-march=x86-64-v3 kept the port and the installer to CPUs with AVX2 and FMA. --cpu v2 compiles the generated code and the runtime for SSE4.2 instead. Without FMA3 the FP lowering calls fma/fmaf, so runtime/fma.c provides correctly rounded ones (musl, MIT) that honour MXCSR's rounding mode, FTZ and DAZ; the UCRT's software fallback rounds incorrectly by up to half an ulp. simd.h's fast paths keep their assumptions.
The installer's host check asks for x86-64-v2 and selects libtotkrt.a or libtotkrt-v2.a; both release scripts build and ship the pair. The differential tests compile fma.c as well, so a --cflags=-march=x86-64-v2 run tests it.
Tested on an i7-3770K (no AVX2, FMA or BMI) with an RTX 3060 Ti, game 1.4.3: the installer ran end to end, --selftest passed and play holds 40-60 fps at 1080p. fma and fmaf matched 152,288 exact vectors over two seeds, including ties, subnormals and every rounding mode, FTZ and DAZ combination. The v3 build is unchanged: fma.c is an empty translation unit there.
patches-v121.txt takes the aspect set at upstream's 1.2.1 sites (game_patches.c aspect_install): the same two camera
loads and two viewport divisions as 1.4.3, with the same original words and the same replacement from page +56. The
installer now builds the romfs-patches-<w>x<h> overlays for 1.2.1 too; ultrawide_layout.py passes on its
Common.Product.110 at all ten sizes. Checked in game at 3440x1440 (camera 2.3889) and 1920x1200 (1.6000): wider or
taller view, HUD at the corners or edges, no validation errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
astc_probe.c came from dev with _putenv_s, which the Linux build of the merged runtime rejects. check_platform.py now
flags _putenv and _putenv_s in shared files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ultrawide_layout.py handled canvases wider than 16:9 only, so the Steam Deck's 1280x800 got the 16:10 camera with
the 16:9 HUD stretched 11% over it. A narrower canvas now scales each layout's root pane in y by the aspect over 16/9,
stretches full-screen backgrounds back and moves the HUD to the top and bottom edges. The pane list and distances are
the TALL table of tools/aspect_layouts.py from pull request #60, in the format of the wide edits; the minimap,
discovery banner and dragon's tears keys are found by walking the animation's curves. Every value is checked against
the shipped one before it is written: 1.4.3's Common.Product.140 and 1.2.1's Common.Product.110 pass at 1280x800 and
1920x1200, and the 3440x1440 overlay is byte-identical to the one before.
The settings menu offers 1280x800, 1680x1050, 1920x1200 and 2560x1600, and the installer builds their overlays with the
21:9 and 32:9 ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch forked 79 commits before main and 98 before dev. Resolutions:
1. Aspect ratio: dev's implementation stays (camera patch at page +56 on 1.4.3, tools/ultrawide_layout.py layouts per
size in romfs-patches-<w>x<h>, the aspect = fit|stretch setting). The PR's second implementation is dropped: the
aspect sets of patches-v121.txt and patches-v143.txt (the 1.4.3 one patched the same viewport sites as dev's),
tools/aspect_layouts.py, the resolution.c shapes that limited game resolutions to 16:9, 16:10 and 21:9, and the
picture_fit setting. Its letterbox code (gfx_fit_rect) is kept and reads TOTK_ASPECT.
2. Code dev changed where the PR moved it: the stick dead zone, the test gamepad and the paddles go to input.c; the
DPI awareness, keep-awake and IME detach of gfx_window.c go to gfx_window_win.c; device fault reports and GPU
breadcrumbs to gfx_present.c. gfx_window_dpi gets an SDL version.
3. dev's Win32 calls in shared code go through platform.h: the shader cache pack reader (PlatFile), the romfs
overlay checks, the audio pacing waits, the motion, ASTC and device fault locks. plat_cpu_usable and
plat_commit_info get Linux versions; plat_cpu_count counts the machine's processors on both. dpi_probe.c becomes
dpi_probe_win.c.
4. assume_focus defaults to 1 as the PR has it (a load interrupted by a focus loss can stop for good) and stays live,
with dev's Game tab row.
