Commit Graph
293 Commits
Author SHA1 Message Date
MaxsTechReview 4349563fd1 feat(display): zero-copy presentation toggle and compositor display buffers (#2905)
* feat(display): zero-copy presentation toggle and compositor display buffers

Adds a Zero-copy presentation switch under Steam Settings, Display,
Session Display (on by default), and a display-buffer allocator in the
compositor: a Vulkan driver that states displayBuffers asks it for the
memory of the images it exports, so frames presented through the nested
compositor are gralloc buffers that go on the display layer without a
copy. Compressed buffers are offered only where the device's allocator
matches the layout the drivers render to; everything else stays on the
copy path.

The private buffer protocol is renamed to droiddeck-ahb-v1.

* fix(display): zero-copy frames keep the full refresh rate

Two buffers set on the game layer inside one refresh replaced each other, and a frame that slipped into the next refresh made the compositor hold and drop the on-time frame behind it. The layer now queues buffers, and a refresh takes a second frame when the one before it took none. The pacing tool no longer counts its dump time in the frame rate.

* Keep cropped scenes on the display layer and pace layer frames evenly

Accept any in-bounds source crop for the display layer and map the draw
geometry the same way the copy path does. Time layer frames against the
display's frame timeline, and when the game's rate is a steady whole
fraction of the refresh rate show each frame a fixed number of refreshes
after the last so uneven arrivals no longer reach the screen.

* List zero-copy in the settings map

* Hold display buffers until the display releases them

A buffer the game or gamescope rendered straight into went back to its
client as soon as the next one was latched, with the display's release
fence attached to the dma-buf. The KGSL driver does not wait on that
fence, so the client could draw into a buffer the panel was still
reading. Display buffers now wait for the release fence before the
release event, and gamescope composites only into output images the
host has released.

* Keep the game picture copy-free when an overlay has no display layer

When the display cannot give a second layer of its own to an overlay,
the compositor tells gamescope how many planes it can show directly.
gamescope then composes its overlays into the game picture, which still
reaches the display without a copy.

* feat(session): the panel refresh rate follows the session's frame rate

The session learns the panel's refresh rates and reports the refresh rate and
frame rate it wants. The panel moves to the highest rate the frame rate divides
evenly, frame generation counts at its output rate, and a panel whose rate the
system holds offers only that rate.

* feat(session): the panel follows a frame rate the game holds on its own

The compositor reports the game's frame rate once a second. A rate that
holds for three seconds and divides a panel rate becomes the content
rate when neither the app's limit nor the session's limiter is setting
the pace, so a game capped in its own settings gets a panel rate its
frames divide into. A rate that was dropped has to hold twice as long
before it is used again.

* Show generated frames on the game's display layer

With frame generation on, the game's own frames stay on their display
layer untouched and each generated frame is placed on the same layer
between them, timed across the game's frame interval. The compositor
pass is kept when effects, HDR routing or a cursor need it, or when the
panel cannot show the multiplied rate.

* Keep scaling, generated frames and HDR on the display layer

A scaler or frame generation with zero-copy on now draws once into the
display layer instead of falling back to the copied surface. HDR output
goes to the layer when the panel supports it; on a panel without HDR the
picture is tone-mapped on the same path, and the toggle is labelled to
match what the panel can do.

* Spread a frame limit the refresh rate does not divide evenly across refreshes

* Cover the spare-tick and panel-rate paths in the compositor source tests

* Pin the gamescope build with the display-plane, release, refresh and limiter patches

* Give the layer and terminal-caller harnesses the black fill state they compile against

* feat(display): switch HDR during a session without restarting the app

The compositor now offers HDR whenever the device can present it, and the
HDR setting only decides whether the session uses it. Both HDR switches set
gamescope's hdr_enabled, the compositor's HDR output and zero-copy for the
running session. gamescope patch 0139 lets hdr_enabled change after start.
The 'Restart the app to apply.' hint is removed from every locale.

* Remake the output images in the new format when HDR is switched during a session

* Pin the gamescope build that switches HDR during a session

* Apply a saved HDR opt-out at session start and keep HDR retries with their session

* Serialise the HDR output switch with the gate opening

* feat(display): keep the client's HDR setting and the session's in step

The session publishes its HDR state with the other device controls and the
client helper applies it to the client's own display setting. A change made in
the client is reported back and goes through the same switch the drawer and
Session Display use, so all three always show one value.

* fix(desktop): keep the display-buffer socket when the runtime directory is cleared

The desktop launcher removed everything in the runtime directory except the
compositor's Wayland socket, which took the display-buffer socket with it, so
no desktop program could ask for display buffers and every frame was copied.

* fix(display): the client's HDR setting follows the session in every client mode

The bridge only ran when a variable nothing sets was present, so the client's
HDR setting and the session's never met. It now runs whenever the session
publishes an HDR state, and a client that has no such setting is asked again
only every ten seconds.

* fix(display): harden display-buffer hand-off, layer fallbacks and HDR sync

- Stop closing a buffer handle's descriptor the allocator still owns, and free an allocation whose reply could not be sent.
- Rebuild the advertised buffer formats when zero-copy is switched during a session.
- Fall back to the copy path when a layer buffer cannot be allocated, and hide the game layer when it is skipped for a frame.
- Keep a release fence that has not signalled instead of rendering into a buffer the display still reads.
- Ignore a refresh-target reset from a client that does not own the target.
- Restart the content-rate measurement after a pause, clear it when the game stops, and lengthen engagement only for a rate that was released before.
- Compare colour conversions by their values, and read padded cursor buffers at their row width.
- Use the running session's mode for the HDR and zero-copy settings, probe the display before screen effects are pushed, retry a held panel mode, and ignore callbacks after the activity is destroyed.
- Write a newer HDR value while an earlier write is settling, and reapply the value after the bridge is reinstalled.
2026-11-21 00:26:50 -05:00
Kurt Himebauch d0022a35f9 fix(session): remove the keep-top guard from other displays (#2937)
* fix(session): remove the keep-top guard from other displays

#2763 put a transparent KeepTopActivity on every other display while a
session was on top, so lmkd killing that display's home could not move focus
off the session. A/B on a 12 GB AYN Thor (Android 13) and a Retroid Pocket
Duo (Android 16) found no case where it kept a session alive: with steady
pressure the bottom home (stock launcher or Cocoon) was killed up to 400
times per run without taking focus, and a burst big enough to matter makes
lmkd kill the session at adj 0 with or without the guard.

