Commit Graph
56 Commits
Author SHA1 Message Date
MaxsTechReview 92a7124589 fix(gpu): skip system Vulkan pruning when the runtime pack is absent (#2316)
fix: skip pruning system Vulkan runtimes when the runtime pack is not installed
2026-11-08 22:07:39 -05:00
MaxsTechReview 914b3588e1 fix(drivers): leaving a driver bundle no longer keeps its runtime half, and the Auto display picks the latest pair (#2255)
* fix(drivers): leaving a driver bundle's display half also drops its runtime half

Picking either half of an Android + Linux bundle selects both, but picking
another display driver afterwards changed only the display. The session
kept loading the bundle's Linux driver, so switching back to DroidDeck's
drivers could still leave the session failing to start. The runtime driver
now goes back to the default when the display leaves the active bundle; a
runtime driver chosen on its own is kept.

* fix(drivers): picking the Auto display hands both halves to Auto's latest DD-Turnip pair

* fix(drivers): the Auto display pick puts the display on Auto even when no pair fits the GPU
2026-11-07 21:47:04 -05:00
MaxsTechReview e4d4096342 fix(drivers): a driver repo that fails to answer no longer changes the Auto pick (#2233)
* fix(drivers): a driver repo that fails to answer no longer changes the Auto pick

The release check reads every driver repo and saved the list even when one
of them failed, so that repo's drivers vanished until the next good check.
When GitHub rate-limited or dropped the DroidDeck driver repo, Auto on an
Adreno 6xx saw no DD-Turnip release, switched to Banner's Turnip, and then
switched back after the next clean check.

A repo that fails now keeps its releases from the last good check, while
still being recorded as failed. A repo that answers and no longer lists a
driver still drops it.

* test(drivers): carry-over is checked through refresh with one repo failing

* fix(drivers): drop a repo's partial results when its answer fails and keep the refresh test offline
2026-11-07 15:48:09 -05:00
MaxsTechReview ca6c409436 fix(drivers): built-in Auto picks match the published table on Adreno 6xx and 8xx (#2151) 2026-11-07 08:25:08 -05:00
Kurt Himebauch bf693d7f71 fix: Auto picks the upstream RADV pair on Xclipse 950 and 960 (#2158)
* fix: Auto picks the upstream RADV pair on Xclipse 950 and 960

* fix: Auto reads the Xclipse model after the Vulkan query

* fix: Auto treats an unnamed Xclipse like the 950 and 960

* fix: Auto reads any three digit Xclipse model number
2026-11-05 23:06:06 -05:00
Kurt Himebauch 4cbd7722f8 feat: the PowerVR runtime is a downloaded add-on pack, not bundled in the APK (#2157)
* feat: the PowerVR runtime is a downloaded add-on pack, not bundled in the APK

* fix: a stopped session cancels the PowerVR pack download

* fix: a session stopped during runtime unpacking ends before staging

* fix: a failed PowerVR pack download ends the session with a message
2026-11-05 22:58:10 -05:00
+1 3733c50902 feat: non-Adreno graphics stack (Venus, open driver pairs, gamescope patches) (#2029)
* Retain compositor resources when GPU completion is unconfirmed

* Stop quarantined GPU callers before retries and mapped writes

* Support Android hardware-buffer presentation over Wayland

* Support PowerVR swapchains and linear image imports in Gamescope

* Bundle verified PowerVR graphics components through existing build preparation

* Detect and select the system Vulkan backend on PowerVR

* Apply PowerVR Steam and game compatibility during normal launches

* Show PowerVR support through existing driver and component controls

* Update existing hardware guidance for system Vulkan support

* Import the shared system Vulkan readiness check

* Discover and propagate the actual PowerVR render node

* Prune obsolete PowerVR runtimes after guest processes exit

* Retain external DMA-BUF ownership after GPU quarantine

* Name the PowerVR HAL selection explicitly

* Isolate component UI tests from application startup

* Cover the inherited FEX preset in PowerVR profile tests

* Log test worker failures for CI diagnosis

* Remove temporary test logging after diagnostic CI

* Prefer system dependencies for the Android Vulkan loader

* Capture raw stderr before test worker termination

* Remove the temporary test worker crash probe

* Import pinned DXVK recipe prerequisite from PowerVR PR570

Copy only the standalone build recipe, source pin, BC-format prerequisite
and presentation-sync patch/check from wallentx/DroidDeck at d0f7264ea8.
Source: https://github.com/Droid-Deck/DroidDeck/pull/570
Preserve that proposal attribution; no Android app, compositor, managed
pack, private data or fork development history is imported.

* Add opt-in low32 GPU mapping adapter and integrity probes

* Add opt-in D3D9 single-sample workaround and fix HUD texel format

* Document verified production game workaround and publication scope

* Restrict reset diagnostics and create private output atomically

* Target official runtime review and document PR570 prerequisite provenance

* Fix runtime tool output isolation, mmap64 chaining and DST ambiguity

* Normalize swapchain backbuffers for the opt-in D3D9 single-sample path

* Experimental Samsung Xclipse support on the system Vulkan path

Detect Samsung's Vulkan HAL (vulkan.samsung.so) and its sgpu render node
alongside PowerVR, and run Xclipse through the same libhybris bridge:

- VK_LAYER_DROIDDECK_xclipse (tools/linuxfs/xclipse-layer), built with the
  glibc preloads and enabled only on Xclipse: sets bionic's environ for the
  driver's shader compiler, avoids immutable YCbCr samplers in compute
  layouts, forwards the KHR calibrated-timestamp entry points to the EXT
  ones, and reports textureCompressionBC and BC4/BC5 filtering over the
  compat layer's BC emulation.
- Upstream DXVK 2.6.2, pinned as a tar.gz component and selected on Xclipse:
  the driver has 128 bytes of push constants, DXVK 3 needs 256.
- android_wlegl accepts a zero stride and passes it through unchanged:
  Samsung's gralloc records none for GPU-only buffers.

Tested on a Galaxy A56 (Xclipse 540, driver 24.0.560): Steam Big Picture
and PICO PARK (D3D9).

* Xclipse layer: copy the device chain and track samplers per device

- Clear textureCompressionBC in a copy of the device-create chain (every
  structure up to the VkPhysicalDeviceFeatures2 that enables it) instead of
  writing the caller's structure; a chain led by a structure of unknown size
  is passed on unchanged.
- Track YCbCr samplers per device in a growable list, drop them on
  vkDestroySampler and device teardown, and fail sampler creation rather
  than leave one untracked when the list cannot grow.
- Fail descriptor set layout creation with VK_ERROR_OUT_OF_HOST_MEMORY when
  a replacement sampler array cannot be allocated, instead of passing the
  original YCbCr samplers to the driver.

* Xclipse layer: copy any device-chain structure the headers define

The chain copy that clears the emulated textureCompressionBC only knew a
handful of structure sizes, so a valid chain such as
VkPhysicalDeviceTimelineSemaphoreFeatures -> VkPhysicalDeviceFeatures2 was
passed on unchanged and the compat layer refused the bit. Size every
structure that may extend VkDeviceCreateInfo from a table generated from the
Vulkan registry (gen_device_chain.py, Vulkan-Headers 1.3.275, the headers
the build compiles with), and copy onto the heap instead of a fixed buffer.
Only a structure newer than those headers still passes the chain unchanged.

Add a regression test that runs the layer between a simulated loader and a
mock driver: the timeline-semaphore chain, pEnabledFeatures, an unknown
structure, the caller's structures left untouched, per-device YCbCr sampler
tracking with handle reuse, and the KHR calibrated-timestamp forwarding. CI
installs libvulkan-dev for it.

* Mali bridge (#517, by ASEbrahim) on the non-Adreno test branch

Squash of Droid-Deck/DroidDeck#517 (ASEbrahim/DroidDeck mali-bridge @ 6b823341): the Vulkan
bridge (tools/vkbridge) that runs the guest's Vulkan on the phone's own driver, with BC1-BC7,
clip/cull distance, vertex-divisor and depth-clip emulation and dma-heap memory sharing for Mali.
All of the bridge is ASEbrahim's work; squashed only to carry it on this test branch.

Combined with #570 on this branch, a device draws through exactly one path:
- Adreno: Turnip, unchanged (checked first; the bridge setting is ignored there).
- PowerVR / Xclipse with the system HAL and a render node: the system-Vulkan path (#570).
- Anything else with the Setup toggle on (Mali): the bridge.

* Test branch: keep #570's DXVK build recipe so its pinned PowerVR components verify

#602 adds output checks to tools/dxvk/build.sh; tools/powervr/fetch.py pins the exact
recipe the published PowerVR DXVK was built from, so the branch carries #570's copy.

* Test branch: make #570, #602 and #560/#561 pass each other's tests

- tools/dxvk/build.sh: #602's copy (its output checks) and the PowerVR pin in
  tools/powervr/release.json moved to that file's hash; the recipe's outputs are unchanged.
- droiddeck-session: the presentation block sets _bl_cef for #570's PowerVR path, and the UI
  block keeps main's order, defaulting to -cef-use-angle=vulkan when the block has not run.
- Compositor test harnesses: AHardwareBuffer stubs for #570's AHB import, and a stub for
  vkp_effects_forget_image (main #597) that #561's caller harness predates.

* Auto drivers for Mali and Xclipse on the non-Adreno test branch

Auto now picks an open driver pair for the GPU, the way it does for Adreno:
- Mali (no KGSL, /dev/mali0): the GPU's name ("Mali-G720-Immortalis MC12", from the vendor
  Vulkan driver or kbase's gpuinfo) picks the PanVK build: G52-G78 (Job Manager), G610/G710,
  G615 or G720. A Mali none of them covers (G925...), or one whose pair is not published yet,
  draws through the Mali bridge, switched on by Auto.
- Xclipse keeps the system-driver path as Auto; the RADV pair is offered as a manual choice.
- The pairs come from The412Banner/droiddeck-nonadreno-drivers (one pre-release per driver,
  each a DriverBundle zip). Only a device without an Adreno reads that repo.
- The importers accept PanVK and RADV libraries (libvulkan_panfrost / libvulkan_radeon).
- An open driver pair and the Mali bridge are alternatives: a selected pair turns the bridge off.
- TU_DEBUG is only set for Turnip, on an Adreno.

Every new branch is reached only when the device has no Adreno; an Adreno's detection, release
sources, Auto choice and session environment are unchanged.

* Auto: the one-binary PanVK kbase build for Mali v9-v13 on Android 15+

The412Banner/droiddeck-nonadreno-drivers adds panvk-mali-kbase: one PanVK build for
G57/G68/G77/G78, G610/G710, G615/G715, G720/G725 and G925, whose display half needs Android 15.
On Android 15+ Auto prefers it for every Mali it covers; below 15, and whenever its release is
not listed, Auto falls back to the GPU generation's own pair. G52/G76 keep the Job Manager
build; a G715/G725/G925 below Android 15, or any Mali no pair covers, draws through the bridge.
Every pair stays selectable by hand.

* Test: the G925 is in the kbase build's family now

* Offer faux123's device PanVK builds (RP4 Pro, Ace, RG556) as manual pairs for their Mali

* Detailed graphics logs for non-Adreno test reports

- graphics-report.txt in every session folder: the graphics path the session draws with and why
  (Turnip, system Vulkan #570, Mali bridge #517, or an open driver pair with its release), the
  driver mode and choices, what Auto would pick, the GPU (family, Vulkan device name, kbase
  gpuinfo, Android, SoC, kernel), the GPU nodes the app can see (access, device numbers, SELinux
  label; nothing is opened) and the guest's graphics environment. At the end it adds the
  compositor's driver lines from app.log and the game launches that were logged.
- vulkan-summary.txt: the session's own vulkaninfo --summary with the driver as exported, in the
  background with a 10 s timeout.
- Per-game logs under games/<time>-<appid>/: Proton's log, DXVK's and vkd3d-proton's, Mesa's and
  PanVK's startup messages and the launch environment, from droiddeck-game-env. Each file is cut
  to 20 MB and the folder to 120 MB at the session's end.
- The per-game logs and the Vulkan summary are on for a GPU that is not an Adreno, and on an
  Adreno only with Setup's new "Detailed graphics logs" switch. Share logs already takes the
  whole session folder, so all of it is in the zip, scrubbed as before.

* Mali pairs: a stand-in render node, the driver's real library name, and a Mali known by its chip

- Auto on Jim's Dimensity 9300+ chose the bridge: the GPU had no name (the app had not asked
  Vulkan yet and kbase's gpuinfo is unreadable under SELinux), so a Mali-G720 counted as a Mali
  no build covers. The name now falls back to the GPU the chip is known to carry (Dimensity,
  Helio, Kompanio, Tensor); and when nothing names it, Auto asks the vendor Vulkan driver off the
  main thread before it settles for the bridge. Auto logs what it decided and why.
- An open Mali driver pair gets /dev/mali0 as the guest's render node, as the bridge does
  (bindGpuNode, BL_DRM_STANDIN): gamescope needs the node the driver reports. The session shim
  only answers libdrm's PRIME and GEM-close calls on it, which PanVK on kbase never makes.
- A PanVK or RADV runtime half is installed as libvulkan_panfrost.so / libvulkan_radeon.so rather
  than under Turnip's name; Turnip keeps libvulkan_freedreno.so.
- graphics-report.txt names the render node the guest got, adds the session script's driver lines
  and flags a failed Mali-bridge self-test at the top.

* Auto takes the RADV pair on a Samsung Xclipse, with the system route as its fallback

A tester's Galaxy S24 FE (Xclipse 940) boots to Steam with the RADV-Xclipse pair, where the
system-driver route fails at Steam's OpenGL (glamor and GLX cannot load a driver). Auto now
downloads and selects RADV on an Xclipse like the Mali pairs, and falls back to the system route
only when RADV is not published. #570's reset of both drivers at each start no longer undoes an
open driver pair. PowerVR (vulkan.powervr.so) keeps the system driver as before.

* An Exynos with a Mali is a Mali, not an Xclipse

The system route took vulkan.samsung.so as Samsung's Xclipse, but an Exynos 1280/1380 (Galaxy Tab
S9 FE: Mali-G68) may name its HAL the same; with /dev/mali0 present that HAL is not the system
route's, and the device is detected as the Mali it is. The chip table adds the Exynos 1380 and
1280 (s5e8835, s5e8825: Mali-G68).

