Commit Graph
228 Commits
Author SHA1 Message Date
Marjaperse 9d66735e73 Make the dynamic resolution toggle work on game version 1.1.0
The menu exposed dynamic_res on 1.1.0, but its patch table had no fixres
set, so disabling it left the engine's 80/90/100 percent tiers active.
Patch the scale returned by the controller's common epilogue, matching
the existing 1.2.1 and 1.4.3 implementation. The configured render scale
remains the maximum size, and enabling dynamic resolution restores the
original controller live.

Extend the 1.1.0 differential patch tests across dynamic tiers and both
switch states, checking register, SIMD and flag preservation. All 51
sites and 889 spin back-edges match local ExeFS; 720 native/Unicorn cases
pass. All five runtime probes pass. Live off/on/off testing shows native
3440x1440, lower tiers when enabled, and 3440x1440 again when disabled.
2026-11-16 21:07:02 +02:00
Valiantsin DzerakhandClaude Opus 5.5 873903d98f The Mods tab order decides code sites too, conflicts show per mod, and each mod can be used without its code
Load order: mods_exefs_apply ranks each mod's patch sets by its position (rt_patch_rank) and runtime/patches.c fills
the pick byte of every contested site from the sets that are on, lowest rank first; a tie (two files of one mod)
goes to the later file, as emulators apply a mod's files in name order. Reorder and restart, no rebuild. The pick is
redone when an ordered set is switched at run time. Nothing changes for sites one set patches.

Conflicts: one table (mods_conflict) of winner, loser, part (files, data bytes, code sites) and count. romfs.c fills
it for files, mods_exefs_apply for the data bytes two mods stored and for the contested code sites. The log has both
directions per entry and one line per contested code site; each row of the Mods tab lists what the mod overrides and
what overrides it.

Use without its code: a per-mod switch under the row of a mod with a code module or an ExeFS patch file the port
cannot apply (mods_no_code in totk.ini, off by default). On, that code is left out and the rest of the mod is used;
the row says what is left out and why. mods_without_code = 1 holds it on for every mod and now covers the
unsupported patch files too.

--probe-mods: order to winner at contested sites in both orders, the same-mod tie, a switched-off mod, a run-time
switch of the winner, the conflict table for data and code, the per-mod switch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 20:11:43 +03:00
8e098e95a8 A mod with a code module the port cannot run can be used without it (mods_without_code)
Taken from PR #790, which carries Eric Dallo's work from his fork (ericdallo/totk-pc-recomp, 6241358f): only its
mods_without_code part, adapted to dev, which has the ExeFS data writes already (#835) and no plugin runner. A mod with
an exefs/subsdk* or a replaced exefs/main stays off as a whole; mods_without_code = 1 under [mods] uses the rest of it
(RomFS files, cheats, ExeFS patch files) without that code. ModInfo.code names the modules that do not load; the
scan logs it, the Mods tab says it on the mod's row and shows the switch once such a mod is there.

Co-Authored-By: itaskaev2 <165683571+itaskaev2@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 19:56:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 000d8f7feb barrier_merge's example sits under [performance] in totk.ini.example, the section cfg.c gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:28:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 005881da20 barrier_merge docs name the by-region limit instead of an unexplained edge difference
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 18:05:34 +03:00
Valiantsin Dzerakh 589e1cc03c Merge branch 'pr/1237' into task/pr1237 2026-11-16 17:50:44 +03:00
ripps818andClaude Sonnet 5.5 61a407b0e1 Add barrier_merge: keep a render pass open through the game's texture-invalidating barriers
The runtime ended the Vulkan pass at every game Barrier. A Barrier that asks only for fragment ordering and texture
invalidation (ORDER_FRAGMENTS | INVALIDATE_TEXTURE) now leaves the pass open when none of the pass's draws can write a
storage buffer or image, and the next draw sees the writes through a by-region barrier in the feedback layout. Off by
default (barrier_merge = 0, TOTK_BARRIER_MERGE). TOTK_TRACE=gfx also prints how many passes ended by a change of targets
and by the game's Barrier, how many Barrier calls were merged and which NVN barrier bits they carry.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-15 22:00:38 -06:00
Valiantsin DzerakhandClaude Opus 5.5 c5b1cc7fac The GPU address map for device faults is off by default (#1174)
With VK_EXT_device_address_binding_report enabled, AMD's Windows driver (26.10.1) tracks every bound range in a
chained hash map that it searches on nearly every recorded command. The chains grow as textures stream in and out, so
after 5-10 minutes in a busy area recording a submission cost 3-4 times more and an RX 9070 XT fell from 60 to 20-30
fps. The map only serves the fault report after a device lost, so TOTK_ADDR_REPORT now defaults to 0 and =1 turns it
on for a run that chases a fault. ADDR_REPORT is a known key now, so the ini line no longer logs "unknown key".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 20:13:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ccf9837764 TOTK_BIND_INC is off by default
With it on, a GTX 1050 Ti lost the device at one place in the world, after the validation layer reported a descriptor
pool reset while a command buffer still used it and binds of that pool's sets. The cause is not found and the slower
diagnostic runs did not bring the loss back. bind_inc saves about 1% of the frame, so it waits until the cause is known;
bind_inc = 1 in totk.ini still turns it on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 19:11:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0efa904d90 A new controller no longer inherits the previous one's gyro bias, and a calibration where the pad moved is rejected
The bias reset in sensors_ready only ran when sensor_pad was nonzero, but scan_pads zeroes it on every disconnect,
so a pad connected after another one kept the old pad's bias, and an attempt still collecting finished on the new
pad under the old pad's name. The bias was also loaded only once, at the first StartSixAxisSensor.

