Commit Graph
46 Commits
Author SHA1 Message Date
Wellington Dias cd0917e18d Add a dead zone slider per analog stick to the Controls tab, carrying an older stick_deadzone line over to both. 2026-11-01 02:08:15 -03:00
Valiantsin DzerakhandClaude Opus 5.5 1d6baac9d2 Merge pull request #233: Add colour profiles and brightness, contrast, saturation and gamma for the picture (Lucas-blip-png)
With TOTK_COLOR_* away from their defaults, present_image runs one compute pass (vk_color.c) that writes the game
picture's crop, adjusted, into an RGBA16F image, which FSR 1 or the blit then scales. At the defaults nothing is
recorded and the present takes the same source, format and rectangle as before. The Screen tab gets a Colour group
(profile and four sliders) after the field-of-view slider of #248; cfg.c and totk.ini.example keep both settings.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 21:15:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b768567f8d Merge pull request #248: Add a field-of-view setting for 1.4.3 (Lucas-blip-png)
TOTK_FOV (70..140 percent, Screen tab, live) multiplies the camera's vertical view angle through the new patch set fov
at the two camera routines the aspect set patches; page +60 holds the factor. At the default 100 the set is off and the
camera runs the game's own instructions. Both fov sites and the rest of the 1.4.3 table pass patches.check against the
1.4.3 main. 1.2.1 and 1.1.1 have no fov sites and log that the setting does nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 21:14:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8041ded696 Merge task/crashdiag: menu without the core gate, system font check, abort reports, command buffer diagnostics (#212, #176, #94)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:57:26 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a554a7c13c Take the virtual core gate out of the settings menu
The row was labelled "Virtual core gate" with the text "Lets only one thread run per virtual core, as on the
console", but switching it on wrote free_cores = 1, which lifts the gate. Without the gate guest threads run in
parallel on one virtual core, and TotK keeps its per-core data without locks: an Arc B580 player who turned it on
crashed at every start with "CallCommands: command handle ... is not a live recording" (#212). free_cores stays an
ini key for experiments; the log now says when it is set, and totk.ini.example warns that the game can crash.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:56:48 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e38eaa8224 Turn the recorder thread back on by default on AMD GPUs
The AMD device losses with the recorder (#5, #40) stopped after objects
were kept until their submission completed and the recorder began ending
its own parts; RDNA 1 and 2 cards in #5 ran with vk_recorder on and off.
vk_recorder = 0 still turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:41:38 +03:00
Lucas-blip-png 459d414c29 Add a field-of-view setting for 1.4.3
The camera update and setup routines that the aspect set patches load the camera's vertical view angle a few words
before the ratio and pass it to sead's perspective projection. The new set fov loads the angle as before and multiplies
it by a factor the runtime writes to patch page +60, so TOTK_FOV (70..140 percent, menu Screen tab, live) widens or
narrows the view. The game's own zooms (bow, scope) scale with it; 100 switches the set off.

Checked on 1.4.3 at 1920x1080 at 70, 100, 130 and 140: the view narrows and widens around Link, the HUD is unchanged,
no objects appear or vanish at the edges, no validation errors. 1.2.1 has no fov sites yet (its original words are
unverified here); the setting logs that and does nothing there.
2026-10-31 11:08:06 -04:00
Lucas-blip-pngandSTS78721 c0567191f0 Add colour profiles and brightness, contrast, saturation and gamma for the picture
Issue #136. With TOTK_COLOR_* away from their defaults, present_image runs one compute pass (vk_color.c, shaders/color_grade.comp) that writes the game picture's crop, adjusted, into an RGBA16F image, and FSR 1 or the blit scale that one; at the defaults nothing runs. The Screen tab gets a Colour group: a profile (Game's own, Vivid, Clarity, Custom) that sets the four values, and the four sliders. The adjustment, its order, ranges and presets are STS78721's patch from the issue, reworked onto dev: it now applies with FSR 1 scaling as well as the blit, its menu texts come from the catalog in English and Russian, and the patch's unused accessors and build_game.py change are left out.