* Auto fetches the open drivers itself; Xclipse named as such; sound and frame-gen in the logs

- Auto looks online again when its saved release list predates this device's open drivers, so a
  Samsung or Mali phone gets its pair without pressing refresh first.
- A Samsung Xclipse is labelled "Samsung Xclipse" (not PowerVR), with its own support line.
- Per-game logs add audio-streams.txt: PulseAudio's sink inputs 20 s and 60 s into the launch,
  so a silent game shows whether its stream reached Pulse.
- graphics-report.txt states the frame-generation setting and keeps the LSFG gate, FrameGen and
  audio lines from app.log.

* Client sound retries a briefly disconnected AAudio; kbase ioctl refusals explained in the report

A Galaxy S24 FE's session had no sound at all: the DirectAudio sink's AAudio stream opened with
AAUDIO_ERROR_DISCONNECTED while the output route was still changing at session start, and the
plain AAudio fallback failed the same moment. The sink guard now retries DirectAudio, then the
plain sink, five times over ten seconds and says which one it got. graphics-report.txt keeps the
client-sink and kbase lines, and explains a KBASE_IOCTL_MEM_EXEC_INIT EPERM as the kbase driver's
own answer rather than the session's sandbox.

* Mali pairs draw the display on the phone's own Mali driver; Xwayland falls back without glamor

- Testers' Mali pairs got the guest drawing (gamescope on the stand-in node, Zink on PanVK) but
  the compositor's PanVK Android half failed on Mali gralloc: it probes AHB formats 0x38/0x3b that
  mali_gralloc does not have, and "vkCreateImage w/ native buffer failed". Under Auto a Mali pair
  now leaves the display on the phone's own Vulkan driver (dma-buf, modifiers and AHB all pass the
  testers' checks) and runs the pair's PanVK in the guest; the Android half stays installed for a
  manual pick. "Pair in use" now follows the runtime half.
- A session after one whose Xwayland crashed (segfault, then gamescope's X11 I/O error) starts
  Xwayland with XWAYLAND_NO_GLAMOR=1 on a non-Adreno device, and says so in app.log.
- graphics-report.txt names the display driver the compositor used, and keeps gralloc, dma-buf,
  modifier and import lines from app.log and Xwayland's own lines from the session log.

* Non-Adreno sound: the daemon falls back on its own; the build's commit in device.txt and the report

The S24 FE's session still had no sound: its AAudio refuses DirectAudio's low-latency stream with
AAUDIO_ERROR_DISCONNECTED, and the sink guard never got to retry because pactl did not reach the
daemon in time ("the daemon did not answer in 15 s"). On a GPU that is not an Adreno the daemon's
own start-up script now asks DirectAudio again without low latency and loads the plain AAudio sink
underneath it, so a default sink exists whatever pactl does. device.txt and graphics-report.txt
name the build label and source commit, so a log says which build it came from.

* Non-Adreno sound: no second DirectAudio load (it hung the daemon); the plain AAudio sink underneath

On the S24 FE the daemon stopped after DirectAudio's failed low-latency load: the second
DirectAudio load in the same daemon never returned, so nothing after it ran and pactl never
connected. The daemon now loads only the plain AAudio sink (no low latency) after DirectAudio,
inside .nofail, and sets whichever exists as the default.

* gamescope: explicit sync off where the kernel or the stand-in node cannot signal its timelines

Adds tools/gamescope/patches/0126 (GAMESCOPE_DISABLE_EXPLICIT_SYNC=1 for the nested backends) and
sets it on a GPU that is not an Adreno when the kernel is older than 6.6 (no
DRM_IOCTL_SYNCOBJ_EVENTFD) or the guest's render node is Mali's stand-in. The graphics report
lists it with the rest of the guest's graphics environment.

* Test branch: gamescope with the explicit-sync switch (0126), pinned by sha

Built by build-gamescope.yml run 38335744351 from 0136fb61 and published as a component release
of The412Banner/droiddeck-nonadreno-drivers; the apk build fetches it by tag and checks the sha.

* Sound: nothing that can block in the daemon's start-up; Steam's web compositing in software on open pairs

- The S24 FE (US) daemon hung loading the plain AAudio sink from default.pa (its AAudio open
  blocks rather than fails), so it never finished starting. default.pa is back to DirectAudio
  alone inside .nofail; the fallbacks are loaded from the app once the daemon answers, each pactl
  bounded by its timeout (DirectAudio, then the plain sink with and without low latency). The
  guard waits 30 s and logs, with timestamps, how long the daemon took, whether its socket and
  pactl exist, and what it finally got.
- With an open driver pair on a GPU that is not an Adreno, Steam's CEF composites in software
  (-cef-disable-gpu-compositing) with GPU raster kept: RADV on Xclipse showed stale, half-written
  tiles, as #570 saw on PowerVR. The session log says so.

* Mali under Auto: the display always on Android's own Vulkan loader; a reboot hint for refused audio

Axel's Tab S9 FE still drew its display with the PanVK Android half, set by an earlier build, and
stalled at "Waiting for Steam's first frame" on Mali gralloc's format probes. Under Auto a Mali's
display now goes to Android's own loader whatever was set before (DriverMenus resets it, and the
compositor's driver choice ignores a pair's Android half), with no HAL path to find first. A pair
counts as in use when its runtime half is. A manual pick of the PanVK display is kept.
When audio.log shows AAUDIO_ERROR_DISCONNECTED, the report and the client-sink line say Android
refused the output and that rebooting the phone usually fixes it.

* Fix: call SessionPrefs.gpuDriverMode through its instance from Java

* Compositor: log each new dma-buf format/modifier/size it imports (for colour and swizzle reports)

Steam's software web compositing already covers every open driver pair, Mali included.

* Open driver pairs: vkd3d-proton reports the driver's caps; buffer attach/release tracing; Mesa log

- With a PanVK or RADV pair (BL_OPEN_DRIVER=1), droiddeck-game-env drops the app-wide
  VKD3D_FEATURE_LEVEL=12_2 and VKD3D_SHADER_MODEL=6_9 so vkd3d-proton reports what the driver has
  (an Unreal DX12 game crashed at start on PanVK with the overrides); a game's own setting still
  wins, and launch.txt records DROIDDECK_VKD3D_CAPS=driver.
- The compositor traces, on a GPU that is not an Adreno, the first 400 dma-buf attaches and buffer
  releases by wl_buffer id and sending line, and logs any release of a buffer already released
  and not attached again (gamescope's "Compositor released us but we were not acquired" on G925).
- Per-game logs no longer set MESA_DEBUG=silent, which kept mesa.log empty.

* Tests: the dma-buf quarantine harness follows send_buffer_release's tracing macro

* Mali (Venus): David Cimo's Venus route sources and recipes

From DavidCimo/droiddeck-mali, branch mali-venus @ 4f838891 (prototype 13; his 12 commits on top
of DroidDeck 0.3.1, GPL-3.0), by David Cimo:
- tools/venus: Mesa Venus vtest patch (incl. the per-queue submit_mutex fix and the cached-memory
  frame readback), virglrenderer Android patch, the Mali compatibility layer (the six features
  DXVK needs: fill modes, multi-viewport, robustness2, clip/cull distance, BC1-BC7) and his tools.
- tools/linuxfs/preload/venus.c: keeps Zink's kopper under Venus.
- tools/gamescope/patches/0127 (his 0114): shm buffers uploaded on every commit.
- docs/development/mali-venus.md: his design notes.
- tools/venus/ci-build.sh and build-venus.yml: his build recipes as one CI job that packs the
  component (vtest server, ICD, layer) as venus.tzst for the apk.

Co-authored-by: Dersim Abbas <derabb0620@gmail.com>

* Mali (Venus) as a selectable route, by David Cimo

Ports David Cimo's Venus route (DavidCimo/droiddeck-mali, mali-venus @ 4f838891) onto this branch
as "Mali (Venus)", one tap in Setup next to the Mali bridge:
- VenusComponent (his): stages the Venus ICD and runs virglrenderer's vtest server over the
  phone's own Vulkan driver; the guest gets VK_ICD_FILENAMES, VN_DEBUG=vtest, VTEST_SOCKET_NAME and
  MESA_VK_WSI_DEBUG=sw.
- Selection rule: Venus when Setup's "Mali (Venus)" is on, on a GPU that is neither an Adreno nor
  a system-driver one (PowerVR, Xclipse), and the apk carries it. It then replaces the Mali bridge
  and any open driver pair for the session, and the display stays on the phone's own driver.
  Auto is unchanged (the PanVK pair). Adreno never takes any of it.
- The compositor enables only the dma-buf extensions the driver has, logs a vendor driver's
  extension list, and gives a zero row pitch a packed row (his vk_present.c changes).
- The Mali compatibility layer is staged into the runtime on non-Adreno devices only.
- The component (vtest server, ICD, layer) comes from build-venus.yml as venus.tzst, published on
  The412Banner/droiddeck-nonadreno-drivers and pinned by sha in tools/venus/release.env.
- gamescope 3.16.29-p15 adds his shm upload patch (0127) next to 0126; pinned by sha.
- device.txt and graphics-report.txt name the route.

Co-authored-by: Dersim Abbas <derabb0620@gmail.com>

* Mali: Venus gamescope without robustness2, the bridge switch honoured and kept, clean driver switches

- gamescope 0128: VK_EXT_robustness2 is optional. A Mali driver through Venus has none, and
  gamescope stopped at "Missing required extension: VK_EXT_robustness2" (the wayland_surface error
  after it was only the knock-on). Without it, unused descriptor slots point at a 1x1 texture
  instead of VK_NULL_HANDLE. (David Cimo's Pixel 9 driver has robustness2, so his build never
  needed this.) gamescope component rebuilt and pinned by sha.
- Open-files limit: on a GPU that is not an Adreno the session script raises the soft limit to the
  hard limit for the whole session tree (a PanVK-kbase session froze on "Too many open files"
  after ten minutes) and graphics-report.txt shows before and after. A stopgap; the driver leak is
  fixed separately.
- The Mali bridge switch is honoured: when on and usable it wins over a PanVK pair for the
  session (Venus still wins over it). Selecting a pair no longer switches the bridge off, which is
  why the switch did not survive an app restart (Auto re-selected the pair at start). Setup says
  when this phone cannot use the bridge at all.
- Driver switching: picking a Mali pair by hand keeps the display on the phone's own driver, as
  Auto does (a PanVK Android display stalls on Mali gralloc at "Waiting for Steam's first frame",
  and stayed set after switching back); installing a bundle again replaces it instead of adding a
  "-2" copy beside the old one.
- graphics-report.txt names the runtime driver's folder and libraries, and the previous session's
  drivers, flagged when they changed.

* gamescope p16 (0128 robustness2 optional), pinned by sha; graphics-report says who chose the display driver

* Bundle replace only for open non-Adreno pairs; Adreno bundles keep their numbered copies

* Rebuilt open drivers reach phones: re-downloaded when their digest changes, release list hourly on non-Adreno

The non-Adreno driver releases replace their assets in place (the PanVK kbase sync-file fd leak
fix). A download is now remembered with its GitHub sha256, and an asset whose digest changed
counts as not installed, so Auto fetches it again and the bundle replaces the old one; the release
list is re-read after an hour instead of a day on a GPU that is not an Adreno.

* Mali compatibility layer: multiDrawIndirect, depthClipEnable and robustness2 for DXVK on Venus

A Galaxy A15 (Mali-G57) on Venus got gamescope and Steam up, but DXVK refused the GPU:
"Device does not support required feature 'multiDrawIndirect'". DXVK 3.1 stops at the first
missing feature, so the rest of its required list (dxvk_device_info.cpp) was checked against what
the testers' Mali drivers cannot have, and covered in the same pass, on top of David Cimo's six:
- multiDrawIndirect: reported, taken off the device, and an indirect draw with drawCount > 1 is
  recorded as single draws at offset + i * stride; maxDrawIndirectCount reported as 2^30.
  (drawIndirectCount is optional for DXVK and stays as the driver says.)
- VK_EXT_depth_clip_enable (required): offered when the driver lacks it; depthClipEnable off in a
  pipeline becomes depthClampEnable, and the extension's structures never reach the driver.
- VK_EXT_robustness2 missing entirely (gamescope saw the same on these phones): offered with
  robustBufferAccess2 (as robustBufferAccess, as before) and nullDescriptor, emulated by small
  stand-ins (a zeroed buffer, a 1x1 image) for VK_NULL_HANDLE buffers, image views and vertex
  buffers in plain, template and push descriptor writes and vertex-buffer binds. A null
  texel-buffer view stays null (its format is not known).
The layer logs every feature it emulates per device.

* Venus component 22694a38 (layer: multiDrawIndirect, depthClipEnable, robustness2), pinned by sha

* Non-Adreno round 3: bridge images, Venus GL, shared buffers, Steam GPU drawing

- vkbridge: the memory model skips lazily allocated types. Mali-G615 lists
  DEVICE_LOCAL|LAZILY_ALLOCATED first; taken as the device-local type it left
  images with no memory type (self-test "image clear/draw: setup" FAIL,
  gamescope "No compatible image memory type").
- Session: a bridge self-test that fails images or draws falls back to the
  runtime's driver pair for that session (BL_VKBRIDGE_FALLBACK_ICD); Setup
  and the graphics report say so.
- Venus: the Mali compatibility layer runs in every process but gamescope
  (DROIDDECK_MALI_COMPAT=1), so Zink in Steam and Xwayland gets
  nullDescriptor; null texel-buffer views get stand-ins too. Without
  nullDescriptor the session's GL goes to llvmpipe.
- gamescope 0129: a refused compute pipeline is named with its SPIR-V
  capabilities.
- Compositor: a buffer on two surfaces at once (gamescope's planes while a
  notification is up) is released only when the last one lets go.
- Open driver pairs: processes.txt timeline for the first three minutes;
  Setup "Steam interface: GPU drawing" turns off software web compositing.

