Commit Graph
1205 Commits
Author SHA1 Message Date
Marjaperse 9d66735e73 Make the dynamic resolution toggle work on game version 1.1.0
The menu exposed dynamic_res on 1.1.0, but its patch table had no fixres
set, so disabling it left the engine's 80/90/100 percent tiers active.
Patch the scale returned by the controller's common epilogue, matching
the existing 1.2.1 and 1.4.3 implementation. The configured render scale
remains the maximum size, and enabling dynamic resolution restores the
original controller live.

Extend the 1.1.0 differential patch tests across dynamic tiers and both
switch states, checking register, SIMD and flag preservation. All 51
sites and 889 spin back-edges match local ExeFS; 720 native/Unicorn cases
pass. All five runtime probes pass. Live off/on/off testing shows native
3440x1440, lower tiers when enabled, and 3440x1440 again when disabled.
2026-11-16 21:07:02 +02:00
Valiantsin DzerakhandClaude Opus 5.5 f85058070e Merge pull request #790: the Mods tab order decides code sites too, conflicts show per mod, a mod can be used without its code (Eric Dallo, itaskaev2)
The mods_without_code part of #790 (Eric Dallo's commit, co-authored by itaskaev2), generalised: a per-mod switch "use
without its code" for code modules and unsupported ExeFS patch files, a run-time pick per contested code site from the
Mods tab order, and one conflict table for files, data and code. Generated C without mods is byte-identical to dev.
Plugins (MSFix) wait for the plugin lift of #845.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 20:37:17 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f541d02ba5 MOD_PLUGIN's comment names the per-mod switch that uses such a mod without its code
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 20:35:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 873903d98f The Mods tab order decides code sites too, conflicts show per mod, and each mod can be used without its code
Load order: mods_exefs_apply ranks each mod's patch sets by its position (rt_patch_rank) and runtime/patches.c fills
the pick byte of every contested site from the sets that are on, lowest rank first; a tie (two files of one mod)
goes to the later file, as emulators apply a mod's files in name order. Reorder and restart, no rebuild. The pick is
redone when an ordered set is switched at run time. Nothing changes for sites one set patches.

Conflicts: one table (mods_conflict) of winner, loser, part (files, data bytes, code sites) and count. romfs.c fills
it for files, mods_exefs_apply for the data bytes two mods stored and for the contested code sites. The log has both
directions per entry and one line per contested code site; each row of the Mods tab lists what the mod overrides and
what overrides it.

Use without its code: a per-mod switch under the row of a mod with a code module or an ExeFS patch file the port
cannot apply (mods_no_code in totk.ini, off by default). On, that code is left out and the rest of the mod is used;
the row says what is left out and why. mods_without_code = 1 holds it on for every mod and now covers the
unsupported patch files too.

--probe-mods: order to winner at contested sites in both orders, the same-mod tie, a switched-off mod, a run-time
switch of the winner, the conflict table for data and code, the per-mod switch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 20:11:43 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4d2e29aa79 The generator lets the run time pick which ordered patch set runs at a site several of them patch
A patch set marked `ordered` (recomp/patches.py) belongs to something the player orders; tools/exefs_patches.py marks
the mods' ExeFS patch sets so. A site two or more ordered sets patch is contested: its ordered alternatives test one
byte, rt_patch_pick[<site>], instead of each set's switch, and patches.h lists the contested sites with their sets for
the runtime. Other alternatives keep their place and switch, so a cheat before the mods' sets still wins while it is
on. Sites with at most one ordered set, and tables without contested sites, are emitted as before, patches.h
included. The pick goes into the lift cache key.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 20:11:27 +03:00
8e098e95a8 A mod with a code module the port cannot run can be used without it (mods_without_code)
Taken from PR #790, which carries Eric Dallo's work from his fork (ericdallo/totk-pc-recomp, 6241358f): only its
mods_without_code part, adapted to dev, which has the ExeFS data writes already (#835) and no plugin runner. A mod with
an exefs/subsdk* or a replaced exefs/main stays off as a whole; mods_without_code = 1 under [mods] uses the rest of it
(RomFS files, cheats, ExeFS patch files) without that code. ModInfo.code names the modules that do not load; the
scan logs it, the Mods tab says it on the mod's row and shows the switch once such a mod is there.