Co-authored-by: STS78721 <134802927+STS78721@users.noreply.github.com>
2026-10-31 10:02:16 -04:00
Valiantsin DzerakhandClaude Opus 5.5 98a657dfd1 Give 1.2.1 the camera aspect ratio and the HUD layouts of other shapes
patches-v121.txt takes the aspect set at upstream's 1.2.1 sites (game_patches.c aspect_install): the same two camera
loads and two viewport divisions as 1.4.3, with the same original words and the same replacement from page +56. The
installer now builds the romfs-patches-<w>x<h> overlays for 1.2.1 too; ultrawide_layout.py passes on its
Common.Product.110 at all ten sizes. Checked in game at 3440x1440 (camera 2.3889) and 1920x1200 (1.6000): wider or
taller view, HUD at the corners or edges, no validation errors.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:23:58 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0db841c297 Lay the HUD out for 16:10 game resolutions on 1.4.3
ultrawide_layout.py handled canvases wider than 16:9 only, so the Steam Deck's 1280x800 got the 16:10 camera with
the 16:9 HUD stretched 11% over it. A narrower canvas now scales each layout's root pane in y by the aspect over 16/9,
stretches full-screen backgrounds back and moves the HUD to the top and bottom edges. The pane list and distances are
the TALL table of tools/aspect_layouts.py from pull request #60, in the format of the wide edits; the minimap,
discovery banner and dragon's tears keys are found by walking the animation's curves. Every value is checked against
the shipped one before it is written: 1.4.3's Common.Product.140 and 1.2.1's Common.Product.110 pass at 1280x800 and
1920x1200, and the 3440x1440 overlay is byte-identical to the one before.

The settings menu offers 1280x800, 1680x1050, 1920x1200 and 2560x1600, and the installer builds their overlays with the
21:9 and 32:9 ones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 13:31:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 43a18a9bb1 Merge pull request #60: Linux port (AppImage) and Steam Deck support (wdiasjunior)
The branch forked 79 commits before main and 98 before dev. Resolutions:

1. Aspect ratio: dev's implementation stays (camera patch at page +56 on 1.4.3, tools/ultrawide_layout.py layouts per
   size in romfs-patches-<w>x<h>, the aspect = fit|stretch setting). The PR's second implementation is dropped: the
   aspect sets of patches-v121.txt and patches-v143.txt (the 1.4.3 one patched the same viewport sites as dev's),
   tools/aspect_layouts.py, the resolution.c shapes that limited game resolutions to 16:9, 16:10 and 21:9, and the
   picture_fit setting. Its letterbox code (gfx_fit_rect) is kept and reads TOTK_ASPECT.
2. Code dev changed where the PR moved it: the stick dead zone, the test gamepad and the paddles go to input.c; the
   DPI awareness, keep-awake and IME detach of gfx_window.c go to gfx_window_win.c; device fault reports and GPU
   breadcrumbs to gfx_present.c. gfx_window_dpi gets an SDL version.
3. dev's Win32 calls in shared code go through platform.h: the shader cache pack reader (PlatFile), the romfs
   overlay checks, the audio pacing waits, the motion, ASTC and device fault locks. plat_cpu_usable and
   plat_commit_info get Linux versions; plat_cpu_count counts the machine's processors on both. dpi_probe.c becomes
   dpi_probe_win.c.
4. assume_focus defaults to 1 as the PR has it (a load interrupted by a focus loss can stop for good) and stays live,
   with dev's Game tab row.
5. The frame limits 40 and 45 join dev's list. The BC 3D storage fallback for Vega only runs with
   TOTK_BLOCK_VIEWS_3D=1, since dev makes 3D BC images without block views by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 13:26:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0aa529b4ce Offer the dynamic alpha to coverage switch in the menu and fix stale comments
TOTK_VK_DYN_A2C from pull request #188 gets the settings row, the Advanced tab choice and the totk.ini.example
line that TOTK_VK_DYN_VERTEX has. The IME comment in gfx_window.c window_main named a walk key the runtime does not
have, and ov_system.c still said TOTK_ASSUME_FOCUS opens the window without focus, which TOTK_BACKGROUND_WINDOW does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 12:54:05 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5cbabc4e77 Merge pull request #187: Offer the 32:9 sizes 3840x1080 and 5120x1440 with their HUD layout (Lucas-blip-png)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 12:51:50 +03:00
shenjack e4eef8ae0c Offer the keep-running-out-of-focus switch in the Game tab
The game pauses whenever its window loses focus, as it does on the Switch when Home is pressed, and ASSUME_FOCUS was the
only way to change that: a known key with no row in the settings table. The runtime reads it at each focus change rather
than once at start, so the row takes effect the next time the window is left, and the build guide says what an unfocused
window now does.
2026-10-31 16:50:32 +08:00
Lucas-blip-png 76563b34a9 Offer the 32:9 sizes 3840x1080 and 5120x1440 as game resolutions with their HUD layout
tools/ultrawide_layout.py computes every edit from the canvas aspect, so 32:9 needs no new layout data: the installer now builds romfs-patches-3840x1080 and -5120x1440 beside the four 21:9 sizes, and the menu lists both. Before, a 32:9 output_res got the wide camera with the 16:9 HUD stretched over it (issue #181).
2026-10-31 04:16:55 -04:00
Valiantsin Dzerakh 9044d4c02b Merge task/xboxprompts: Xbox button prompts layout, from pull request #126
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