* Pin gamescope p17 (0129) and Venus 55b30fbf

* Non-Adreno round 4: Mali GPU-drawing block, gamescope YCbCr retry, GL probe, bridge draw sync

- Setup's "Steam interface: GPU drawing" is hidden on Mali and a saved "on" is
  cleared: with PanVK it rebooted an Edge 60 (G615) as steamwebhelper started.
  Kept for Xclipse.
- gamescope 0130: a composite pipeline refused at start-up is retried with a
  layout without immutable YCbCr samplers (G615 through Venus refused every
  composite shader; their SPIR-V has no Float16, so fp16 was not the cause).
- Venus: droiddeck-glprobe opens GL through GLX the way the Steam client does,
  with the loader's reasons logged; when it fails the client's GL goes to
  llvmpipe.
- vkbridge self-test: the draw check waits for the render pass's stores before
  copying out (a tiler read zeros without the dependency).

* Pin gamescope p18 (0130)

* Non-Adreno round 5: gamescope memory fallback, Venus destroy guard, OpenAL depot

- gamescope 0131: DEVICE_LOCAL|HOST_VISIBLE requests fall back to host-visible
  memory (the bridge's unified-memory model lists none with both), with the
  request, type bits and memory types logged on failure; 0130's probe pipeline
  is kept and skipped when forced.
- Venus: GAMESCOPE_NO_YCBCR_SAMPLERS=1 from the start; virglrenderer ignores
  the destroy of a pipeline it never created instead of marking the context
  fatal (vtest server exit 137 on a Mali-G615).
- Steam's OpenAL depot (229020) maps to oalinst_dll, so games that list it
  (Hotline Miami) get OpenAL in their prefix.

* Pin gamescope p19 (0131) and Venus 6199a93f

* Non-Adreno round 6: PowerVR PRIME on old kernels, thermal, hang-up names, bridge flippable images, Venus Zink variants

- drm.c: PR #570's current PRIME ownership check (F_DUPFD_QUERY, then kcmp,
  then the F_SETOWN_EX owner marker): on a kernel before 6.10 with kcmp
  blocked, drmPrimeFDToHandle answered EOPNOTSUPP for every PowerVR import
  (Pixel 10, Android 17: Zink "failed drmPrimeFDToHandle", Xwayland error 7,
  gamescope X11 I/O error). The Mali stand-in node is kept.
- A /sys/class/thermal the kernel will not list gets an empty directory, so
  mangoapp no longer aborts on it.
- gamescope 0132: a hung-up waitable is named before the abort; 0133: the
  bridge's flippable images use supported-but-unexportable modifiers instead
  of asserting.
- Venus: when Zink does not start, the loader's view is logged and Zink is
  retried without ZINK_DEBUG=compact, with ZINK_DESCRIPTORS=auto and without
  kopper before falling back to llvmpipe.

* Pin gamescope p20 (0132, 0133)

* Non-Adreno round 7: bridge command-buffer guard, Venus Zink trace, PowerVR mangoapp, Xclipse label

- vkbridge server: every command buffer a device hands out is tracked; Begin,
  End (stream replay) and QueueSubmit refuse one it never allocated or has
  freed (VK_ERROR_DEVICE_LOST, logged) instead of passing it to the driver,
  where Mali's vkBeginCommandBuffer crashed the app (SIGSEGV 0x10, Steam's
  Zink on an Edge 60 and a Tab S11).
- vkbridge server: a fault inside the driver while serving a request cuts
  that client off (SIGSEGV/SIGBUS guard per request) and leaves its objects
  alone; the app and the other clients carry on. Other faults go to the
  previous handler.
- vkbridge server: the pipeline cache directory is copied; the JNI string it
  pointed at was freed (garbage in the cache path).
- Venus: DROIDDECK_MALI_COMPAT_TRACE=1 makes the Mali compatibility layer log
  what an application queries before vkCreateDevice; a failed glprobe adds a
  traced run and vulkaninfo --summary under the same environment.
- PowerVR: mangoapp draws with llvmpipe (Zink could not make it a swapchain
  and it crashed at every start).
- Setup: an Xclipse GPU reads "Experimental: RADV or the system Xclipse
  driver", not the PowerVR line.

* Pin Venus e40cd361 (layer trace)

* Non-Adreno round 8: bridge sharing fallback and crash detail, Venus diagnostics and 1.2 gate, compositor disconnect reasons, RADV upstream

- Mali bridge: the self-test fails "memory sharing" when the server offers
  no host-visible memory type (no sharing method passed, RP4 Pro G77); the
  session then falls back to the PanVK pair like a failed draw, and Setup
  says the bridge cannot share memory with that driver. Without a pair to
  fall back on, the log says so.
- Mali bridge: a guarded driver crash now logs the sub-command it was in,
  the fault address and pc (library + offset via dladdr), the command
  buffer's level, begin flags, pool flags and state, and the last 32
  replayed commands. Begin on an executable buffer from a pool without
  RESET_COMMAND_BUFFER_BIT is logged once (implicit reset).
- Venus: vulkan-summary.txt gets the device extension list and key
  features (full vulkaninfo in vulkan-full.txt); a failed GL probe runs
  once with VN_DEBUG=init,result, ZINK_DEBUG=mem, MESA_LOG_LEVEL=debug and
  the layer trace into glprobe-trace.txt. The Mali compatibility layer's
  trace covers every pre-device query (devices, memory, queue families,
  formats, image formats, external handles) and names the extensions.
- Venus: off when the phone's driver reports Vulkan below 1.2 (gamescope
  skips such a device); Setup and the graphics report say why and the
  session uses the PanVK pair.
- Compositor: libwayland's own disconnect reasons go to wayland.log, and a
  client's buffer may grow to 1 MB before a slow reader is dropped. A
  session that ended without teardown records Android's exit reasons.
- Drivers: RADV-Xclipse upstream (radv-xclipse-upstream) is a manual
  choice for Xclipse; Auto keeps radv-xclipse.

* Tests: the terminal-callers harness stubs the Quest layer and Cardboard modules and Android's system properties

* Pin gamescope p21 (main's patches + 0120-0133) and Venus a4d47cf3 (layer trace)

* Display driver Auto: Quest's patched Turnip first; the system driver only for a Mali, other GPUs keep the generic fallback

* Open driver pairs: the installed build's version, its upload date, and an Update when the release is rebuilt in place

- The release check records each asset's GitHub id and updated_at; a
  download records them (with the digest) for an open non-Adreno pair.
- Components > GPU drivers: an installed open pair shows its manifest
  version ("android <tag> + linux <commit>"), one not yet installed shows
  "built YYYY-MM-DD". A different digest, asset id or upload time on the
  same tag marks the installed pair "Update available" with an Update
  action: the pair is downloaded again and replaced in place, and stays
  selected only if it was. Adreno and DD-Turnip pairs are unchanged.
- graphics-report.txt: the pair release line gives the installed and the
  listed upload dates and flags a newer build; an exact bundle id match is
  preferred (RADV-Xclipse-upstream is not RADV-Xclipse).

* Session preload: drop oom_score_adj raises so lmkd does not treat games as cached apps

steam-launch-wrapper starts every game with --oom-score-adjust 900; on
Android 900 is CACHED_APP_MIN_ADJ, so lmkd kills the running game first
when memory runs short (and on Linux 6.1 the raise becomes the process's
permanent minimum). A process in the app cannot go below the score it
inherits, so the writes that succeed from inside are raises: every
write-open of /proc/<pid|self|thread-self>[/task/<tid>]/oom_score_adj (or
oom_adj), through open/openat or fopen, goes to /dev/null, logged once.

Based on the oom_score_adj redirect in the preload's opens.c by jdmg28 (https://github.com/jdmg28/DroidDeck-Mali/commit/6be00e00)

* Display: why presenting failed on the session-ended screen, and the display driver that really loaded

- The compositor records why it cannot present (no Vulkan driver loaded,
  vkCreateInstance/vkCreateDevice failed, no GPU or graphics queue, no
  swapchain on the screen with the driver's reason, device lost, GPU work
  unconfirmed). Each is a DD_PRESENT_FAULT line in wayland.log, read back
  over JNI or from wayland.log; the session-ended screen shows it instead
  of a black screen, and graphics-report.txt gets "!! DISPLAY FAILED". A
  first frame or a working swapchain clears it.
- After the display device is created, the driver that answered is logged
  from VkPhysicalDeviceDriverProperties (device, driverName, driverInfo,
  driver id, Vulkan version) and reported in graphics-report.txt. When a
  driver pair's display half was requested but a vendor driver answered
  (adrenotools falls back to the system driver when the requested one does
  not load), it says so.

Based on DD_PRESENT_FAULT in vk_present.c / waylandcomp_jni.c / SessionActivity by jdmg28 (https://github.com/jdmg28/DroidDeck-Mali/blob/arena/cd8ab18a-droiddeck-mali/app/src/main/cpp/waylandcomp/src/vk_present.c)
Based on the adrenotools silent-fallback finding by ryanistr (https://github.com/ryanistr/DroidDeck-Mali/blob/main/docs/development/panvk-mali-g77-bringup.md)

* tests: steam presentation test sets 0.5.0's steam_client

* Non-Adreno: find every driver pair, Venus before the bridge, fix the bridge's begin info

From the logs testers sent since c9ebb247:
- The app read the drivers repo's newest 15 releases only; the component releases (gamescope,
  Venus) pushed every PanVK pair and RADV-Xclipse past them, so Auto found no pair on any Mali
  and switched the Mali bridge on. The non-Adreno repo is now read in one page of 100.
- Auto's stand-in for a missing pair: Mali (Venus) where the apk carries it (Steam runs on it
  from the G57 to the G1-Ultra), the bridge otherwise, nothing on a driver below Vulkan 1.2. It
  no longer clears the Linux driver, does nothing when the list could not be read, records that
  it chose the route, and turns it off again once a pair is installed. A bridge that earlier
  builds left on under Auto is taken as Auto's.
- Mali bridge: vkBeginCommandBuffer sent its begin info without the count the server decodes, so
  Mali got a zeroed begin info with stale flags and crashed at 0x10 (Pixel 8 Pro G715, Lenovo
  G615, Xiaomi G925, Tab S11).
- Mali-G1 series (MT6993, arch v14) known by its chip; its label says Venus, not the bridge.
- A session Android killed for memory is said so on the next start (the S24 FE "crashes" were
  low-memory kills, not driver faults).
- The in-app updater never installs an official (Adreno-only) build over this test build.

* Venus: destroy the device's object mutex after the objects that lock it

Bionic aborts on locking a destroyed mutex ("pthread_mutex_lock called on a destroyed mutex",
Tab S9 FE G68, Pixel 9a), so a client that exited holding objects took the render worker down.
From BattleTempest's DroidDeck-Pixel (kevinbryant551-ux/DroidDeck-Pixel, GPL-3.0).

* release check: a session helper may be extracted to another runtime path

droiddeck-steam-taskset (#570) goes to usr/local/libexec/droiddeck-steam/taskset, where PATH puts
it in front of Steam's own taskset for the client only; 0.5.0's check wanted every droiddeck-*
helper at its own path.

* Venus component 93038b7d (destroyed-mutex fix)

* Update MaliBridge to v0.5.1 (#1135)

* Mali Auto: never leave a session on the runtime's Turnip

Logs from a Retroid Pocket 4 Pro (G77), Galaxy S21 Ultra (G78), Tab S11 Ultra
(G925) and Xiaomi G610 showed Auto ending on the runtime's Turnip, where
gamescope finds no GPU ("failed to find physical device"): after a pair's
trial rolled back, when the pair is on the bad list, and when the driver
list could not be read. In each case Auto now switches on its stand-in
(Venus, or the bridge) when no open driver, Venus or bridge is set.
Under Auto the Mali display also leaves any imported driver, not only a
pair's PanVK half (a lone PanVK_G720 import gave a black screen).

* Mali bridge: MaliBridge 224b6e36 (v0.5.3 source, by ASEbrahim)

From c65062b6 (v0.5.1). v0.5.2/v0.5.3: Steam mode on older Mali drivers
(G77/G710/G610/G57) gets past "starting display and audio", OpenGL 4.6 on
most Malis through dynamic-rendering and vertex-format emulation, Dimensity
9500 texture fixes, async pipeline compile, RE2 flicker on G925, DirectX on
the Pixel 8 family. JNI entry and session env names are unchanged.

* gamescope 0134: linear when the backend offers no modifier; Venus on Mesa 26.2.5

0134: CVulkanTexture::BInit asserted !modifiers.empty() when the nested Wayland
backend offered no modifier for a flippable image's format (NieR Replicant on a
Pixel 9a under Venus, session exit 134). It now tries linear and logs it.
Venus ICD: mesa-26.2.5 (venus TLS teardown from an unloaded driver, virtio-gpu
devices without 3D skipped); virglrenderer stays on 1.3.0.

* gamescope p22-nonadreno (0134 + main's 0116 cursor fix; build run 40159674290)

* CI: build the non-Adreno additions before the preload check

* build.gradle: drop verifyHandModel (main moved the hand models into the tracking pack)

* Venus component venus-proto13-e24ed8ab (Mesa 26.2.5; build run 40161447324)

* CI: fetch the Mali (Venus) component again (lost when build.yml took main's jobs)

Build a7a1ebf1 (run 40161734101) had no assets/venus or libvirgl_test_server.so, so
VenusComponent.available() was false and Auto's stand-in would have been the bridge.

* Auto: the Mali bridge stands in on a Vulkan 1.1 Mali driver

Auto refused both Venus and the bridge when the phone's driver reports Vulkan
below 1.2, so on the G77, G78 and G610 (r32p1/r38, Vulkan 1.1) a rolled-back or
missing pair left the runtime's Turnip: "failed to find physical device"
(Retroid Pocket 4 Pro after the JM pair's trial, Xiaomi 13T). Only Venus needs
1.2; the bridge raises the driver for gamescope and runs on these phones. A
Venus switch that cannot start on such a driver no longer counts as a route.

* Tests: stub main's g_release_unpaced in the DMA-BUF quarantine probe

The probe copies release_buffer out of compositor.c; since the merge it reads
g_release_unpaced, which the harness did not declare (setUpClass failed to compile).

