The game links an actor whose link record is null without complaint, so UltraTears' live-actor test could drop
targets the game handles. A target is now dropped only when the holder, the actor or its component is unreadable, or
the word the game's reference takes (+0x90, an atomic read-modify-write) is unreadable or in a module's code or
read-only data. The live-actor test logs the targets it would reject and changes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Set ability (1.4.3 main+0x1bd01c4, 1.2.1 main+0x1622bf0): the target actor load becomes a host call that reads the
holder safely and drops an actor failing the live-actor test (link record points back and carries its id), as
UltraTears found; the game's own cbz skips it for that frame. The answer comes back in x9, since the lifted code keeps
x21 in a C local across calls. Set report (1.4.3 only): the model scene report loop sends a negative handle or a row
index from 0x8000 to the game's handle reset, the class Weeping of the Empire met (#52, #73). Both on by default,
TOTK_ABILITY_GUARD=0 / TOTK_REPORT_GUARD=0 turn them off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game checks the reference only for null, and players' crash dumps show it holding 0xffffffffffffffff after minutes to hours of play. MacNativeGames met the same field holding 0xffff0000ffffffff during a save load. Set optref (TOTK_OPTREF_GUARD, on by default) turns the cbz into a test for null or negative; valid holders are heap addresses below 2^63.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In the camera (the ability wheel's camera) each notch of the wheel is a 100 ms press of the D-pad's up (in, for a
turn away from the player) or down, the zoom its button guide shows. The camera is found by its open screens: the
Purah Pad's frame and CameraPointer_00 without AppMap_00, which the Scope has (menu_cursor_camera). The Scope has no
zoom of its own, so the wheel stays unbound there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
By default the left button is Y, which opens the dialogue log in a dialogue box. While MessageDialog_00 is open the
left button now presses B, which advances the text and shows the rest of a scrolling line, and the right one A.
Dialogue choices keep the menu pointer, where a left click picks the choice under it, so clicking through a
conversation does not pick the choice the focus starts on. The setting is live and independent of menu_cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wheel did nothing outside the map. Now each notch is one step of the stick a gamepad player would move: in a menu
with the game's focus box (the inventory, shops, Options, the save list) the focus moves up or down, and while a D-pad
strip (weapons, shields, bows, materials) is held open the choice moves left or right. The strip has no focus box
while it is held, so it is found by its open screen, ShortCut_00, as the map is. The wheel now also counts while the
cursor is released over the window, where the menus have the pointer. Input scripts take WHEEL lines and a recording
writes them, and a script's one-shot MOUSE or WHEEL line goes in at the first poll at or after its tick instead of
being lost when a poll skips that tick.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Y has two default keys: the left mouse button, which is a menu's A while the pointer is shown, and T, which presses Y
everywhere. The button font (menu guides, the dialogue log) now shows Y as its first bound key that is not a mouse
button; the button guide in play and the action prompt keep the left button. The PC prompts are a setup step of their
own, keyed by the bind_ lines of the install's totk.ini, so running the setup again after rebinding redraws them
without preparing the shaders again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mod file whose name carries Product.<n> and which the RomFS lacks was counted as made for another game version and
never served. The game does ask for such names: on 1.4.3 with mods on, the file trace (trace = fs) shows it opening
Sound/Resource/Pack_MasterSword.Product.110.bars.zs, while its RomFS holds only the Product.140 and the unversioned
file. A sound mod that ships its pack under all those names was silent here and works on a console, where LayeredFS
shows the game every file of a mod. Such files are now added overlays like any other new file. Another version's
resource size table is still not served and still lends its entries; the files are still counted, and the Mods tab
and docs/mods.md now say they are read only when asked for by name.
tests/mods_romfs_check.py gets a case for it. Not run here: the test and --probe-fs need a build and the game's files.