Co-Authored-By: itaskaev2 <165683571+itaskaev2@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 19:56:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 000d8f7feb barrier_merge's example sits under [performance] in totk.ini.example, the section cfg.c gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:28:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 684ca3d9f3 Merge pull request #1237: barrier_merge, off by default, keeps a render pass open through the game's texture-invalidating barriers (ripps818)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:28:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4798a3bdcf Merge pull request #1233: falling rain draws with shadow storage, the shadow's pending GPU writes merge word by word (ipavlin98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:16:17 +03:00
Valiantsin DzerakhandClaude Opus 5.5 547350167b The shadow's word merge loads whole words and updates only the bases over the range
diff_run read each word with a memcpy of variable size, a library call per word, and base_set walked every pending
range (about a hundred) for each run of differing words. word_at loads 4 bytes directly and the bases over the merged
range are found once per merge. Rain at night, shadow = 1 and sync_ahead = 1: the fence write-back took 11-12 ms per
60 frames instead of 20-22 (the plain copy with TOTK_WB_MERGE=0: 7-8 ms). No change in what is merged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:12:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 005881da20 barrier_merge docs name the by-region limit instead of an unexplained edge difference
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:05:34 +03:00
Valiantsin DzerakhandClaude Opus 5.5 af1329440d barrier_merge costs nothing per draw while off and guards the reads a merged Barrier cannot order
The storage check in prepare_draw ran on every draw with the setting off; it now runs only when the context's cached
flag is on, and after bind_resources, which may restart the pass (ub_written) and clear the note of a storage writer.
A pass whose target is a 3D BC stand-in no longer merges: its texture gets the writes only at the pass end. After a
merged Barrier, a draw with a storage image or a vertex texture that is an attachment of the pass ends the pass and
begins the next behind the full barrier (merge_guard), since the in-pass by-region barrier orders only fragment shader
sampling. The per-bit Barrier counters count only under TOTK_TRACE=gfx.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:03:42 +03:00
Valiantsin Dzerakh 589e1cc03c Merge branch 'pr/1237' into task/pr1237 2026-11-16 17:50:44 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a16120452d Merge pull request #1233: falling rain draws with shadow storage (ipavlin98)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 17:50:29 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a3cfb73ab0 Merge pull request #1239: Reflex holds frames to the pacer's frame limit, so fps_limit = display no longer caps it at 60 (itaskaev2, #1218)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 17:49:58 +03:00
Valiantsin Dzerakh c9f155b72f Merge branch 'pr/1239' into task/pr1239 2026-11-16 17:48:33 +03:00
itaskaev2andClaude Opus 5.5 0a92f9b186 Hold Reflex to the pacer's frame limit, so fps_limit = display no longer caps it at 60
reflex_apply_locked read TOTK_FPS_LIMIT with cfg_int, which turns "display" into the setting's default, 60: with
Reflex on, a 144 Hz monitor stayed at 60 fps. It now takes frame_step_limit_hz, the rate the pacer holds (the
setting, the monitor's rate for display, 60 without the real-time step), and checks it on every present, as the
window measures the monitor's rate after the swapchain is made.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 08:12:34 +01:00
ripps818andClaude Sonnet 5.5 61a407b0e1 Add barrier_merge: keep a render pass open through the game's texture-invalidating barriers
The runtime ended the Vulkan pass at every game Barrier. A Barrier that asks only for fragment ordering and texture
