The camera view draws a half-size RGBA16F target with a half-size D32F depth after the lighting (852x480 under a
1704x960 scene). It matched the light target pattern, so the DLAA point re-armed on it and DLSS scaled it into the
scene's own light target, which left every object black. An armed pair is no longer replaced by a smaller one, and
the scaling pass DLSS writes into must have the output size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a DLSS mode the game's own scaling draw covered DLSS's picture with the jittered scene. At a 1280x720 scene and
1920x1080 output the scaling is done by the game's tonemap, not by the FXAA shader vk_dlaa_skip_draw looks for, so no
hash list could catch it. From DLSS's evaluation to the frame's end, passes larger than the light target now sample
DLSS's output in its place (vk_dlaa_swap_img, applied in vk_exec_draw.c tex_info), whichever shader scales.
The motion-vector shader inverted the view-projection in 32-bit floats. With a still camera (identical matrices each
frame) the rounding still gave a few hundredths of a pixel of motion that changed with every jitter step; DLSS
followed it and the whole picture wobbled. mv_pass now makes last frame's view-projection times the inverse of this
frame's in double precision from the uniform snapshot (vk_usnap_host), and the shader only applies it.
Measured on 1.4.3 indoors, still camera, mean per-pixel change between consecutive frames on static areas:
DLSS quality 0.18 -> 0.06, DLAA 0.14 -> 0.05. A camera pan at 10 px per frame shows no ghosting.
Some frames the game upscales its tonemapped scene with its own FSR 1 pass instead of the plain upscale, and that
shader clamps each channel to 0..1, so with TOTK_HDR=1 every highlight above the HUD's white is cut back to it: around
the sun the glare turns into a flat grey-white patch that stays until the camera moves. vk_hdr.c fsr_unclamp finds the
shader by FSR's two reciprocal constants and drops only the clamps whose result goes to its output, leaving the
filter's own weight clamps alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mod's folder name is drawn on the Mods tab (opt_text_row, menu.cpp) and as the Cheats tab's group heading (cheats_tab.cpp), and it comes from disk at runtime like a cheat name, so its glyphs were never in the atlas either.
Both sources are added in the same place in fonts_up(), so one pass covers the whole menu.
After the in-game menu or the text entry closes, input_poll kept the game's input blocked until one poll saw no
button and all four stick axes at 0. An input that never reads as released (a button another program holds down, a
key whose release went to another window, a stick resting outside its dead zone) kept the game deaf until restart
(#462, #494). Closing with Minus+Plus hid this: that poll zeroes the pad before the gate looks. Closing with Esc did
not. The wait now ends after 1 s with input held, and the log names what was held.
Repro: field save, a script holding the right stick at 3000, Esc opens and closes the menu, left-stick pulses after.
Before: 0.00 m/s for the 30 s after the close. After: Link walks from the second poll window on; the log line reads
"input: the menu closed 1 s ago and input is still held (buttons 0, sticks 0 0 3000 0)".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Releases before 0.3.1 recorded the 0x20000 update as 1.1.1. After the rename (#371) nothing mapped the recorded
name, so an update of such an install asked make_romfs_patches.py for --version v111 and failed at the end (#332);
in a fresh setup folder it would not find expected-v1.1.1.json at all. migrate_state maps the old name before the
plan and gives the extract record the key of the renamed expected file; the full check of kept output still hashes
the extraction against it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The motion vectors follow the camera only, so a character, animal or held item that moves on its own drags a faint
copy of itself through DLSS's history. TotK's G-buffer target 0 carries an object class in green: above 64/255 for
characters, creatures and held items (Link 253, others 125, held items 160), 0 for terrain and 32 for foliage, checked
in the field, in Goron City and on horseback. The motion-vector pass now also writes DLSS's bias mask
(DLSS.Input.Bias.Current.Color.Mask) where such an object is now or was the frame before, read through the motion
vector from the previous frame's class mask, so the history that holds the moving object is weighed down there.
dlss_char_mask (0, 35, 65 or 100 percent, default 65; F1 > Screen > "DLSS character trails", live) sets the strength.
A 640x360 pass of the G-buffer's shape, seen while loading, no longer replaces the scene's class buffer in a frame.