Its side effects were real:
- Android's ActivityRecordInputSink made the bottom screen ignore touch
  (worked around in #2910 by stepping aside on touch).
- Cocoon tracks each display's top activity, so it could not suspend or
  resume DroidDeck cleanly.
- The Thor's Game Assistant gives every app with an activity on top of the
  bottom display that display's volume, so DroidDeck's audio followed the
  bottom screen's volume slider.

Removes KeepTopActivity, the focus bounce and light pause, the memory
pressure trigger and their tests. onPause runs its departure cleanup every
time again.

tools/memory_guard_ab.py gains a burst mode, reads oom_score_adj without
su (lmkd kills the root manager app and su can then open its request screen
over the game), handles Android 13 dumps, a hung stop and a session that
does not start. docs/development/memory-guard-ab.md has the Thor results.

* test(session): the guard A/B fill mode starts its counter again, and a pressure run with no completed run fails

* test(session): the burst seed is rebuilt unless it is exactly 256 MiB

* test(session): the guard A/B burst takes its last partial chunk, and only a hog run that finished counts
2026-11-20 11:40:10 -05:00
Kurt Himebauch 5051fc8b32 fix(session): the bottom screen takes touch again while a game runs (#2910)
* fix(session): the bottom screen takes touch again while a game runs

Since #2763, a transparent KeepTopActivity covers every other display while a
session is on top. Its window is NOT_TOUCHABLE, but Android gives a
translucent activity alone in its task an ActivityRecordInputSink that eats
every touch on that display (ENABLE_TOUCH_OPAQUE_ACTIVITIES, on for this
target SDK). With the dual-screen panel closed, the bottom screen's launcher,
Cocoon or any other app could not be touched until the session ended, and
the guard stayed over it after Home/PiP as well.

- The guard now takes touches itself: a touch removes it from that display.
- It comes back when the session is top-resumed again, or after 5 s if the
  session kept the top spot (the user touched the bottom screen once and
  stayed in the game).
- Stopping or entering PiP removes the guards; PiP keeps the session at adj
  50 with or without them, so they protected nothing there.

A/B on a Retroid Pocket Duo (Android 16, Cocoon as bottom home): the guard
is on top in every state it was on top on main, except the 5 s after a
bottom touch and PiP. Under lmkd pressure (kills down to adj 50, bottom
home killed 14-31 times per run) neither build lost the top spot.

* test(session): A/B tool for the keep-top guard on rooted dual screens, with Duo findings

* test(session): the guard A/B tool stops on a failed session start and cleans up an interrupted pressure run
2026-11-20 00:18:50 -05:00
Kurt Himebauch dc9d1b81cc feat(frontend): launch from every frontend file format and store, with per-store game files (#2872) 2026-11-19 22:41:04 -05:00
Kurt Himebauch d4af37937a feat(ui): Steam Deck menu icons, and Compose previews rendered to PNGs (#2900)
* Rail and second-screen icons in the Steam Deck menu's style

Solid icons throughout the rail, and Steam's glyphs where Steam has the
same place: Library is the four-square grid, Stores the price tag,
Downloads the download arrow, Settings the gear. On the second screen,
Screenshots uses Steam's Media picture and Chat its Friends people.

* Compose previews of the launcher and the in-game menu, rendered to PNGs

Debug-only previews of the launcher on each tab and the in-game menu's
pages, built from the production composables with sample state and
no-op actions, at the Duo's handheld size and in portrait.
PreviewRenderTest draws each with Robolectric's native graphics into
app/build/preview-renders/, so a UI change can be looked at without a
device, and fails on a preview that throws or draws nothing.
docs/compose-previews.md says how to run and extend them.

* Preview renders wait for store accounts before drawing

A preview case can name what the render test waits for. The Library and
Stores cases wait for store accounts, which load on a background thread,
so their PNGs never catch the loading state.

* Preview renders step the paused clock while waiting for a case to be ready
2026-11-19 19:12:10 -05:00
LunaDL 71989b4cdb Feat: Adds customizable theme and fix inner gamer theme (#2850) 2026-11-19 11:07:55 -05:00
Kurt Himebauch 1456c0529d feat(agent): launch and quit store games, list the library, and run Xbox and cloud save commands from droiddeckctl (#2860) 2026-11-19 11:04:34 -05:00
MaxsTechReview c2adf3b3dd feat(performance): switch the GPU top clock hold from the in-game menu (#2882) 2026-11-19 07:33:20 -05:00
MaxsTechReview f2d8e9e837 perf(storage): answer repeated SD library checks from the directory cache (#2881) 2026-11-19 07:33:17 -05:00
MaxsTechReview adf13d0bdd feat(session): manage memory automatically and remove the manual memory controls (#2853)
Memory in the Steam session is kept above a floor by a monitor instead of the zRAM, RAM cap and VRAM cap settings, which are removed.
2026-11-18 21:58:57 -05:00
Kurt HimebauchandTimmyCraft a5d8abeab4 feat(xbox): install legacy EAppx titles through Windows Update (on main) (#2825)
* feat(xbox): install legacy EAppx titles through Windows Update

A legacy Store title does not ship as MSIXVC. It ships as an encrypted
EAppx bundle, which streaming rejects, so the store could list the game
and never install it.

Accept EAPPX and EAPPXBUNDLE beside MSIXVC, carry the format through the
catalogue, the install record and the cached library, and dispatch
legacy-install for those formats.