* Update MaliBridge to v0.5.4 (ASEbrahim)

48477fe6 (tag v0.5.4): Dimensity 9500 green squares and red-tinted textures,
Balatro and other OpenGL text, fewer crashes when memory runs low, one screen
update per game frame, picture kept after a long background pause (SIGHUP no
longer stops the server), wrong colours after changing graphics settings on
the G720, more in the session report. The app-side changes of his DroidDeck
Mali app (Steam menus setting, per-game setup, Send logs, updates) are not
part of the MaliBridge repository and are not in this build.

* gamescope 0135: linear when the driver rejects every offered modifier

An r32p1 Mali-G610 (Vulkan 1.1) behind the Mali bridge answered both of the
backend's modifiers for AR24 with VK_ERROR_FORMAT_NOT_SUPPORTED, so the first
flippable image failed and gamescope asserted in vulkan_create_flat_texture
(Xiaomi 13T). Linear, when offered, is tried anyway; the bridge makes such
images without the handle type and exports them through a dma-heap. If the
image cannot be made, BInit fails as before.

* gamescope: pin the non-Adreno p23 build (0135)

* Tests: the terminal-callers harness stubs take_shm's game-frame detection

Main's take_shm now reads surface damage, parent/role/mapped and the HUD state
to spot game frames; the harness declares them so the copied function compiles
(setUpClass failed in Build APK run 40505286127). No damage, so it stays off.

* gamescope: number the test branch's patches 0920-0935

Main now has its own 0121-0125 (window override walk, host-event wake, commit fences, done at
import, HUD frame times), which sorted in between this branch's 0120-0135. The branch's sixteen
patches move to 0920-0935 with the same last two digits, so they apply after main's set and stay
clear of its next numbers. Applying all 38 to gamescope 3.16.29 in the old order and the new one
gives the same tree (checked with patch -p1, as build-in-arch.sh does). PATCHES.md and the one
code comment that named 0130 follow the new numbers.

* check_session_assets: helpers count in usr/local/bin or the Steam taskset folder only

The merge kept this branch's pattern (any usr/ target), which main's new test rejects: a helper
extracted into a subfolder of usr/local/bin must not count. The pattern now takes usr/local/bin
under any name, as on main, plus usr/local/libexec/droiddeck-steam for droiddeck-steam-taskset.
Every helper in the overlay is still found extracted in SessionFiles.kt.

* gamescope: pin 3.16.29 p24 (non-Adreno)

Built from this branch @d13b9d88 (run 41119284267): main a5b035b2's patches plus this branch's,
now 0920-0935. All 38 applied, gamescope's tests 2/2. sha256 1d1088d4.

* Update MaliBridge to v0.5.4.2 (ASEbrahim)

95a1e600 (tag v0.5.4.2), was v0.5.4 (48477fe6). For the bridge: memory sharing without the handle
type where that is all the self-test passed (unflagged buffers, client/memory.c, server_memory.c),
the older-Mali (G52-G77) game-mode start fixes, the r38p1 beta geometry-shader erratum (gs_hide),
present timeouts and an API cap per process. Client, server and the in-app library all build from
the submodule with MaliBridge's own scripts, which did not change; the protocol only gained
fields an older server sends as 0.

* Session end: the compositor fault query no longer fails the hint when the native library is absent

presentationFault() (6778a224) called WaylandCompositor.compositorFault() directly. Main's new
SessionEndHintTest runs sessionEndHint() in Robolectric, where libdroiddeckwayland cannot load, so
all six cases ended in UnsatisfiedLinkError (Build APK run 41125749537). The call is now wrapped
like runtimeDamageHint()'s, and without an answer the hint reads wayland.log as before.

* test: stub the GPU busy reader in the caller harness

* fix: release build is not debuggable, Mali uses the system display driver, staging failure ends its own session

* fix: address non-Adreno review findings

* fix: preserve current gamescope and GPU warning behavior

* fix: retain graphics failure hints and launch diagnostics

* fix: identify non-Adreno GPUs in driver failure hints

* test: harnesses follow the external client barrier and effects upscaling changes

* fix: client sources return to foreign ownership after the overlay draws

---------

Co-authored-by: Leask Wong <i@leaskh.com>
Co-authored-by: wallentx <william.allentx@gmail.com>
Co-authored-by: Stefan Zijlstra <6730062+stefanz92@users.noreply.github.com>
Co-authored-by: William Allen <wallentx@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: Dersim Abbas <derabb0620@gmail.com>
Co-authored-by: root <root@localhost.localdomain>
Co-authored-by: ASEbrahim <ahmadsmain@gmail.com>
Co-authored-by: The412Banner <the412banner@gmail.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
2026-11-05 22:06:16 -05:00
Kurt Himebauch ee0d8d9997 fix: guard session clock logger lifecycle 2026-11-05 14:00:30 -05:00
angelrenefm 5805631be5 Session logs: record clocks, thermal status and battery temperature in every session
ClockLogComponent was only created inside startVkBridge(), so it never ran
on Adreno. Create it for every session (clocks.log, was vkbridge-clocks.log)
and append the battery temperature from ACTION_BATTERY_CHANGED to each
sample.

Part 1 of #1837.
2026-11-05 14:00:30 -05:00
DroidDeck Merge 8171bf20fd Merge latest origin/main and resolve conflicts 2026-11-02 10:44:24 +08:00
MaxsTechReview da665bb14f feat: Auto picks DD-Turnip on Adreno 7xx (#1978)
Auto now prefers the newest DD-Turnip release on the Adreno 7xx, 710/720/722 included, and falls back to the previous Banners-Turnip pick when no DD-Turnip pair is published or the build fails to start a session on the device. The 8 Gen 2 on One UI keeps its patched Banners build and the 6xx keep Banners-Turnip.
2026-11-01 17:57:57 -05:00
MaxsTechReview c5577478ca chore: remove source comments and unused code, translate every missing string (#1965)
* chore(i18n): translate every missing string in all locales

Adds the 87 strings the bottom-screen Dashboard and in-game stats pages
introduced to all 32 locales, plus the 51 older settings strings Japanese
and the 50 Chinese locales were still missing. Every locale now has all
3456 translatable strings with the same placeholders as English.

Also translates 36 entries that were still English where the language
does not use the English word, and makes es-419 touch_app_id use the same
%1$s placeholder as English.

* chore(patches): drop comments from the lines downstream patches add

Removes comment lines and trailing comments from lines our patches add,
with hunk headers recounted. Lines that a later patch uses as context
and the upstream backport 0123 are left as they are.

The gamescope, FEX, proot and xodus series still apply to their pinned
sources, and the patched trees differ only in those comments.
test_hud_frames now finds the HUD writer by its first declaration.

* docs: credit Greenlight, Better xCloud, viture-v2, GameNative and DiRTTelemetryErrorFix

These were credited only in source headers and NOTICE files.

* chore: remove source comments and unused functions

Removes explanatory comments from first-party Kotlin, Java, C, C++,
Rust, TypeScript, Python, shell, Gradle, CMake and workflow files.
License and attribution headers stay, and vendored third-party trees,
generated files and license files are untouched. A shellcheck directive
is kept, and udevmon's fallthrough comments became fallthrough attributes.

Syntax trees and token streams match the previous sources apart from the
comments and Python docstrings. Module docstrings that argparse prints
are kept, and device-smoke.sh prints the same --help text from a heredoc.

Also removes 37 functions and 4 fields that nothing referenced.

* chore: remove comments from the Syncthing integration and the latest main sources

* docs: credit Syncthing and the syncthing-android fork

* chore(i18n): translate the Syncthing strings in all locales

The 107 strings the Syncthing integration added are now in all 32 locales.
sync_web_path_locked names the Syncthing tab by its label.

* docs: credit @xXJSONDeruloXx for the HUD metric readers

The CPU, GPU load, thermal and battery readers come from their
PerformanceHudView pull requests #777, #877, #991, #1406 and #1573.
The FusionHUD credit line is unchanged.

* docs: credit the HUD metric readers to @xXJSONDeruloXx's work
2026-11-01 16:27:27 -05:00
openMali 9419a19c66 local: MaliBridge rc4, auto local DNS, KWin render node 2026-11-01 15:17:41 +08:00
maxjivi05 0a5955d6fa Merge remote-tracking branch 'droiddeck/main' into feat/malibridge
# Conflicts:
#	README.md
#	app/src/main/java/com/droiddeck/launcher/gpu/TurnipDriver.java
#	app/src/main/java/com/droiddeck/launcher/runtime/BwrapSpawner.kt
#	app/src/main/res/values-ar/strings.xml
#	app/src/main/res/values-b+es+419/strings.xml
#	app/src/main/res/values-bg/strings.xml
#	app/src/main/res/values-cs/strings.xml
#	app/src/main/res/values-da/strings.xml
#	app/src/main/res/values-de/strings.xml
#	app/src/main/res/values-el/strings.xml
#	app/src/main/res/values-es/strings.xml
#	app/src/main/res/values-fi/strings.xml
#	app/src/main/res/values-fr/strings.xml
#	app/src/main/res/values-hi/strings.xml
#	app/src/main/res/values-hu/strings.xml
#	app/src/main/res/values-in/strings.xml
#	app/src/main/res/values-it/strings.xml
#	app/src/main/res/values-ja/strings.xml
#	app/src/main/res/values-ko/strings.xml
#	app/src/main/res/values-ms/strings.xml
#	app/src/main/res/values-nb/strings.xml
#	app/src/main/res/values-nl/strings.xml
#	app/src/main/res/values-pl/strings.xml
#	app/src/main/res/values-pt-rPT/strings.xml
#	app/src/main/res/values-pt/strings.xml
#	app/src/main/res/values-ro/strings.xml
#	app/src/main/res/values-ru/strings.xml
#	app/src/main/res/values-sv/strings.xml
#	app/src/main/res/values-th/strings.xml
#	app/src/main/res/values-tr/strings.xml
#	app/src/main/res/values-uk/strings.xml
#	app/src/main/res/values-vi/strings.xml
#	app/src/main/res/values-zh-rCN/strings.xml
#	app/src/main/res/values-zh-rHK/strings.xml
#	app/src/main/res/values-zh-rTW/strings.xml
#	app/src/main/res/values/strings.xml
#	tools/linuxfs/overlay/usr/local/bin/droiddeck-game-env
2026-10-30 11:58:55 -04:00
MaxsTechReview 283e3b4549 Use the second screen on dual-screen handhelds (#1734)
* Use the second screen on dual-screen handhelds

Detect built-in second screens such as the Retroid Pocket Duo and AYN Thor.
The sections move to a menu on the bottom screen, L2 and R2 switch sections,
and text fields type on the bottom screen so the top keeps the full view.
Sessions open the bottom-screen trackpad and keyboard when they start.
Setup gains a Dual screen choice (Automatic, On, Off) with toggles for the
bottom menu and the in-game controls. Closing the bottom menu no longer ends
a running session.

* Type into Steam from the bottom screen

While the bottom-screen trackpad and keyboard controls are open in a Steam
session, Steam's own on-screen keyboard no longer covers the top screen.
The agent keeps Steam's text target and asks the app instead, which opens
the Android keyboard on the bottom screen and hands focus back to the game
when it closes. Modal and VR keyboards, and sessions without the bottom
controls, keep Steam's keyboard. The Show keyboard button now follows the
keyboard when it is closed another way.

* Open the bottom controls after the first frame and tidy dual-screen translations

* Move the in-game menu to the bottom screen on dual-screen handhelds

Fix controller input and focus on the second screen: keys and sticks reach the game after touching the bottom controls, closing the bottom controls returns focus to the game, B closes bottom typing, and the typing panel keeps a focusable window until focus has left it.

* Let B close the open layer of the session menu first and focus the selected bottom-screen mode

* Let the Retroid Pocket Duo Home double press open its quick menu during sessions

* Open the keyboard on the bottom screen for Steam text fields and hide it on Enter or when the field loses focus

* Keep controller focus on the top screen when a section is picked on the bottom screen

* Keep LB and RB on the store tabs and let Back return from a store to its tab

* Show the Adreno 722 as supported on the Retroid Pocket Duo

* Label the Steam integration suggestion's close button Close and cover that closing it is permanent

* Close the docked menu with its presentation, keep a focus picked during the stop delay, and ignore panel picks on process-settings pages
2026-10-29 07:52:18 -04:00
ASEbrahim 678e16af4d Mali old DXVK: a failed detection keeps the last automatic choice, one Proton failing does not stop the others, the bridge file's driver_api counts unless promotion=on
When nothing could be read (no apps-vulkan file and VulkanInfo failing), every automatic choice was
undone: a 1.1 phone went back to a DXVK that cannot start, and the next session flipped it again.
Now an automatic choice is undone only when the Vulkan is known and wants none.

Each Proton's swap or undo is on its own: a failure (a missing saved copy, an I/O error) is said in
the result and the remaining Protons still get theirs. When the Proton is the same but its saved copy
is gone, the choice stays and is said, instead of being forgotten with DXVK 1.10.3 still installed.

apps-vulkan: the version counts only with promotion=on; otherwise, and in files from servers before
the field (which wrote a promoted version even where it was not trusted), driver_api does. A file
whose driver_api is not the driver's own version (a driver update, a server rolled back) is left out.
2026-10-26 13:55:31 -04:00
ASEbrahim 9040f828e9 Mali bridge: DXVK 1.10.3 on phones whose Vulkan stops below 1.3
Proton's DXVK 3 refuses a device below Vulkan 1.3, without shaderInt64 or
with less than 256 bytes of push constants, so on a Mali with a 1.1 driver
(OnePlus Ace 2V, Mali-G710, r32p1) every D3D9-11 game exits. On a bridge
session the forced-package step now picks the newest DXVK that starts on
what games see: 1.10.3 below Vulkan 1.3, 2.6.2 on 1.3 without shaderInt64
or 256 bytes of push constants, Proton's own otherwise.

