The build knows the player's update as v111: DISPLAY_VERSIONS maps it for the version line of the settings menu, and
boot.c carries its two checkpoint return addresses (0xeb8c14 for SetFocusHandlingMode, 0xebcdec for the first
nvnBootstrapLoader call) beside the 1.2.1 and 1.4.3 ones, with init_array counts of 10668, 45 and 116 for main, subsdk0
and sdk. The build guide lists v111 among the versions every step takes.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
ultrawide_layout.py handled canvases wider than 16:9 only, so the Steam Deck's 1280x800 got the 16:10 camera with
the 16:9 HUD stretched 11% over it. A narrower canvas now scales each layout's root pane in y by the aspect over 16/9,
stretches full-screen backgrounds back and moves the HUD to the top and bottom edges. The pane list and distances are
the TALL table of tools/aspect_layouts.py from pull request #60, in the format of the wide edits; the minimap,
discovery banner and dragon's tears keys are found by walking the animation's curves. Every value is checked against
the shipped one before it is written: 1.4.3's Common.Product.140 and 1.2.1's Common.Product.110 pass at 1280x800 and
1920x1200, and the 3440x1440 overlay is byte-identical to the one before.
The settings menu offers 1280x800, 1680x1050, 1920x1200 and 2560x1600, and the installer builds their overlays with the
21:9 and 32:9 ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch forked 79 commits before main and 98 before dev. Resolutions:
1. Aspect ratio: dev's implementation stays (camera patch at page +56 on 1.4.3, tools/ultrawide_layout.py layouts per
size in romfs-patches-<w>x<h>, the aspect = fit|stretch setting). The PR's second implementation is dropped: the
aspect sets of patches-v121.txt and patches-v143.txt (the 1.4.3 one patched the same viewport sites as dev's),
tools/aspect_layouts.py, the resolution.c shapes that limited game resolutions to 16:9, 16:10 and 21:9, and the
picture_fit setting. Its letterbox code (gfx_fit_rect) is kept and reads TOTK_ASPECT.
2. Code dev changed where the PR moved it: the stick dead zone, the test gamepad and the paddles go to input.c; the
DPI awareness, keep-awake and IME detach of gfx_window.c go to gfx_window_win.c; device fault reports and GPU
breadcrumbs to gfx_present.c. gfx_window_dpi gets an SDL version.
3. dev's Win32 calls in shared code go through platform.h: the shader cache pack reader (PlatFile), the romfs
overlay checks, the audio pacing waits, the motion, ASTC and device fault locks. plat_cpu_usable and
plat_commit_info get Linux versions; plat_cpu_count counts the machine's processors on both. dpi_probe.c becomes
dpi_probe_win.c.
4. assume_focus defaults to 1 as the PR has it (a load interrupted by a focus loss can stop for good) and stays live,
with dev's Game tab row.
5. The frame limits 40 and 45 join dev's list. The BC 3D storage fallback for Vega only runs with
TOTK_BLOCK_VIEWS_3D=1, since dev makes 3D BC images without block views by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game pauses whenever its window loses focus, as it does on the Switch when Home is pressed, and ASSUME_FOCUS was the
only way to change that: a known key with no row in the settings table. The runtime reads it at each focus change rather
than once at start, so the row takes effect the next time the window is left, and the build guide says what an unfocused
window now does.
A lift rewrites every generated chunk with the same contents, so a local sccache hits all of their objects and the
compile step costs seconds instead of minutes. build_game.py writes it into the ninja file ahead of cc when the
environment names one; the build guide describes the setting.
romfs-patches-xbox is optional: when make_romfs_patches.py --xbox-prompts fails (a game update whose prompts it does
not recognise), the setup removes the partial folder, warns (warn.xbox_prompts_failed) and finishes, where it stopped
the whole install before. The game then keeps the Switch prompts and the menu says the files are missing. Its log is
prepare-xbox-make_romfs_patches.log, so it no longer replaces the 60 fps run's log, and Prepare no longer counts the
folder as part of a finished step.
The Xbox button prompts section of docs/controls.md sat between the layout list and the controls table it introduces;
it now follows the table. The building.md note follows the paragraph it interrupted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With pad_layout = nintendo on an Xbox pad the right button does Switch A but is labelled B, the bottom one does B but is
labelled A, and the game's prompts still name the Switch buttons. A fourth Button layout choice, Xbox prompts (A right)
(pad_layout = xbox_prompts), maps the buttons as nintendo and swaps the prompts to the labels, so each prompt names the
button to press. Automatic, Nintendo and Xbox are unchanged and keep the game's own prompts. The buttons change at once;
the prompts at the next start, as the game reads its UI archive and fonts at boot (the menu says so).