Two backend patches do the work:

- droiddeck-legacy-packages.patch lets the plan, license and extract
  verbs handle a legacy package, and expands a bundle in place (nesting
  bounded at three), decrypting each inner EAppx with the same keys.
- droiddeck-legacy-install.patch adds legacy-install: resolve,
  license, download, extract, hoist AppxManifest.xml to the game root.
  Resolution asks the Xbox content service first and Windows Update
  second, because some legacy products return no files from the content
  service at all. The WU endpoint needs no Xbox credential but chains to
  Microsoft's ECC Product Root CA 2018, which Android's CA bundle does
  not carry, so that one public root is pinned for those requests.

The manifest reader accepts AppxManifest.xml as well as
MicrosoftGame.config, since a legacy package carries only the former.

Running it against a real title exposed four things that only show up at
full size:

- A licence names a key by its 16-byte content id, while a bundle header
  names it as a (content id, package id) pair. Reading the 16-byte id
  yields a different pair, so a complete key file reported every key
  missing and no bundle could be opened. Keys are now aligned against
  the header's own ids before the header is judged.
- Windows Update answers with several updates whose PackageContentId
  differs from the bundle's own. Licensing used to take the first and
  fail with content-http 400; every candidate is now tried in order,
  preferring the one the container is named after.
- A container already in .xodus-container is reused rather than fetched
  again, so a failed run does not cost another download of tens of
  gigabytes. The space preflight no longer counts a container twice for
  the same reason.
- A bundle that carries add-on packages unpacks each into its own
  folder, leaving the manifest one level down. Hoisting lifts the
  largest folder that holds a manifest, so the game still lands at the
  root beside its add-ons.

Unpacking now reports bytes written, so the install bubble fills while a
package is decrypted instead of holding a single unchanging word.

* fix(xbox): unpack a legacy package across cores and report the bytes

Unpacking one title ran as a single thread on a saturated core at about
40 MB/s. Files sit at independent offsets, so each worker now opens its own
handle and takes every Nth file, with a 1 MiB read buffer in place of the
8 KiB default that turned one 64 KiB block into eight reads. Measured on the
Forza Horizon 4 bundle, writes went from 40 MB/s to about 200 MB/s.

Two things the first full-size run exposed:

- The container was deleted only after the whole nested tree was unpacked,
  so a title that holds its package as one member held the archive and the
  decrypted copy at once. On this device that runs out of space partway
  through the second stage. The container is now deleted once its members
  are on disk, which frees the archive before they are decrypted.
- A bundle member is written as a single file, so a counter that advances
  when a file finishes stays at zero for the whole of the longest stage.
  The reported figure now also follows the growth of the destination while
  that is the case, and never moves backwards when the container is freed.

Progress is exact during the per-file stage: each file's declared length is
added as it lands, instead of walking the whole destination every tick.

* docs(xbox): record the completed legacy install

The evidence section said a finished legacy install and its decrypted
contents were unverified, because the first run was still unpacking when it
was written. That install has now completed on the same device: the
85,219,173,025-byte container produced 79.3 GB at the game root with
AppxManifest.xml and the package DLLs directly beneath it, and the launcher
lists the title as installed.

It also records what unpacking costs, since that decided the change: one
thread held a core at 100% for about 40 MB/s and four reach about 200 MB/s,
and releasing each container once its members are on disk is what keeps the
peak footprint at one package rather than the archive plus its contents.

The launch is not part of this evidence, and the entry says so.

* fix(xbox): place the 64-bit framework beside a legacy title

A Windows Update framework category lists one package per architecture under
identifier-only names. The first package was unpacked, which on this device was
the x86 build, so a 64-bit title got 32-bit DLLs and every load failed with
STATUS_INVALID_IMAGE_FORMAT. Candidates are unpacked now and only the one whose
manifest declares ProcessorArchitecture="x64" is kept.

The framework folder was also never created, so a finished download failed at the
move with "no such file or directory".

unzip.rs belongs to this patch: legacy-install calls it and the recipe left it out,
so a rebuild from the pinned source could not compile.

* feat(xbox): report a UWP entry point at launch

An unpacked package can name a COM class as its entry point instead of
Windows.FullTrustApplication. That class is a UWP application, which expects the
app model to activate a view; Wine has no host for it, so the launch died inside
the loader with no explanation. The launch now reads the entry point and reports
uwp-entry-point, and full-trust packages are unaffected.

Forza Horizon 4 is such a package: its manifest names Forza.App. Its frameworks
are installed and the loader is clean before that point.

* fix(xbox): report why a launch was refused

A failed prepare replaced the backend message with a fixed sign-in hint, so a title
that was not installed or a runtime that refused all read as a bad account. The
reason is kept, with paths and URLs dropped, and written to the store log.

* fix(adb): dismiss the keyboard on Search and Go

Search and Go were terminal IME actions but were not handled, so focus stayed in
the field and the keyboard covered the results it had just fetched.

* fix(xbox): keep a cache row without a legacy format plain

Decoding added a format key with an empty value to every cached title, so a
library restored from storage no longer matched the one that was saved.

* test(ui): match the manifest message a legacy package reports

The message covers both a MicrosoftGame.config and an AppxManifest, so the
assertion follows the text the content dialog now prints.

* fix(xbox): refuse to start a title that needs the Windows app model

A legacy package that names an entry point other than
Windows.FullTrustApplication is a UWP application. Wine has no app-model
host, so starting its executable crashes inside the loader and the launch
looks like nothing happened. Read the entry point from the manifest the
installer already parses and stop the Play action with a message instead.

Forza Horizon 4 names Forza.App, so it installs and reports as installed
but cannot be started here yet.

* fix(xbox): dispatch on the container format of the chosen package

The catalogue records the format of the first installable desktop package, and
the picker only replaced the content id. An offer that lists MSIXVC and a legacy
container would then hand the legacy id to streaming, or the streamed id to
legacy-install, and the install failed after resolution had succeeded.

The choice now carries its own format and the catalogue value only fills a gap.

* fix(xbox): keep an extraction reason that the sanitizer rewrote

The extraction sanitizer replaces anything outside letters, digits, space, dot,
underscore and dash with a question mark, so a reason such as "(os error 28)"
arrived as "?os error 28?" and the allowlist dropped the line. The failure then
showed only the stage code, with no cause.

Add that replacement character to the class the allowlist accepts.