invalidation (ORDER_FRAGMENTS | INVALIDATE_TEXTURE) now leaves the pass open when none of the pass's draws can write a
storage buffer or image, and the next draw sees the writes through a by-region barrier in the feedback layout. Off by
default (barrier_merge = 0, TOTK_BARRIER_MERGE). TOTK_TRACE=gfx also prints how many passes ended by a change of targets
and by the game's Barrier, how many Barrier calls were merged and which NVN barrier bits they carry.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-15 22:00:38 -06:00
ipavlin98 f8e0a7b374 The shadow's word merge skips equal words 64 bytes at a time 2026-11-16 04:01:22 +03:00
ipavlin98 77a52e4577 TOTK_WB_MERGE=0 also turns off the shadow storage's word merge, so the two can be compared 2026-11-16 03:55:56 +03:00
ipavlin98 cabbfc5c86 Shadow storage merges pending GPU writes word by word in both directions, so falling rain draws with shadow = 1: the CPU copy into the shadow skipped every range a recorded GPU write covered, and the particle buffer the rain shaders update is always one, so new drops never reached the GPU, and the copy back at the fence put the shadow's whole range over them 2026-11-16 03:46:43 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e38f3a2223 Merge task/addroff: the GPU address map for device faults is off by default (#1174)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 20:13:09 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c5b1cc7fac The GPU address map for device faults is off by default (#1174)
With VK_EXT_device_address_binding_report enabled, AMD's Windows driver (26.10.1) tracks every bound range in a
chained hash map that it searches on nearly every recorded command. The chains grow as textures stream in and out, so
after 5-10 minutes in a busy area recording a submission cost 3-4 times more and an RX 9070 XT fell from 60 to 20-30
fps. The map only serves the fault report after a device lost, so TOTK_ADDR_REPORT now defaults to 0 and =1 turns it
on for a run that chases a fault. ADDR_REPORT is a known key now, so the ini line no longer logs "unknown key".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 20:13:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6151ac4fbc Merge task/bindoff: TOTK_BIND_INC is off by default
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v0.4.1
2026-11-15 19:11:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ccf9837764 TOTK_BIND_INC is off by default
With it on, a GTX 1050 Ti lost the device at one place in the world, after the validation layer reported a descriptor
pool reset while a command buffer still used it and binds of that pool's sets. The cause is not found and the slower
diagnostic runs did not bring the loss back. bind_inc saves about 1% of the frame, so it waits until the cause is known;
bind_inc = 1 in totk.ini still turns it on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 19:11:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c418dbef04 Merge task/pjournal: a device loss logs the last descriptor pool events, and a pool with two owners is logged at once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 18:55:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d6715029e5 A device loss logs the last descriptor pool events, and a pool with two owners is logged at once
The replay keeps a ring of the last 1024 descriptor pool events (a CbRes made, a pool handed to a CbRes from the spare
list or new, a pool reset or destroyed), a few per submission and nothing per draw. vk_device_fault_report logs the
newest 256 after a device loss. Each pool's owner is checked under spare_lock as the pool is handed out and as it is
reset: a pool handed out while another CbRes holds it, or reset by a CbRes that does not hold it, is logged at once
with the 64 events before it. On a GTX 1050 Ti with TOTK_BIND_INC on, the validation layer reported a descriptor pool
reset while a command buffer used it, then binds of its sets, before a device lost that slower diagnostic runs did
not bring back; the next one names the pool's owners.

