With mouse_mode = direct the mouse reached only the cameras the direct hooks cover. Autobuild's placement camera runs
none of them on games 1.4.3 and 1.2.1 and turns by the right stick, so the mouse moved nothing there. mouse_direct.c
now notes each camera step that runs a hook; after two steps without one the mouse acts as the right stick
(input.c mouse_camera), as with mouse_mode = stick, until a hook runs again. A script's MOUSE lines move that stick
too, also under TOTK_INPUT=none, so the path can be tested with scripted input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Patch 0017 adds two support buffer fields, which every translated shader declares, so the SPIR-V hash of the game's FXAA shader changed (0x5c43ae18948d52cb to 0xde20aef90fea4ce6, with zero_locals 0xaad42238801d31d8 to 0x755964e8dce7f34d). vk_dlaa_skip_draw then no longer skipped the scaling draw DLSS replaces, and on 1.4.3 that draw, sampling DLSS's output-sized picture in place of the scene, stretched the picture's top left over the whole screen in every DLSS mode but dlaa. FXAA_FS gets the two new hashes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pcss radii and penumbra factor were in UV of whichever cascade map a pixel read, the same in every cascade. Each cascade's map spans 3.5 to 5 times the ground of the one before (measured on 1.4.3: the cascades end at about 4, 27, 120 and 450 m), so a soft shadow turned that much softer at every cascade step, a step that moves with the camera (issue #1291).
The runtime now measures each cascade from the camera block the lighting shaders read (c4 rows 42 to 57, a projective matrix per cascade, and row 58, the cascade ends): the UV and depth per metre where the cascade begins and ends. It passes two factors per cascade in two new support buffer fields, pcss_depth and pcss_scale, and translator patch 0017 applies them in the PCSS lookup. The values keep their meaning in the second cascade, which holds most shadows on screen, so the look at a given pcss value stays where most players see it. The narrowest radius stays in texels. The HDR field moves from byte 1440 to 1472. With pcss = 0 nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A call adds no command memory since the previous commit. Control memory grew only at EndRecording, so a buffer queried
after calls and before its first EndRecording reported 0 command and 0 control bytes, which the game treats as an empty
buffer. The game's inline copy of the driver's call (1.4.3 main+0x2d33a4) writes one 24-byte control entry per segment
of the called handle; each called handle now adds that much. The NVN probe checks that a call-only buffer reports 0
command and some control memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The real driver puts a call in control memory, so a call adds no command memory; a copy adds what the copied commands
take on hardware. We added our record bytes of the inlined recording for both. On 1.4.3 the game queries recordings
that hold calls every frame (field save, 20 s: 15,700 such queries from six call sites, up to 14,604 bytes reported
where the driver rule gives 3,204); copies were not seen. Each recording now keeps its hardware size from EndRecording
(copy_prefix.hw), and memory added while recording keeps that size whole. Same accounting as MacNativeGames 6909dbb7,
which measured 40 bytes on the original driver where their port reported 88 and traced a renderer heap crash near
Zora's Domain to the larger sizes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
input_rumble used to call SDL_RumbleGamepad under the input lock; on a Bluetooth pad the write can take tens of milliseconds and stalled SendVibrationValue and every other user of the lock. It now stores the newest request and wakes a rumble worker, which sends only the latest one. The worker takes its own handle on the open pad (SDL_OpenGamepad of its id) under the lock and writes without it, so closing the pad meanwhile cannot free it under the write. A pad going away drops the pending request, and exit sends a zero request. TOTK_TEST_PAD_RUMBLE_MS makes the test gamepad rumble with a slow write. Idea from Savage Wind Recomp commit a8ad674 (issue #730).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The previous commit read the combo from the merged buttons, where a key bound to ZL is the same bit as the left
trigger: with freecam_pad = zl+zr, the right mouse button and F switched the free camera in play. The keyboard has
freecam_key for that, so the gamepad combo now counts the gamepad and the input script, which stands in for one.
runtime/input.c poll_merged: script_apply writes its buttons into script_seen, which is then merged into the buttons as
before. freecam_gate counts a position of the combo when pad_seen has it or script_seen has the Switch buttons it stands
for; Home stays gamepad only. docs/controls.md ("Free camera") says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
freecam_gate read the combo from the physical gamepad only, so a tester's input script that pressed ZL+ZR+L3
sent it to the game instead (#1213). Each position of the combo now also counts when the Switch buttons it stands
for are down in the merged buttons, as the Minus+Plus menu combo already does; Home has no Switch button and stays
gamepad only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
freecam_key and freecam_pad were F6 and ZL+ZR+L3 for everyone, potentially causing unwanted toggles. F6 is also the
quick save key of #1188. Both are none now.
runtime/cfg.c: the FREECAM_PAD and FREECAM_KEY rows of the settings table default to none. runtime/input.c
freecam_pad_mask reads the combo with cfg_value instead of falling back to its own zl+zr+lstick, so an unset combo is
the table's none like the key. The comments in runtime/freecam.c, runtime/input.c and runtime/ui/menu.cpp
rows_freecam, docs/controls.md ("Free camera") and totk.ini.example say so and keep F6 and ZL+ZR+L3 as examples.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
input.c freecam_gate also switches the free camera on a press of TOTK_FREECAM_KEY (f6 by default, none for no key).