# Conflicts:
#	installer/steps.py
#	runtime/romfs.c
#	tools/make_romfs_patches.py
2026-10-31 08:19:29 +03:00
mrtink125792andClaude Opus 5.5 bb85bc8a80 Add an Xbox prompts button layout: Switch positions with the A/B and X/Y prompts swapped to the Xbox labels
With pad_layout = nintendo on an Xbox pad the right button does Switch A but is labelled B, the bottom one does B but is
labelled A, and the game's prompts still name the Switch buttons. A fourth Button layout choice, Xbox prompts (A right)
(pad_layout = xbox_prompts), maps the buttons as nintendo and swaps the prompts to the labels, so each prompt names the
button to press. Automatic, Nintendo and Xbox are unchanged and keep the game's own prompts. The buttons change at once;
the prompts at the next start, as the game reads its UI archive and fonts at boot (the menu says so).

At start, xbox_prompts loads romfs-patches-xbox in place of romfs-patches (runtime/romfs.c overlay_init).
tools/make_romfs_patches.py --xbox-prompts writes it from the player's own RomFS, with the 60 fps patches; nothing from
the game or a mod is added to the repository. It swaps A with B and X with Y in:
- the letter images Nt_KeyTexA/B/X/Y_00 of the action prompt (DoCommand_00), in the Common archive's __Combined.bntx
  (same format, size and tiling, so the image data trades places);
- the action prompt's diamond of the other face buttons: one-letter text panes the game fills from
  LayoutMsg/DoCommand_00.msbt in each language's Mals archive (both the messages and the layout's own text);
- the button glyphs U+E040 to U+E043 of scft/External.bfotf in each Font/Font*.bfarc, which every other prompt uses
  (CFF outlines and metrics in the deobfuscated OpenType font, then its checksums).
The diamond's shape shows the button's position and stays. The setup writes both folders; the menu notes when the Xbox
prompt files are missing and when the prompts in use differ from the choice until a restart.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:51:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9745206f2a Document the ultrawide sizes, the fit default of aspect and the 1.4.3 limit
Wide sizes other than the four the installer prepares get the wide camera with a 16:9 HUD stretched over it. aspect = fit letterboxes a 16:9 game in a wider window where it used to stretch. Ultrawide is 1.4.3 only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 07:45:41 +03:00
Seth 582f675e88 Render a game resolution wider than 16:9 at its own shape, with black bars as the fallback
An output_res such as 3440x1440 now widens the camera's view to that shape on 1.4.3: patches-v143.txt
sets the aspect ratio at the camera and viewport sites that hand it to the perspective projection.
The HUD and menus come from a romfs-patches-<w>x<h> overlay that make_romfs_patches.py --aspect
builds through tools/ultrawide_layout.py, and romfs.c overlay_init picks that overlay when the game
resolution is not 16:9. The installer prepares it for 2560x1080, 3440x1440, 3840x1600 and 5120x2160.

