Commit Graph
202 Commits
Author SHA1 Message Date
Valiantsin DzerakhandClaude Opus 5.5 61d0075039 Give game 1.2.1 the direct mouse camera of 1.4.3 (issue #751)
The 72 mouse_direct sites of patches-v143.txt mapped to the 1.2.1 main by enclosing function, each original word
checked: the camera input update, free orbit, Ultrahand and the 16 player camera modes. 1.2.1 keeps some values in
other registers and stack slots (camera input x in s11, orbit angles at sp+0x3c/0x40, Ultrahand x in s9), so the
hooks read a per-version MouseLayout; the 1.4.3 values and behaviour are unchanged.

Where 1.2.1 adds a turn in a shared helper, the degrees go to the store of the helper's result (Aiming's pitch
target, new ROLE_BASE_STORE) or to the turn it is given (Horse yaw). Wakeboard, ShieldSurfing and Tail read the stick
twice (REPEAT on the first read), the dialogue cameras' angle loads are pre-indexed (mov -> add, as ClimbObj).
The player state (ability, bow in hand) is not known on 1.2.1 and reads as not found.

tests/mouse_direct_check.py runs the hooks with both layouts and checks each load-site table against its patch file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 18:47:26 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b77962bae5 Keep the 0.3.10 mouse rate in the direct camera: 0.08 degrees a count in every camera and Ultrahand at its old rate (PR #753 follow-up)
PR #753 unified the cameras at 70/1500 = 0.0467 degrees a count and doubled Ultrahand's rate, which made every
existing mouse_sens turn the free camera 42% slower. The free camera keeps 0.08 degrees a count at mouse_sens 1, every
camera #753 unifies takes the same 0.08, and the held object keeps 0.01 stick units a count over the frame ratio (with
#753's cap of three full tilts a step). A mouse shake now needs 125 counts a swing at sensitivity 1 (10 degrees).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 17:49:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 184221f032 Merge PR #753 from Tempus3214: the direct mouse turns every player camera at one rate, the pitch no longer springs back after an aim, and a mouse shake detaches a fused part from what Ultrahand holds (fixes #734, #717)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 17:32:19 +03:00
Tempus3214andClaude Opus 5.5 21c65ec065 Zoom the map with the scroll wheel
On the map the mouse moves the cursor, so it had no way to zoom: the zoom is the right stick's y, which only the
keys and a pad reached. While the map is open, each wheel notch is now a full-tilt push of that stick for 100 ms with
50 ms of neutral after it (a turn away from the player zooms in). A fast scroll's notches wait their turn, at most four,
and a turn the other way drops them. The wheel stays unbound elsewhere.

The back ends count the notches while the cursor is captured (input_win.c from raw input's usButtonData, input_sdl.c
from SDL_EVENT_MOUSE_WHEEL), keeping a high-resolution wheel's part of a notch (ikb_wheel_take).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 03:48:13 -03:00
Tempus3214andClaude Opus 5.5 a1cd122625 Give the mouse the same degrees per count in every player camera, and fix the soothe button and the mouse shake
Only the free camera took the mouse as degrees. The other camera modes took it as stick input, which their own speeds,
frame time, slow motion and curves reshaped, with the on-foot camera's square-root pitch shaping on top: bow aiming was
far too sensitive vertically on slow movements, abilities and the Purah Pad camera eased their pitch, lock-on turned
27% slower, and climbing, shield surfing and the rest each turned at their own rate.

Each camera mode's update now loads the gamepad's part of the stick where it computes its turn and adds the mouse's
degrees where it adds that turn to its angle (runtime/mouse_direct.c camera_load, the load sites of
recomp/patches-v143.txt): aiming, scope, abilities (and Recall's cursor), horse, Purah Pad camera, lock-on, bow
lock-on, wall and object climbing, the waterfall's turn, shield surfing, wakeboard and the dialogue cameras. Recall's
cursor moves so that its aim turns as many degrees a count. The waterfall's height and the horse's empty lock-on are
not angles and stay stick input, now linear. A step whose mouse motion no hook took is logged with the camera's name.