- input.c pad_bias_select runs for every pad the sensor code sees: it drops the old bias and attempt, then loads the
  saved bias when gyro_bias_pad names this pad. scan_pads drops them on disconnect. The bias loads with
  gyro_calibration off too, so turning the switch on mid-run applies it.
- The pad identity is the name plus an FNV-1a hash of SDL's serial when the pad reports one, so two pads of one
  model no longer share a bias; the hash keeps the Bluetooth address out of totk.ini and the log.
- An attempt skips 0.5 s of samples (the button press shakes the pad), then averages 1 s. It is rejected when the
  largest per-axis standard deviation exceeds 0.04 rad/s; a steady bias of any size passes. The row then says the
  controller moved (new UI_MENU_GYRO_CALIBRATE_MOVED in all four catalogs) and the bias in effect stays.
- The timeout counts 5 s without a sample, not 5 s from the start.
- Calibrate gyro starts the sensor thread when the game has not yet (title screen) instead of doing nothing.
- Row states are an enum (MOTION_CALIB_*); motion_calibrate_start takes the clock, and only the gamepad's fusion
  instance writes totk.ini, so --probe-services now checks a measured bias, a rejected attempt and the timeout.
- The duplicate copy_name in motion_fusion.c is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:32:05 +03:00
Valiantsin Dzerakh 0a792f22c1 Merge pull request #1197 into task/pr1197: a Calibrate gyro row on the Controls tab removes the aim drift of a controller with a large gyro bias (palxex) 2026-11-15 09:21:40 +03:00
Valiantsin DzerakhandClaude Opus 5.5 94eb3d4628 Merge pull request #322: Steady detail under load, a switch that stops the game lowering model and texture detail when the frame rate drops (ProSep)
The PR's level-of-detail distance part is left out: it made no visible difference in play, and the emulator mod it came from was dropped there as a placebo.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:07:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5f1d74023b Remove the lod_range setting and the lodrange patch set; lod_steady stays
Playtests showed no visible difference from lod_range, and the emulator mod scene dropped the same change as a placebo.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:07:00 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6347b8262a The audio output device can be chosen on the Sound tab and in totk.ini (audio_device), and a change moves the sound to it while the game runs (#1014)
TOTK_AUDIO_DEVICE names the device as SDL lists it; unset, empty or default keeps the system default and the same open
as before. audio_mixer.c output_open opens the named device, or the default with one log line when it is not
connected. Once a device is chosen, an output worker thread (output_worker) owns the SDL stream: on a cfg change and
once a second it resolves the name again and output_switch opens the new device with the same spec, destroys the old
stream (which waits for its callback), restarts the prefill and resumes. The render thread only wakes or starts the
worker (output_watch), so the game's audio never waits for a device open. A chosen device that disappears falls back
to the system default and comes back within a second of being plugged in again. TOTK_AUDIO_CHANNELS=auto reads the
channels of the device chosen at start.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 22:28:42 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0ce53aa7c7 The DualSense and DualShock 4 touchpad click is a bindable gamepad input named touchpad, shown and captured on the Controls tab (#482)
PAD_TOUCHPAD follows the paddles in input_map.h and reads SDL_GAMEPAD_BUTTON_TOUCHPAD in input.c pad_physical, so
input_capture sees the click when a Controls cell waits for a press (#852 had no pad id to report it). It is unbound by
default; pads without a touchpad never report it held.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 22:19:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 cf3acd0a2f Model detail range replaces the distant detail switch: lod_range scales the depth at which models leave their detailed level (1x, 1.5x, 2x, 3x or max) (#949)
The pick patched before (main+0x1ee8424) is reached through its vtable only when the method is overridden; the culling
passes run about 20 inlined copies of it, so the switch changed almost nothing. The lodrange set patches the two places
per version that compute the level depth B at model setup (the setter and its inlined copy); the slope of the coarser
levels follows from B there, and max takes B = 1e30. The menu row sits under Grass range, with Steady detail under load
after it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 21:58:48 +03:00
palxex dc13b194ce Add gyro bias calibration for the six-axis sensor
The yaw axis has no gravity reference, so it drifts with the gyro's
manufacturing bias. Two controllers of the same model can drift in
opposite directions, and the sensor fusion had no way to estimate or
remove the offset: aiming with motion turned slowly on its own and
needed constant correction.

