.4.3 uses that form.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 20:50:17 +10:00
Deon FoucheandClaude Opus 5.5 f7d563db05 Draw Xbox button icons into the prompts overlay with make_romfs_patches.py --prompts
tools/button_icons.py, adapted from MacNativeGames' make_button_icons.py, draws LB, RB, LT, RT, Menu, View and a d-pad
cross into the button font of every font archive and into the button guide's L and ZL images, with the letters cut out
in the game's own text fonts, and raises the resource size table for the archives that grow. --prompts xbox swaps the
face buttons as --xbox-prompts did (now its older name); --prompts xbox-label keeps their letters for the xbox and auto
pad layouts. The plain overlay is unchanged. tests/romfs_prompts_test.py runs both on a RomFS it builds itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 20:50:17 +10:00
tuwaryandClaude Opus 5.5 859ed28735 Add Simplified Chinese to the setup window and the in-game menu
The setup window gets installer/text/zh-Hans.json, a full copy of the English catalog, and a third entry in its
language switch. A Windows display language of zh-CN or zh-SG picks it; zh-TW, zh-HK and zh-MO write Traditional
Chinese and stay on English. A Chinese window still starts with English as the game language, because Chinese game
text needs the Switch shared fonts the installer does not extract. The launcher's message box and
make_release.py's launcher_text.h carry the Chinese strings too.

The menu and the performance overlay get a text_zh_hans table for every menu id, and TOTK_MENU_LANG takes zh-Hans.
Left unset, the menu follows the system UI language with the same Simplified Chinese regions. The font atlas merges
in every glyph of the menu language's text from the system font (Microsoft YaHei, else SimSun) and is built again
when the menu language changes. ov_probe checks that every menu id has Chinese text, that the printf formats keep
the English conversions, and how system language tags map to menu languages; installer_gui_test checks the new
catalog the same way as the Russian one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DcYzeu7eb2tXZMU4bRVcGh
2026-10-31 16:33:53 +08:00
Lucas-blip-png 1e32d605ce Add a Brazilian Portuguese catalog for the installer window and the launcher
The installer had English and Russian. installer/text/pt-BR.json covers every id with the same placeholders; the window offers PT-BR beside EN and RU and picks it when the Windows display language is Portuguese (Brazil), LANGID 0x0416; Portugal's Portuguese stays English. make_release.py writes LAUNCHER_*_PT_BR into launcher_text.h and the launcher shows it on the same LANGID. The catalog tests check every window language against English.
2026-10-31 04:01:30 -04:00
Pasha Kagan 3c749df3f4 Test tools/pack_shader_cache.py on a fake shader cache 2026-10-31 07:23:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a76224f8a6 Fail the install when romfs/ is gone or unreadable after cleanup
An install whose romfs/ went empty and unreadable after the extraction had verified it (a folder Windows was still
deleting) ended with result ok, and the game stopped at its first file read. Cleanup now checks that romfs.bin and
index.json are still there, match the verified size and hash record, and that romfs.bin opens; otherwise it fails with
cleanup.romfs_unreadable, which tells the player to restart Windows and run the installer on the same folder (resume
extracts the game data again). Reported in #107.

tests/installer_test.py CleanupTest: an emptied, removed or resized romfs passed cleanup before, fails now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:42:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 67116a387f Map the zh-CN and zh-TW game languages to zh-Hans and zh-Hant
Choosing Simplified Chinese in the installer wrote lang = zh-CN to totk.ini and the game showed Japanese: ov_language() handed the code to nn::oe::GetDesiredLanguage unchanged, and TotK only accepts zh-Hans and zh-Hant for Chinese. Reported in #72 and #68.