Holding L to soothe the horse gave the mouse to the ability wheel's virtual cursor, a held stick for the camera: the
mouse goes to the wheel and the D-pad strips only while their screen has the focus (menu_cursor.c
menu_cursor_shortcut). A mouse shake no longer plays a 0.8 s swing after it: the right stick follows the mouse's own
swings and lets go when it rests, and the camera does not turn by that swing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 03:36:51 -03:00
Wintego 11d404930d Default the game resolution to the display's shape 2026-11-05 08:31:30 +03:00
Tempus3214andClaude Opus 5.5 55083b69b3 Give the direct mouse one turn rate in every camera and stop the pitch springing back after an aim
The free-orbit camera turned 0.08 degrees per count while the other cameras (the bow, the abilities) took the mouse as
0.01 stick units a count, about 0.023 degrees for yaw and through the camera's signed-square pitch for y, so the bow
turned at half the speed and small vertical moves barely moved it. Every camera now turns 70/1500 = 0.0467 degrees
per count: the stick path gets 0.02 a count for x and the signed square root for y, so pitch is linear and as fast as
yaw. While the player uses an ability (the action verb UseSpecialPower, read from the player actor with the 1.4.3
placement), the ability camera's own linear scales are undone instead. stick_sens is divided out, Ultrahand's held
object gets the camera's stick value a count (at most three full tilts a step), and mouse_aim_scale (0.1 to 3)
scales the mouse while the bow is drawn.

The game's lock-on, recenter and aiming override released the mouse's pitch hold and restored the target from before
it, so after a shot the camera sprang back to that pitch, or to the game's default target. The mouse now lets go
without restoring, and when the override ends (or the camera went 100 ms without a step) it holds the pitch the
camera has then. A gamepad's vertical input still hands the pitch back to the game.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:47:45 -03:00
Tempus3214andClaude Opus 5.5 366150cba4 Keep the menu pointer through a tab switch and move the map's cursor with the mouse on 1.4.3
A tab switch or a popup opening drops the game's focus box for a frame or two. The menu pointer read that as the menu
closing: the mouse camera captured the cursor again and, when the next tab took the focus, the pointer came back in the
middle of the window. A focus gap of up to 300 ms now keeps the pointer where it is.

The map has no focus box, so it stayed gameplay and the mouse drove the right stick, which zooms the map. The open
screens in eui::ScreenMgr's list now find the map (the Purah Pad's frame with AppMap_00 and the menu background; the
Scope opens AppMap_00 without the background), and there the mouse is the left stick, which moves the map's cursor.
The list is read every 100 ms, as each screen costs memory queries.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:43:41 -03:00
Valiantsin Dzerakh 74058ac053 Merge branch 'dev' into task/grassfire 2026-11-04 16:49:47 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1a9d089a3d Write grass maps back at fence waits so fire spreads through grass, and batch the copies
TotK's fire spread reads its 260x260 RG8 grass maps after a fence wait with no invalidate. The fence write-back took targets up to 64 KiB only, so the CPU saw stale maps and fire died where it hit (#132).

A target over wb_fence_limit now goes back unless the GPU drew it in each of the last 16 frames. Raising the limit instead pulled in four 256x256 targets drawn every frame, about 2.7 ms a frame.

Every level and layer of every texture in a write-back now shares one upload batch and one wait. A burst of 9 grass maps took 7.8 ms with one round trip per level and takes 2 to 2.5 ms. The fence write-back on the field replay fell from about 45 to 22 ms per second of play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:49:46 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7be68ec5e1 Turn replay_async off by default again
83d2302 turned it on from one measurement where the game waits for the GPU (a GTX 1650 in the Depths, #88).
Nobody checked frame pacing at the 60 fps cap with GPU headroom or on a 6-thread CPU. #659 (GTX 1660 Ti,
i5-9400F, GPU at 26 %) reports uneven motion on 0.3.7 at a steady 60 fps that 0.3.4 did not have, and this
is the only change in the frame path between the two releases that reaches that machine. Players it helped
set replay_async = 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:50:38 +03:00
Wintego cb628b08b7 Add keyboard and mouse button prompts (prompts = pc)
The Button prompts row gets a third choice, PC: every button glyph of the game's button font and every image of the
button guide is drawn as the key or mouse button the keyboard defaults press it with (E, Shift, Space, left click, Q,
R, right click, F, Tab, M, 1 to 4, W A S D, Ctrl, C) and the right stick as the mouse, whatever the pad layout. The
setup writes romfs-patches-pc next to the Xbox folders (make_romfs_patches.py --prompts pc, button_icons.py pc_icons);
--binds <totk.ini> draws the keys of its bind_ lines instead. At a game resolution of another shape the game takes
romfs-patches-pc-<w>x<h> (--prompts pc --aspect) in place of romfs-patches-<w>x<h> when it is there.