At start, xbox_prompts loads romfs-patches-xbox in place of romfs-patches (runtime/romfs.c overlay_init).
tools/make_romfs_patches.py --xbox-prompts writes it from the player's own RomFS, with the 60 fps patches; nothing from
the game or a mod is added to the repository. It swaps A with B and X with Y in:
- the letter images Nt_KeyTexA/B/X/Y_00 of the action prompt (DoCommand_00), in the Common archive's __Combined.bntx
(same format, size and tiling, so the image data trades places);
- the action prompt's diamond of the other face buttons: one-letter text panes the game fills from
LayoutMsg/DoCommand_00.msbt in each language's Mals archive (both the messages and the layout's own text);
- the button glyphs U+E040 to U+E043 of scft/External.bfotf in each Font/Font*.bfarc, which every other prompt uses
(CFF outlines and metrics in the deobfuscated OpenType font, then its checksums).
The diamond's shape shows the button's position and stays. The setup writes both folders; the menu notes when the Xbox
prompt files are missing and when the prompts in use differ from the choice until a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game lays its interface out in a 1920x1080 space and draws it over the whole output, so at 1280x800 every menu and
the HUD were 11 % taller than drawn, and at 21:9 34 % wider. tools/aspect_layouts.py rewrites the layout archive for
each shape: every layout's root pane scaled back, full-screen backgrounds kept full, the HUD moved to the screen's
edges, and the minimap, place name and dragon's tears map icon animations adjusted. It follows the behaviour of
Fruithapje21's TOTK-Ultrawide (GPL-3.0, read for behaviour only) and checks every original value before it writes.
make_romfs_patches.py writes the results to romfs-patches/16x10 and 21x9 at install and build time, and romfs.c serves
the one of the output's shape. resolution.c accepts 16:9, 16:10 and 21:9; another shape draws 16:9 with bars. The
menu lists the game resolutions by shape. Checked on 1.2.1 and 1.4.3 at 1280x800 and 3440x1440: HUD, minimap,
inventory, map, system tab and loading screen.
A Steam Deck tester had 1.2 GB free in /home, where the setup put its 1.3 GB of generated C and objects
(~/.cache/totk-setup) and RADV its shader cache (up to 1 GB, about 35 MB a minute at the title screen), while the game
goes to the SD card. The setup's temp is now .setup-temp in the install folder (--temp changes it; the empty-folder
check leaves it out), and totk points MESA_SHADER_CACHE_DIR at mesa-cache beside itself unless it is set. A scan of
every ELF file in the release folder showed the bundled LLVM and the cryptography wheel need glibc 2.34, not the 2.31
the docs gave: make_release_linux.py now checks that floor (check_glibc), the setup's check stops below it
(check.glibc_old) instead of failing on a compiler that cannot start, and the docs give both floors. The Linux notes
also record the testers' results, that the Deck has the host-import extension too, and its software ASTC decoding.
The game sets focus handling mode 2: on a Switch the system then suspends the whole process while it is out of focus.
Here only its main thread stopped, in PopNotificationMessage, while the loader threads, audio and clocks ran on, and a
tester on Hyprland with 1.4.3 saw a load never finish after the window lost and regained the focus; TOTK_ASSUME_FOCUS=1
avoided it. That is now the default (assume_focus in totk.ini, as MacNativeGames always reports in focus); 0 restores
the pause. Each focus change is logged, so a report shows whether the window saw it.
gfx_fit_rect rounded the picture up to an even size, so at 1167x656 a 16:9 picture was 1166 wide and the last column
stayed black, which failed --probe-vkexec; it now takes the window's parity, which keeps the bars equal at any size.
The present check of --probe-vkexec expects the picture's rectangle and black bars, as --probe-window does, so it
passes on a 16:10 screen too. --probe-shader, the draw part of --probe-vkexec and the pipeline self-test looked only
for build/v121/shaders; probe_census_dir takes the running version's census first, then the other one's. The Linux
notes say what the probes need over SSH.
hactool's bundled mbedtls 2.6.1 adds into memory and changes the flags in its MULADDC asm without saying so. gcc builds
happen to work; clang, the Linux release's compiler, keeps values in registers across it at -O1 and above, so every RSA
check failed (NCA header, NPDM, ACID) and the AppImage's setup stopped at the update merge. Found by installing from the
mounted AppImage; a bisection of the mbedtls objects pointed at bignum.o, and the memory and cc clobbers (as later
mbedtls releases have them) fix it. With the patch the full install from the AppImage completes and the game runs.