* fix(xbox): print the reason a launch was refused

The account channel sends a reason with a refusal, and the guest replaced it
with a fixed sign-in message, so a title that was never installed still read as
a bad account. The guest now shows the reason it was given, and a token holding
a path is dropped whole instead of having its slashes removed and its directory
names kept.

* build(xbox): leave RUST_TEST_THREADS unset when the host has no value

The recipe always passed the variable, empty when the host had none, and the
pinned test harness rejects an empty count. On an ARM64 host that runs cargo
test, so the default local build failed before compiling.

* fix(xbox): rebuild the backend patches from the tree that ran

The two patches in this branch were not the ones the verified install ran, and
one of them did not compile. `unzip.rs` inflates deflated entries but the
dependency that provides the inflater was never added, so `prepare.py` produced
a tree that failed at `flate2::read::DeflateDecoder`. Anything else missing fell
into the same gap: the install stage reported no bytes, so the bar held one
value for the whole unpack, and a container a stopped run had finished was
downloaded again.

Rebuilt from the patched source, and fixed the defects a review of the patch
found:

- Unpacking reports bytes again: the workers count each file's declared length,
  and for the single-file bundle member the folder's growth stands in, which is
  what the device run showed.
- A finished container is reused, so a retry after a failure past the download
  does not spend hours fetching it again. The space preflight counts it as
  reclaimable, since the retry truncates it first.
- An install over a folder that already has a manifest replaces the old files
  instead of leaving the new package nested and reporting success. A first
  install still refuses to merge into an existing target.
- The manifest search looks at the depth a nested bundle writes, not only one
  level down.
- `withdraw_libraries` removes only the DLLs `copy_libraries` recorded copying,
  so a framework replacement cannot delete a library the title owns.
- ZIP64 sizes and offsets stay `u64`; truncating them to `u32` read the wrong
  local header past 4 GiB.
- The extraction checks the blockmap length against the footer's before writing,
  which the crate only does when asked.
- The container being unpacked is never treated as a nested member, so
  `extract-eappx title.eappx .` no longer re-enters and deletes its own input.
- `flate2` is declared and the lock is updated.

`prepare.py` reproduces this from a pristine checkout and `cargo test` passes on
it.

* fix(xbox): apply the legacy install patch over the Nexus 0.2.15 backend

* fix(xbox): install only the newest x64 build of a legacy title and size the space check at its real peak

* fix(xbox): install a store package that is a plain archive instead of an XVD

* fix(xbox): refuse a package entry that ends before its recorded size

* fix(xbox): credit only complete staged containers toward the free space a legacy install needs

* fix(xbox): bound each package entry to its data and check ZIP64 decoded sizes

* fix(xbox): refuse duplicate package names and clear an unfinished download before measuring space

* fix(xbox): bound package entries by the next header and stage a plain package until it validates

* fix(xbox): hold the install folder lock through a legacy install

* fix(xbox): fall back to an older build when Microsoft refuses the newest one a license

* fix(xbox): keep the registered device across sign-out

* feat(xbox): explain device-limit and license refusals, with a link to manage devices

* fix(xbox): locate each build only once licensed, roll back a failed package swap, report the final license answer

* fix(xbox): skip trial and preorder packages, read runtime behavior, keep licensing timeouts

* fix(xbox): keep a failed package swap recoverable, size bundles up front, report key-write and framework errors cleanly

* fix(xbox): drop a pending manifest check on any newer launch, keep committed backups out of restores, match the app-model order

* fix(xbox): cancel pending launch checks on a new intent, remember entries a rollback could not remove

* fix(xbox): clear the removal list before a restore moves old files back

---------

Co-authored-by: TimmyCraft <46533729+TimmyTurner51@users.noreply.github.com>
2026-11-18 14:14:26 -05:00
Kurt Himebauch eabcfc7b74 chore: consistent code branding (#2800)
* chore: consistent code branding

* fix: carry legacy overrides, queues and live sync rows across the rename

* fix: keep queued legacy overrides on a failed rename and separate merged queue entries
2026-11-17 23:31:26 -05:00
Kurt Himebauch 0ce168b913 feat(settings): one home per setting, Storage/Syncthing/Downloads tabs, scoped frame limit, clearer menus (#2791) 2026-11-17 20:26:37 -05:00
MaxsTechReview 7ce8b37824 fix(zram): back off ineffective idle compression (#2347) 2026-11-17 16:20:32 -05:00
Kurt Himebauch d7d0583c5a fix(memory): reclaim on a fast memory fall on large-RAM devices before the kill (#2754) 2026-11-17 13:37:09 -05:00
MaxsTechReviewandKurt Himebauch b88b5f6b1d feat(steam): adopt game folders found in added libraries (#2317)
* feat: adopt game folders in added Steam libraries

* Share the appmanifest builder between steam-library and steam-games

* steam: load the shared compatibility module once per run

* Guard unreadable game folders during library adoption

---------

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-11-17 11:25:04 -05:00
MaxsTechReview 8c8cae85cf fix(session): read the compressed client back when it is in front of a running game (#2600)
* fix(session): read the compressed client back when it is in front of a running game

* fix(session): keep the client compressed while focus is unknown

A missing or unreadable focus.json no longer counts as the client in front
of the game, so the readback timer starts only on a confirmed focus change.

* fix(session): invalidate focus snapshots after collection failures

* fix(session): retry focus snapshot publication
2026-11-17 11:20:29 -05:00
MaxsTechReview d7c03ba3ec revert: remove merged bot investigation docs (#2692, #2697) (#2784)
* Revert "docs(rendering): record outdoor lighting investigation (#2692)"

This reverts commit cdb8fa6f53.