runtime/romfs.c compiles with llvm-mingw.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TgQM2zwuVagwScByEJhT8V
- Enable VK_NV_low_latency2 and VK_KHR_present_id with present ID features
- Add VkSwapchainLatencyCreateInfoNV to swapchain creation
- Link present and submission IDs with standard Vulkan latency types
- Insert latency markers: simulation start/end, input sample, render submit, and present
- Gate all extensions and latency chains on reflex != off (RESTART setting)
- Log graceful notice when Reflex is requested on unsupported hardware
- Add UI menu setting and translations for en, ru, pt-BR, zh-Hans
- Document reflex setting in totk.ini.example and docs/settings.md
tests/settings_doc_check.py failed on dev with these five names in known[] and described nowhere. The rows follow the
code: vk_deswizzle.c (TOTK_DESWIZZLE), kernel.c kspin_ns, main.c (rt_knob PCORE), vk_rec.c rec_submit and rec_main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With dynamic_res at 0 by default the fixres set held the scene at 100 % for every player, the reason #573 was turned
down. The default is now 1, so the set stays off unless a player turns dynamic resolution off in the menu or
totk.ini, and the Steam Deck profile no longer needs its own entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The setup wrote romfs-patches-xbox and romfs-patches-xbox-label for 16:9 only, so prompts = xbox on a 21:9, 32:9,
16:10 or 3:2 screen (the Steam Deck's 1280x800 among them) kept the game resolution at 1920x1080 (cfg.c) or, with
output_res set to the screen's shape, fell back to the Switch prompts. #979 fixed this for prompts = pc; this extends
the same mechanism to both Xbox folders, the shared-files option of #378 by way of #979's --reuse.
- The setup builds romfs-patches-xbox-<w>x<h> and romfs-patches-xbox-label-<w>x<h> for each of ASPECT_SIZES, from
their 16:9 folder with --reuse, as it does for romfs-patches-pc-<w>x<h>.
- romfs.c overlay_init: at a game resolution of another shape any prompts' folder loads from <folder>-<w>x<h> in place
of romfs-patches-<w>x<h>, not only the PC one; without it the Switch prompts stay, and the log names the missing
folder and the command that makes it. romfs_shaped_pc_ready becomes romfs_shaped_prompts_ready(folder, w, h).
- cfg.c: the display-shaped output_res default applies with prompts = xbox when the folder of the pad layout
(romfs-patches-xbox with the Nintendo layout, romfs-patches-xbox-label with any other) is there for that size.
- The menu's note for a missing shaped folder reads "off at this game resolution (no layout made for it)" in every
menu language, since 16:9 is no longer the only shape with prompts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The VM refused C0 (register conditional), so cheats like C046B400 FFFFFFFF were greyed out as unsupported. C0 now
runs with dmnt's operand types 0-5, widths and conditions; C1 and C2 save, restore and clear registers, C3 moves
registers to and from the static registers. tools/cheats.py gives the same opcode lengths and accepts the same opcodes.
skip() took the end of a nested block at depth 1 for the else of the failed outer block; it now counts depth the way
dmnt does, and 2x000000 is an else only for x = 1.
tests/cheats_vm_check.py runs tools/cheats.py and runtime/cheats.c on cheats of its own, the two from the issue
included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The floating-point helpers in simd.h and simd_fp.h inline into every lifted function before llvm-profdata matches
the profile, so the fpcheap change left pgo-v143 with a fifth of its weight while recomp/ stayed the same and
make_release saw nothing. pgo.py merge now reads the instrumented build's Ninja deps log and stores the digests of
the runtime/ headers the generated objects include (cpu.h, simd.h, simd_fp.h); make_release warns when one differs
or a record has none. docs/building.md says to retrain after a change to those headers, and build_game.py names the
libiconv-2.dll that MSYS2's SDL3.dll needs in deps-mingw/bin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the textures moved to a pool of their own, the default device-local
blocks hold mirrors and other buffers. With VMA's 256 MiB blocks one block
held 53 MiB of them after 10 minutes in the field, and the headroom thread
kept half a block of each device-local type ahead. TOTK_VMA_BLOCK_MIB
(default 64, 0 = VMA's 256) sets the size; the headroom spare follows it.
On the RX 9070, 10 minutes in the field: VMA blocks 3582 -> 3252 MiB,
process commit 8614 -> 8327 MB, slow frames 13 (2.8 s) -> 9 (1.1 s).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts: the image retry goes through vk_texture_image, sweep_pressure keeps the released-texture cap on the new
drop helpers, and vk_headroom_release also frees the texture pool's anchor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Textures shared the default 256 MiB blocks with the mirrors and other buffers, and a block went back to the driver
only once everything in it was gone. On the RX 9070 after a few minutes of roaming the field, 3 of 9 device-local
blocks were 13-27% full, held by a hundred small textures and buffers each, and blocks held 0.8-1.4 GB more than their
allocations; where device memory takes process commit, that commit backs nothing.
Own-memory textures now go to a VMA pool with 64 MiB blocks (TOTK_TEX_BLOCK_MIB, 0 = the default pools). Images of a
quarter block or more, images the driver wants a dedicated allocation for, and images the pool's memory type does not
take get memory of their own; the requirements are read before the image is made, since VMA checks neither for a
custom pool. The headroom thread keeps the pool's next block ahead like the default pools'.