(cherry picked from commit 3f81cf02be664100bd9c569c53588d620d90b527)
2026-11-04 08:36:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 56b3cd1246 Drop the keyboard prompts of #483 in favour of #585
#483 draws the stick glyphs on the wrong code points: U+E056 and U+E057 (the stick presses) get WASD and the mouse,
U+E05E and U+E05F (the sticks) get Ctrl and C, and both left-stick HUD images show Ctrl. #585 maps them by the game's
font and keeps each glyph's advance.

This reverts commit cd35ffa.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3676e299c5 Add a shake key that detaches a fused part held with Ultrahand
G (bind_SHAKE, keys only) swings the right stick left and right for 0.8 s, longer while held, so a part comes off
without shaking the arrow keys by hand. The pad keeps shaking its own stick. Remappable in the Controls tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:12 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d0579731c5 Make the direct mouse camera the default and add a Controls row for the menu pointer
mouse_mode now defaults to direct: on 1.4.3 the camera turns by the raw mouse motion; 1.1.0 and 1.2.1 have no hooks
and keep stick emulation, and no setting changes the gamepad. The Controls tab gets a "Mouse in the game's menus" row
for menu_cursor, and the mouse rows are in all four catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:18:29 +03:00
0xEmz cd35ffaf36 Show keyboard and mouse icons in the prompts when prompts = keyboard
Add keyboard and mouse button icons to tools/button_icons.py and
tools/make_romfs_patches.py --prompts keyboard, with a third 'Keyboard
and mouse' choice under Controls > Button prompts (prompts = keyboard).