5. The frame limits 40 and 45 join dev's list. The BC 3D storage fallback for Vega only runs with
TOTK_BLOCK_VIEWS_3D=1, since dev makes 3D BC images without block views by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_VK_DYN_A2C from pull request #188 gets the settings row, the Advanced tab choice and the totk.ini.example
line that TOTK_VK_DYN_VERTEX has. The IME comment in gfx_window.c window_main named a walk key the runtime does not
have, and ov_system.c still said TOTK_ASSUME_FOCUS opens the window without focus, which TOTK_BACKGROUND_WINDOW does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD's RDNA2 driver places the depth compression metadata after the depth data. Above 1080p that tail of a depth
target bound into the game's texture heap lay over the next texture, and every depth write scrambled it: a garbage
band at the top of the screen, a pink glow, blocks in the grass and a blue checkered scene in the menu (RX 6600 to
6800, issue #185). Reproduced at 2560x1440 on an RDNA2 iGPU with driver 26.10.1; all 63 oversize images there were
D16 or D32 depth targets. Colour images keep their place in the pool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Eight places sized a pool (pipeline workers, library prebuild, translator prewarm and seeding, the multithreaded ASTC decoder) by GetActiveProcessorCount, every logical processor of the machine. A process limited with start /affinity, Task Manager or a launcher then started a pool for 16 CPUs on 4. plat_cpu_usable counts the affinity mask (all active processors for a process that spans processor groups); plat_cpu_count, the machine's count, stays for the system info. Idea from MMadmer's UsableCpuCount in a fork of the Shadow of the Colossus PC port.
The game pauses whenever its window loses focus, as it does on the Switch when Home is pressed, and ASSUME_FOCUS was the
only way to change that: a known key with no row in the settings table. The runtime reads it at each focus change rather
than once at start, so the row takes effect the next time the window is left, and the build guide says what an unfocused
window now does.
A lift rewrites every generated chunk with the same contents, so a local sccache hits all of their objects and the
compile step costs seconds instead of minutes. build_game.py writes it into the ninja file ahead of cc when the
environment names one; the build guide describes the setting.
A Chinese IME switched on over the game attached to the window, then showed its candidate window and took the keys it
composes although there is nothing to type into here; Shift, which a player may have bound as the walk key, is one of
the keys such an IME takes. The software keyboard's edit box is a window of its own and keeps the IME it needs, so only
the game's window is detached.
Each form applies its own labels, asks whether the reporter can keep playing,
and requires a check of the pinned and existing issues. Questions go to
Discussions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD's Windows driver branch for RDNA 2 and older (vk_caps.amd_sc, driverInfo
"(AMD proprietary shader compiler)") applies alpha to coverage even while
vkCmdSetAlphaToCoverageEnableEXT sets it to false. TotK never turns alpha to
coverage on (a TOTK_DUMP frame showed it off in all 1170 pipelines), yet on an
RX 590 with driver 24.9.1 the character draws kept their depth and lost their
colour in the G-buffer, so Link and the NPCs were black silhouettes, and other
surfaces were dithered into checkerboards (issue #67, RX 470/570/580).
On that driver branch vk_pipeline.c ensure_init now leaves alpha to coverage out
of the dynamic state, so it goes into the pipeline key as on GPUs without EDS3.
TOTK_VK_DYN_A2C=0/1 (ini vk_dyn_a2c) forces either behaviour. NVIDIA and RDNA 3/4
are unchanged. Tested on the RX 590 with 1.4.3: characters, the checkerboards and
the black blocks all render correctly.
Fixes#67.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DcYzeu7eb2txzmu4brvcgh
tools/ultrawide_layout.py computes every edit from the canvas aspect, so 32:9 needs no new layout data: the installer now builds romfs-patches-3840x1080 and -5120x1440 beside the four 21:9 sizes, and the menu lists both. Before, a 32:9 output_res got the wide camera with the 16:9 HUD stretched over it (issue #181).
SDL does not open the Switch 2 Pro Controller on Windows by itself, so it needs a bridge program. Tested with the
game: hbashton's DS4Windows fork emulating a DualSense gives buttons, rumble, gyro, accelerometer and calibrated
sticks, read directly by the game. Bridges that output a ViGEm DualShock 4 (ProCon2Windows, connectyourpro) give rumble
but frozen motion values, so motion controls do nothing with them. docs/controls.md gets a short section with the log
lines that show a working setup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pane copied each description into 512 bytes. The Russian button layout description is 840 bytes of UTF-8, so it stopped mid-sentence, and the English one (507 bytes) lost the note appended after it. The pane now holds UI_DESC_BYTES (2048), and probe_menu_text checks every English and Russian menu text leaves room for a note.