What games see comes from <bridge cache dir>/apps-vulkan (a bridge with
Vulkan promotion writes it after its self-test) or else from the phone's
driver (vkinfo now reports shader_int64 and max_push_constants). These
choices are marked automatic: a later session with another answer swaps or
restores them, and the player's own choice in Components is never touched.
2026-10-26 13:55:31 -04:00
Ahmad Sayed Alsayed Ebrahim 30a70a0f7c Setup: show the stored Mali bridge switch in a new process; log the server's start time
FrontEndActivity read vkBridge and vkBridgeSafe only when the Performance page
opened, so after an app restart (every APK update) Setup showed
"Mali bridge: off" while sessions used the bridge. refresh() now reads them.
VkBridgeComponent logs how long the server took to listen.
2026-10-26 13:55:31 -04:00
Ahmad Sayed Alsayed Ebrahim 5b35ace098 Mali bridge: Setup's "Safe mode" switch, on by default
A second row under the GPU check, shown only when the bridge is on: "Safe mode" keeps the
bridge's proven workarounds wherever its startup probe has not verified this GPU and driver;
off is performance mode, native paths wherever the probe passed. It reaches the server as
<cache dir>/mode ("safe" or "performance", written atomically before the server starts or is
reused, so the in-app server's JNI start stays as it is) and the guest as VKBRIDGE_MODE, which
/root/.vkbridge-env can still override. A server without modes ignores the file.
2026-10-26 13:55:31 -04:00
Ahmad Sayed Alsayed Ebrahim e04eb84090 Mali bridge: keep the server's cache directory in the app's files, not its cache
Android empties an app's cacheDir when storage runs low; it took the bridge's pipeline
caches, the probe profile, stuck-pipelines and the env file from under a running server.
The directory is now files/vkbridge-pipelines (--cache-dir and the in-app start alike), and
an existing cache/vkbridge-pipelines is moved there once. Nothing trims filesDir, so the
server's own limits bound it (64 MB per pipeline cache file, a total limit in newer servers).
2026-10-26 13:55:31 -04:00
Ahmad Sayed Alsayed Ebrahim dae36b0e67 Mali bridge sessions: Setup switch, server, session wiring
On a GPU without KGSL, Setup offers an experimental Mali bridge switch
(off by default; ignored on Adreno). With it on, the session starts the
bridge server, points the Vulkan loader at the bridge ICD, names Mali's
device as the stand-in render node, runs the bridge self-test into the
session log, and caps vkd3d-proton's feature level at 12_0. Flatpak
sandboxes get the bridge ICD and socket. The DRM preload falls back to
flock in a bridge session when kcmp is refused, and a clock/thermal log
is kept beside the bridge logs.
2026-10-26 13:55:31 -04:00
Danbro007 35b85952cf merge: 同步官方 main 并解决多语言资源冲突 2026-10-26 13:11:19 +08:00
The412Banner c5d7cdc058 Xbox Cloud Gaming: stream from the store and Games tab, native player with DroidDeck frame generation (#1531)
Xbox Cloud Gaming: stream from the store and Games tab, native player with DroidDeck frame generation

Stream Xbox games with Xbox Cloud Gaming (Game Pass) from DroidDeck, outside
the Linux session.

- Backend: `xodus-cli cloud-token` (tools/xbox/droiddeck-cloud-token.patch)
  gets the streaming tokens; they stay in memory.
- Web player (default): the Greenlight player page (tools/xcloud-player, MIT)
  in a WebView, plus Microsoft's own xbox.com/play player. In-stream menu with
  screen effects (sharpen, colour, deband, FXAA, CRT, NTSC, Toon, fps cap),
  stream quality, performance overlay (level, layout, top right / top left)
  and rumble.
- Native player (opt-in, Android 10+, Player engine: Native): Google's WebRTC
  (io.github.webrtc-sdk 125.6422.07, BSD) with the Greenlight protocol ported
  to Kotlin, in its own process (:xcloudnative) with its own instance of
  DroidDeck's compositor. Decoded frames reach the compositor as
  AHardwareBuffers (new stream mode, VK_ANDROID_external_memory_android_
  hardware_buffer import), so DDFG 2x and LSFG 2x/3x/4x run on them. Live
  frame generation, frame-rate target (presets and a 10-165 fps slider, even
  pacing), zero-copy picture, small network buffer, fast decoder, instant
  controller input, overlay with engine and on-screen fps, background end,
  restart and web fallback. It takes the main process's tokens through
  XboxCloudTokenService; they are fetched ahead while a cloud game is shown.
- The compositor requests the dma-buf import extensions only where the driver
  has them (the system driver has none).
- Catalog: cloud availability, Game Pass plan CFQ7TTC0K6L8 counted, library
  filter All / Owned / Game Pass / Cloud, Stream and Add to Games on the store
  page, stream-only Games-tab entries (Stream + Download / Play + Stream).
- Xbox games get VC++ 2015-2022 and the ARM64 runtime registry entries
  (vcredist2022_arm64, built in until the catalog has it) before each launch.
- Controller focus reaches pickers opened from a game page (install location,
  uninstall); Add / Remove from Games keep the focus.

Credits: Greenlight by UnknownSKL (Jim Kroon), MIT, player and protocol;
Better xCloud for the resolution / OS mapping; MGamer404's Bannerlator #627
for the ARM64 runtime approach. Ported from the412banner's Bannerlator.
2026-10-24 23:17:57 -04:00
Kurt HimebauchandVabian124 dccd5a7c69 fix: match the A740 UBWC hint on driver 512.676.76
Co-authored-by: Vabian124 <82999916+Vabian124@users.noreply.github.com>
2026-10-23 13:54:01 -04:00
Kurt Himebauch fc768a3c45 feat: add an A740 UBWC compatibility override 2026-10-23 13:54:01 -04:00
Danbro007 42de5f3dd1 fix: avoid incompatible Turnip selection and explain Steam startup failures 2026-10-23 16:37:04 +08:00
Danbro007 d2abaef2a3 fix: recognize SM8975 and mark Adreno 850 support experimental (#1249)
* fix: recognize SM8975 and mark Adreno 850 support experimental

* fix: retain A850 experimental status with spoofed Vulkan names
2026-10-22 10:19:23 -04:00
Resul Övür e0b3f928a6 fix: auto-driver trial rolls back when the display driver crashes at startup (#1031) 2026-10-21 23:56:43 -04:00
Kurt Himebauch 2415ff0518 fix: DD-FG 3x/4x flicker and rebrand Win-FG to DD-FG (#1132) 2026-10-19 11:21:32 -04:00
Kurt Himebauch ab6d100cea fix: keep the TP UBWC hint on for Samsung One UI 8 Gen 2 (#1128) 2026-10-19 09:58:24 -04:00
Kurt Himebauch 1fbe103ffe feat: auto driver picks come from a Drivers-CI manifest with per-GPU fallbacks (#977) 2026-10-18 14:23:41 -04:00
+13 e7bc4b03a5 Add app-wide 3DoF for VITURE, RayNeo and XREAL glasses and 6DoF for Luma Ultra (#1035)
* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Add experimental Luma tracking and stabilize SteamVR launches

Add native Luma Ultra spatial tracking, optical controllers, and stereo
calibration with DroidDeck styling, imperial/metric measurements, and
pending recenter recovery. Include the pinned hand model and calibration board.

Keep live guest and SDK files outside Android's evictable cache. Filter the
Adreno 840 sysmem override in the shared SteamVR helper, serialize timeline
mirroring, retain invalid optical controllers without event floods, and
prevent an unprivileged scheduling fallback from lowering compositor RTTIME.

Validation: latest APK build and runtime freshness checks pass; 247 affected
glasses/calibration tests pass. Native VR, helper, and packaging regressions
pass. Two earlier phone library launches sustained 60 fps for 308 and 188
seconds without recovery or restart. The newer calibration APK is installed
and checksum-verified; calibrated-hand and sustained gameplay acceptance
remain pending. One existing Android test requires Windows symlink privileges.

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

* Improve Luma Ultra tracking and isolate device-specific controls

Refine stereo hand and Joy-Con tracking, gesture release, calibration,
recovery UI, diagnostics, display modes, and compositor handling.
Keep Ultra controls and input routing behind a live SDK-confirmed Carina
connection; clear retained spatial mode when other glasses connect.
Add optional UVC transport with pinned dependencies and packaged notices.

Validation: 456 Android tests, ARM64 VR build and native regressions,
47 tooling tests, SDK/UVC-enabled and disabled builds, and 150 packaged
runtime checksums. Two shader compilation tests skipped because the
compiler is unavailable. Hardware interaction gates remain experimental.

* Delay Luma Ultra 6DoF until SteamVR settles

Suspend spatial SDK startup while SteamVR launches, then restore it two seconds
after RUNNING is confirmed. Preserve saved tracking preferences and automatically
recenter same-device restoration, including cancellation and early stop.

Discard superseded launch requests and status replies after session teardown.

Validation: 128 focused JVM tests passed on the isolated commit snapshot; 129
passed with the current local hand-tracking work. Debug build and runtime checks
passed, and the reviewed APK was installed and hash-verified on the phone.

* Clarify glasses and phone camera tracking options

Separate Luma Ultra camera controls from phone-camera tracking so the two
hand-tracking switches have clear sources. Label bare-hand controllers and
Joy-Con position tracking explicitly, explain physical Joy-Con inputs and
camera priority, and update the camera prompt and calibration guidance.

Use fresh phone section and toggle labels so existing translations do not
hide the distinction. Preserve tracking behavior and saved preferences.

Validation: 39 existing UI tests, debug build, and packaged runtime verification
passed. Reviewed changes and installed the APK on the connected phone.

* Fix tracking handoff and shared runtime regressions

Release spatial ownership and controller overrides when output returns to the phone. Preserve USB-loss recovery, keep Vulkan submissions asynchronous, clean persistent guest scratch on runtime removal, and clarify the 6DoF head-tracking control.

* Apply smart-glasses virtual screens across DroidDeck menus

* Finalize Luma hand baseline and document smart-glasses support

Keep raw grayscale-to-RGB Full hand inference, wrist-only Joy-Con reconstruction, bounded visual holds, and the dead-zone rollback. Retain opt-in steady aim, recenter controls, reproducible Lite models, and the JPEG-padding fix.

Remove unsuccessful benchmark-only and USB transport experiments. Document the cross-brand 3DoF matrix, Luma Ultra 6DoF, SDK requirements, and app-wide screen behavior.

* Fix executable permission for SteamVR launcher

* Address hand tracking and VR review findings

* Bound stereo recovery test image comparison memory

* Localize smart-glasses setup and tracking diagnostics

Move calibration controls, status messages, validation errors, distance labels,
and printed-board instructions into Android string resources. Add and update
machine-assisted translations in all 32 supported non-English locale catalogs,
with corrections for recentering, hand tracking, product names, and measurements.

Keep print instructions within the page using text layout that supports wrapping
and right-to-left text. Correct the Lite model toggle description to reflect its
Lite palm detector and Lite landmark model.

Add locale coverage, format-argument, line-break, and measurement checks, plus
French and Arabic calibration UI tests. Preserve tracking calculations and the
shared runtime storage behavior.

Validation: Android resource and Kotlin compilation; 3 localization checks;
68 focused tests; 1,597 JVM tests at a 512 MB heap; French and Arabic UI renders.

* Correct smart-glasses translations from PR review

Fix the 42 localization findings covering hand and head terminology, disabled states, calibration dimensions, camera visibility, capture rejection, and menu references. Correct the repeated capture-error ambiguity in related locales and clarify its English source. Keep Romanian setup instructions consistent with the existing informal voice.

Extend localization measurement validation to distance hints and retry guidance. Verify the recovery screen's palette-dependent text color with one row-sized pixel buffer and guaranteed bitmap cleanup.

Validation: Android resource and Kotlin compilation; 3 localization checks across all supported locales; 68 focused JVM tests at a 512 MB heap.

* Work around SteamVR device loss with Adreno 840 Turnip v0.2.0

* Withdraw ineffective SteamVR flushall workaround

---------

Co-authored-by: maxjivi05 <maxjividen@gmail.com>
Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
2026-10-18 08:37:09 -04:00
The412Banner db8d1c9910 feat: optional x86-64 Steam client (Valve's Linux client under FEX) beside the arm64 one (#152)
An opt-in second Steam client (Steam settings, Steam client: x86-64): Valve's
x86-64 Linux client, unchanged, runs under FEX in its own home with its own
game library and the same sign-in. Linux builds run directly, so titles such
as Team Fortress 2 and Half-Life use their Linux versions; Windows games use
DroidDeck-Proton as on arm64. The arm64 client stays the default.

- droiddeck-steam-x64: FEX and the x86-64 rootfs from DroidDeck-Components
  (sha256-pinned), client install and sync from Valve's CDN, sign-in shared
  with the arm64 client, its web helper on the GPU (ANGLE GL over FEX's GL
  thunk, zink, Turnip), Proton wrappers for the arm64 client's tools,
  DroidDeck direct for Linux builds, SD-card library (x86-64/ beside the
  arm64 one), repair.
- FEX 2610 built by build-fex.yml with thunks and three patches: an openat2
  fallback without openat2 (proot), newer-clang thunkgen, MAP_32BIT
  exhaustion returning ENOMEM. libblsession resolves RESOLVE_IN_ROOT paths
  inside the root.
- Session: x86-64 gating, shortcuts and compatibility tools per client,
  logs from the client that ran.
- App: client setting with the FEX version, an x86-64 chip on the Games
  header, the active client's library, art, storage, downloads, repair,
  Offline Mode, Decky, desktop mode, optional VAC diagnostics; per-client
  state for art, the content log, repair and leftovers.
- Strings in every locale.
- Review fixes: the library cache is saved only by the newest scan; an
  abandoned session's Steam logs come from the client it recorded; distinct
  VAC console names; FEXInterpreter in CPU pinning; clearer VAC hint in
  pl, ru, uk, cs and bg.
2026-10-17 23:57:52 -04:00
+13 16f9916825 Add VITURE XR controls, head tracking, and SteamVR (#732)
* Add VITURE glasses support: hardware control, 3D, head tracking

Glasses get their own controller over the MCU (permission, 120 Hz default, brightness, volume, sunblock, 2D/3D) and the game moves onto them when plugged in. The IMU drives Cardboard head tracking and the SteamVR driver. 3D falls back to one eye's view on phones that can't send the 3840x1080 signal. Options open from a glasses button in game and on the Steam page.