On Linux, write-protecting memory the GPU imported costs milliseconds per submit and the import's pinning clears the
write watch, so each CPU-visible pool gets a host-visible copy instead: the pages the CPU wrote since the last sync go in
right before each submit (skipping bytes the GPU still has to write back), and the replay's GPU writes are copied back
into guest memory at their fence (vk_gpu_written). In 1.2.1 play it costs about 0.2 ms a frame. TOTK_SHADOW=1 turns it
on under Windows too.
Also: build_game.py fetches the VMA header the Windows release pins when the system has none; plat_localtime and
plat_gmtime reject the times Windows rejects; the SDL text entry honours TOTK_SWKBD_TEST=cancel; probe-vkmem follows
the replay's protocol for GPU writes and syncs.
Shared runtime code now goes through runtime/platform/platform.h, implemented by platform/win32.c and a new
platform/linux.c: futex locks, a userfaultfd and PAGEMAP_SCAN write watch, signal-based async preemption, our own
fiber switch, and a SIGSEGV handler for the thaw and crash hooks. The window, input, menu and software keyboard get
SDL3 back ends beside the Win32 ones, with the swapchain (gfx_present.c) and input merging (input.c) shared. SHA-256
replaces BCrypt, ELF builds get their own override sections, and the build tools gain Linux branches.
On Linux the selftest and the gfx-abi, astc, nvn and window probes pass. probe-vkmem still fails: imported guest
memory cannot be write-watched on Linux, which the shadow buffers in vk_memory.c will address.
The README is a front page now: a general status, a short feature list, install steps from a release, credits as a
list of links that points to THIRD_PARTY_NOTICES.md, the build steps last. The licence table moved into the notices.
The build steps take the game version as <ver>; 1.4.3 is the primary version in the architecture doc, which also
gains the zstd host decoder, the settings table and menu, spin gates, the uniform snapshot and the resolution patches.
Controls list F1, F10, F11 and the menu keys; the tester guide and CONTRIBUTING point to logs\totk.log.
THIRD_PARTY_NOTICES.md: the four code rows that sat in the installer table move to the main table, the zstd rows
cover ov_zstd.c and the release package, the MacNativeGames resolution commit is given in full, the NVN proc list and
the compiler runtime of a source build are listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every flag-setting instruction packed N, Z, C and V into c->nzcv and every reader unpacked them. recomp/flags.py
now runs a reaching-definitions pass per function: a compare stores its operands in a local Flags F, and a reader
whose definitions are all of one kind computes its condition from them, so cmp and b.cond become one host compare.
CCMP, FCMP, MSR NZCV and ADCS write the packed form, which readers reached by several kinds also use. Calls and
returns publish nothing (AAPCS64 neither passes nor preserves NZCV); tail branches, falls into the next function and
br through rt_dispatch publish c->nzcv, since discovery can start a function inside another one. Functions with an
unresolved computed br keep flags in c->nzcv.
1.4.3 main: 492k direct and 89k packed flag reads, .text 342 -> 299 MiB. Fight bench (bench-fight2-2026-10-27b,
frames 5400-7500, uncapped) 13.15 and 13.63 ms vs 13.9 before. tests/flags_check.py checks the new helpers against
the packed ones; tests/diff/func.py no longer compares NZCV, which generated code leaves untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The MacNativeGames BKTR and title-key changes and our UTF-8 manifest lived only in the maintainer's toolchain folder, so
nobody else could build the hactool that extraction and the installer need. The script's exe matches the one in use
byte for byte apart from its build time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/building.md merges the two toolchain docs and the README build steps, and lists the developer checks. The
Maxwell reference moves to docs/maxwell.md. architecture.md loses the milestone table, controls.md describes timed
script lines and input recording, and the tester guide includes shader preparation.
The agent skills, hooks, playbook, backlog and the study notes on upstream projects are the maintainer's local setup:
.claude/, notes/ and CLAUDE.local.md are ignored now, and tools/worktree.py links them into task worktrees. AGENTS.md
keeps the project rules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>