When the window's shape differs from the game resolution's, the new aspect setting keeps the
picture's shape with black bars (fit, the default) or stretches it over the window.
2026-10-31 07:43:44 +03:00
Seth 70a83837b0 Let the back paddles be bound
SDL reports the back buttons of an Xbox Elite, DualSense Edge or Steam
Controller as four paddle buttons, but the pad table stopped at the
triggers, so they could not be mapped. They are now pad inputs lpaddle1,
rpaddle1, lpaddle2 and rpaddle2, with no default action, bindable from
totk.ini or the remapping rows.
2026-10-31 07:25:27 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ed1973a68b Add a stick dead zone setting for drifting gamepads
stick_deadzone (0 to 50 percent, default 8) replaces the fixed per-axis cutoff of 2500. The zone is round and the
travel past it is scaled to start at 0, so a drifting stick rests centred and full deflection still reaches full.
The Controls tab shows it as a slider; --probe-cfg checks the math (input_pad_stick).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:05:54 +03:00
Wellington Dias 7285688165 Give the interface its proportions at 16:10 and 21:9, and limit game resolutions to those shapes and 16:9.
The game lays its interface out in a 1920x1080 space and draws it over the whole output, so at 1280x800 every menu and
the HUD were 11 % taller than drawn, and at 21:9 34 % wider. tools/aspect_layouts.py rewrites the layout archive for
each shape: every layout's root pane scaled back, full-screen backgrounds kept full, the HUD moved to the screen's
edges, and the minimap, place name and dragon's tears map icon animations adjusted. It follows the behaviour of
Fruithapje21's TOTK-Ultrawide (GPL-3.0, read for behaviour only) and checks every original value before it writes.
make_romfs_patches.py writes the results to romfs-patches/16x10 and 21x9 at install and build time, and romfs.c serves
the one of the output's shape. resolution.c accepts 16:9, 16:10 and 21:9; another shape draws 16:9 with bars. The
menu lists the game resolutions by shape. Checked on 1.2.1 and 1.4.3 at 1280x800 and 3440x1440: HUD, minimap,
inventory, map, system tab and loading screen.
2026-10-30 16:23:58 -03:00
Wellington Dias 021413740d Keep the game in focus by default, so switching windows during a load no longer stops it for good.
The game sets focus handling mode 2: on a Switch the system then suspends the whole process while it is out of focus.
Here only its main thread stopped, in PopNotificationMessage, while the loader threads, audio and clocks ran on, and a
tester on Hyprland with 1.4.3 saw a load never finish after the window lost and regained the focus; TOTK_ASSUME_FOCUS=1
avoided it. That is now the default (assume_focus in totk.ini, as MacNativeGames always reports in focus); 0 restores
the pause. Each focus change is logged, so a report shows whether the window saw it.
2026-10-30 14:56:13 -03:00
Valiantsin DzerakhandClaude Opus 5.5 43704c0d9f Turn off the recorder thread on AMD GPUs and GPL on AMD's RDNA 1/2 driver, and log GPU breadcrumbs on a lost device
AMD drivers lost the device at boot or at menu opens with the recorder thread; vk_recorder = 0 ended it for three
RX 9070 XT users (issue #5), and RADV saw an illegal opcode at the end of a command buffer (issue #40). It now
defaults to off on vendor 0x1002; TOTK_VK_RECORDER=1 turns it back on.

On AMD's separate driver branch for RDNA 1/2 ("AMD proprietary shader compiler") every device loss came with a cold
pipeline cache and draws waiting on fast-linked pipelines, and the recorder setting did not help there. TOTK_GPL now
has no fixed default: off on that branch, on elsewhere.

