1385 Commits
Author SHA1 Message Date
Valiantsin DzerakhandClaude Opus 5.5 33d3645d90 Reuse the write-back merge's snapshot buffers instead of creating them per submission
A VMA allocation that needs a new memory block costs 8-11 ms on the replay thread, so finished submissions now return their chunks to a pool that chunk_new draws from. Chunk sizes are powers of two so that one fits the next request.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 21:55:36 +03:00
Valiantsin Dzerakh 072cccdb41 Up version 0.3.10 2026-11-04 19:10:09 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a64904dfc8 Merge task/flushhull: flushes of a mirrored pool copy exact ranges, not one span over the pool (#698)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:42:34 +03:00
Valiantsin Dzerakh be94fe0aa9 Merge branch 'dev' into task/flushhull 2026-11-04 18:42:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 835310412c Copy a mirrored pool's flushes as exact ranges, so far-apart small flushes stop copying the pool between them
nvn_pool_flushed kept one span from the lowest to the highest flush of a pool and mirror_sync copied all of it. In
Kakariko one 252 MiB pool copied 22,121 MiB for 847 MiB flushed, in spans of up to the whole pool. Over PCIe 3.0 x8
(RX 6600, Ryzen 5 5500, issue #698) a typical span takes about 30 ms of GPU time, which fits the frame spikes there.

A pool now keeps up to 32 sorted ranges and merges the two nearest above that. Writes between ranges still reach the
mirror through the write watch. Over a walk in Kakariko the upload fell from 472.8 to 125.5 MiB and no flush range
reached 16 MiB. TOTK_FLUSH_SPAN=1 restores the span. The mirror summary gains a line with the upload by source, and
--probe-vkexec checks the range list and that two far-apart flushes copy only their pages.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:41:54 +03:00
Valiantsin DzerakhandClaude Opus 5.5 17eddf41cb Merge task/mesazero, function-local variables start at 0 on Mesa drivers only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:11:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9dd50131ca Start function-local variables at 0 on Mesa drivers only
SPIR-V leaves a register read before any write undefined and Mesa folds undefined values freely. The unconditional patch 0014 guarded against that and was taken out in #701 because the whole picture shook with DLSS on NVIDIA. Patch 0016 brings the zero start back behind a zero_locals job flag, which vk_caps_driver turns on for RADV, ANV and NVK. TOTK_ZERO_LOCALS overrides it, and gfx_shader_set_host mixes it into the translator identity so the variant has its own cache keys.

FXAA_FS gains the flag-on hash of the game's FXAA shader, so vk_dlaa_skip_draw knows it on Mesa too. A game run with TOTK_ZERO_LOCALS=1 on an RX 9070 produced that hash; a TOTK_FXAA=0 run logged no skip with either hash, so the switch itself is not confirmed.

All 29736 stored 1.4.3 inputs translate with the flag off and on, 0 spirv-val failures. FXAA hashes to 5c43ae18948d52cb with the flag off and aad42238801d31d8 with it on. Flag-on output matches the old translator byte for byte on a sample of 312 shaders. Not run on a Mesa driver.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:05:21 +03:00
Valiantsin Dzerakh b8d5c08cf4 Merge task/hifps: 1.2.1 map cursor and vertical aim follow the frame time (#44) 2026-11-04 17:48:48 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0e1ddb41e0 Scale the 1.2.1 map cursor and vertical aim steps by the frame ratio
The map cursor, the vertical Ultrahand aim and the vertical gyro aim moved a fixed step per frame, so above 30 fps they ran faster with the frame rate (#44, #394). The new set cursor multiplies each step by the game's own 30 Hz ratio, ported from MacNativeGames 363a6eb and switched by TOTK_HIGHFPS_FIX.