--probe-vkexec gains a set batch part (60 submissions of batched sets with splits and empty submissions beside them),
a pool owner part (one pool handed to two CbRes, then reset by the one that no longer holds it: two conflicts) and
calls the device loss report on the working device to check that it comes out and returns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 18:55:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 434533aa11 Merge pull request #1207: the memory probe's test textures carry their pool flags, so --probe-vkmem passes again (shenjackyuanjie)
Only the fix commit is taken; the PR branch carries 88 unrelated fork merges. On top: the slot redirect check follows
the format rule of 1c5c6fdb, which the pool-flags failure had hidden.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 11:12:47 +03:00
Valiantsin DzerakhandClaude Opus 5.5 810cf2c2bb The memory probe's slot redirect check follows a texture of the slot's own format
Since 1c5c6fdb a finalized slot follows only a live entry of its texel format at its storage; the check still put an
RGBA8 texture over a BC1 slot and expected the slot to follow it. The live texture is now BC1 of another size, and a
second check puts an RGBA8 texture at the same storage and expects the slot to stay.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 11:12:40 +03:00
Valiantsin Dzerakh fad20c0fcd Up version 0.4.1 2026-11-15 11:08:49 +03:00
shenjack 74bb01d2af Preserve pool flags in the Vulkan memory probe texture fixture 2026-11-15 11:07:25 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c26c3a04bc Merge pull request #1203: on AMD's Windows drivers objects against clouds and fog lose the light blocky fringe round their silhouettes; a discard demotes the fragment as on the Switch (codexx-dev, #164)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 10:38:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f5e560d176 Merge pull request #1200: with contact shadows on, rock faces turned away from the sun no longer go dark and smoky, and fewer dark strokes cross the grass (itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 10:08:44 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6ff98e2d61 Contact shadows take the in-image neighbour on the screen border when they find the surface normal
On the border the clamped neighbour is the pixel itself, so the nearer-in-depth pick took a zero difference and
normalize() returned NaN; `lit <= 0.0` is false for NaN, so whether those pixels were marched and what they wrote
depended on how the driver clamps NaN. The border now uses the side inside the image, and a NaN gate skips the march.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 10:05:54 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f76a24a7cf Merge pull request #1200 into task/pr1200: with contact shadows on, rock faces turned away from the sun no longer go dark and smoky in haze and fog (itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:34:39 +03:00
Valiantsin DzerakhandClaude Opus 5.5 33bfd29ebb Merge pull request #1197: a Calibrate gyro button on the Controls tab removes the aim drift of a controller with a gyro bias; each controller keeps its own, and a calibration where the pad moved is rejected (palxex)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:32:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0efa904d90 A new controller no longer inherits the previous one's gyro bias, and a calibration where the pad moved is rejected
The bias reset in sensors_ready only ran when sensor_pad was nonzero, but scan_pads zeroes it on every disconnect,
so a pad connected after another one kept the old pad's bias, and an attempt still collecting finished on the new
pad under the old pad's name. The bias was also loaded only once, at the first StartSixAxisSensor.