* Revert "docs(rendering): record D3D10 renderer crash investigation (#2697)"

This reverts commit 663a7003bc.
2026-11-17 11:12:11 -05:00
MaxsTechReview cdb8fa6f53 docs(rendering): record outdoor lighting investigation (#2692) 2026-11-17 11:09:22 -05:00
MaxsTechReview 663a7003bc docs(rendering): record D3D10 renderer crash investigation (#2697) 2026-11-17 11:09:17 -05:00
ASEbrahimandASEbrahim 37a816c212 Update MaliBridge to v0.5.5.4 (#2704)
Co-authored-by: ASEbrahim <264076441+ASEbrahim@users.noreply.github.com>
2026-11-16 11:34:58 -05:00
Kurt Himebauch b6391ed8c0 feat(agent): shipped rules and skills for every harness, with a user layer and tool health (#2682) 2026-11-15 16:40:45 -05:00
Kurt Himebauch 03812bb3b7 feat(boot-movie): add a Shuffle switch backed by Steam's startup movie shuffle setting (#2462)
* feat(boot-movie): add a Shuffle switch backed by Steam's startup movie shuffle setting

* test(boot-movie): keep unrelated settings unchanged

* fix(boot-movie): keep the Shuffle choice across reset, unreadable configs and running sessions

* fix(boot-movie): track the Shuffle baseline per Steam home and only for values staging wrote

* fix(boot-movie): adopt a Shuffle change made in the inactive Steam home before staging overwrites it

* fix(boot-movie): keep the 60 fps note under the Installed movies row
2026-11-15 11:05:39 -05:00
MaxsTechReviewandKurt Himebauch 2e64ae7575 feat(performance): switch to turn off idle game memory compression (#2346)
* feat(performance): add idle zram compression toggle

* Gate the idle compression toggle on memory cap support and refresh counters first

* fix(zram): retain launcher reclaim when idle compression is off

* test(memory): verify launcher-only reclaim signals

* fix(performance): keep game reclaim when focus is unknown

* fix(performance): say when to turn idle compression off and that it applies on the next session

---------

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-11-15 10:09:38 -05:00
alien2003andalien2003 decab6ea90 feat(input): a pen moves the pointer while hovering, clicks with its tip and right-clicks with its side button (#2625)
* feat(compositor): pen samples drive the pointer like a mouse

Input record 13 carries the pen's state (in proximity, tip, right and
middle button) and its position in input space as 24.8 fixed point.
Hover moves the pointer, the tip holds the left button, and a record
without the in-proximity bit releases every button. Under a pointer
lock only the buttons pass. A button pressed or released mid-stroke
keeps the implicit grab on the window the stroke started in, unless
that window closed.

* feat(input): a pen moves the pointer while hovering, clicks with its tip and right-clicks with its side button

In Mouse mode (the default) a pen's hover moves the pointer, the tip
holds the left button and the side button right-clicks; Touch keeps it a
finger. The side button can send a middle click or nothing instead, and
a Bluetooth pen key counts as the side button while the pen is near.
With glasses or a program's pointer lock the pen drives the touchpad.
A hover exit followed within 50 ms by more hover or a touch keeps the
pen near, so a pen at the edge of its hover range does not flicker out,
and a hover that sends nothing for 2 s leaves proximity. On the desktop
a pen that comes near releases KWin's grab of a hardware mouse, so the
pen moves KWin's pointer. Whatever cancels touches also ends the pen,
and stylus devices no longer count as hardware mice.

* feat(input): pen mode and side button settings in the Controls tab and the session drawer

A Pen group follows the touch settings once the phone has a stylus
device or a pen event was seen, which is remembered as penSeen and kept
by a settings reset. It holds Pen (Mouse, Touch) and Side button (Right
click, Middle click, Off); Side button is hidden in Touch. Before
Android 14 a touchscreen reports the stylus source without a pen, so
there it counts only with its first pen event. The strings are
translated into all 32 languages.

* docs: describe pen input and its limits

---------

Co-authored-by: alien2003 <11610652+alien2003@users.noreply.github.com>
2026-11-15 09:38:01 -05:00
alien2003andalien2003 de70e37f30 feat(ctl): input pen draws with a virtual pen through Android's input reader (#2639)
droiddeckctl input pen hover, tap, stroke and button register a virtual
direct pen with `adb shell uinput -` and play the gesture through it, so
Android's input reader makes the same stylus events a built-in pen does,
with pressure, tilt, distance, the eraser and both side buttons. The app
is not involved, which lets pen handling be tested without a pen.
Positions are fractions of the screen as shown, placed inside the
physical frame of the internal display viewport in dumpsys input: the
frame is smaller than the panel when `wm size` sets another aspect
ratio, and Android drops pen events outside it. The rotation and size
come from the same viewport. The values are checked before anything
runs on the device.

The script waits 1 s after registering, since uinput reads it in one go
and cannot wait for the device, and does not reset uinput's time base
after that, which would drop the first samples. Contact sends a pressure
of at least 1, because Android takes a pen at pressure 0 for a hovering
one, and a lift first moves to where it lifts, because Android's UP
repeats the last contact. A pen held still moves by one unit without
leaving the physical frame so that it keeps reporting, since the kernel
drops frames that change nothing.

Co-authored-by: alien2003 <11610652+alien2003@users.noreply.github.com>
2026-11-15 09:37:56 -05:00
Mike Haye 33cd43237e Head tracking for the XREAL One, One Pro, One Pro+ and Aura (#2532)
* Head tracking for the XREAL One, One Pro, One Pro+ and Aura

These glasses use the same USB Ethernet link and 128-byte IMU report as the
1S. XrealModel now has one model per product: the 1S keeps its tested
display-mode control, and the others switch 2D and 3D only with GET_INPUT
(0x2821) and SET_INPUT (0x2822). Display-mode set (0x275f), brightness and
the dimmer are never sent to them. The Aura's IMU reads x right, y up, z back
(about +9.8 m/s2 on y at rest), so its axes are not flipped like the rest of
the family. Recovery-mode product ids (one below each) stay excluded.

Signed-off-by: Mike Haye <84657517+mhaye20@users.noreply.github.com>

* Describe the wider XREAL support in the glasses panel and docs

The panel's help text and docs/smart-glasses-support.md named only the 1S.
They now list the One, One Pro, One Pro+ and Aura, say what was tested on
the Aura (head tracking and 2D/3D switching), and note that these models get
2D and SBS only, without brightness, dimming or display-mode set commands.
Translations still describe the 1S only.