Map pan with the same stick input on 1.2.1: 398 px/s at 30 fps, 1150 px/s at about 105 fps before, 402 px/s after. The Ultrahand and gyro sites were not exercised in game. 1.1.0 is not covered: its module is not available here to check the sites.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:48:48 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5e44a5fc5e Merge task/grassfire: write grass maps back at fence waits so fire spreads through grass, and batch the copies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:03:20 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3ae9e8360d Merge pull request #701, translator patch 0014 out so DLSS stops shaking the picture (itaskaev2)
Measured on an RTX 4080 SUPER by the author: shift 0.86 px a frame with the patch, 0.00 without it.

Review note: 0014 alone moves the SPIR-V hash of the game's FXAA shader from 5c43ae18948d52cb, which is in FXAA_FS
(runtime/vk_dlaa.c vk_dlaa_skip_draw), to aad42238801d31d8, which is not. With the initializers removed and the id gaps
closed, the 0014 build's shader disassembles identically to the pre-0014 one. So since c0e66fe the FXAA list matched
nothing, and this merge makes it match again, which also brings back fxaa = 0. The hash miss is the likely cause of the
shake rather than a driver reaction to OpConstantNull, but the path from the missed skip to the screen is not traced and
no RTX run checked it. Not run here: translator build, game run.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:00:45 +03:00
Valiantsin Dzerakh 74058ac053 Merge branch 'dev' into task/grassfire 2026-11-04 16:49:47 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1a9d089a3d Write grass maps back at fence waits so fire spreads through grass, and batch the copies
TotK's fire spread reads its 260x260 RG8 grass maps after a fence wait with no invalidate. The fence write-back took targets up to 64 KiB only, so the CPU saw stale maps and fire died where it hit (#132).

A target over wb_fence_limit now goes back unless the GPU drew it in each of the last 16 frames. Raising the limit instead pulled in four 256x256 targets drawn every frame, about 2.7 ms a frame.

Every level and layer of every texture in a write-back now shares one upload batch and one wait. A burst of 9 grass maps took 7.8 ms with one round trip per level and takes 2 to 2.5 ms. The fence write-back on the field replay fell from about 45 to 22 ms per second of play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:49:46 +03:00
itaskaev2andClaude Opus 5.5 3fab752a21 Take out translator patch 0014 so DLSS stops shaking the picture on NVIDIA
Patch 0014 gave every function-local variable of a translated shader an OpConstantNull initializer. On an RTX 4080
SUPER with game 1.4.3 that made the whole picture move by about 0.9 output pixels a frame whenever DLSS or DLAA runs,
with a still camera (#612). The shake follows the DLAA jitter (TOTK_DLAA_JITTER=0 removes it) and goes away with the
v0.3.7 runtime and a translator built without this one patch. Patches 0012, 0013 and 0015 stay.

docs/maxwell.md 3.12 now says that registers read before any write have no fix for now; a zero start for Mesa only, or
for the shaders that need it, is still open.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 13:35:46 +01:00
Valiantsin DzerakhandClaude Opus 5.5 6c19856136 Merge task/fuseicon: wait for the pipelines of item icon captures instead of skipping their draws
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:33:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a248cc9f54 Wait for the pipelines of item icon captures instead of skipping their draws
The icon capture draws into a colour target rendered for the first time, with the per-frame depth buffer. Under
pipe_skip any and fullscreen the recent depth made the pass look per-frame, so draws with a pipeline still building
were dropped and the icon kept missing parts (a fused weapon without its blade) until the item was captured again.
vk_exec_targets_recent now ignores a recent depth target while a colour target is rendered for the first time.