- input.c pad_bias_select runs for every pad the sensor code sees: it drops the old bias and attempt, then loads the
  saved bias when gyro_bias_pad names this pad. scan_pads drops them on disconnect. The bias loads with
  gyro_calibration off too, so turning the switch on mid-run applies it.
- The pad identity is the name plus an FNV-1a hash of SDL's serial when the pad reports one, so two pads of one
  model no longer share a bias; the hash keeps the Bluetooth address out of totk.ini and the log.
- An attempt skips 0.5 s of samples (the button press shakes the pad), then averages 1 s. It is rejected when the
  largest per-axis standard deviation exceeds 0.04 rad/s; a steady bias of any size passes. The row then says the
  controller moved (new UI_MENU_GYRO_CALIBRATE_MOVED in all four catalogs) and the bias in effect stays.
- The timeout counts 5 s without a sample, not 5 s from the start.
- Calibrate gyro starts the sensor thread when the game has not yet (title screen) instead of doing nothing.
- Row states are an enum (MOTION_CALIB_*); motion_calibrate_start takes the clock, and only the gamepad's fusion
  instance writes totk.ini, so --probe-services now checks a measured bias, a rejected attempt and the timeout.
- The duplicate copy_name in motion_fusion.c is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:32:05 +03:00
Valiantsin Dzerakh 0a792f22c1 Merge pull request #1197 into task/pr1197: a Calibrate gyro row on the Controls tab removes the aim drift of a controller with a large gyro bias (palxex) 2026-11-15 09:21:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7b5265d1fd Discard as demote runs only where shaderDemoteToHelperInvocation is enabled, and the log says whether it is on (#164)
vk_device.c create_device records the feature from the Vulkan 1.3 chain it passes to vkCreateDevice. spirv_demote
leaves the module as the translator wrote it without the feature, also under TOTK_DEMOTE=1, since the
DemoteToHelperInvocation capability needs it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:19:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 db26ab1abb Merge pull request #1194: a charged attack that hits no longer crashes above 60 fps when the weapon's hit record map is full (project-snail)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:12:55 +03:00
Valiantsin DzerakhandClaude Opus 5.5 fda4e62405 Merge pull request #1203 into task/pr1203: objects against clouds and fog lose the light blocky fringe on AMD's Windows drivers (codexx-dev)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:08:13 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c8a6b91c61 The empty hit list sites' comment names the functions, the stale slot and the registers the skipped path reads
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:04:34 +03:00
Valiantsin DzerakhandClaude Opus 5.5 8fde60d854 Merge pull request #1194 into task/pr1194: a charged spear attack that hits no longer crashes above 60 fps (project-snail)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:04:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b642c849ef Merge task/fpslim: the FP fast paths of the game's code are smaller with the same results, 8% fewer instructions in the hottest functions (#381)
The directed-RMode test folds into the result compare through a per-thread threshold, vector slow paths take
their operands through the Cpu instead of stack copies (___chkstk_ms leaves the large lifted functions), the
static FP helpers use preserve_most, and the slow paths rerun only the failing lanes. Bit-identical to the old
headers: 14.85M edge cases under every FPCR mode on v3 and v2, and 13.4G FP ops compared in a check-mode build in
the town and fight2.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 08:54:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 2ab5329909 The NVN probe's Cpu gets the FP result check threshold too
Its static Cpu ran guest code with a zeroed threshold, which lets +-smallest normal pass the check unexamined.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 08:54:22 +03:00
codexx-dev fc87618233 Demote instead of OpKill on AMD's drivers so a discard keeps the quad's derivatives defined (#164) 2026-11-14 21:25:22 -03:00
itaskaev2andClaude Opus 5.5 a3fee27cfe Leave surfaces turned away from the sun out of the contact shadows
The contact shadow march darkened the whole lit colour of every pixel whose ray toward the sun passed behind
geometry. On a face turned away from the sun the ray runs into that face at once, so every such face within 80 m
was darkened by the full strength, although it gets no direct sunlight to lose: what was darkened was its ambient
light and the fog the composite had already added. In hazy scenes (the Gerudo sandstorm) the shaded rock faces and
the undersides of overhangs showed as dark smoky silhouettes in the haze, and objects such as a wagon lost their
fogged look. The shader now takes the surface normal from the linear depth and scales the shadow by how far the
surface faces the sun: none for faces turned away, a growing share from a grazing angle on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:35:24 +01:00
Valiantsin DzerakhandClaude Opus 5.5 5c48f62fca The FP fast paths of the lifted code check FPCR.RMode inside the result compare and pass vector slow-path operands through the Cpu
The result check of every scalar and vector FP op compares |r| against a per-thread threshold in the Cpu (fp_th_s,
fp_th_d): the smallest normal in round-to-nearest, NaN under a directed RMode, so a directed mode sends every result
to the redo path and the separate load and test of c->fpcr per op goes. rt_fpcr_threshold sets it; rt_fpcr_sync
calls it on every host, and the Cpu inits and the fiber switch's fpcr copy call it too.

The vector slow path FN(vredo) takes its operands from c->fp_arg instead of three stack copies per call site, which
takes ___chkstk_ms out of the large lifted functions (275 call sites in main to 5). It reruns only the lanes that
failed the check. A NaN result in round-to-nearest goes from redo straight to fix with the FZ-flushed operands. The
static FP helpers use preserve_most, so their cold call sites do not spill the caller-saved registers.

Results are bit-identical to the old headers (equivalence harness of build/v143-genko/static2, 200M cases).
On the 42 hottest 1.4.3 functions: instructions -8.2%, bytes -8.8%, hot-path instructions -4.3%.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 00:31:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 94eb3d4628 Merge pull request #322: Steady detail under load, a switch that stops the game lowering model and texture detail when the frame rate drops (ProSep)
The PR's level-of-detail distance part is left out: it made no visible difference in play, and the emulator mod it came from was dropped there as a placebo.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:07:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5f1d74023b Remove the lod_range setting and the lodrange patch set; lod_steady stays
Playtests showed no visible difference from lod_range, and the emulator mod scene dropped the same change as a placebo.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:07:00 +03:00