A Calibrate gyro row on the Controls tab collects 250 gyro samples
(about a second) while the controller is held still, averages them per
axis into a bias, subtracts that bias from every sample before the
fusion integrates it, and restarts the angle so the estimate starts
clean. Collection has no motion threshold: a controller whose bias
exceeds any absolute threshold would otherwise never finish, which is
how the first version of this stalled with no way out. Five seconds
without the expected samples ends the attempt, from the sample path and
from the menu alike, so a sensor thread that stops feeding it is
reported instead of leaving the row on "calibrating". The first raw
sample and the final bias are logged, so a report carries the numbers
that were measured.

The row's value says where the controller stands: calibrating,
"<controller>, calibrated" once it is done or when the bias was loaded
from totk.ini at start, and "calibration failed" when an attempt timed
out with no bias in effect. A controller change cancels a calibration
that is in progress and clears the bias and the label, so neither is
carried over to the new controller.

The behaviour sits behind gyro_calibration (the Controls tab's "Gyro
bias calibration", default on, live): off, the fusion takes the raw
gyro, an attempt in progress is dropped, and nothing is loaded at
start, while the saved keys stay in totk.ini so turning it back on
restores the last calibration.

The bias and the controller's name go to totk.ini when calibration
completes, outside the fusion's lock, and are loaded at the next start
only when the connected controller has the same name.

Tested with a Switch Pro Controller on the 1.4.3 build: the log shows a
z-axis bias of 0.139 rad/s (8 degrees per second), calibration finishes
in about a second, the yaw drift is gone, and the row reports each state.
2026-11-15 02:26:30 +08:00
Valiantsin DzerakhandClaude Opus 5.5 517a161457 Merge pull request #322: distant model detail settings, brought up to date with dev (ProSep)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 21:16:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 2f32f21f5c The incremental draw preparation is on by default, and bind_inc and memx are listed in totk.ini.example (#381)
TOTK_BIND_INC had no settings row, so unset meant off. It now has one with default 1, like TOTK_MEMX: 0 or off turns
it off, check keeps the comparison mode. The check mode found 0 differences on 13 scenes (town, fight2, Kakariko,
Great Sky Island, Depths lit and dark, a shrine, rain, a cave, evening, a field, the menus, entering a building).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 20:03:24 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e654aa288f Merge pull request #1165 into task/prfix: SHADOW is a known totk.ini key (itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 08:34:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f83fdbbd0b The music, effects and voice volumes classify nothing at their defaults, look a voice up once per wave buffer, and count unmatched sounds as effects (#722)
At 100/100/100 the RomFS, zstd and Opus hooks and the mixer lookup are skipped (audio_cat_active); the
RomFS handle still keeps its category, so a stream opened earlier is classified by its later reads once a
setting moves. The mixer keeps each voice's category until it moves to another wave buffer or coefficient
table, instead of up to six scans of a 32768-entry ring per voice per frame; the ring is 4096 entries and
lookups take its lock. zstd decodes check the BARS magic before any lookup. The guesses from BWAV headers
(Opus means voice, stereo ADPCM means music) are gone: Opus streams are the DmT cutscene beds and stereo
ADPCM is common among effects. Unknown Opus output counts as effects. A once-a-minute log line counts the
categories while a setting is below 100.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 08:38:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 25f42aa84e Merge pull request #1146 into task/pr1146: separate Music, SFX and Voice volume sliders
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 08:26:13 +03:00
itaskaev2andClaude Opus 5.5 5c57d94098 List shadow among the known settings and document it as a totk.ini key
The runtime reads TOTK_SHADOW through cfg_get, so `shadow = 1` in totk.ini already turns shadow storage on, but the
key was missing from cfg.c known[]: every such totk.ini logged "unknown key 'SHADOW'", which reads as if the line did
nothing. The docs only named the environment variable.