On fight2 with a warm driver cache no draw waited. With a cold cache the first world frame after loading waits for
the scene's new HDR target (2.9 s without prepared shaders), and one 64x64 capture waited 29 ms in the fight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:33:07 +03:00
Valiantsin DzerakhandClaude Opus 5.5 2201a4f1bc Merge task/pinleak: free texture pin copies once no recording names them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:13:23 +03:00
Michael Anthony Bitoon cd32de5ff9 Keep DLSS off the inventory screen and on at every camera angle, with the scope or the camera rune open
The inventory's preview light target is drawn without depth before the bloom chain; a pass like that with nothing armed ends the scene once the bloom follows, so DLSS no longer runs on the finished menu picture. Arming on that target stays allowed, because at some camera angles the field's effects composite comes before the first pass with the scene depth. The G-buffer width is the widest of the frame, a small pass ends the scene only into a scene colour target, and no pair narrower than the widest G-buffer arms: with the scope open the half-size effects pass armed and DLSS scaled the effects into the light target.
2026-11-04 20:01:27 +08:00
Valiantsin DzerakhandClaude Opus 5.5 a1964a0c31 Free texture pin copies once no recording names them
Every texture initialization got a 128-byte host copy for recordings to point at, kept for the whole run. The game
initializes its transient targets again every frame (about 29 new copies a frame on 1.4.3), so host memory grew by
about 44 MiB per minute of play, standing still too, until the commit limit ended long sessions (#670).

Each pin now counts the recording copies whose ops name it: counted in flatten_recording, uncounted when a copy or a
per-submission clone is freed. A pin with no copy left is freed NVN_PIN_AGE (1200) submits after its last use, so a
recording still in progress keeps its pins, and never while the replay holds it as a current render target, which
carries over to the next submission and is compared by pointer. TOTK_PIN_SWEEP=0 keeps every copy.

A 300 s standing-still run on the field save: host memory without VRAM grew 5 MiB, against about 220 MiB before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:00:36 +03:00
Valiantsin Dzerakh d5e5a454ce Merge branch 'dev' into task/wbmerge
# Conflicts:
#	runtime/cfg.c
2026-11-04 14:09:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 681ce0cb3b Merge task/relsrc: ship every install-time runtime source in the Windows release
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:14:44 +03:00
Valiantsin DzerakhandClaude Opus 5.5 38e2ae1b15 Ship every install-time runtime source in the Windows release
make_release.py copied a hand-written list of the sources build_game.py compiles at install time and missed
mouse_direct.c, so the 06005d4 installer failed to link with undefined input_direct_mouse_* symbols. It now copies
build_game.INSTALL_SIDE, and build_game.py --runtime-lib stops with the missing file names before the link.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:12:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 06005d40d8 Merge task/pgo: build the game code with an execution profile from the release
1.4.3 profile-guided build: fight2 -12.5% per frame, a fight outside the training -5.8%. The profile lives in
build/pgo (not in the repository) and ships in the Setup's data/; installs without one build at -O1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 11:08:02 +03:00
Valiantsin DzerakhandClaude Opus 5.5 282130a128 Build the game code with an execution profile when the release has one
build_game.py --pgo gen builds an instrumented totk.exe (llvm-mingw: MSYS2's clang has no profile runtime) that adds
its counts to <out>/pgo/*.profraw every minute and at exit; plat_exit ends the process with ExitProcess, which skips
compiler-rt's atexit write. tools/pgo.py merges them into build/pgo/pgo-<ver>.profdata with a record of the recomp/
tree it fits. build_game.py --pgo FILE compiles the generated code at -O2 and the runtime with that profile.

make_release.py ships build/pgo's profiles in data/ and builds the runtime libraries with them; the installer passes
the update's profile to build_game.py, and builds at -O1 without one. Profiles name lifted functions by address and
hold branch counts and control-flow hashes of the generated C, no bytes of the game.