ov_language() now maps both old spellings, so existing totk.ini files keep working and cfg.c still accepts them. The F1 menu offers one row per language under the canonical codes. The installer lists only zh-Hans and zh-Hant, writes them, and reads zh-CN or zh-TW from the CLI or from a recorded totk-install.json as the canonical code, so a repair or update of an old install does not fail with check.lang_unknown and rewrites the ini. --probe-services prints the configured language and checks the four Chinese codes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:27:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 758b46460f Keep the regression routes and the input scripts made for the maintainer's own saves out of the repository: regress.py, its scoring and test, and the fight, island and backrun scripts work only with those saves; load_save.txt stays as run_game.py's default
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:12:53 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c2943970cc Merge the spin wait gates: they also end the fight hangs
The generator emits a guest poll such as `ldr w9, [x19]; cmp w9, #1; b.eq` as a plain C load, and clang hoists it out
of the loop: the lock wait in f_7001fa0e2c compiled to `cmp; jne; jmp .`, so a thread that found the lock held spun
forever after its holder released it. A fight run hung this way in 3 of 13 launches on an RX 9070, with the UBO
snapshot on and off; gdb showed the thread on that `jmp` in every sample. The gate is an opaque call on every
back-edge of the 868 loops tools/spin_waits.py lists, so each pass reloads memory: the exe goes from 182 self-jumps to
148, and 144 of those are the game's own `b .` instructions. 8 of 8 fight runs then passed; tests/diff/func.py with
--patches passed 5470 cases on 878 functions, and the four probes passed on 1.4.3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:05:44 +03:00
Valiantsin DzerakhandClaude Opus 5.5 2fe6a6d4c1 Keep MXCSR in line with FPCR where FPCR changes instead of checking it in every FP op
The FP helpers compared c->fpcr with a cached copy before every operation to resync MXCSR lazily. MXCSR now
follows FPCR.FZ at once: MSR FPCR calls rt_fpcr_sync, and so do rt_call (thread, fiber and host entry into guest
code), fiber resume (FIBER_FLAG_FLOAT_SWITCH fibers keep their own MXCSR) and the differential test harness per
case. op and vop only test FPCR.RMode for the slow path, and their redo check is one ordered-not-equal compare of
|r| with the smallest normal, the same NaN-or-smallest-normal set as before.

Hot guest code shrinks by about a quarter (132 functions holding half the guest cycles, 1.4.3); fight frame time
moves 1-3%, inside the run-to-run spread. lift, simd, func, atomic and flags_check pass on 1.4.3; simd.py fails
without the harness sync.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:25:25 +03:00
Valiantsin DzerakhandClaude Opus 5.5 27056b212a Keep NZCV in a local of each generated function instead of c->nzcv
Every flag-setting instruction packed N, Z, C and V into c->nzcv and every reader unpacked them. recomp/flags.py
now runs a reaching-definitions pass per function: a compare stores its operands in a local Flags F, and a reader
whose definitions are all of one kind computes its condition from them, so cmp and b.cond become one host compare.
CCMP, FCMP, MSR NZCV and ADCS write the packed form, which readers reached by several kinds also use. Calls and
returns publish nothing (AAPCS64 neither passes nor preserves NZCV); tail branches, falls into the next function and
br through rt_dispatch publish c->nzcv, since discovery can start a function inside another one. Functions with an
unresolved computed br keep flags in c->nzcv.

1.4.3 main: 492k direct and 89k packed flag reads, .text 342 -> 299 MiB. Fight bench (bench-fight2-2026-10-27b,
frames 5400-7500, uncapped) 13.15 and 13.63 ms vs 13.9 before. tests/flags_check.py checks the new helpers against
the packed ones; tests/diff/func.py no longer compares NZCV, which generated code leaves untouched.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:07:58 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e9216b8b49 Test functions with calls in tests/diff/func.py: every BL and BLR goes to one stub on both sides, which folds the registers at the call into a digest kept in the scratch buffer and sets X0-X18, NZCV and V0-V7 from it, so a register missing from the Cpu at a call or held across one fails the case
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 17:12:34 +03:00