Signed-off-by: Mike Haye <84657517+mhaye20@users.noreply.github.com>

* Docs: XREAL support is no longer 1S only

The paragraph under the support matrix still said the One and One Pro were excluded.

Signed-off-by: Mike Haye <84657517+mhaye20@users.noreply.github.com>

---------

Signed-off-by: Mike Haye <84657517+mhaye20@users.noreply.github.com>
2026-11-15 09:37:51 -05:00
MaxsTechReview 4527e93118 docs(phantom): how Android counts guest processes and why detaching cannot escape it (#2584)
* docs(phantom): how Android counts guest processes and why detaching cannot escape it

* docs(phantom): clarify probe permissions and batch capture

* docs(phantom): qualify probe precondition by SDK and size the limit device-wide

* docs(phantom): keep phantom discovery on for the 12L probe and raise the limit instead

* docs(phantom): warn about the CPU kill, raise the limit before the flag and restore both after the probe

* docs(phantom): restore the monitor flag before the phantom limit after the probe

* docs(phantom): restore the flag before the limit whether each is put or deleted
2026-11-15 09:37:34 -05:00
MaxsTechReview a7032530da fix(stores): log why a GOG cloud sync failed and stage uploads in the cache folder (#2596)
* fix(stores): log why a GOG cloud sync failed and stage uploads in the cache folder

* fix(stores): strip URL credentials and bound the error body in GOG cloud failure details

* fix(stores): send Galaxy's communication-service User-Agent to GOG cloud storage

GOG cloud storage now answers every list with HTTP 400 invalid_version for the bare
"GOG Galaxy" value, so uploads and downloads failed for every game. List, HEAD, GET and
PUT now identify as GOGGalaxyCommunicationService/2.0.13.27 like gogdl and Lutris, and
PUT carries the same value as X-Object-Meta-User-Agent.

* fix(stores): bound cloud list errors and verify test requests

* fix(stores): preserve cloud error classification
2026-11-15 09:02:53 -05:00
MaxsTechReview 7254a88391 fix(game-env): turn off Proton's tabtip unless the Steam keyboard is enabled (#2595)
* fix(game-env): turn off Proton's tabtip unless the Steam keyboard is enabled

Proton's tabtip only opens Steam's keyboard with SteamDeck=1, but it always
runs UI Automation queries inside the focused game, and those calls crash
games that answer them (Godot 4.5 AccessKit). Game launches now add
tabtip.exe=d unless SteamDeck=1 or the user's overrides name tabtip.

* fix(game-env): match WINEDLLOVERRIDES modules split by spaces and tabs

* fix(game-env): count only tabtip.exe entries with a load order as the user's own setting

* fix(game-env): count *tabtip.exe and tabtip.exe.dll overrides as the user's own setting

* test(game-env): cover keyboard overrides during sync fallback
2026-11-15 02:48:50 -05:00
MaxsTechReview 99bf382ae8 fix(venus): DXVK runs on Mali GPUs without dual-source blending (#2293)
* fix(venus): DXVK runs on Mali GPUs without dual-source blending

DXVK requires dualSrcBlend for D3D11 and skips any GPU without it, so on
Mali through Venus no adapter was found. The Mali compatibility layer now
reports the feature and maxFragmentDualSrcAttachments 1, keeps it out of
the driver's device, turns fragment outputs decorated Index 1 into Private
variables (shader modules and inline stage code), and maps SRC1 blend
factors to source alpha in pipelines and vkCmdSetColorBlendEquationEXT.
Only active when the driver lacks the feature.

Adds a mock loader and driver test for the layer, and fetches the
layer's pinned headers for it in CI.

* build(venus): pin the Mali component with dual-source blending
2026-11-14 18:27:35 -05:00
TapuukandTapuuk 2cb51103ac fix(game-env): the VRAM cap also caps the shared memory DXGI reports (#2607)
With a single GPU heap DXVK reports the whole heap as shared memory too, so games still saw ~8 GB as shared even with the cap on. Set dxgi.maxSharedMemory to the same value, like BattleNet already does.

Co-authored-by: Tapuuk <177422350+Tapuuk@users.noreply.github.com>
2026-11-14 14:50:12 -05:00
MaxsTechReview 30d103280b fix(session): games keep OpenGL error checks when the client skips them (#2562)
* fix(session): games keep OpenGL error checks when the client skips them

* docs(session): separate the GL error checks note from the picker paragraph
2026-11-13 20:57:42 -05:00
FX1922 d33f4b4896 feat: Add Soundtracks tab and music player (#2389) 2026-11-13 08:49:48 -05:00
MaxsTechReview f33181e430 fix(proot): fchdir takes the open directory's path instead of walking it again (#2553)
* fix(proot): fchdir takes the open directory's path instead of walking it again

* fix(proot): fchdir keeps trailing-period names and rechecks the binding's parent

The descriptor path now carries the same final marker the walk produced, so a directory whose name ends with a period is not truncated. The parent of the matching binding is resolved again, so a binding whose ancestor was replaced by a symlink takes the full walk as before. The check script gains a trailing-period directory.

* fix(proot): fchdir requires the binding's parent to be a directory
2026-11-13 00:55:18 -05:00
Kurt Himebauch d63193393d feat(ui): agent features start off and live in Setup > Developer (#2550) 2026-11-12 21:36:32 -05:00
Kurt Himebauch a1dfb96708 fix(steam): share the Steam app's prefix with shortcuts of the same install (#2463)
* fix(steam): share the Steam app's prefix with shortcuts of the same install

* fix(steam): prefer the matching install's save prefix

* fix(steam): tolerate an unreadable library when linking a shortcut prefix

A library folder that cannot be listed made the shortcut writer exit, so no added game was registered.