1.4.3 on machine A, mean frame by world clock: the fight2 bench 11.49 -> 10.06 ms (-12.5%), a fight outside the
training 13.00 -> 12.24 ms (-5.8%); every window CPU-bound. The profile was trained on scripted runs and 24 minutes
of play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 11:04:31 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4b712a83e4 Log the port and game version at the top of totk.log
Two reports today attached a log from another build than the one they were about: #659 a 0.3.4 log for a 0.3.7
regression, #683 a pre-0.1.6 log from a folder named after the 0.3.7 setup. Telling that needed matching log
strings against release tags. The line follows mem_init, the first point where rt_log may run, so it is the second
line of the file after "cfg: read".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:58:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7be68ec5e1 Turn replay_async off by default again
83d2302 turned it on from one measurement where the game waits for the GPU (a GTX 1650 in the Depths, #88).
Nobody checked frame pacing at the 60 fps cap with GPU headroom or on a 6-thread CPU. #659 (GTX 1660 Ti,
i5-9400F, GPU at 26 %) reports uneven motion on 0.3.7 at a steady 60 fps that 0.3.4 did not have, and this
is the only change in the frame path between the two releases that reaches that machine. Players it helped
set replay_async = 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:50:38 +03:00
Takeya SaitoandClaude Opus 5.5 d3f841a737 Keep the Recall reticle and gauge over their target on wide and tall game resolutions
At a game resolution wider than 16:9 the ability reticle and the Recall progress ring sat between their target and the
middle of the screen (at half the distance on 32:9). Both are moved in code to a point in the 1920x1080 grid on a pane
under the root, so the root's scale k scaled their position too, like the markers in MARKER_ROOT.

Pointer_00 and ModorecoGauge_00 join MARKER_ROOT:
- Pointer_00: the code moves N_App_00. Its children's scales are animated, so k goes on N_App_00 itself (a pane's
  own scale doesn't scale its translate), and on the centred bow and throw pointers N_Arrow_00 / N_WeaponThrow_00.
- ModorecoGauge_00: the code moves N_Trans_00 and sets its scale by distance, so k goes on the ring's pictures. They
  ship mirrored at -1 and are turned only 0 or 180 degrees, so apply() now accepts a shipped scale of -1 and keeps
  its sign.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 07:43:34 +00:00
Valiantsin DzerakhandClaude Opus 5.5 06c5de23fc Merge task/kbm: keyboard and mouse like a PC game on 1.4.3
Direct mouse camera (#558, default on 1.4.3), mouse in the game's menus (#605), keyboard and mouse prompts
(#585, prompts = pc, in place of #483), a shake key (G) for detaching fused parts. The gamepad path is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 09:26:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9e5a817916 Read the mouse mode with its default so direct is on without a totk.ini line
direct_mode read TOTK_MOUSE_MODE with cfg_get, which is NULL when the player never set it, so a fresh totk.ini kept
stick emulation (and its speed cap) while the menu showed Direct. cfg_value gives the settings table's default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:52:06 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5ae81ba8e6 Fix the left stick HUD images of the PC prompts and draw the shake key
In the 1.4.3 Common archive Nt_KeyTexLSt_00 is the left stick tilted up (U+E052) and Nt_KeyTexLSt_01 the left stick
(U+E05E): they showed WASD and Ctrl, now W and WASD. U+E068 (the right stick shaken) showed the mouse, which never
shakes the stick; it shows the SHAKE key (G by default).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:44:55 +03:00
Wintego cb628b08b7 Add keyboard and mouse button prompts (prompts = pc)
The Button prompts row gets a third choice, PC: every button glyph of the game's button font and every image of the
button guide is drawn as the key or mouse button the keyboard defaults press it with (E, Shift, Space, left click, Q,
R, right click, F, Tab, M, 1 to 4, W A S D, Ctrl, C) and the right stick as the mouse, whatever the pad layout. The
setup writes romfs-patches-pc next to the Xbox folders (make_romfs_patches.py --prompts pc, button_icons.py pc_icons);
--binds <totk.ini> draws the keys of its bind_ lines instead. At a game resolution of another shape the game takes
romfs-patches-pc-<w>x<h> (--prompts pc --aspect) in place of romfs-patches-<w>x<h> when it is there.

(cherry picked from commit 3f81cf02be664100bd9c569c53588d620d90b527)
2026-11-04 08:36:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 56b3cd1246 Drop the keyboard prompts of #483 in favour of #585
#483 draws the stick glyphs on the wrong code points: U+E056 and U+E057 (the stick presses) get WASD and the mouse,
U+E05E and U+E05F (the sticks) get Ctrl and C, and both left-stick HUD images show Ctrl. #585 maps them by the game's
font and keeps each glyph's advance.