While it is on, ZL, ZR, L and R come from the merged Switch buttons, so the keys bound to them (Z, X, Q and R by
default) go down, up and change the speed like the gamepad's; the keys' sticks already flew and turned it. The mouse's
counts are taken in the poll and turn it at the game camera's rate (0.08 degrees a count times mouse_sens, through
freecam_mouse), and input_direct_mouse_sample gives the game's mouse camera none meanwhile; in the stick emulation mode
the mouse arrives in the right stick as before. The Controls tab gets a Free camera key row (off, F2 to F7, F9), with
text in all four menu languages; docs/controls.md lists the keyboard column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A row under the walk rows offers the trigger pair or the shoulder pair with either stick click, or off, named as the
open pad labels its buttons (binds_page.cpp binds_pad_label, the Controls tab's labels). TOTK_FREECAM_PAD gets a live
row in the cfg table with its default zl+zr+lstick; totk.ini still takes any combo of button positions, shown as
written. On other game versions than 1.4.3 the row is off and says so. Text in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The camera component update (main+0x628460) copies each component's eye, target and up into its sead camera. The site
freecam (main+0x6286d4, the load every path to that copy runs first) calls runtime/freecam.c freecam_hook, which
writes the component's one-shot eye and target overrides (+0x180, +0x198) while the free camera is on; the update
takes them in place of the pose and clears them, so the game camera's own state is never changed and resumes the
frame the free camera ends. The up vector is levelled through the component's up offset (+0x200), which is kept and
put back. Of the three components a frame updates, the hook drives the two that share the player camera's eye, leaves
the one at the default pose and picks again after a load; with the free camera off it does only the displaced load.
input.c freecam_gate latches TOTK_FREECAM_PAD (zl+zr+lstick when unset, none for no combo) like Minus+Plus and, while
the free camera is on, gives it the sticks, the trigger axes and L and R presses and the game nothing. The left stick
flies along the view and sideways, the triggers straight up and down, the right stick turns, each L or R press halves
or doubles the speed (0.25 to 512 m/s, 8 at the start); the flight follows the wall clock. TOTK_FREECAM_PATCH=0
removes the hook.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_read stores what pad_physical saw (pad_seen, by PAD_* position, with the Home / Guide button after the Switch
buttons as PAD_GUIDE) and the two trigger axes (trigger_seen), under the input lock, for gamepad combos that are no
Switch buttons and for analog trigger readers. input_pad_combo parses a setting of button positions joined with +
(the bind_ lines' pad: names plus guide or home) into a mask, logging a name that is no button. input_map.c exports
input_key_id and input_pad_id, and ui/binds_page.cpp binds_pad_label gives the label the open pad has on a button,
so menu rows can name buttons as the Controls tab does. No behaviour changes on its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The two launchers of Tenbez Shrine (DgnObj_BoxShutter_4x4x4, AI ShutterFence) throw the stone ball less far the
shorter the frame is: at 60 fps and above it lands on the rim of the receiving launcher and is juggled there or
knocked into the pit. The shrine's map raises their speed by 1 % for what looks like Nintendo's 60 fps Switch 2
build (SpeedForOunce and shouldUseOunceSpeed), which the Switch build of QueryBlackboardGetF32FromActorForOunce
ignores. The new set shutter (TOTK_HIGHFPS_FIX) multiplies the value that node returns by 1 + 0.065 * (1 - ratio)^2
when its shouldUseOunceKey input is true: the factor that keeps the flight of 30 fps at 45 to 144 fps, and 1 at a
ratio of 1 or more.
Co-Authored-By: Claude <noreply@anthropic.com>
The texts that came with the audiodrain set (docs/settings.md, totk.ini.example, the comments in patches-v121.txt and
patches-v143.txt) said that above about 200 game updates a second the game switches its sound off. Every run behind
them had captured the mix with audio = none. With a device playing, on Linux with PipeWire, the game keeps its sound at
240 fps without the set.