* fix(steam): repair a dangling shortcut prefix link and keep Steam library installs to their own prefix

* fix(steam): only change shortcut prefix links the importer created

* fix(steam): record a prefix link only when the importer created it
2026-11-12 12:11:45 -05:00
MaxsTechReview a8237e8927 fix(memory): reclaim idle session memory under pressure (#2382) 2026-11-12 07:38:28 -05:00
KeegantheVeganat0r b303423001 fix(lab): reuse installed add-on packs so the Agent can restart (#2512) 2026-11-12 00:02:26 -05:00
KeegantheVeganat0r 2953739f1e fix(lab): target the active app package and repair build setup (#2494)
* fix(lab): handle SDK licenses and cache Gradle planning

* fix(lab): target the package owning the agent session

* fix(lab): preserve package overrides across build handoff
2026-11-11 20:55:33 -05:00
MaxsTechReview ea48036811 fix(game-env): the VRAM cap also applies to D3D9 games (#2372)
* fix(game-env): the VRAM cap also applies to D3D9 games

DXVK's D3D9 frontend ignores dxgi.maxDeviceMemory, so set d3d9.maxAvailableMemory to the same cap.

* fix(vram): leave DXVK's lower per-game D3D9 limits in place above the 4096 MiB default
2026-11-11 20:55:30 -05:00
Kurt Himebauch 61031e3c4b feat(lab): build and run Lab builds of DroidDeck on the device itself (#2375)
* feat(lab): load an on-device Lab build over the installed app

* feat(lab): build Lab builds on the device and report the APK commit to agents

* fix(lab): dd-agent connects loopback adb before starting Claude Code

* feat(lab): tell the app's own agent to continue after a Lab build restart

* fix(lab): size the build heap from the device's memory

* feat(lab): keep earlier Lab builds and list them in Updates

* feat(lab): notify when DroidDeck comes back on a Lab build or turns one off

* feat(lab): estimate the time left and compile the installed commit ahead of the first build

* fix(lab): report a failed command as a failed build and update progress every five seconds

* feat(lab): a kept build for another version can be rebuilt

* feat(lab): record which installed commit the build caches are warm for

* fix(lab): the app's agent hands its builds to the app, so they outlive the agent's turn

* perf(lab): BuildConfig describes the installed base, so a Lab commit does not change it

* perf(lab): compile with the Kotlin daemon, since in-process Kotlin compiles always redo the whole app

* fix(lab): a build whose last task was up to date no longer counts as failed

* feat(lab): dd-lab-build --explain logs why tasks ran and Kotlin's build report

* fix(lab): keep a waiting build when another is staged or Lab is turned off, and never restart during a session

* fix(lab): keep the installed build's label and exact commit, and refuse AppLanguage changes

* fix(lab): setup verifies its downloads and waits for adb before preparing

* fix(agent): quote apostrophes in opened URLs and keep the sign-in pid
2026-11-11 12:44:39 -05:00
K11MCH1andKurt Himebauch f16b023f0d fix(ubisoft): R2 games get a session matching the subsystems they ask for (#2450)
uplay_r2.dll speaks the same UplayDll.proto as uplay_r1.dll, but its InitReq
names the subsystems the game uses (fields 4 to 11) and its ApiContext only
creates objects for those. It copies gameInstall and storage into their
objects without checking for them, so the gameInstall droiddeck-upc always
sent crashed Prince of Persia: The Lost Crown (6145), which asks for overlay,
product and store only: an access violation reading 0x68 in
uplay_r264.dll+0xaca2 two seconds after the session.

- When the request names subsystems, gameInstall (14) is sent only with
  subSystemInstall and storage (17) only with subSystemStorage, and an empty
  multiplayerInit (20) is added. Requests that name none keep the old session.
- streamingReq (27) is answered: the streaming type is None, other streaming
  queries are not found.
- The log records the subsystems each init asked for.

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
2026-11-11 10:34:06 -05:00
K11MCH1 b1a410ccd2 fix(ubisoft): answer Orbit, login and process-only check-ins (#2460) 2026-11-11 07:49:18 -05:00
Kurt Himebauch 3c96df4ab1 feat(ubisoft): Ubisoft Connect store with native sign-in, library, downloads and launch (#2322)
* feat(ubisoft): sign in to Ubisoft Connect and list the owned library

* feat(ubisoft): download games natively through Demux and Ubisoft's CDN

* fix(ubisoft): show the owned games on the store page

* fix(ctl): reach the agent bridge by broadcast when the shell has no content command

* feat(ubisoft): run Ubisoft games in one prefix with Ubisoft Connect installed and the game registered

* feat(ubisoft): launch games through a native stand-in for Ubisoft Connect's local service

* feat(ubisoft): document the launcher pipes, log why owned games have no download, drop the installer after extraction

* feat(ubisoft): Steam-owned Ubisoft games install through Steam, and the launch session carries the game's application id

* feat(ubisoft): answer Denuvo activations through Ubisoft's activation service and log unanswered pipe traffic

* feat(ubisoft): report installed chunks to the game and skip add-ons the account does not own

* fix(ubisoft): the overlay stays off, Ubisoft's install steps pick Windows components, and shared-prefix games keep their own settings

* fix(ubisoft): write the manifest's registry values, and pick the game's exe over Ubisoft's installer stubs

* fix(ubisoft): stream download slices, guard the launch hook, and keep per-game components in the shared prefix

* fix(ubisoft): direct launches in the shared prefix keep their own game id

* ci(ubisoft): build the launcher service after the prepared components are verified

* fix(ubisoft): verify reused files, drop syncs from a signed-out account, and clear activation requests before launch

* fix(ubisoft): fetch again a reused file whose slices cannot be checked
2026-11-10 15:08:37 -05:00
Kurt Himebauch d8ed02f2cf feat: EA store with sign-in, library, native downloads, updates and launch without the EA app (#2259)
* docs: research and plan for EA and Ubisoft stores

* feat(ea): EA store with sign-in, library, native downloads, updates and launch without the EA app

* perf(ea): fetch large archive records as parallel ranges

* fix(ea): register game display names

* fix(ea): license legacy EA Core games and harden the LSX endpoint

* fix(ea): run legacy Origin SDK games with a stand-in Origin process

* fix(ea): trust only the prepared game on LSX and stop stale library syncs

* fix(ea): close LSX sessions on stop and drop clients that never hand-shake

* fix(ea): require every hashed field before licensing or caching a probe

* fix(ea): trust one LSX session per launch

* fix(ea): serialize the library cache write with sign-out and rerun a skipped sync