VK_AMD_buffer_marker breadcrumbs (vk_crumbs.c) mark the start and end of each submission part, upload batch, ASTC
decode chunk and present; on device lost the log names the last point the GPU reached and the last one it finished.

vk_fsr.c ensure_images held no queue lock around vkDeviceWaitIdle, which needs every queue externally synchronized.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:48:38 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3332250df4 Merge task/dpiaware: per-monitor DPI awareness for the window, fullscreen and the overlay
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:35:21 +03:00
Valiantsin DzerakhandClaude Opus 5.5 abb00c500c Add a diagnostics key for the fence write-back size limit and trace the targets it skips
wb_fence_limit (TOTK_WB_FENCE_LIMIT, default 65536) replaces the fixed 64 KiB limit of the write-back done when the CPU waits for a fence. With trace = gfx the log names each dirty target left on the GPU because of its size and each target over 64 KiB that a raised limit wrote back. Meant to test whether the fuse weapon switch bug (#18) and the Purah Pad camera bug (#13, #63) come from a target the game reads on the CPU without an invalidate.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:27:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 fcaecabad4 Make totk.exe per-monitor DPI aware so fullscreen and the window use physical pixels
The manifest declared no DPI awareness, so Windows ran the process DPI-unaware: on a 4K monitor at 150% scale the
fullscreen window and its swapchain were 2560x1440, the 4K game image was shrunk to it and Windows stretched the
result back up, blurred (issues #25, #56, #31).

The manifest now declares PerMonitorV2 (true/pm for older Windows 10). The window frame is measured at the window's
DPI, a framed window keeps its client size when it moves to a monitor at another scale, WM_DPICHANGED takes the
suggested rect or keeps fullscreen over the monitor, and window_size means screen pixels. The menu's minimum text
size follows the window's DPI, and the text entry dialog is measured at the game window's DPI. --probe-dpi prints
the process awareness and fails unless it is per-monitor v2.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:40:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d8547a84ac Offer 90 FPS in the frame rate limit menu
GitHub issue #21 asks for a 90 fps limit. fps_limit = 90 in totk.ini already worked, because frame_rate.c accepts any whole
rate from 30 to 360 and cfg.c does not validate the values column. The menu row and the documented value lists did not
name it. Added 90 to the menu between 60 and 120 (new catalog id UI_MENU_FPS_90 in both languages), to the FPS_LIMIT
row in cfg.c and to totk.ini.example.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:30:09 +03:00
Wellington Dias aa030e4e28 Give 1.4.3 the aspect patch, so it draws 16:10 and 21:9 like 1.2.1.
The 1.4.3 sites, found by their code: the camera parameter reader's DefaultAspect default (main+0x1aa0ac4, the default
at main+0x2d06910), the two camera-viewport updates (0x1ff04f4, 0x253fbb0, where the division becomes the page load
because x9 is free after the dirty-flag store) and two of the 2D canvas-size loads (0x2136fa8, 0x213641c). Three of
1.2.1's five canvas loads have no match yet; switching them off on 1.2.1 left the gameplay HUD and the system menu
unchanged at 21:9. At 16:10 and 21:9 the 1.4.3 title and gameplay show a round emblem, an unstretched world and the
HUD at the screen's edges.
2026-10-29 23:05:30 -03:00
Wellington Dias f3ab1b0e76 Give the camera and interface the output's shape on 1.2.1, so 16:10 and 21:9 are not stretched.
The aspect patch set (recomp/patches-v121.txt) makes the world camera's DefaultAspect parameter default, the two
camera-viewport updates that divide a 16:9 rectangle, and the five loads of the 2D canvas size read the patch page.
resolution.c writes the output's aspect and the canvas factors there (wider than 16:9 the canvas grows in x, narrower
in y) and switches the set on when the game resolution is not 16:9. The sites are those of Fruithapje21's
TOTK-Ultrawide 1.2.1 patch (GPL-3.0, read for behaviour); a heap scan of the live projections confirmed the four world
cameras take the new aspect. The interface keeps its 16:9 layout in the middle of the canvas: the per-layout edits
that move it to the screen's edges are not done.