known[] now has SHADOW, totk.ini.example describes `shadow` next to sync_ahead (which needs it), and the sync_ahead
text, its log line, docs/building.md and docs/architecture.md name the totk.ini key next to TOTK_SHADOW. Behaviour is
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 23:41:44 +01:00
Valiantsin DzerakhandClaude Opus 5.5 97dd94eb99 The HDR hue setting drives the RenoDX colour reconstruction, its matrix chains fold at compile time, and the notices name the adapted code
hdr_hue (TOTK_HDR_HUE) scales the MacLeod-Boynton hue and purity transfer that replaced #442's blend: the default
moves from 80 to 70, where the transfer is RenoDX's default 70% hue shift and 65% SDR blowout, and 0 turns it off
as the menu text says. The shader's two-step colour space conversions become one constant matrix each and the D65
white point a constant, which halves its matrix-vector products. THIRD_PARTY_NOTICES.md and vk_hdr.c now say the
reconstruction is adapted from RenoDX at 43c067b, MIT.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 23:21:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e6839387fc Merge task/abilityguard: a stale Recall / Ultrahand target is dropped only where the game would fault on it, replacing the 4 GiB target check, and the model scene report loop gets a bound (#1005, #1137, #1145)
The ability guard (runtime/ov_ability.c) checks the holder, the actor, its component and the reference word the game
writes, so it catches every bad target seen in the reports: -1, 0x80, an empty bounding box (FLT_MAX) and a vtable in
main's data. The optref site at main+0x1bd01c8 (1.2.1: 0x1622bf4) is dropped: set ability patches the same address and
must win there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 19:57:07 +03:00
Valiantsin DzerakhandClaude Opus 5.5 df3e90dc4c Merge task/pr1136: opt-in gameplay tweaks for keyboard and mouse, the wheel turns and moves an Ultrahand object, switches weapons, steps the D-pad strips and zooms the map smoothly (RxEmam)
Pull request #1136 with three fixes: the Russian and Portuguese rows name Ultrahand as the catalogs do, smooth map
zoom takes the wheel only on the map menu_cursor.c finds, and the weapon bar opens only where the camera hooks saw
free roam, a lock-on or a mount. Off by default (gameplay_tweaks_enabled = 0).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 18:29:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a9de583d79 Merge pull request #1002: game 1.1.0 gets the core frame and camera patch sets of 1.2.1 and 1.4.3, so the frame rate, cursor, field of view and aspect ratio options work on it (shenjackyuanjie)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 18:29:21 +03:00
0xEmz 1f224dc0f9 Add separate Music, SFX, and Voice volume sliders (#722)
Add volume_music, volume_sfx, and volume_voice sliders under the Sound tab
in the F1 settings menu and in totk.ini to control background music, sound
effects, and character voices independently.

Classifies audio streams by file path in RomFS, parses BARS and BWAV headers
for ADPCM coefficient tables and stream formats, tags decompressed Opus streams
from nn::codec, and applies per-category gain factors in the audio mixer
during voice rendering.