Same 10-minute route: 807 MiB of blocks beyond their allocations instead of 1037, most pool blocks 75-100% full, slow
frames not up. Probes pass on v143.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures stayed until 2048 of them were kept or VRAM passed 90% of the budget. On the RX 9070 a 10-minute
field run kept 818 MiB of them, while almost every take-back came within a second. TOTK_TEX_RELEASED_MIB (default
256) runs the same drops as under VRAM pressure while the released entries hold more own memory than that. On the
same route the run ended with 1.1 GB less process commit and 1 GB less in VMA blocks; 15 dropped textures were
created again and the slow frames did not change.
Also documents TOTK_MEM_RESERVE_MIB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crash logs ended in fatal errors when the system's commit ran out for a moment: a staging buffer (-2), a guest commit
with the system at 24442 of 24447 MB, image creation (-2). Windows grows a system-managed page file and some drivers
charge device memory to the process commit, so the same request often succeeds a moment later.
oom.c holds the wait nvn_api_cmd.c realloc_wait already used: it requests a release, retries every 10 ms for up to
30 s, logs the first 8 with the commit numbers. rt_oom_request sets a flag that vk_texture_new_submit takes (one atomic
load per submit): it drops up to 256 released textures of the two kinds sweep_pressure drops (overwritten, clean
mirrored), never GPU-written content, and frees the headroom blocks. vk_oom_release does at once what needs no submit:
headroom blocks, finished upload batches and deferred objects.
- memory.c commit: waits and retries without frz_lock between tries; every caller waits, boot ones too.
- vk_staging and the draw-data chunks (vk_exec_draw.c scratch): release, then wait; the open upload batch is not
submitted, its caller still records into it.
- create_tex: release and one retry; no wait under the texture lock, the texture is asked for again at its next use.
- the texture write-back buffer: release, then wait.
- the headroom thread keeps no spare block for 30 s after a failure.
TOTK_TEST_OOM=<site>:<n> (commit, staging, image, chunk) fails the first n attempts; probe-kernel forces 3 refused
commits, probe-vkexec 2 staging buffers, 1 image and 1 chunk, and both pass through them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The arrow alone read as a direction (review of #585). The key keeps the width of the game's own glyph, so the name goes
under a solid arrow rather than on a wider key.
entry_of decides at record time whether a new texture takes the content of a live GPU-written texture at its storage
(alias_copy) or the storage bytes. In a chunked replay the source's GPU ownership is set when a chunk records its
render, so the choice followed the order the threads got to the chunks: a later chunk could take the old bytes before
an earlier chunk recorded the render, and a mirrored texture keeps them. Now a chunk that makes an entry while a live
colour texture of its size sits at the storage waits until the chunks before it are recorded (vk_exec_chunk_settle,
the texture lock released for the wait), skips sources the scan revives at a later op, and ignores GPU ownership a
later chunk set in this submission. slot_resolve and vk_texture_by_id_locked no longer read tslots through a pointer
taken before the wait.
TOTK_REPLAY_SKEW_US (debug) makes the even chunks wait before they record, so the chunk after each one records
first in every submission. With it at 3000 us and 4 threads the field save runs clean (grass drawn, 0 validation errors); the alias path
did not fire there (0 copied, 0 filled from storage), so this does not reproduce the missing grass reported on
RADV, and the fix there stays unconfirmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DLSS kept the replay on one thread: its decisions follow the passes in replay order, its jitter and camera are noted
draw by draw, and its evaluation reads the per-object motion list the scene's draws build. Now the scan takes DLSS's
decisions on its own state (vk_dlaa_plan, split out of vk_dlaa_pass) and notes the scene camera in replay order
(vk_dlaa_scan_draw), and the copy of the lit scene and the evaluation are records of the chunk that holds the op
(vk_dlaa_exec). A chunk's draws are jittered while they come before the op the scan ended the scene at. The
evaluation waits until the chunks before it are recorded, and the chunks after it wait for it (a hold), since they
sample its output. Chunks note their draws for the per-object motion one at a time (mo_lock in vk_exec_draw.c); the
uniform overrides of a motion draw and shader_for's last-frame variant flag are per thread, as the other chunks' draws
go on meanwhile; the FXAA shader table takes concurrent lookups. fxaa = 0 runs in chunks too.