Keycaps cut their labels out of the game's own text fonts, mouse clicks
and right-stick camera look draw clean mouse silhouettes, and
make_romfs_patches.py --ini reads any bind_ overrides from totk.ini.
2026-11-04 08:11:06 +03:00
local 8ff29be86f Use the mouse in the game's menus on 1.4.3
While one of the game's menus has its focus box (the title, the save list, the inventory, Options, shops,
dialogue choices), the cursor is released from the mouse camera and shown; the item under the pointer takes
the focus as the d-pad would, a left click is A on it and a right click is B. runtime/menu_cursor.c reads
eui's screens at each pad read and moves the focus with the writes eui::BoxCursorMgr::moveBoxCursor makes,
adapted from Weeping of the Empire's totk_menu_cursor.cpp (1.0.0, MIT), with eui::ScreenMgr's instance placed
in 1.4.3 at main+0x3acf960. menu_cursor = 0 turns it off.
2026-11-04 07:56:03 +03:00
walterwhite69420 050563687b Add experimental direct mouse camera input for game 1.4.3 2026-11-04 07:55:49 +03:00
ProSepandClaude Opus 5.5 8a8ef05241 Keep the shape of the pre-rendered movies on outputs that are not 16:9
The game stretches each decoded movie frame over the whole canvas, so the 16:9 movies were stretched on 32:9, 21:9 and
16:10 outputs. The host decoder now shrinks the picture inside the frame with a box filter and fills the rest with
black, so that the game's stretch gives the picture its own shape back. The new setting movie_aspect (TOTK_MOVIE_ASPECT,
keep or stretch, read when a movie starts) turns it off, and the menu has a row for it next to the picture shape.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 23:27:39 +01:00
ipavlin98 6ac2da7e8f Add a frame queue that frees a window image at its display time
nvnWindowAcquireTexture holds the game until the image is free, which was one period after its present's display time, when the next frame reaches the display. The present is a copy queued by then, so with frame_queue = 1 the image is free from that time: the game draws the next frame while the previous one waits for its turn, and a frame that takes up to one period more still makes its slot. In the town at 4K at 60 fps on an RTX 5070, frames over 17.5 ms fell from 25-33 to 1-8 per 30 s, for up to one frame more input delay. Off by default; the menu switches it at once.
2026-11-03 23:13:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1ec1e21d77 Use the project's own Discord application for Rich Presence
The default app id pointed at the application the feature was developed
against, owned by the pull request's author. The new one belongs to the
project, with the ring icon uploaded as the totk_512x512 art asset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:49:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1e378dd177 Keep stereo as the default speaker output
With audio_channels = auto as the default, a player whose Windows device reports six or more channels gets 5.1
without asking for it. USB headsets with virtual 7.1 and HDMI receivers or TVs set to 5.1 or 7.1 report that too,
though many of their owners listen in stereo. Stereo as the default keeps today's sound for everyone; 5.1 and auto
stay in the Sound tab and in totk.ini.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:35:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a732c16ce6 Merge pull request #438: 5.1 surround output (Specht2010)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:35:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 46a3b64895 Keep the console at start: until the game window opens it shows the shader prewarm
d2fbe0a freed the console as soon as the log file was open, but the game window only opens after the shader
prewarm. After an update the prewarm translates every shader again (about 5 minutes on a 24-thread CPU), and the
player saw neither a console nor a window all that time. The console release and show_console are taken back; the
window is still raised at start (#521).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:31:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 69e7bef868 Merge dev into task/discord
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:11:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 13e9ffec38 Merge pull request #455: Discord Rich Presence, off by default (avrahambenaram)
Conflicts in cfg.c (the key list) and main.c (the usage line) resolved by keeping dev's lines and adding the
Discord keys and --probe-discord.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:11:12 +03:00
Valiantsin Dzerakh 85123016c2 Merge task/smallfixes: game languages in the F1 menu (#580), versions and lows in the overlay (#587, #588), no console and a raised window at start (#208, #521)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-03 20:10:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d2fbe0a2b1 Close the game's own console and bring its window to the front (#208, #521)
A game started from a frontend (Playnite, RetroBat, ES-DE) or a shortcut got a console beside it, and its window
opened behind other windows, out of reach without a mouse. Once the log file is open, the console is freed when no
other process shares it; a terminal launch keeps its output, and show_console = 1 keeps the console. The window is
raised at start, with AttachThreadInput when Windows refuses the foreground. rt_fatal writes only to the log, and a
console owned by the game closed with it anyway, so no error text is lost.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:09:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5024daf40d Merge pull request #534: DLSS / DLAA on Linux, a DLSS model choice, the real frame time and a character-trail mask (SchulzCode)
Merged on top of #566 and #594, by hand in vk_dlaa.c:
- One dlss_preset key: default keeps #594's model per mode (K for DLAA, Quality and Balanced, M for Performance, L
  for Ultra Performance); k, j or any other letter a..m takes that model in every mode, live, recreating the features
  as #534 does. The menu texts say so, with pt-BR and zh-Hans added.
- The mask pass stays on #594's camera motion (the identity and the CPU-made reprojection in dlaa_mv.comp's two
  blocks) and adds #534's outputs; it runs before the per-object pass. Where the reactive mask test
  (TOTK_DLSS_REACTIVE) ran, DLSS gets that mask instead of the characters'.
- #566 dropped the scaler_skipped/scaler_missed report, so #534's reset of it goes too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:46:27 +03:00
Valiantsin DzerakhandClaude Opus 5.5 80349df1a6 Merge pull request #594: per-object motion vectors for DLSS, Ultra Performance, live DLSS modes and per-mode presets (DizzyMan1337)
Merged on top of #566. The camera motion is #594's: its blocks in camb also feed the per-object pass, and
dlaa_mv.comp stays as on main, fed the identity and the reprojection made on the CPU in double. #566's
vk_usnap_host goes, vk_usnap_bytes serves the same. #566's scaling-draw swap, camera rune guard and output-size
scaling pass stay in vk_dlaa.c. Translator patch 0012 becomes 0015 after dev's 0012-0014.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:27:04 +03:00
Valiantsin Dzerakh 18160ef379 Merge branch 'pr/442' into task/hdrhue 2026-11-03 16:18:40 +03:00
DizzyMan1337andClaude Opus 5.5 ad3ecd8f3c Per-object motion vectors for DLSS, camera motion in double precision, Ultra Performance and DLSS presets.
Solid scene draws whose position reads an object's own uniform blocks (bones c5, place c7, c6) are drawn a second time
with a vertex shader variant (translator patch 0012) that computes last frame's position from last frame's blocks; the
game writes those into two copies that take turns, and the uniform snapshot keeps both (vk_mvprev.c). The draws are
listed during the replay and recorded through the recorder thread with repeated state skipped. Blocks whose last-frame
copies measured wrong (c9 and c11 of walls and cliffs) keep this frame's; positions without an object block (terrain,
grass) keep the camera's motion, which measured as good.

The camera motion is reprojected in double precision on the CPU: the float inverse made noise on far surfaces and a
still camera that DLSS followed into a wobble. DLSS gets Ultra Performance (a third of the output, also in the F1 menu)
and NVIDIA's recommended preset per mode (K, M for Performance, L for Ultra Performance; TOTK_DLSS_PRESET overrides).