The status line also prints after 300 frames, with the frames that had the mask.
dlss_preset (default, k or j; F1 > Screen > "DLSS model", live) sets the render preset hints when a DLSS feature is
created. default leaves the choice to NGX (preset K for DLAA, Quality and Balanced in the 310 releases); j is the
transformer model NVIDIA describes as slightly less ghosting at the cost of more flicker. A change recreates the
features at the next DLAA run. FrameTimeDeltaInMsec now carries the time since the previous evaluation instead of a
fixed 16.67 ms. The menu and totk.ini.example name the DLSS model file of the platform in use.
vk_dlaa.c reached the NGX core only through Windows: the registry, LoadLibraryA and GetModuleFileNameW. On Linux the
NVIDIA driver installs the core as libnvidia-ngx.so.1 with the same Vulkan entry points; it is opened with plat_lib_open.
The parameter object's vtable follows the Itanium C++ ABI there, each overload group in declaration order rather than
MSVC's reverse order, so the slot enum has a Linux variant; vtable_ok confirms it at start. NGX gets the executable's
folder as a 32-bit wchar_t string, converted from UTF-8 without the C locale, and loads libnvidia-ngx-dlss.so.<version>
from there. The Windows path is unchanged.
resolution.c sized the scene for a DLSS mode only on Windows, where it looks for nvngx_dlss.dll; on Linux it now looks
for libnvidia-ngx-dlss.so.<version> next to totk, so quality, balanced and performance work there too. The no-op
stubs vk_dlaa.c had for other platforms go, as Linux now builds the real code.
The marker fix gave the root's scale of BalloonMessage_00 to its part pane Pa_BalloonMessage_00. The game pools that
part, cloning it into Pa_BalloonMessage_%02d at run time, and the clones don't keep the template pane's scale, so on
32:9 NPC speech balloons drew twice as wide as they should.
The scale now goes inside the part layout instead, to the top panes of PaBalloonMessage_00 (C_CaptureBase_00 and
N_InOut_00, their offset scaled with them), which every clone is built from. Its animations only key alpha, visibility
and N_Loop_00's y. The part pane keeps scale 1. Same on the y axis for 16:10.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In mirror mode the replay copied every range a shader wrote from the VRAM mirror back to guest memory at the end of the
submission. TotK's particle emitters write a new particle's whole record into a free slot of a buffer the simulation
shaders update, so the copy put the mirror's stale words over fresh spawns: the waterfall splashes and mist showed about
once a second and the falling rain drifted. Now each written range gets a snapshot in the prologue of the part that
first writes it, after the CPU-to-mirror copies, and at the end of the submission shaders/wb_merge.comp writes only the
32-bit words that differ from the snapshot. Words the GPU left alone keep what the CPU wrote. About 0.1 MiB and three or
four dispatches a frame in rain. TOTK_WB_MERGE=0 restores the copies. The merge's push descriptors go through rec_push
so they keep their place in the recorder's call order.
The check step tells a compressed file by its content (an NSP or XCI holding NCZ files), whatever its name, and
unpacks it into the temp folder with tools/ncz.py before the extraction reads it. Every NCA comes back byte for byte
and is checked against the hash in its name. The file dialog has one filter for all game files, and the form says
that compressed files are unpacked automatically, in every setup language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The device sink loop now writes every output channel; upstream's TOTK_AUDIO_DUMP gets the front pair before clipping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While TotK waits for a tag it stops and starts detection several times a second, tens with the menu open: the Amiibo
tab's reader line flipped between ready and searching and the log took two lines per restart. The tab now shows
searching for a second after a stop (amiibo_get_reader_state; the game still reads amiibo_get_device_state), and the
log names the first three restarts, then a count every 200th.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Amiibo tab's folder field took no typing: the menu never passes typed characters to Dear ImGui, so "Open" only
re-read "./amiibo". A missing folder said so at the bottom of the right pane, below its scroll.