A version without the set (1.4.3 for now) draws the largest 16:9 size inside the wanted one, letterboxed. The Steam
Deck profile now draws the screen's own 1280x800, and the menu offers 16:10 and 21:9 game resolutions.
2026-10-29 22:20:59 -03:00
Wellington Dias 2f78585b4c Add a Steam Deck profile and keep the picture's proportions on screens of another shape.
The present fits the game's picture into the largest centred rectangle of its own aspect ratio and clears the rest to
black (gfx_fit_rect, through both the blit and FSR), so a 16:9 game on the Deck's 16:10 screen is no longer stretched;
picture_fit = stretch keeps the old fill. probe-window checks the bars as well as the picture.

device_profile = auto|desktop|deck: on a Steam Deck (the firmware's Valve Jupiter or Galileo board, or SteamDeck=1) the
keys totk.ini does not set default to fullscreen, a 1280x800 window, a 1280x720 game resolution, the game's own scene
scale, vsync and a 40 fps limit; the environment and totk.ini still win. These are starting points until measured on
the device (docs/tester-guide.md, Steam Deck).

Both stick clicks (L3 + R3) step the performance overlay as F10 does, for a controller with no keyboard. The menu offers
1280x720 and 1600x900 game resolutions and 40, 45 and 90 fps limits.
2026-10-29 18:14:30 -03:00
Valiantsin DzerakhandClaude Opus 5.5 8691f6d724 Remap keys, mouse buttons and controller buttons from the Controls tab
Every Switch button and the eight stick directions the keys drive get two key cells and a controller cell under the
button layout. A cell takes the next key, mouse button or controller button pressed; a key in use moves over, a
controller button swaps. The tab writes bind_ lines (new: bind_LSTICK_* / bind_RSTICK_*, key:default, pad:default) and
input_win.c builds the tables again when one changes, so remapping applies while the game runs. More keys can be
bound: Enter, Backspace, right Shift and Ctrl, Alt, the numpad, punctuation, F2-F7, F9, F12, mouse buttons 4 and 5.
Alt alone no longer enters the window menu loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:53:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ba0f33e044 Pick the gamepad button layout by the pad's labels, with a Button layout row on the Controls tab
The gamepad map was by position only, so on an Xbox pad the button labelled A pressed Switch B. pad_layout = auto
(default) keeps the Nintendo layout for a pad whose east button SDL reports labelled A and uses the Xbox layout (south
A, east B, west X, north Y; cross A on a PlayStation pad) for the others; nintendo and xbox force one. It applies at
once; bind_ lines name physical buttons and apply on top of either layout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:20:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f654da3d8b List the performance and diagnostics keys in totk.ini.example with what each does and its default
The file pointed at the Advanced tab for them; it now has every key the tab shows, grouped as the tab groups them, and
a [diagnostics] section for trace and the flight recorder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:20:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8ea1b5721f Update the remaining explanatory files: issue form, contributing, maxwell sources, settings example, comment rule
The bug form asks for the version on the settings menu's title line instead of the window title, which has none,
points to Copy system info and to logs\totk.log. CONTRIBUTING lists the lifter's differential tests and the commit
message style for pull requests. docs/maxwell.md cites nxnative's notes by name, since nxnative rewrote them and the
line numbers pointed nowhere, and pins the MacNativeGames shorthand to the commit its line numbers were read at.
totk.ini.example gains menu_lang and input_record and points to the menu's Advanced tab for the other keys. AGENTS.md
asks comments to cite upstream code by project, file and function. README: Linux and the Steam Deck are the platforms
planned.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:12:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 eca89641fa Keep 1.2.1's scene at the wanted size, package zstd for the installer
1.2.1 renders the scene size it reads, while 1.4.3 scales it by output width / 1920: on 1.2.1 the scene set is on
whenever the output grows (2560x1440 gave a 1600x900 scene before, 2133x1199 now). An output at or below the shipped
size needs no grown HeapDef. The release deps carry the static libzstd and its header, totk.ini.example the four new
keys, THIRD_PARTY_NOTICES.md the MacNativeGames sites, FSR 1 and zstd.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 13:56:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b1cbbb93a6 Make the frame limit a setting: 30, 60, 120, 144 or the monitor's refresh rate
TOTK_FPS_LIMIT (fps_limit in totk.ini, live, menu row on the Game tab) replaces the 30/60 choice of TOTK_FPS60. The
pacer holds frames to the limit in nanoseconds instead of 60 Hz ticks; the real-time step has no lower bound, so game
speed stays 1.000 above 60. `display` follows the exact refresh rate of the window's monitor (QueryDisplayConfig),
measured again when the window moves or the display mode changes. A limit of 30 switches the patch set fps60 off as
before; unset, the older fps60 = 0 still means 30. Above 60 needs the real-time step and is marked experimental.