* Drop the glasses settings like Steam's: Play-style button, Settings lip, tabs

* Hang the glasses Settings lip over the top of the button

* Space glasses MCU commands so the IMU rate sticks, fit fixed resolutions to the glasses

* Keep Steam alive with SteamVR registered, run SteamVR at the glasses' rate, keep the glasses lip on top

* Fit VR games on the glasses: full view, seated origin at the head, pad hands reach with the d-pad

* Let the pad hands reach a metre out so buttons with deep colliders press

* Show every VR frame in order at 120 fps: wait for SteamVR's GPU work, present only finished copies, skip the grace on idle shared counters

* Glasses: SteamVR starts and stops with them, closer view with a field of view setting, Recenter on the pad

* Glasses: SteamVR field of view defaults to 90°

* VR pad hands: sticks move and aim the hands, left stick click switches the sticks to the game, d-pad pulls a held hand

* Glasses: Play SteamVR beside the glasses button instead of starting SteamVR with them, pad hands drawn as Index controllers and off while other VR controllers are connected, glasses sheet tabs sized like Steam's

* Track glasses mode, refresh-aware glasses window, align Play SteamVR with Play Steam

* Fix 3D on the glasses: full-res SteamVR presenter, revert VR 3D at session end, coalesce vsync ticks, no session restart after end

* Address review: glasses output after installs and session end, VR revert retry, display fallback, presenter swapchain retry, agent hex checks, drawer bumpers, glasses translations, docs

* Harden VITURE stereo negotiation and output refresh tracking

* Localize stereo recovery feedback and record Astra reconnect tests

* Improve test failure diagnostics and refresh Astra firmware findings

* Handle VITURE docks separately and reject truncated USB frames

* Glasses: remember a 3D fallback per model, docks as display only, VR timing fixes

- A 3D attempt that ends at the 640x480 fallback is remembered for that glasses
  model, so Play SteamVR no longer blacks out the glasses after every restart;
  Retry clears it and "3D for VR games" stays reachable
- A VITURE Mobile Dock on its own no longer counts as glasses; through a dock
  Play SteamVR is hidden and the sheet shows the output and why there is no control
- HDR is probed on the glasses when the session starts there
- Glasses frames with a mismatched checksum are marked in the status frame log
- SteamVR layer and driver vblank counters stay monotonic across refresh changes;
  one-eye render scale applies from activation and on mono/3D switches
- Compositor binds announce the refresh clients were last told; the presenter
  retries a failed first swapchain
- Dead strings and helpers removed; docs updated

* Glasses: drop USB frames with a bad checksum

* Glasses: count frames dropped for a bad checksum

* Feat/viture xr (#907)

* Add RayNeo Air and GT support to the XR glasses pipeline

* Add RayNeo Air and GT support to the XR glasses pipeline

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Checkpoint glasses tracking, calibration, and SteamVR launch integration

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Add XREAL 1S support and correct GT and Pro 2 tracking

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Fix mirrored glasses tracking and recover SteamVR after device loss

* Document confirmed XREAL 1S brightness control

* Document confirmed XREAL 1S brightness control

* Fix SteamVR glasses defaults and rendering controls

* Fix SteamVR glasses defaults and rendering controls

* chore: keep only the 3 newest session log folders (#852)

* chore: add agent comment rules (#748)

Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* Fix SteamVR polling, VITURE checksums, and fence tracking

Keep manual SteamVR launches polled, discard corrupt VITURE packets, and retire Vulkan fences out of order without blocking submissions at a fixed capacity. Preserve the contiguous completion watermark used by the presenter.

Fix optional Windows launcher configuration and audited helper staging. Add Android, Windows, and native tracker regression coverage.

* fix: wireless ADB page names the child-process switch the way Android shows it (#848)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru (#850)

* l10n: refresh stale and untranslated strings in es, fr, ko, ru

- mode_added_art_hint: now mentions Steam then SteamGridDB (all four locales).
- wincomp_needs_installer / wincomp_installers_note: es and ko still described
  the old "coming soon" behaviour; align with the current English text.
- summary_remove_game: was still English in all four locales.

Machine-assisted translation; native-speaker review is welcome.

* l10n(es): say registro, not grabación, for the missing installer record

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* fix: a failed cloud save recovery no longer ends the app (#846)

The cloud-recovery thread started at every app start had nothing to
catch an error, so one went to CrashHandler, which halts the process
with status 2. In unit tests the thread can outlive the test that
started it, fail on the torn-down preferences, and take the whole test
run down. The error is now logged and the thread ends.

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>

* fix: an interrupted Linux runtime download resumes instead of starting again (#847)

* fix: an interrupted Linux runtime download resumes instead of starting again

installOnce() asked the downloader to resume but always deleted the archive in its finally block, so the next attempt began at zero. The archive is now named after the release version and checksum, a failed download keeps what it fetched, and archives of other releases (and the old fixed name) are removed. A checksum or extraction failure still deletes the file.

* test: Downloader resumes a cut-off download from the bytes it kept

Starts a socket server that promises the whole file, hangs up part way and then answers a Range request, and checks that the second downloadFile call resumes with the right offset and ends with identical bytes.

* fix: a resumed download discards a 206 that does not start where the kept bytes end

Downloader appended every 206 response to the partial file without
looking at Content-Range. A server or proxy that answers a Range request
with a different offset would leave a corrupt file. Check that the range
starts at the kept length; otherwise delete the partial file and start
again without a Range header.

Adds a test with a server that answers the Range request from offset 0.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings (#849)

* l10n: German, French, Spanish, Italian, Portuguese and Russian for the zRAM, reset-settings and store free-space strings

Adds the strings values-de, values-it and values-pt were missing (14 each) and the six that values-fr, values-es and values-ru were missing. Machine-assisted drafts that follow each file's existing register and terms; native review is welcome.

* l10n: correct missing active swap translations

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: droiddeckctl reaches variant-package builds (recover #842) (#854)

fix: droiddeckctl reaches builds shipped under a variant package

The provider authority and the start Activity's component were fixed to
com.droiddeck.launcher, so droiddeckctl could not talk to the antutu,
ludashi or pubg builds from tools/release/variants.txt. DROIDDECK_PACKAGE
now picks the package; the Activity's class name stays the same in every
variant.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* feat: droiddeckctl reports on-screen pacing (recover #843) (#855)

feat: droiddeckctl pacing reports the frames that reached the screen

Reads SurfaceFlinger's timestats for the game's layer (or the session's
SurfaceView) over a capture: frames on screen, fps on screen, the
present-to-present histogram and how many intervals were off the usual
cadence. Records split by a refresh-rate change are summed. A game's own fps
counter counts frames handed over, so it can't show dropped or doubled frames.

Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>

* fix: Steam can restart more than twice in a session (#754)

* fix: Steam can restart more than twice in a session

Every exit 42 counted toward the cap that stops an update which will
not install, and the count was never cleared, so the third restart of
a session ended it however far apart they were. A client that ran for
a minute before asking is not that loop: the count starts again.

* fix: measure the client's run time as it exits

The time spent collecting logs and checking FEX after the client exits
counted toward its run, so a slow cleanup could make a quick exit 42
look like a long one and clear the count.

---------

Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>

* fix: the front end keeps its page when the Fold is folded or unfolded (#832)

* fix: the front end keeps its page when the Fold is folded or unfolded

MainActivity, FileManagerActivity, FilePickerActivity and StoreLoginActivity did not declare the screen-size configuration changes, so folding or unfolding a foldable recreated them and dropped their in-memory state. They now handle orientation, screenSize, screenLayout, smallestScreenSize and density themselves, like SessionActivity already does. uiMode is left out on purpose.

* fix: store login keeps rebuilding its toolbar when the display density changes

StoreLoginActivity builds its toolbar in code with dp-to-pixel values taken at creation time and has no onConfigurationChanged. It no longer declares density in configChanges, so a density change recreates it as before this PR. Size and layout changes are still handled in place.

---------

Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>

* Release pointer buttons without replaying stale motion (#803)

* Fix cursor warping on native touch down

* Preserve input cleanup without replaying stale pointer motion

---------

Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>

* l10n: translate the strings added since #284 into zh-CN, zh-HK, zh-TW and ja (#539)

* l10n: translate the 184 strings added since #284 (zh-CN/HK/TW, ja)

The stores, cloud saves, Windows components, Steam touch, desktop
removal and background-downloads strings landed after #284's
translation snapshot, so every one of them fell back to English.
Translate all 184 into Simplified Chinese, Traditional Chinese
(Taiwan and Hong Kong) and Japanese, keeping each locale file's own
vocabulary (工作階段/會話, 解除安裝/卸載, 元件/組件, 設定).

Also fix four Hong Kong strings that kept the simplified 着色器.

* l10n(zh): fix stale and ambiguous strings found in review

Severe: summary_remove_game was untranslated English in all three
files; mode_added_art_hint, wincomp_installers_note and
wincomp_needs_installer still described the pre-#480/#492 English.

Also: distinguish the Setup wizard from Android system settings in
zh-HK/zh-TW (初始設定 / 系統設定 / Android 設定), unify library as
收藏庫, component as 組件 in zh-HK, session as 會話 in zh-HK, account
as 帳戶 in zh-HK, Trending as 趋势/趨勢, Forget as 清除, reword the
re-applied-at-launch, action-failed and already-in-Games strings, and
play as 執行/開啟遊戲 in zh-TW/zh-HK.

* l10n(ja): fix stale and ambiguous strings found in review

---------

Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* Rebuild and verify Windows VR runtime components

* Rebuild and verify Windows VR runtime components

* Add top, bottom, and centered picture positions for Steam sessions (#871)

* fix: dependency scan ignores folders above the game folder (#859)

* DroidDeck-Proton: get releases from the Droid-Deck org repo

DroidDeck-Proton is now built and released on Droid-Deck/DroidDeck-Proton
(11-9.1 is Latest there), so the Components page, the update check and the
guest installer read releases from the org repo instead of The412Banner's.

* feat: low-latency controller and touch toggles in the session drawer (#808)

* fix: SteamGridDB lookups no longer stick as "no match" after a failure; add a search to the art chooser (#876)

* feat: Steam home wall fills from the signed-in library instead of store picks (#878)

* test: cover GPU family and support classification (#880)

* Fix local builds on Linux failing after the first Comet build (#866)

* feat: sort the store library and installed tabs, and switch between card and list views (#798)

* feat: three-finger tap toggles Steam's on-screen keyboard in game mode (#782)

* fix: keep Quest-patched Turnip as the auto default (#853)

* Fix deploy_local.sh and droiddeckctl not finding a phone connected over wireless debugging (#864)

* fix: keep proot sessions alive when the kernel loses fork events (#457)

* fix(quest): correct desktop and Steam display corruption across sessions (#733)

fix(quest): stabilize desktop and Steam layer presentation

Keep Quest SDR scenes and the black backdrop off the Android Vulkan swapchain regardless of session order or HDR preferences. Only report the first frame after client content is submitted.

Add backdrop lifecycle and first-frame regression coverage. Record the user's successful Quest 3 Test 2 result.

Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>

* fix: keep SteamVR syscall hooks and report Steam crashes (#905)

* fix: preserve SteamVR syscall hooks

* fix: report Steam crashes through gamescope

* fix: honor glasses pacing and resolution in SteamVR launches

---------

Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>

* Glasses: keep a pending 2D restore and the SteamVR recovery offer, show Play SteamVR only with a picture

* Translate the glasses calibration, XREAL and SteamVR recovery strings

* SteamVR recovery: give a finished teardown time to collect logs before restarting

* Credit the projects the XR glasses support builds on

* Joy-Cons: SteamVR hands from their gyro while SteamVR runs, one combined pad otherwise

* Headsets: settings badge on Play SteamVR instead of a top-right button, both shown only once connected

* Hand tracking: camera-tracked Joy-Cons and bare hands in SteamVR, drawn as white gloves

- Joy-Con movement from the accelerometer (report reordering, per-Joy-Con calibration, zero-velocity updates)
- MediaPipe pose and hand landmarks from the device camera, placement check, per-hand Kalman filter with the Joy-Con
- No controller connected: bare camera hands with Quest-style gestures, 1€ filtered, rendered as a white glove model built from a distance field
- SteamVR safe mode cleared before each start so one crash no longer blocks the driver

---------

Co-authored-by: MaxsTechReview <6025299+maxjivi05@users.noreply.github.com>
Co-authored-by: informalTechCode <informaltechyt@gmail.com>
Co-authored-by: connor g <connorsspam1992@gmail.com>
Co-authored-by: Kurt Himebauch <136133082+xXJSONDeruloXx@users.noreply.github.com>
Co-authored-by: Yassine Gherbi <y.gherbi.dev@gmail.com>
Co-authored-by: Resul Övür <92828257+ovurrsl@users.noreply.github.com>
Co-authored-by: ovurrsl <ovurrsl@users.noreply.github.com>
Co-authored-by: Kirk <kirtoy.junsay@gmail.com>
Co-authored-by: Kirk <12691869+KirkPatrickJunsay@users.noreply.github.com>
Co-authored-by: xXJsonDeruloXx <danielhimebauch@gmail.com>
Co-authored-by: angelrenefm <17342133+angelrenefm@users.noreply.github.com>
Co-authored-by: asdf17128 <asdf17128@gmail.com>
Co-authored-by: siyuan.qsy <siyuan.qsy@alibaba-inc.com>
Co-authored-by: Dantalian <wsu091227@qq.com>
Co-authored-by: Dantalian <Dantalian-dev@users.noreply.github.com>
Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
Co-authored-by: The412Banner <205237651+The412Banner@users.noreply.github.com>
Co-authored-by: FX1922 <120828496+FX192@users.noreply.github.com>
Co-authored-by: Muaz Kadan <32595066+muazkadan@users.noreply.github.com>
Co-authored-by: kingokksa <47888451+kingokksa@users.noreply.github.com>
Co-authored-by: Jamie Schenker <jam1esch3nk3r@gmail.com>
Co-authored-by: Jagger15 <jagger2333@live.com>
2026-10-17 13:17:05 -04:00
Kurt Himebauch 602a6fd734 feat: auto drivers update on app open and roll back if a new pair never starts a session (#972) 2026-10-16 16:17:44 -04:00
kingokksa 7c90879b39 feat: downloads resume where they stopped, and fall back to another source (#623) 2026-10-16 13:45:35 -04:00
Kurt Himebauch 5e57d78b5d fix: reduce flickering on thor and a7xx: match the A740 TP UBWC flag hint to the system driver so Android UI stops flickering (#963) 2026-10-16 13:37:28 -04:00
Kurt Himebauch ea0a61ca2b fix: keep Quest-patched Turnip as the auto default (#853) 2026-10-15 09:46:26 -04:00
Resul Övür 091f5e45f8 test: cover GPU family and support classification (#880) 2026-10-15 09:19:40 -04:00
Kurt Himebauch aecd2ebe1d cleanup (#764) 2026-10-13 21:27:42 -04:00
Jagger15 6de6ec821c Add experimental Quest 2 and Adreno 6xx display-driver support (#676) 2026-10-13 14:16:20 -04:00
Kurt Himebauch f4b0ab6867 feat: Cardboard VR mode with ARM64 SteamVR (#704)
* feat: add Cardboard mode with side-by-side lens-distorted eyes and 3DoF head tracking