* fix(ea): hand off library sync requests under one lock

* fix(ea): clear the sign-in before invalidating the library

* fix(ea): serialize sign-out with token refresh and with the library cache

* fix(ea): LSX trusts only verified peers, new launch closes old sessions, exit stops its own game

* fix(ea): LSX hides profile and presence from unverified peers

* fix(ea): LSX handshake has a fixed deadline and untrusted sessions yield their slot

* fix(ea): LSX never registers a client after its listener was stopped

* fix(ea): LSX evicts each untrusted session at most once

* fix(ea): LSX admission and eviction share one lock and keep the cap

* fix(ea): LSX trust promotion excludes eviction

* fix(ea): LSX launch generation guards restarts and drops results after shutdown

* fix(ea): LSX publishes launch state under the admission lock and tags accepts by generation

* fix(ea): LSX restarts rebind its listener and promotion checks the launch generation

* fix(ea): record why EA refuses a game licence in the store log

* chore(ea): log owned offers and the full licence refusal

* chore(ea): log the account's entitlements when no game licence is granted

* chore(ea): log legacy entitlements when no game licence is granted

* chore(ea): log only the refused game's own entitlements

* fix(ea): skip trial launchers flagged 1 and license games whose LSX peer Android cannot name
2026-11-10 14:56:29 -05:00
Kurt Himebauch aa1984bb94 docs: DroidDeck 0.7.1 release notes (#2399)
* docs: DroidDeck 0.7.1 release notes

* docs: add #2392 to 0.7.1 notes
2026-11-10 07:21:03 -05:00
MaxsTechReview 6b110581ac fix(gog): install scripts' support files reach the prefix (#2294)
* fix(gog): install scripts' support files reach the prefix

A goggame-<id>.script can copy files into the prefix with supportData
actions: default INI files, Plugins.txt and other settings that mods such
as one-click editions need. Only setRegistry actions were applied, so
those games started without their configuration and ran as the base game.

droiddeck-store-launch now applies supportData after the registry, once
per script revision: copies from {app} and {supportDir} into {userdocs}
and {localappdata}, matching paths without regard to case. Links are
copied as links, paths outside those folders are refused, and existing
files are replaced only when the action asks for it.

* Keep GOG support data copies inside the game and prefix folders

* Copy linked GOG support sources as links and keep a player's own links
2026-11-08 18:45:53 -05:00
Kurt Himebauchandmaxjivi05 b7b96875a1 docs: DroidDeck 0.7.0 release notes (#2170)
* docs: DroidDeck 0.7.0 release notes

* docs: add 0.7.0 release note media

* docs: drop the 30 second summary from the 0.7.0 notes

* docs: add the dual-screen Dashboard shots to the 0.7.0 notes

* docs: show the Dashboard as one stacked dual-screen image

* docs: add the swap screens GIF to the 0.7.0 notes

* docs: swap in the new Syncthing screenshot

* docs: add the HUD dock GIF to the 0.7.0 notes

* docs: add the Game Jolt screenshot to the 0.7.0 notes

* docs: show the full screen in the HUD dock GIF

* docs: merge the GPU bullets, add the no proprietary components line, put images above their bullets

* docs: add the 0.7.0 APK download button to the release notes

* docs: add the first-time contributors to the 0.7.0 notes

* docs: add KeegantheVeganat0r as a first-time contributor

* docs: add the shared Steam libraries screenshot to the 0.7.0 notes

* docs: rewrite the shared Steam libraries bullet and move it up

* docs: add the Mali support photo to the 0.7.0 notes

* docs: center 0.7.0 release media

* docs: credit The412Banner for Mali support in 0.7.0 notes

* docs: add the KDE desktop GIF to the 0.7.0 notes

* docs: add the desktop and swapped game clips to the 0.7.0 notes

* docs: use the Duo photo for the swapped screens

* docs: replace the swap screens GIF with the Duo recording

* docs: drop the swap screens GIF

* docs: keep a blank line before each release image

* docs: tweak 0.7.0 release notes

* docs: move smaller 0.7.0 items to improvements

* docs: fold the bottom-screen HUD into the Strip HUD bullet

* docs: pair the swap screens and KDE desktop media

* docs: move Game Jolt and Syncthing up in 0.7.0 features

* docs: put the swap screens and KDE desktop cluster after Mali in 0.7.0 features

* docs: reword shared Steam libraries and reorder KDE desktop bullet

* docs: add recent merged PRs to the 0.7.0 notes

* docs: auto component updates follow DroidDeck-Proton only

* docs: add input profiles, low-RAM memory, driver Auto and other recent changes to the 0.7.0 notes

* docs: add the second-screen layout editor to the 0.7.0 controller profiles notes

* docs: refresh the 0.7.0 pull request and contributor counts, mention controller profiles in the summary

* docs: 0.7.0 notes add the latest fixes and the DroidDeck-Proton, DD-Turnip and component changes

Adds the user-visible pull requests merged after the last refresh (Library
sort, runtime pack update, desktop app launches, GitHub AppImage variant,
DroidDeck-Proton default, component auto-update cleanup, UBWC and FEX preset
settings, controller navigation) and a section for what shipped in
DroidDeck-Proton 11-11.10 to 11-12.3, DD-Turnip 0.4.0 and DroidDeck-Components
since 0.6.9.

---------

Co-authored-by: maxjivi05 <maxjividen@gmail.com>
2026-11-08 09:32:48 -05:00
MaxsTechReview d74575ed7f fix(components): DXVK Auto on Adreno 6xx keeps DroidDeck-Proton on DXVK-gplasync 2.7.1 (#2226)
* fix(components): DXVK Auto on Adreno 6xx keeps DroidDeck-Proton on DXVK-gplasync 2.7.1

* fix(components): DXVK Auto says so when the pinned DXVK could not be installed

* fix(components): a DXVK the player picked is shown as their choice, not a failed pinned install
2026-11-07 15:48:14 -05:00