The vsync event stays at 60 Hz: on 1.4.3 the title runs at 144 fps with it, so the game does not wait for it each
frame. Field on machine A: 69-88 fps, CPU-bound (GPU 3.4 ms per frame).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:39:13 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c757a42798 Add the frame rate overlay: TOTK_PERF_OVERLAY fps shows the frame rate in the top right corner, full adds the mean and longest frame time of the last half second, F10 cycles the modes and saves the choice
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:50:45 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c6a7a28ab4 Compile Dear ImGui and draw the menu overlay into the swapchain image, behind the test hook TOTK_MENU_TEST until the pages are agreed
The window follows TOTK_WINDOW_SIZE, TOTK_FULLSCREEN and TOTK_VK_PRESENT while the game runs, and F11 saves the fullscreen state.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:35:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c3b3c297cf Merge main into task/menu: keep main's button remapping, Esc cursor release and new settings beside the live settings, with one live mouse sensitivity
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:27:26 +03:00
Valiantsin DzerakhandClaude Opus 5.5 31b864380f Keep the replay on the submitting thread unless TOTK_REPLAY_ASYNC=1, since no timing showed a gain yet, and list async_preempt and replay_async in totk.ini.example
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:23:27 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a220b89459 Collect the open work in one list in docs/backlog.md, read the shared shader list's "*" texture kind as 2D, and record measurements from the other test machines
The backlog gets one "Open work" section: freezes, bugs (the Yunobo fade with its repro), machine items and paused
branches. prepare_shaders.py no longer stops on the "*" and "*_depth" texture kinds of the newer list revisions.
The playbook records the GTX 1050 Ti, RTX 3090 Ti and 8th-gen i7 numbers and how to get a perf log from those
machines; port-lessons gains the MacNativeGames virtual-core preemption row; totk.ini.example lists mouse_sens.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:16:10 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e8697659ac Remap gamepad buttons and keys with bind_<button> lines in totk.ini, one data-driven table for the pad and one for keys
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 08:50:48 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b9a7896095 Make settings changeable while the game runs and save them back to totk.ini
cfg_set stores a value in memory and bumps cfg_version; consumers that keep a
parsed value compare the version and parse again when it changed. cfg_save
rewrites only the changed lines of totk.ini, keeps comments, and adds a missing
key under its section (after its commented example line when there is one).
The environment still wins over both.

Live consumers: volume (new TOTK_VOLUME host gain in the mixer), frame limit
(TOTK_FPS60 switches the fps60 patch set and the pacer caps at 30 or 60),
rumble strength, curve and triggers, gyro on or off, mouse sensitivity.
TOTK_MOTION=0 and rumble strength 0 now keep their hid handles and read at
rest or stay silent, so they can be turned back on. --probe-cfg covers
cfg_set and cfg_save.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 23:54:56 +03:00
Valiantsin DzerakhandClaude Opus 5.5 dda22f6e01 Add rumble strength, curve and trigger settings for Xbox pads
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 23:12:15 +03:00
Valiantsin DzerakhandClaude Opus 5.5 19c9b648d1 Add the recompiler, Windows runtime, tools and docs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 22:27:54 +03:00