"Open" now shows the shell's folder dialog on Windows (IFileOpenDialog on a thread of its own, owned by the game
window) and SDL_ShowOpenFolderDialog on the SDL window thread elsewhere; the tab shows the folder as text and names a
missing one inside the empty list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DLSS modes already apply only with dlaa on (3de0839), so the DLL check no longer looks at dlaa, and off Windows,
where vk_dlaa.c is no-op stubs, a DLSS mode no longer shrinks the scene. fxaa = 0 names the FXAA shader it skipped,
or reports a minute of frames without it, so a translator change that moves FXAA_FS shows on any GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a DLSS mode (a scene smaller than the output) DLSS writes the scaled picture into the scaling pass's target and
vk_dlaa_skip_draw skips the game's own scaling draw, known by its fragment shader's SPIR-V hash. Translator patch
0011 (the shadow filter spread) changed that hash, so the draw ran again and covered DLSS's picture with the scaled
jittered scene: the whole picture shook by a fraction of a pixel each frame, most visible on lit flat surfaces in
shrines. The FXAA switch (fxaa = 0) stopped working for the same reason.
Add the hash of the current translator, and log once when DLSS scaled a frame whose scaling draw was not found, so
the next translator change that moves the hash shows in the log.
Measured on 1.4.3, Ukouh Shrine, output 3200x1800, dlss = quality, mean absolute change between consecutive frames
with a still camera: 1.40 before, 0.07 after (0.054 with dlaa = 0). Outdoors on stone: 4.29 before, 1.08 after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A DLSS mode (quality, balanced, performance) shrank the scene to 67, 58 or 50 % of the output and sharpened the
material textures' mip bias to match, even when nvngx_dlss.dll was missing and NGX reported DLSS as not available.
The game's plain scaling then stretched the smaller scene, and the negative bias made textures shimmer in motion.
With dlaa = 1 the scene size now waits on nvngx_dlss.dll next to totk.exe (checked before the device exists, as
the size is decided then) and follows render_scale without it. The mip bias applies only when NGX came up with
DLSS. dlaa = 0 keeps the documented size with the game's scaling, without the bias.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tex_mirrored (vk_texture.c) read t->pool->flags whenever the back end created the host entry of a texture, which can
happen long after nvnTextureInitialize. A game may finalize a memory pool and free the memory the NVNmemoryPool object
lived in while textures from it are still looked up (on a level change, for instance); reading the freed object then
faults. The NVN driver keeps no pointer to the pool either. tex_t now records the pool's flags at Initialize, in the
padding after layout[8], so NVNtexture's size is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Device-paced frames rendered back to back after each period pull (1024
samples on PipeWire, 4-5 frames), before the game's audio thread could
clear the render event or fill the AUX return ring. Frames now stay at
least 4/5 of a frame apart, as the DSP renders one frame every 5 ms on
hardware. This fixes AUX clicks at frame seams (#426) and the progressive
sound loss of #131 (overlapping render notifications 52.7% -> 0.1%).
Linux prefill default raised to 60 ms: at 20 ms PipeWire underran
thousands of times within minutes in busy scenes.
The reverb ring (#421) and advance_voice stepping parts of this change
landed in dev separately (d22a19c, b44caca).
Fixes#131
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wide and tall UI overlays scale each layout's root pane on the stretched axis. The lock-on arrow, the name label
of the item or character in front of Link, enemy life bars and notices, and speech balloons are moved in code to the
target's projected position on a pane under that root, so the position was scaled as well: on 32:9 these markers sat
at half their distance from the middle of the screen, short of what they point at.