* fix: derive the Cardboard field of view from the panel and recentre fully when far from upright

* feat: share the Cardboard head pose with the guest and add a SteamVR driver for it

* feat: run SteamVR's compositor on Turnip/KGSL with a display-extension layer and a driver-direct HMD

* feat: show SteamVR frames in Cardboard mode through a driver-side presenter and a fake direct-mode display

* feat: install and start SteamVR for Cardboard mode from the session drawer

* docs: describe Cardboard mode and the SteamVR path

* feat: drive SteamVR hands from the game pad and keep the Cardboard headset out of standby

* docs: record where the SteamVR dashboard stops

* fix: map Cardboard head tracking to the screen's axes and keep turns about the real vertical as yaw

* fix: give Cardboard its previous picture back when SteamVR stops

* fix: report sem_otime from emulated SysV semaphores so SteamVR's web helper can start

* fix: bridge SteamVR's shared semaphores across processes and keep Steam alive while SteamVR runs

* feat: present SteamVR straight to DroidDeck's compositor at panel resolution

* docs: update Cardboard VR notes for the dashboard, semaphore bridge and direct presenter

* fix: keep Wine and FEX signal handlers in the VR layer; add semaphore tracing

* fix: clear a stale SteamVR active marker on status

* fix: clear only an old SteamVR active marker

* fix: unblock SteamVR clients on Turnip and keep Steam's web helper alive across SteamVR runs

* fix: judge shared waits before a submit's own signals and on Vulkan 1.0 devices

* docs: record VR games, SteamVR Home and OpenXR results on the Thor

* docs: add Cardboard VR learnings from the Thor bring-up

* docs: add Cardboard VR screenshots from the Thor

* fix: keep the VR layer's display stand-in to SteamVR runs and clear a leftover marker at session start

* fix: report SteamVR start and stop failures from the helper's exit code
2026-10-13 14:36:56 +00:00
Jagger15 6c35297dba Add Quest 3/3S compatibility to the standard APK (#642) 2026-10-12 17:13:07 -04:00
The412Banner 3589ad9127 Games: old Games folders become entries, not Steam libraries (#542)
Games folders saved before the settings section went away were still
registered as Steam libraries on Automatic, with no way left to remove
them. Once, at app start and before any scan, each game such a folder
listed becomes an entry of its own, keeping everything keyed by its folder
(chosen exe, shortcut appid, name, Start in, launch options, art,
removal); store installs and steamapps are skipped. The folders stay bound
at their old guest paths, so no shortcut changes, and the saved roots are
cleared. A Games folder stays a library only when Steam installed a game
into it; the others leave the library list, and the runtime forgets them.
2026-10-10 16:19:17 -04:00
Kurt Himebauch fe71084f23 feat: replace the LXQt desktop with SteamOS-style KDE Plasma (#473)
* feat: replace the LXQt desktop with SteamOS-style KDE Plasma

* feat: leaving the KDE desktop logs out through Plasma and returns to gaming mode

* feat: DroidDeck logo wallpaper as the KDE desktop default

* feat: build the KDE wallpaper from the DroidDeck mark artwork

* ci: keep the built desktop package as a short-lived artifact for device testing

* fix: the desktop loading screen no longer promises Steam on the desktop

* docs: the output resize comments name the desktop's KWin

* fix: the desktop package verifies every package's Arch Linux ARM signature and never replaces a published tag

* fix: programs sent to the GPU from the desktop drop its software rendering overrides

* fix: an interrupted desktop install no longer counts as installed

* feat: pin the desktop package to its DroidDeck-Components release instead of the catalog
2026-10-09 10:39:50 -04:00
MaxsTechReview 0b04678bdc l10n: move hard-coded UI text into string resources (#212) (#282)
About 650 user-facing strings were written in Kotlin and Java, so no
translation could reach them and the UI stayed half English in every
language. They now live in values/strings.xml.

- Dialogs, menus, status lines, toasts and errors shown to the user go
  through getString/stringResource.
- Code that matched on English text now uses IDs: installer and loading
  stages, Decky stages, storage labels and the Back button's order labels.
- Choice lists (upscalers, FPS limits, textures, themes, presets) carry
  @StringRes labels instead of English.
- Robolectric tests read the app's resources (includeAndroidResources).
- Six strings nothing used any more are dropped.

Existing translations are untouched; the new strings show in English
until they are translated.
2026-10-06 21:59:31 -04:00
Juan Martí e3cf9f882a feat: recognize Adreno 650 as supported (#326) 2026-10-06 16:02:54 -04:00
The412BannerandThe412Banner 0bcb4a98fe Device details on the GPU card; Adreno model and SoC name when the kernel leaves them out (#295)
* Device details on the GPU card, and the Adreno model when the kernel leaves it out

The Components page called an AYANEO Pocket FIT (Adreno 750) "Adreno"
and warned it was "Below tested hardware (Adreno 725 and newer)": its
kernel names the GPU "Adreno33v2", GpuInfo wanted three digits, and the
SoC model is blank. When KGSL's name has no model, take it from the
phone's Vulkan driver (once this process has asked it) or from the
platform code name (pineapple -> 750, kalama -> 740, sun -> 830, ...).

The GPU card now opens with a tap or A onto the device's details,
gathered once off the main thread (DeviceInfo): SoC (maker, model,
platform, soc0 id), GPU (model and where it came from, the kernel's
name, clock, load, temperature, support), CPU clusters, memory, system,
the phone's own Vulkan driver - device, API, driver version and build,
conformance, limits, the extensions DXVK and VKD3D lean on, Android's
certified version and level - and the drivers DroidDeck uses. A button
copies it all for a bug report; each section takes pad focus so the
d-pad walks the list.

Vulkan is asked through a new small native library (deviceinfo,
vkinfo.c) that opens the system loader with dlopen and keeps nothing
open.

* Device details: the chip's model and name, CPU clusters, GPU clock range

Ideas from ClusterTune (GPL-2.0, its approach, not its code), which
tunes clocks on AYN, Retroid and other handhelds:
- The SoC model is read where vendors put it - ro.soc.model,
  ro.vendor.qti.soc_model, Android's SOC_MODEL, ro.fota.platform (unless
  it is a branch name like "MSM_13.0") - since handhelds often leave
  Android's blank (Pocket FIT: SG8350P).
- SocNames names it: model codes we are sure of (QCS8550 -> Snapdragon
  8 Gen 2, SM8750 -> Snapdragon 8 Elite, ...), else the platform as a
  family (pineapple -> "Snapdragon 8 Gen 3 family"). The GPU card's
  subtitle shows it: "Snapdragon 8 Gen 3 family (SG8350P)".
- CPU clusters come from the cpufreq policies (the cores each covers,
  min-max speed) rather than grouping cores by top speed.
- GPU clock range from KGSL's step list, or a devfreq GPU node on
  non-Adreno chips (Mali), not only the top clock.

* Device details: drop Qualcomm's own "Driver Build:" label from the driver build line

---------

Co-authored-by: The412Banner <the412banner@users.noreply.github.com>
2026-10-05 20:32:51 -04:00
MaxsTechReview 27782068a3 ESync, FSync, NTSync + OpenNow + FEX for Desktop Apps (#197)
* Make the Compatible Proton ARM64 the default and label compatible builds

The CompatToolMapping "0" default always points at DroidDeck's Proton
ARM64 tool, and per-game picks of adopted GE/CachyOS builds are kept,
including when the shortcuts writer remaps.

The tool is named after the Proton build it runs, Proton Experimental
ARM64 (Compatible), or Proton 11.0 ARM64 (Compatible) once that newer build
is installed. Adopted builds carry the same Compatible mark, read from a
string resource the app stages into the runtime, and the Proton page
explains which builds have the prefix fixes.

The registrar is renamed steam-compatibility and the tool
droiddeck-proton-arm64. Existing installs migrate on the next session: the
old tool directory is removed, every mapping that named it moves to the new
tool, and the retired bannerlator-steam-compat script is removed from the
runtime. CI and local packaging include the renamed script.

* Drop the duplicate R import left by merging main

* Add userspace ntsync for Proton on Android

Android kernels have no /dev/ntsync and its app policy refuses futex_waitv,
so every Proton 11 build here fell back to wineserver for every wait.
libblsession now serves /dev/ntsync itself: wineserver opens a memfd region,
each sync object is a timerfd that carries its slot, and the kernel ntsync
ioctls are answered in shared memory with futexes, following the kernel
driver's wake order. Valve's Proton Experimental ARM64, GE-Proton and
proton-cachyos use it unchanged.

Locks record their owner so a killed process cannot wedge the others,
signals are held off inside each critical section, dead processes and
exiting threads are swept, and object lifetimes follow close, dup2, dup3,
close_range and received descriptors.

Fast sync is on by default under Performance > Session fixes, and
PROTON_NO_NTSYNC=1 turns it off per game.

* Add droiddeck-esync as the default sync for Proton on Android

Without a kernel ntsync driver, Proton 11 builds here fell back to
wineserver for every wait. droiddeck-esync brings eventfd and shared-memory
sync to the exact Proton build a game runs on: a pack holds that build's
ntdll.so and wineserver with the patch series in tools/droiddeck-esync
applied, and the guest runs Proton from a shadow tree that links the stock
tool and swaps in those two files. A wineserver from a pack still prefers
/dev/ntsync when a kernel driver or droiddeck-ntsync is there.

Packs are built in Valve's SDK image from each release's own wine source
(Proton Experimental ARM64 tags, GE-Proton and proton-cachyos releases); the
control build must reproduce the release binaries byte for byte, and a
signed index lists the packs. The APK bundles the packs pinned in
release.env, the app fetches newer ones, and Steam's compatibility tool
picks the pack for each Proton build, so new Proton releases get packs
without an app update.

The ntdll side reads, writes and polls its eventfds with raw system calls,
so the guest's LD_PRELOAD wrappers stay out of the sync path. The server
abandons a mutex once a thread killed by TerminateThread has really exited
and when its process dies, and a mutex's owner and recursion count change
in one atomic step, so a killed owner cannot touch the next owner's count.

droiddeck-esync is on by default and PROTON_NO_ESYNC=1 turns it off per
game; droiddeck-ntsync, the userspace ntsync, is now an opt-in toggle.

* Watch Valve's Proton releases and build droiddeck-esync packs for them

A scheduled workflow reads the Proton ARM64 builds Steam ships (anonymous
steamcmd app info) and the upstream source tags, compares them with the
previous watch state and starts the pack build for any build that has no
pack yet. The pack build applies the patch series with --fuzz=0 and runs a
smoke test of each new pack against the esstress suite before it is
published.

* Add droiddeck-fsync, keep Steam and the app on one Proton, fix DirectAudio

droiddeck-fsync: libblsession answers futex_waitv(2), which the app
sandbox refuses, in userspace, so Proton's own fsync runs on the stock
Proton files with no pack. Waiters register the words they wait on in a
table beside the fsync shared memory and sleep on a futex of their own;
FUTEX_WAKE on the fsync memory wakes the registered waiters. Slots carry
one owner word that the sweeper and the owner claim with a CAS, and the
mapping table is rebuilt under a lock held across the real munmap, so a
reused address or a recycled slot cannot lose a waiter. It stands in for
a Proton build without a pack (droiddeck-ntsync where fsync is off), takes
over for games with esync off, and the "droiddeck-fsync first" toggle
(BL_FSYNC_FIRST, also per game) puts it ahead of the packs. The games
Proton keeps off fsync and esync never get it. A launch into a prefix
whose wineserver is still running keeps that server's sync choice.

One Proton for Steam and the app: the Components page's Proton is the
default Steam uses, applied live through the client while Steam runs
(droiddeck-steam-compat) and at the next start otherwise; a choice made in
Steam's menu comes back to the app. Requests are ordered by a sequence that
never goes backwards, and the page no longer jumps back to the default
after a swap or restore.

DirectAudio: the wrapper wrote the driver key with its backslashes
stripped, so no game ever used DirectAudio. Wine 11 also loads a builtin
only from the prefix, so the driver is now linked into system32 and
syswow64 before "directaudio,pulse" is selected; mmdevapi falls back to
winepulse whenever DirectAudio cannot start.

* Pick esync, ntsync or fsync from the Steam settings' Games group

A three-way tab row above the FEX preset sets the sync Proton games use. It
writes the existing switches together (droiddeck-ntsync, droiddeck-fsync
first, droiddeck-esync), so the Performance toggles and the tabs always agree,
starts on esync and keeps the choice until it is changed again.

* Make droiddeck-fsync the default sync for Proton games

A fresh install, or one that never picked a sync, starts on fsync; a choice made
in the Steam settings' Games group still sticks. Games Proton keeps off fsync
still fall back to droiddeck-esync.

* Add wineserver to the Wine sync tabs and order them ntsync, fsync, esync, wineserver

wineserver turns every in-process sync off so games wait through wineserver;
picking any other tab turns sync back on. The tabs shrink to fit a narrow pane.