This reverts commit cd35ffa.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3676e299c5 Add a shake key that detaches a fused part held with Ultrahand
G (bind_SHAKE, keys only) swings the right stick left and right for 0.8 s, longer while held, so a part comes off
without shaking the arrow keys by hand. The pad keeps shaking its own stick. Remappable in the Controls tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:12 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d0579731c5 Make the direct mouse camera the default and add a Controls row for the menu pointer
mouse_mode now defaults to direct: on 1.4.3 the camera turns by the raw mouse motion; 1.1.0 and 1.2.1 have no hooks
and keep stick emulation, and no setting changes the gamepad. The Controls tab gets a "Mouse in the game's menus" row
for menu_cursor, and the mouse rows are in all four catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:18:29 +03:00
0xEmz cd35ffaf36 Show keyboard and mouse icons in the prompts when prompts = keyboard
Add keyboard and mouse button icons to tools/button_icons.py and
tools/make_romfs_patches.py --prompts keyboard, with a third 'Keyboard
and mouse' choice under Controls > Button prompts (prompts = keyboard).

Keycaps cut their labels out of the game's own text fonts, mouse clicks
and right-stick camera look draw clean mouse silhouettes, and
make_romfs_patches.py --ini reads any bind_ overrides from totk.ini.
2026-11-04 08:11:06 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ff49f6b62f Keep the gamepad unchanged under the direct mouse and the menu pointer, and fix the mouse activity flags
The camera input's activity hook wrote the flags to +0x418, but the game's next instruction stores w8 over them
(1.4.3 main+0x874d80), so a mouse-only turn still read as idle. The hook now changes w8.

The free-orbit hooks rewrote the camera stick input from the last sample even in steps without mouse motion; they now
take a step only when the mouse moved in it or holds the pitch, so a gamepad-only step reaches the camera as the game
made it.

The mouse shake gesture for detaching parts is gone: three 24-count reversals fire while a held object is turned back
and forth. Arrow keys or the pad's right stick shake as before.