The swapped letters are baked into the game's textures, fonts and messages, so a button remapped with a bind_ line or on the Controls tab keeps the old letter on screen. The menu description (English and Russian) and docs/controls.md now say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Xbox prompts folder is optional, so a manifest that no longer matches the RomFS logs the reason and drops that folder instead of stopping the game. The main romfs-patches and the mods folder keep their fatal checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
romfs-patches-xbox is optional: when make_romfs_patches.py --xbox-prompts fails (a game update whose prompts it does
not recognise), the setup removes the partial folder, warns (warn.xbox_prompts_failed) and finishes, where it stopped
the whole install before. The game then keeps the Switch prompts and the menu says the files are missing. Its log is
prepare-xbox-make_romfs_patches.log, so it no longer replaces the 60 fps run's log, and Prepare no longer counts the
folder as part of a finished step.
The Xbox button prompts section of docs/controls.md sat between the layout list and the controls table it introduces;
it now follows the table. The building.md note follows the paragraph it interrupted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With pad_layout = nintendo on an Xbox pad the right button does Switch A but is labelled B, the bottom one does B but is
labelled A, and the game's prompts still name the Switch buttons. A fourth Button layout choice, Xbox prompts (A right)
(pad_layout = xbox_prompts), maps the buttons as nintendo and swaps the prompts to the labels, so each prompt names the
button to press. Automatic, Nintendo and Xbox are unchanged and keep the game's own prompts. The buttons change at once;
the prompts at the next start, as the game reads its UI archive and fonts at boot (the menu says so).
At start, xbox_prompts loads romfs-patches-xbox in place of romfs-patches (runtime/romfs.c overlay_init).
tools/make_romfs_patches.py --xbox-prompts writes it from the player's own RomFS, with the 60 fps patches; nothing from
the game or a mod is added to the repository. It swaps A with B and X with Y in:
- the letter images Nt_KeyTexA/B/X/Y_00 of the action prompt (DoCommand_00), in the Common archive's __Combined.bntx
(same format, size and tiling, so the image data trades places);
- the action prompt's diamond of the other face buttons: one-letter text panes the game fills from
LayoutMsg/DoCommand_00.msbt in each language's Mals archive (both the messages and the layout's own text);
- the button glyphs U+E040 to U+E043 of scft/External.bfotf in each Font/Font*.bfarc, which every other prompt uses
(CFF outlines and metrics in the deobfuscated OpenType font, then its checksums).
The diamond's shape shows the button's position and stays. The setup writes both folders; the menu notes when the Xbox
prompt files are missing and when the prompts in use differ from the choice until a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wide sizes other than the four the installer prepares get the wide camera with a 16:9 HUD stretched over it. aspect = fit letterboxes a 16:9 game in a wider window where it used to stretch. Ultrawide is 1.4.3 only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root pane's shipped scale_x must be 1.0 before the tool writes the narrowed scale. A layout or animation member missing from the archive stops with a SystemExit naming it instead of a bare KeyError. The docstring no longer describes nvn_mtl.m's UI squeeze or scripts/ paths from upstream, and says where the pane list and distances come from (the GPL TOTK-Ultrawide mod, values only).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.2.1 has no camera aspect patch, so the installer no longer builds romfs-patches-<w>x<h> for it (the layout tool is checked against 1.4.3 and could fail the whole install), and romfs.c overlay_init skips that overlay on 1.2.1 through res_wants_wide_overlay. overlay_init and res_init now both call res_is_16x9 (1% tolerance), so 1366x768 counts as 16:9 and logs no missing overlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An output_res such as 3440x1440 now widens the camera's view to that shape on 1.4.3: patches-v143.txt
sets the aspect ratio at the camera and viewport sites that hand it to the perspective projection.
The HUD and menus come from a romfs-patches-<w>x<h> overlay that make_romfs_patches.py --aspect
builds through tools/ultrawide_layout.py, and romfs.c overlay_init picks that overlay when the game
resolution is not 16:9. The installer prepares it for 2560x1080, 3440x1440, 3840x1600 and 5120x2160.
When the window's shape differs from the game resolution's, the new aspect setting keeps the
picture's shape with black bars (fit, the default) or stretches it over the window.
A BC3 image takes whole 4x4 blocks or a part ending on the mip's edge; a WriteTexels region of a 5x5 or 6x6 footprint may end inside one. --probe-astc encodes every footprint to BC3 and holds the blocks to alpha, palette-place, flat-colour and PSNR bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>