Test switches: TOTK_MV_CHECK measures the motion vectors and DLSS's output against the picture, TOTK_DLAA_TIMES times
DLSS and the motion passes on the GPU. A reactive mask pass for transparents is included but off (TOTK_DLSS_REACTIVE):
its mask covers sky and fog too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:31:58 +08:00
Valiantsin DzerakhandClaude Opus 5.5 fbc938f2a5 Merge task/astclowvram: ASTC to BC3 by default on GPUs with less than 5 GiB (#87)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 12:00:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1b48c8dc2c Encode decoded ASTC to BC3 by default on GPUs with less than 5 GiB of video memory
A GPU without ASTC gets the textures decoded to RGBA8, four times the memory of BC3, and on a 4 GiB card
that fills video memory: a GTX 1650 went from 10-23 to 3-12 ms of GPU time a frame with astc_bc = 1
(#87). BC3 loses some precision (normal maps), so it stays off where memory is not short. astc_bc unset
now turns it on when the largest device-local heap is under 5 GiB and logs the choice; 0 and 1 still
decide. The menu row becomes Auto / Off / On, and the description says what Auto does in all four
languages.

On an RX 9070 nothing changes. The Radeon iGPU on Windows reports its shared 10.5 GiB as device-local,
so it keeps RGBA8 as well. All probes pass, probe-astc and probe-cfg included.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 12:00:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 83d2302b6d Replay NVN submissions on their own thread by default
replay_async was off because no timing on our machines showed a gain. Where the game waits for the GPU
it does: a GTX 1650 in the Depths went from 450-686 frames over 50 ms a minute to 10-13, and the 1% low
from 10-12 to 13-24 fps (#88). An RTX 5090 ran slower with it off (#459). Where the replay or the game
threads bound the frame it is neutral (machines A and B, the Steam Deck in #308), and no crash report
ties to it. MacNativeGames has its translation thread on by default for TotK. It adds up to a frame of
latency; replay_async = 0 turns it off.

The fight scene on an RX 9070 with it on: 60.0 fps mean, 1% low 56.3 in the last window, no frame over
50 ms, 0 validation errors.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:48:16 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c1c89590be Merge task/prwave7: community pull requests #504, #539, #532, #584 and #564
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:13:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 422e3ba50b Turn graphics pipeline libraries back on for AMD's RDNA 1/2 driver
GPL was turned off on that driver branch because its device losses at boot (#5) came with a cold
pipeline cache. Their cause turned out to be GPU writes past 3D BC images, fixed hours later by the
3D BC stand-ins in vk_exec.c. With GPL off every new pipeline is built whole on the draw's path: an
RX 6600 log in #381 has frames of 0.5-1.2 s spent in pipeline builds.