With dlaa = 1 at 4K (DLSS Quality) on 1.2.1 and an RTX 5070, replay_workers = 4 takes the frame rate from 70 to 78
fps where the CPU is the limit, with no one-frame glitch in 241 consecutive frames.
(cherry picked from commit 04f8bb1b57)
replay_workers = N (0, the default, keeps the sequential replay) records a submission of enough draws in chunks that start between passes, on N threads and in twice as many chunks, and submits them in order. In the town at 4K on an RTX 5070, 4 threads take the replay from 8.2 to 4.5 ms a frame and the frame rate from 71 to 79.
A sequential scan on the submitting thread applies only what is queue state (fixed-function and bind ops, render targets, render enable and conditions, samples-passed counting) and keeps a copy of it where each chunk starts, with how far its lists got: inline uniform updates, RENDER_COND results, contact shadow marches and the ops that drop uniform copies. A chunk takes those from the lists instead of from the chunks before it, starts with every image in GENERAL and ends with a full barrier, so its recording depends only on the copy and the lists.
Each thread records with a context of its own: the replay's memos, descriptor state, occlusion query segments and per-command-buffer state moved from file statics into VkExec and VkExecDraw, and the tables the contexts share (stand-ins, depth twins, views, mirrors, timestamps, completion callbacks, crumbs) take locks or atomics. The scan makes render targets live in replay order and notes the op (vk_texture_revive), since a chunk can sample a storage before the chunk that renders it got there or after the scan went past a later target there: a chunk's texture slots resolve as of its own op, and the chunks after a texture with no entry yet wait for the chunk that makes it. Uniform copies are dropped at the op that writes them (vk_usnap_drop_at).
Contact shadows plan their march in replay order (vk_contact_plan) and the chunk that holds its op records it; the HDR source keeps the copy that comes last in replay order. DLSS and fxaa = 0 act on the frame draw by draw and keep the replay sequential. TOTK_REPLAY_STATE_CHECK=1 compares the state after the last chunk with the scan's.
A draw or dispatch whose shaders write storage buffers drops the uniform copies they cover from its own op on, as the other GPU writes do (scan_writes). The scan still translates no shader: it reads the shaders the recording contexts translated from a table shared with them (vk_exec_draw_writes), and an op whose shader no context translated yet holds the chunks after it until it is recorded. Before, the chunk that recorded such a write dropped the copies for every position at that moment, so a later chunk recorded first bound the copy taken at the submit call: on an RX 7800 XT on RADV the grass near the camera came out dark or unshaded in some runs with 4 threads.
TOTK_TRACE=perf counts the chunks held per submission by reason and logs when each chunk of the last submission began. The settings menu has the thread count under Advanced, Scheduling, with the count this run uses under it.
The recorder thread begins, ends and submits the submission's open part (vk_rec.c rec_end_cb), so a chunk's mirror prologue stays off it: vk_sync_part waits until the recorder is idle, as the part pool allows one thread at a time, then records, ends and submits the prologue itself. Through the recorder the prologue could reach the queue before it was ended, and the GPU lost the device at the title screen.
(cherry picked from commit b94e2e9642)
The setup wrote romfs-patches-pc for 16:9 only, so prompts = pc on a 21:9, 32:9, 16:10 or 3:2 screen kept the game
resolution at 1920x1080 (cfg.c) or, with output_res set to the screen's shape, fell back to the Switch prompts.
- make_romfs_patches.py --reuse <folder>: a file of an earlier overlay whose contents match is hard-linked (copied
where links fail) instead of compressed again; the output is byte for byte the same.
- The setup builds romfs-patches-pc-<w>x<h> for each of ASPECT_SIZES from romfs-patches-pc with --reuse: only the
Common archive is compressed, so the fifteen folders take about two minutes and 6 MiB each instead of 22 minutes
and 73 MiB each.
- cfg.c: the display-shaped output_res default applies with prompts = pc when romfs-patches-pc-<w>x<h> is there
(romfs_shaped_pc_ready); Xbox prompts keep 1920x1080 as before.
Shadow storage is on by default under Wine as well, and the region snapshots were only measured on a native Linux
host. TOTK_SHADOW_SNAP=1 still turns them on under Wine.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each 2 MiB region is now queried at most once per guest submission, shared with the texture checks, instead of once
per pool at every part of a submission. On a Steam Deck at Lookout Landing the replay thread's write tracking fell
from about 4.4 to 1.3 ms a frame and the frame rate rose about 7.5%. TOTK_SHADOW_SNAP=0 restores the old queries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>