Those four layouts keep their root at scale 1 and give the scale to the panes under it that the code does not move and
no animation scales, so the markers land on their target and keep their 16:9 proportions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_REC_CHECK=1 searches the packets of the part being recorded for each image, view and buffer vk_memory.c defers or
destroys. A deferral stamped below the part's value, or a destruction of an object a packet names, is logged with the
packet op, both stamps and the GPU's value, and counted by kind and op in a summary at exit. put() zeroes each packet's
room while the check is on: packers reserve room for optional arrays they may leave unwritten, and those words held
handles from the ring's previous lap. TOTK_REC_DELAY_US=N makes the recorder wait N us before each batch, as on a slow
machine. rec_begin takes the part's value for the check. Both are off by default; off, the recorder pays one test per
batch and per packet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_memory.c defer stamped every deferred image, view and buffer with the last submitted timeline value. An object the
replay lets go of while it records a submission can be named by that submission too: vk_texture.c slot_resolve hands a
draw a released entry, and entry_of destroys released entries at that address later in the same submission. The
completion thread then destroyed the object once the GPU reached the earlier value, before the submission naming it
ran, and with the recorder thread behind, before the recorder made the call. The stamp is now the later of the last
submitted value and vk_exec_recording_fence, as LAS Recomp and Savage Wind Recomp stamp their deferrals
(runtime/nvn/vulkan/textures.c defer). TOTK_DEFER_STAMP=0 brings back the old stamp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
-march=x86-64-v2 does not reach inline assembly, target attributes or intrinsics, which is how kern_ap_stub's YMM
saves got into libtotkrt-v2.a (issue #454). tools/check_isa.py disassembles objects and lists every function with
VEX/EVEX, BMI1/2, LZCNT, MOVBE, ADX, SHA, AES, PCLMUL or RDRAND/RDSEED code or YMM/ZMM/mask registers, except
functions in its DISPATCHED list (sha256.c blocks_ni, behind __builtin_cpu_supports). build_game.py --cpu v2 runs it
over the runtime objects after compiling and before linking or archiving, so make_release.py's v2 library build fails
too. Objects unchanged since the last clean scan are skipped; a full scan of the runtime takes about a second. The
release ships the script, and the installer's runtime fingerprint includes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The asynchronous preemption stub saved and restored YMM0-15 with vmovdqa and ran vzeroupper in inline asm, which
-march=x86-64-v2 does not reach. The v2 runtime library therefore carried VEX code, and a CPU without AVX stopped
with an illegal instruction the first time a core owner was interrupted, a few seconds into boot (issue #454,
Pentium Gold G6400, totk+0xe7a2b50 = kern_ap_stub+0x20). Without __AVX__ the stub now saves XMM0-15 with movdqa into
the same slots; v2 game code keeps nothing in the upper YMM halves. The v3 stub is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD buffer marks at every replay pass and dispatch, on by default (fight2 off/on x2: 89.45 vs 89.6 fps, no new slow
frames); NVIDIA diagnostic checkpoints with TOTK_PASS_CRUMBS=1, compiled but not run here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The replay marks the start and the end of every render pass and dispatch
(vk_exec.c vk_exec_pass_begin and vk_exec_pass_end, vk_exec_draw.c
op_dispatch and op_dispatch_ind), outside the pass so no pass is broken.
With VK_AMD_buffer_marker the GPU writes the last started and finished mark
into words 2 and 3 of the breadcrumb buffer; with
VK_NV_device_diagnostic_checkpoints the same points are checkpoints, read
with vkGetQueueCheckpointData2NV after the loss. A ring of 4096 records maps
a mark to its submission, index, target formats and size, draw count and the
input ids of the first and last draw's shaders. vk_device_fault_report logs
both marks with their records. The calls go through the recorder thread.
TOTK_PASS_CRUMBS (menu: GPU pass marks): unset, AMD buffer marks only; 1,
also NVIDIA checkpoints, whose extension is enabled only then; 0, none.
The design follows Savage Wind Recomp 3fae40c; the code is ours.
--probe-vkexec gets a pass marks part: pass, dispatch, pass in one
submission; the marks read back after the fence name the last pass and the
report text says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zero-byte NVN pools get no Vulkan record, WaitSynchronization keeps a pending cancel for the next blocking wait,
SignalToAddress subtracts 2 when it wakes all waiters, and the 1.2.1 texture loader widens pool offsets unsigned.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The loader keeps a texture's place in its pool as a 32-bit word (main+0xad4294) and widens it with a sign extend for
nvnTextureBuilderSetStorage's offset (main+0xad43f0) and for SetPackagedTextureData's source (main+0xad440c). Past
2 GiB the offset turns negative and the storage lands 4 GiB below the pool (MacNativeGames ca311e2d, seen with a 4K
texture pack's heap table in a 3.58 GiB pool). The shipped heap table keeps every pool far below 2 GiB, but
TOTK_APP_POOL raised with such a pack's heap table (RomFS mods replace it) can reach it. The new patch set pooloff
(TOTK_POOL_OFFSET_PATCH, on by default) widens unsigned: the same value below 2 GiB, right up to 4 GiB.
1.4.3 needs no patch: both of its loaders (main+0x583c34, main+0x27ed214) keep the offset in 64 bits (str x25 / mov
x2, x25 / add x1, x25, x8). gen.py accepts both original words, and the lifted C at the sites reads the offset as
uint32_t with the set on and as int32_t with it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>