The guard (1.2.1 main+0x9bcdc4) sets its count back to 0 whenever a free list is there (0x9bce00), which takes two
audio frames between two updates of the game. The mixer's timer renders one frame every 5 ms, so at 240 updates a
second that never happens and the count reaches 300. A device paces the render thread in bursts after each period
(audren.c, gap_ns: 4 ms apart on Linux; 0 on Windows, read from the code and not measured), so it happens several times
a second. Sampled on the render thread on Linux with PipeWire's 1024-frame periods: 200 frames a second either way, 76%
of them 4 ms after the one before with the device, 939 of 940 at 5 ms with the timer. The count and the switch have
not been read in a run.
The mixer also keeps time by its timer while a device takes nothing. Measured at fps_limit 240, same save and input
script, with the game's audio stream paused from outside (pw-cli on its PipeWire node, not a real device stalling)
while the game ran at 240 fps. On 1.2.1 with the set off a pause of 5 s (two runs) and of 2 s (two runs) left the game
silent to the end of the run, also after the device resumed, and a pause of 1 s (one run) did not; with the set on a
pause of 5 s (two runs) left only the gap. On 1.4.3, one run each: silent after a pause of 5 s and of 2 s with the set
off, sound after a pause of 5 s with it on, sound with a device and no pause with the set off.
The numbers without a device now come from runs that can be named: 1.2.1 6 of 119 and 111 of 119, 1.4.3 3 of 119 and
113 of 120 (set off and on). They replace 5 of 118 / 108 of 118 and 2 of 118 / 110 of 119, which I cannot match to a
run any more.
Text only: no code, no site and no default changes. Not measured: Windows, a device with periods of 240 frames or
less, a real device stalling, 1.4.3 with a device and the set on.
Co-Authored-By: Claude <noreply@anthropic.com>
The default output_res keeps the display's shape only while that shape has the
prompts' folder (cfg.c shape_keeps_prompts). After a switch to PlayStation
prompts on a 21:9 display the default was 1920x1080, so the start and the menu
asked only for the 16:9 folder and the game stayed 16:9. cfg_screen_size gives
the display's size while the player set no output_res.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When the game resolution, the HUD width, the button prompts or the pad layout need a folder the install lacks (an
older setup, a failed setup step, a new display), totk.exe starts the setup's generator for it in the background
with the tools build-cache/rebuild.txt names, once per folder and process: at start for the settings in effect
(the resolution output_res asks for, also when the missing layout made this start 16:9), and from the settings
menu once a changed choice has stayed for 1.5 seconds or the menu closes. A missing 16:9 prompts folder is made too,
the PC prompts from totk.ini's bindings. The notes under Game resolution and Button prompts say the files are being
made and are used at the next start; when the tools did not start they say so and Try again starts them again.
The Prepare button is gone. Source builds without rebuild.txt and TOTK_ROMFS_PATCHES keep the old behaviour.
romfs_shape_missing and romfs_shape_prepare become romfs_folders_missing (a mask of the missing folders) and
romfs_folders_prepare; --probe-cfg and tests/romfs_shapes_check.py check the new decisions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/make_romfs_patches.py writes into <out>.part-<pid> and renames it to <out> once every file and the manifest
are there. With --background (for runs the game starts) it runs at below-normal priority, does nothing when <out>
already has a manifest, and drops its own result when another run finished <out> first, so two runs for one folder
do not mix their files and a folder a running game loaded is never written into. Without the flag <out> is replaced
whole, as the setup and source builds expect. A .part folder left by a stopped run goes once it is an hour old: the
next run for that folder or the setup's clean-up removes it. build_game.py copy_romfs_patches skips .part folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prepare_draw sets ex->volume_bias where the draw's dynamic state changes, so record_fixed reads a flag instead of
checking the pipeline state on every draw. A census of the matching draws in the field, the town and rain found two more
states with the same blend and depth signature, both tested GREATER: the volume's back faces into the same channel and
another shader's front faces into red. GREATER's equal case fails, and the bias toward passing turned the game's tie
the other way for them; they are now left as the game sets them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prompts = playstation shows the face buttons as circle, cross, triangle and square, L1 R1 L2 R2, Options and Share.
The setup writes romfs-patches-playstation (pad_layout = nintendo) and romfs-patches-playstation-xbox (xbox, auto) on
every install, next to the Xbox folders, and the Shapes step and the settings menu make their shaped folders like the
other styles. playstation-xbox lays the action prompt's diamond out as xbox-label does, cross at the bottom.
Rebased onto dev from pull request #741 by fabiomode2: the shaped folders, hud_width, the Xbox diamond and the
keyboard prompts' text glyphs of dev are kept, and cfg.c's shape default uses input_prompts_folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>