On a Radeon iGPU (RDNA 2, driver 26.10.1, the RX 6600 users' driver) the 0.3.4 release with GPL on
booted from a cold cache and ran the fight scene: 921 fast links, none failed, no device loss, 0
validation errors. Pipeline waits in play dropped from 1381 ms (longest 225 ms) with GPL off to 481 ms
(longest 26 ms). TOTK_GPL=0 still turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:11:09 +03:00
Wintego 4e5637277e Lay the UI out for 3:2 game resolutions
The settings menu offers 1920x1280, 2160x1440, 2256x1504, 2880x1920 and 3000x2000 (the 3:2 screens of Surface and
Framework laptops and tablets), and the setup builds romfs-patches-<w>x<h> for each, so the HUD moves to the top and
bottom edges as it does at 16:10 instead of being stretched.
2026-11-03 09:16:51 +03:00
SchulzCode 1d49f64f34 Reduce DLSS trails behind moving characters with a bias mask
The motion vectors follow the camera only, so a character, animal or held item that moves on its own drags a faint
copy of itself through DLSS's history. TotK's G-buffer target 0 carries an object class in green: above 64/255 for
characters, creatures and held items (Link 253, others 125, held items 160), 0 for terrain and 32 for foliage, checked
in the field, in Goron City and on horseback. The motion-vector pass now also writes DLSS's bias mask
(DLSS.Input.Bias.Current.Color.Mask) where such an object is now or was the frame before, read through the motion
vector from the previous frame's class mask, so the history that holds the moving object is weighed down there.
dlss_char_mask (0, 35, 65 or 100 percent, default 65; F1 > Screen > "DLSS character trails", live) sets the strength.
A 640x360 pass of the G-buffer's shape, seen while loading, no longer replaces the scene's class buffer in a frame.
The status line also prints after 300 frames, with the frames that had the mask.
2026-11-02 19:21:56 +01:00
SchulzCode bd54e701a8 Choose the DLSS model and pass DLSS the real frame time
dlss_preset (default, k or j; F1 > Screen > "DLSS model", live) sets the render preset hints when a DLSS feature is
created. default leaves the choice to NGX (preset K for DLAA, Quality and Balanced in the 310 releases); j is the
transformer model NVIDIA describes as slightly less ghosting at the cost of more flicker. A change recreates the
features at the next DLAA run. FrameTimeDeltaInMsec now carries the time since the previous evaluation instead of a
fixed 16.67 ms. The menu and totk.ini.example name the DLSS model file of the platform in use.
2026-11-02 19:21:56 +01:00
Avraham ab32d00cc9 Merge remote-tracking branch 'origin/dev' into discord-rich-presence 2026-11-02 13:11:39 -03:00
Specht2010andClaude Opus 5.5 5d254e462c Merge dev into the 5.1 surround output
The device sink loop now writes every output channel; upstream's TOTK_AUDIO_DUMP gets the front pair before clipping.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 11:44:25 -04:00
Valiantsin DzerakhandClaude Opus 5.5 3ee347b248 Size the scene by a DLSS mode only where DLSS can run, and log whether fxaa = 0 found the game's FXAA
The DLSS modes already apply only with dlaa on (3de0839), so the DLL check no longer looks at dlaa, and off Windows,
where vk_dlaa.c is no-op stubs, a DLSS mode no longer shrinks the scene. fxaa = 0 names the FXAA shader it skipped,
or reports a minute of frames without it, so a translator change that moves FXAA_FS shows on any GPU.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:11:14 +03:00
itaskaev2andClaude Opus 5.5 438aa41747 Keep the scene at render_scale when DLSS cannot run
A DLSS mode (quality, balanced, performance) shrank the scene to 67, 58 or 50 % of the output and sharpened the
material textures' mip bias to match, even when nvngx_dlss.dll was missing and NGX reported DLSS as not available.
The game's plain scaling then stretched the smaller scene, and the negative bias made textures shimmer in motion.

With dlaa = 1 the scene size now waits on nvngx_dlss.dll next to totk.exe (checked before the device exists, as
the size is decided then) and follows render_scale without it. The mip bias applies only when NGX came up with
DLSS. dlaa = 0 keeps the documented size with the game's scaling, without the bias.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:04:07 +03:00
Valiantsin DzerakhandClaude Opus 5.5 55ba4d312d Say in totk.ini.example that variable refresh removes the frame limit's judder
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:03:56 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0b4b4f8036 Merge pull request #486: Warn in totk.ini.example that memory = import is much slower on a discrete GPU (ExpertKT)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:02:53 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c6fa3091a5 Merge pull request #485: Say in totk.ini.example that the frame limit should divide the monitor's refresh rate (ExpertKT)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:02:49 +03:00
ExpertKT 6f3d553a23 Warn in totk.ini.example that memory = import is much slower on a discrete GPU 2026-11-02 19:43:17 +08:00
ExpertKT aed3e83cc2 Say in totk.ini.example that the frame limit should divide the monitor's refresh rate 2026-11-02 19:41:07 +08:00
Valiantsin DzerakhandClaude Opus 5.5 710b7f5dd0 The device-lost report names the pass or dispatch the GPU was running
The replay marks the start and the end of every render pass and dispatch
(vk_exec.c vk_exec_pass_begin and vk_exec_pass_end, vk_exec_draw.c
op_dispatch and op_dispatch_ind), outside the pass so no pass is broken.
With VK_AMD_buffer_marker the GPU writes the last started and finished mark
into words 2 and 3 of the breadcrumb buffer; with
VK_NV_device_diagnostic_checkpoints the same points are checkpoints, read
with vkGetQueueCheckpointData2NV after the loss. A ring of 4096 records maps
a mark to its submission, index, target formats and size, draw count and the
input ids of the first and last draw's shaders. vk_device_fault_report logs
both marks with their records. The calls go through the recorder thread.

TOTK_PASS_CRUMBS (menu: GPU pass marks): unset, AMD buffer marks only; 1,
also NVIDIA checkpoints, whose extension is enabled only then; 0, none.
The design follows Savage Wind Recomp 3fae40c; the code is ours.

--probe-vkexec gets a pass marks part: pass, dispatch, pass in one
submission; the marks read back after the fence name the last pass and the
report text says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 09:50:30 +03:00