The menu pointer comes only while the keyboard and mouse are the device used last (input_kbm_last): a gamepad player
sees the menus as on the console. Raw mouse travel is counted while the cursor is released too, so moving the mouse
brings the pointer back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:10:59 +03:00
local 8ff29be86f Use the mouse in the game's menus on 1.4.3
While one of the game's menus has its focus box (the title, the save list, the inventory, Options, shops,
dialogue choices), the cursor is released from the mouse camera and shown; the item under the pointer takes
the focus as the d-pad would, a left click is A on it and a right click is B. runtime/menu_cursor.c reads
eui's screens at each pad read and moves the focus with the writes eui::BoxCursorMgr::moveBoxCursor makes,
adapted from Weeping of the Empire's totk_menu_cursor.cpp (1.0.0, MIT), with eui::ScreenMgr's instance placed
in 1.4.3 at main+0x3acf960. menu_cursor = 0 turns it off.
2026-11-04 07:56:03 +03:00
walterwhite69420 050563687b Add experimental direct mouse camera input for game 1.4.3 2026-11-04 07:55:49 +03:00
ProSepandClaude Opus 5.5 47eed81122 Add the Portuguese and Chinese texts of the distant detail settings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 00:08:28 +01:00
ProSep 4403a3f8ea Merge remote-tracking branch 'origin/dev' into distant-detail-merge
# Conflicts:
#	recomp/patches-v121.txt
#	recomp/patches-v143.txt
#	runtime/cfg.c
#	runtime/ui/menu.cpp
#	totk.ini.example
2026-11-04 00:08:28 +01:00
ProSepandClaude Opus 5.5 3cd241071a Check the movie picture fit against gradients and make it cheaper
The probe now feeds gradient planes and checks bar symmetry, the picture's shape on screen, black outside the picture
and the expected luma and separate U and V samples, with one cleanup path. The timing loop runs only with
TOTK_PROBE_MOVIE_BENCH. In the decoder, a plan made for another frame size is never used, an allocation failure is
logged, only the bar strips are filled with black, and the 3 and 4 tap filters are unrolled, which halves the cost.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 23:41:10 +01:00
ProSepandClaude Opus 5.5 8a8ef05241 Keep the shape of the pre-rendered movies on outputs that are not 16:9
The game stretches each decoded movie frame over the whole canvas, so the 16:9 movies were stretched on 32:9, 21:9 and
16:10 outputs. The host decoder now shrinks the picture inside the frame with a box filter and fills the rest with
black, so that the game's stretch gives the picture its own shape back. The new setting movie_aspect (TOTK_MOVIE_ASPECT,
keep or stretch, read when a movie starts) turns it off, and the menu has a row for it next to the picture shape.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 23:27:39 +01:00
mrtink125792andClaude Opus 5.5 1c5c6fdbe3 Let a finalized texture slot follow only a live entry of its own texel format
slot_resolve sent a slot whose entry was released to any live entry at the same storage, whatever its
format. The quick menu samples its 768x432 RGB10A2 scene capture through such a slot; after a fuse the
Autobuild thumbnail of the fused object, RGBA8 at the same storage, was the live entry there, and the menu
drew it behind the wheel for its opening frames: the fused object's silhouette, or garbled colours when the
thumbnail image held the capture's raw bytes. Maxwell reads the storage through the slot descriptor's
format, so a follower now needs the slot's texel format (sRGB aside); without one the released entry keeps
the slot, and its image is the capture the game last wrote.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 16:53:46 -05:00
ipavlin98 23d24bbc77 Report heap corruption from the vectored handler
The heap manager raises STATUS_HEAP_CORRUPTION and then ends the process itself, so the exception never reaches the unhandled-exception filter, and a run that corrupted its heap ended without a FATAL line. crash_veh hands it to crash_filter, which names the module and the host frames as for any other fault outside the executable.
2026-11-03 23:15:59 +03:00
ipavlin98 6ac2da7e8f Add a frame queue that frees a window image at its display time
nvnWindowAcquireTexture holds the game until the image is free, which was one period after its present's display time, when the next frame reaches the display. The present is a copy queued by then, so with frame_queue = 1 the image is free from that time: the game draws the next frame while the previous one waits for its turn, and a frame that takes up to one period more still makes its slot. In the town at 4K at 60 fps on an RTX 5070, frames over 17.5 ms fell from 25-33 to 1-8 per 30 s, for up to one frame more input delay. Off by default; the menu switches it at once.
2026-11-03 23:13:41 +03:00
ipavlin98 b3f162746d Clear the swapchain's stale mark before reading the surface so a resize during the build is not lost
The mark used to be cleared after the swapchain was built, which dropped a resize that arrived meanwhile. The switch to fullscreen at start lands there on the window thread, and the driver does not report the swapchain as out of date.
2026-11-03 21:38:15 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0f65b4ee07 Show the game and port versions in the Discord status
The details line read "Update 1.4.3"; it now reads "Game 1.4.3 · Recomp 0.3.7".
The port version drops its +commit suffix there, the art's hover text keeps
the full one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v0.3.7
2026-11-03 20:56:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1ec1e21d77 Use the project's own Discord application for Rich Presence
The default app id pointed at the application the feature was developed
against, owned by the pull request's author. The new one belongs to the
project, with the ring icon uploaded as the totk_512x512 art asset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:49:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f0fe1e56e3 Merge task/surround51: 5.1 surround output (#438), stereo by default
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:36:18 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1e378dd177 Keep stereo as the default speaker output
With audio_channels = auto as the default, a player whose Windows device reports six or more channels gets 5.1
without asking for it. USB headsets with virtual 7.1 and HDMI receivers or TVs set to 5.1 or 7.1 report that too,
though many of their owners listen in stereo. Stereo as the default keeps today's sound for everyone; 5.1 and auto
stay in the Sound tab and in totk.ini.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:35:52 +03:00