* Shorten the Wine sync description

* Answer openat2 and execveat for FEX in the session preload

FEX opens every file of its x86 rootfs with openat2(RESOLVE_IN_ROOT) and
only falls back to the host path on EXDEV. Under proot on Android openat2
answers ENOSYS, so each lookup of an x86 library silently went to the host
and missed. The exported syscall() now turns openat2 into openat once the
real call reports ENOSYS: RESOLVE_IN_ROOT paths are taken relative to the
root fd (FEX has already resolved the links inside the rootfs), and an
absolute path under RESOLVE_BENEATH fails with EXDEV as the kernel would.

execveat with an absolute path, or relative to AT_FDCWD, and without
AT_EMPTY_PATH or AT_SYMLINK_NOFOLLOW, is plain execve; it is sent as such
because proot refuses execveat with a directory fd, which FEX uses when it
re-executes itself for a child x86 program.

* Run x86 Linux games and programs through FEX

Steam: Linux-only titles that have no ARM64 build (from the client's
appinfo cache: type game, demo, application or beta) are mapped to a new
compatibility tool, droiddeck-fex ("Linux x86 (FEX)", linux to linux,
no required runtime). Valve's own "fex" tool needs pressure-vessel, which
cannot run under proot, so a mapping to it or to a Steam Linux Runtime is
replaced; any other pick the user made stays. Titles that also ship for
Windows stay on Proton. When such a title is installed and FEX or the
sniper runtime is missing, the client is asked to install them.

droiddeck-fex runs the program under the FEX that Steam installs (app
3127680), with Steam Linux Runtime 3.0 (sniper, app 1628350) as the x86
rootfs:
- the sniper platform is linked in place from its usr-mtree (relative
  links only, files/usr -> .), once per runtime version;
- the x86_64 and i386 builds of libblsession and libfakeinput go into the
  runtime's lib/<triplet>/droiddeck and its etc/ld.so.preload, mirroring
  the session's own list, so x86 programs get the pads and the session
  fixes (FEX passes their system calls straight to the kernel, so the
  ARM64 preloads cannot reach them);
- Config.json sets RootFS and the GL and Vulkan thunks, so x86 games draw
  with the device's Turnip and Mesa;
- the FEX preset and the game's own environment from the Steam settings
  apply, and ARM64 entries are dropped from LD_PRELOAD/LD_LIBRARY_PATH.
It also links ~/.steam/sdk64 and sdk32 to the client's x86 steamclient
when the client has one and nothing is there yet.

Desktop: x86_64 and i386 AppImages can be imported now; they unpack
through FEX (or unsquashfs) and record their architecture. Scripts,
AppImages and programs started in a run session use FEX automatically
when they are x86, and each added app has a "Use FEX" Auto/On/Off choice
in its edit dialog. The launchers' "still running" checks also look at
FEX processes, whose exe is FEX rather than the program. A GitHub release
without an ARM64 AppImage falls back to its x86_64 one. Decky's x86
loader starts through droiddeck-fex instead of the fex-mesa rootfs path,
which no runtime ships.

The x86 preloads are built against glibc 2.31 (Debian 11) so they load
in sniper: tools/linuxfs/build-x86-preloads.sh, run in CI and by
build_local.sh. fakeinput's stat hooks fall back to __xstat on a glibc
without a stat export, and mmap64 takes off64_t for the i386 build.

* Keep a FEX unixlib from outliving its DLL

A FEX package or original bundle without the aarch64-unix helpers left
the previous version's libarm64ecfex.so / libwow64fex.so in the Proton,
so the new DLLs loaded a unixlib built for another FEX. A swap now removes
the helpers the package does not carry; FEX then runs DLL-only, which it
already falls back to when Wine cannot load the unixlib.

* Fix the Wine sync choices an audit found

- wineserver tab: it passed Proton's environment through, so a build with
  esync built in (GE, cachyos) still ran esync and a kernel ntsync would
  still be used. It now sets PROTON_NO_ESYNC, PROTON_NO_FSYNC and
  PROTON_NO_NTSYNC (unless the game's own environment sets them).
- ntsync tab: a Proton whose wineserver has no /dev/ntsync client got
  wineserver-only sync although fsync would work. The hash cache records
  whether the wineserver has one; without it the launch goes to
  droiddeck-fsync, and no stand-in or pack turns droiddeck-ntsync on.
- A build with esync built in returned before the per-game fallbacks, so
  a game that turns esync off ran with no in-process sync. It now gets
  droiddeck-fsync, or droiddeck-ntsync where fsync is off too.
- When a pack's proton cannot start and the stock one is used, or the
  selection fails, the prefix's record now says stock, so a second
  launch into the same running prefix no longer picks the pack's ntdll.
- droiddeck-fsync: its mutex is held across fork and re-made in the
  child, a closed or replaced shm fd is forgotten (close, dup2, dup3,
  close_range, closefrom), and a waiter woken while it was leaving on a
  timeout or signal reports the wake instead of losing it.
- BL_SYNC_MIN_NOFILE applies per game to every verb, debug logs carry
  prefixes.json, the device report names the chosen sync instead of the
  three raw switches, and PATCHES.md and the proot notes describe the
  selector, the fsync default and droiddeck-fsync's futex_waitv.

* Name the runtime's scripts and files droiddeck, migrating old installs

The guest scripts are droiddeck-* now (droiddeck-session and the other 19),
as are the files the app and scripts generate (etc/droiddeck, the network
state files, the components dir, the Steam install stamp, the redist marker,
the extra-Proton wrapper and backups) and the compositor's own names
(libdroiddeckwayland, droiddeck_* sources, DROIDDECK_* switches, the
wl_output and seat names).

Installed runtimes carry on: LegacyNames moves etc/bannerlator and
share/bannerlator over and leaves relative links at the old paths before
every proot command, turns any old script into a link to its new name,
moves the generated files and points menu entries at the new scripts.
The session scripts and steam-compatibility move their markers on first
use, the components dir's desired.tsv is rewritten with it, and the
runtime counts as installed under either session script.

Kept: the banner_ahb_v1/banner_desktop_v1 wire names and BANNER_AUDIO_DIRECT
(read by prebuilt Turnip and Wine builds), Banners-Turnip and other
third-party names, BL_* switches, libblsession, and credits to Bannerlator.

* Unpack x86 AppImages without FEX, then ask Steam for FEX

Importing an x86 AppImage failed when FEX was not installed yet ("needs FEX
to unpack and no unsquashfs is installed"). AppImages now unpack with
uruntime (VHSgunzo, MIT, v0.8.1 aarch64, pinned by sha256 and shipped
unmodified with its licence), which reads SquashFS and DwarFS images of any
architecture natively. FEX's own --appimage-extract and unsquashfs stay as
fallbacks, and an ARM64 image whose own runtime cannot unpack it goes the
same way.

An x86 import with FEX missing records that FEX is wanted, so the next
Steam session requests FEX and the Steam Linux Runtime, and the program's
page says FEX is not set up yet and how to get it.

* Run Vulkan Qt Quick AppImages on Wayland

OpenNOW (Qt 6.8, Qt Quick on Vulkan) closed within two seconds in a run
mode. The session sends toolkits to gamescope's Xwayland, and Qt's xcb
backend only presents with Vulkan when Mesa's X11 WSI does, which needs
DRI3; Xwayland on KGSL has none, so Qt found no queue that can present and
aborted ("Failed to create RHI").

An AppImage that bundles Qt Quick, the Vulkan loader and Qt's Wayland
plugin now runs on gamescope's Wayland socket (the desktop's, outside
gamescope), where Turnip presents as it does for games, with Qt's xcb
backend as the fallback. SDL_VIDEODRIVER and XDG_SESSION_TYPE follow, so
helpers that pick their window system from them (OpenNOW's streamer) agree
with Qt. Everything else stays on X11; a qt file in the app's directory
(wayland or xcb) overrides the choice.

* Keep gamescope's WSI layer away from Qt apps on its Wayland socket

OpenNOW still closed at once: its FFmpeg (the Raspberry Pi fork, libavutil
61) creates its Vulkan queues internally synchronized whenever the driver
offers VK_KHR_internally_synchronized_queues, which DD-Turnip does. The
gamescope WSI layer registers every queue of a new device through
vkGetDeviceQueue, which only returns queues created without flags, so it
got VK_NULL_HANDLE and vkroots aborted on assert(obj) before Qt opened a
window.

Programs that draw on gamescope's Wayland socket do not need the layer,
which only carries X11 windows past Xwayland, so it is turned off for
them. OpenNOW bundles no Vulkan loader (it reaches Vulkan through Qt and
dlopen), so a binary that uses QVulkanInstance counts as a Vulkan app too,
and a Qt Quick app left on X11 says why in the session log.

* Keep the end of the session log, and say when FEX is missing

The session sends its output through head -c into session.log. head
writes through stdio, so it held up to 4 KB that proot's --kill-on-exit
threw away when the guest ended: every log stopped mid-line at a 4096-byte
boundary, losing exactly the lines that say why a program quit (an x86
AppImage's "x86 Linux programs need FEX" among them). dd writes each read
as it comes and keeps the same cap.

A run mode always ends with status 0 (gamescope does not pass its child's
on), so a program that could not start just closed. When the log says FEX
is missing, the ended screen now says so and how to get it.

The app reads FEX's readiness from status.json, which only a launch or an
import wrote, so it still said "not set up" after Steam installed FEX.
droiddeck-fex status rewrites it, and a Steam session ends with it while
FEX is wanted. FEX is also looked for at the tool's root and under files/,
and a tool folder without it lists what it holds.

* Let FEX and its runtime install runnable on an SD card library

A Steam library on shared storage loses the executable bits, so native
tools are staged in private directories bound over it; only Proton and
SteamLinuxRuntime folders were. FEX (3127680) installed there could never
run, droiddeck-fex saw no FEX and kept asking Steam for it. FEX and the
sniper runtime (1628350) now get private directories from their first
download, whatever their install folder is called.

* Keep fsync off in the pack smoke test

A runner whose kernel allows futex_waitv started stock Proton with fsync,
so the server-side baseline never said what the test waits for and every
pack was waved through as untestable; the esync run would have measured
fsync too.

* Judge a pack against stock's own esstress failures

Stock Proton fails esstress's dup wait all under server-side sync as well
(a Wine bug, seen on the phone too), and any stock failure made the test
call the runner unusable. A pack now fails only when it crashes, hangs or
fails a check stock passes.

* Ask Steam for FEX and its runtime one at a time

Both steam://install requests were started together, and the running client
took only the first: FEX installed, the sniper runtime FEX needs never did.
Each request now waits for the client to take it before the next.

* Bundle the first published droiddeck-esync packs in the apk

* Log how an x86 program under FEX ends

FEX keeps its own errors quiet unless asked, so a program it could not run
left nothing in the session log. Its log now goes to stderr, and the AppImage
launcher records the program's exit status or the signal that ended it.

* Show the log a failed AppImage program wrote

Programs like Eden stop themselves on a failed check and say why only in
their own log under the home folder. When the program ends badly, the end of
any log it wrote during the run is copied into the session log.

* Report where an x86 program under FEX hit an illegal instruction

A tiny x86_64 preload, built without libc, catches SIGILL and writes the
address, the instruction bytes and the mapping they belong to before the
program dies as it would have. droiddeck-fex preloads it into x86_64 programs.

* Load the fault reporter from the x86 runtime

Programs under FEX look libraries up in the x86 runtime, so the reporter is
copied there with the other preloads and named by its path inside it.

* Hand FEX its x86 runtime and thunks through the environment

Valve's FEX runs portable and reads its config beside itself, so the
Config.json droiddeck-fex writes was not seen: programs ran without the
runtime. The runtime, thunk libraries and thunk list now also go in FEX's
own environment variables, and each launch says what it was given.

* Use the sync pack built for the installed Proton release

Some Proton releases ship byte-identical ntdll.so and wineserver (Valve
11.0-2b/2c, CachyOS 0702/0703), so a pack built for a newer release
matched an older install exactly and the older install never fetched its
own pack. A pack from a newer release no longer counts as an exact match;
among matches the one built for the installed version wins, then rev.

The app ranks the pack a tool already uses the same way and only fetches
a pack that ranks higher, reads the release epoch from tools.tsv and
refetches when tools.tsv changes. A prefix whose server is still running
re-checks its recorded pack on waitforexitandrun and starts fresh when a
better one now applies.

* Keep published sync packs and revocations consistent

The publish step never replaces a pack that has an entry beside it; a
pack left without its entry by an interrupted run is replaced so the
build stops repeating. Discovery counts revocations the signed index does
not show yet, including superseded packs only the flavor releases list,
so the index is signed again. The release watch always builds every
flavor.

* Fetch the droiddeck-esync packs from DroidDeck-Components

The packs, the signed index and the apk bundle now live in the releases
of Droid-Deck/DroidDeck-Components, together with the pipeline that
builds them, so this repository keeps only the app and the guest code
that consumes them. The app's index and asset URLs point there,
release.env names the repository its bundle comes from, and the apk
builds drop bundled packs that the published index revokes.

* Stop the apk build when the published sync index cannot be read

* Ask Steam for one FEX dependency at a time

The client shows a confirmation dialog for each steam://install, and a
second request replaces the first dialog, so FEX was never installed
when the runtime was requested right after it. The next dependency is
now requested once the previous one has an app manifest.

* Use generic names in the AppImage test fixtures

* Give x86-64 apps under FEX the Vulkan thunk

Apps that bring their own glibc and Vulkan loader skipped FEX's thunk
overlay and loaded their bundled desktop Mesa drivers, which crash on the
phone's GPU during Vulkan setup. droiddeck-fex now adds an x86-64 audit
module when a program's bundled glibc and libstdc++ meet the thunk's
version needs. The module sends libvulkan.so.1 lookups to a nodelete stub
that needs FEX's thunk path. That keeps the thunk mapped when an app
unloads Vulkan and loads it again, since FEX keeps its first trampoline
links and the old addresses get reused.

The fault reporter now restores the default action before re-raising,
because FEX ignores SA_RESETHAND and the handler looped.
2026-10-04 12:43:57 -04:00
The412Banner 8502fc517b Effects page in the session menu: scaling modes, screen effects and texture filtering (#198) 2026-10-04 08:17:00 -04:00