Localized across English, Russian, Brazilian Portuguese, and Simplified Chinese.
Documented in totk.ini.example.
2026-11-12 17:25:33 +02:00
Valiantsin DzerakhandClaude Opus 5.5 d14e2a8f62 Merge pull request #1136 into task/pr1136
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 18:21:53 +03:00
0xEmz 312e59a9f7 Add optional mouse wheel and keyboard gameplay tweaks (gameplay_tweaks_enabled, off by default). 2026-11-12 03:29:24 +02:00
Valiantsin DzerakhandClaude Opus 5.5 42c458712d Crash guards switchable from totk.ini: optref_guard, ability_guard, report_guard (#1005)
The three patch sets read their switch through cfg, so the keys already worked from totk.ini but logged as unknown and
were undocumented. They are now known keys with defaults (on), in [performance] of totk.ini.example; the settings menu
does not show them. The settings table reached 128 rows, the size of the menu's reset list, so that list grows to 256
and logs if the table ever outgrows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 17:16:10 +03:00
itaskaev2andClaude Opus 5.5 fc985e690e Bring back the game window's pointer image as pointer_image, off by default
#1092's pointer image (runtime/cursor_art.c: a gold arrowhead with a dark edge, a turquoise gem and a soft shadow,
drawn at the window's DPI) was left out of dev because it changed the pointer for every player with no way to keep
the system arrow. It now comes with pointer_image (input section, live, default 0): 0 leaves the window class's arrow
as dev has it, 1 shows the image while the cursor is not captured. Win32 reads the setting at WM_SETCURSOR (the
next mouse move after a change); SDL sets the image or its default cursor when the settings change (input_sdl_idle).
The setting has its row under the mouse rows of the Controls tab, its text in the four menu languages, and
totk.ini.example and docs/controls.md describe it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 14:48:24 +01:00
Valiantsin Dzerakh 873fc64b41 Merge pull request #1087 into task/pr1087 2026-11-11 13:20:43 +03:00
Valiantsin Dzerakh fc1cf24c42 Merge pull request #1097 into task/kbmwave
# Conflicts:
#	docs/controls.md
#	runtime/cfg.c
#	runtime/input.c
#	runtime/menu_cursor.c
#	runtime/ui/menu.cpp
#	runtime/ui_text.c
#	runtime/ui_text.h
#	totk.ini.example
2026-11-11 13:11:10 +03:00
Valiantsin Dzerakh 24bcc546e9 Merge pull request #1096 into task/kbmwave 2026-11-11 13:10:00 +03:00
Louis JusticeandClaude Opus 5.5 9f17d7899d Turn map_click off by default, so each key presses one controller button unless the player opts in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 19:54:30 -05:00
Louis JusticeandClaude Opus 5.5 b477b489ff Turn dialogue_click off by default, so each key presses one controller button unless the player opts in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 19:54:10 -05:00
Louis JusticeandClaude Opus 5.5 34ee6684a9 In dialogue the left mouse button presses B and the right one A instead of their bindings (dialogue_click, game 1.4.3).
By default the left button is Y, which opens the dialogue log in a dialogue box. While MessageDialog_00 is open the
left button now presses B, which advances the text and shows the rest of a scrolling line, and the right one A.
Dialogue choices keep the menu pointer, where a left click picks the choice under it, so clicking through a
conversation does not pick the choice the focus starts on. The setting is live and independent of menu_cursor.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 19:38:43 -05:00
Louis JusticeandClaude Opus 5.5 1becabd8f6 The left mouse button presses A on the Purah Pad's map instead of its binding (map_click, game 1.4.3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 16:27:03 -05:00
Valiantsin DzerakhandClaude Opus 5.5 52b099bacb Merge pull request #913: NVIDIA Reflex low latency, off by default (#638 by STS78721, carried by itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 23:21:50 +03:00
itaskaev2andClaude Opus 5.5 9680b8e6ec Add grass_range: how far around the camera grass grows
The game grows grass blades only inside its near grass map, a 62.5 m square around the camera drawn into 256x256 and
128x128 textures, so on open meadows the grass appears a short way in front of the player. grass_range (percent, 50
to 400, default 100) scales the map's extent, step and both textures together through a new grass patch set (1.2.1
and 1.4.3) that loads them from patch page +128..+144, and grows the HeapDef grass heap and the application pool for
the larger textures. At 100 the set stays off and nothing changes. A row in the Display menu, text in all four menu
languages, and totk.ini.example describe it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 20:13:59 +01:00
Tears of the SteelTemple 3209ea4358 Implement Native NVIDIA Reflex Low Latency (VK_NV_low_latency2)
- Enable VK_NV_low_latency2 and VK_KHR_present_id with present ID features
- Add VkSwapchainLatencyCreateInfoNV to swapchain creation
- Link present and submission IDs with standard Vulkan latency types
- Insert latency markers: simulation start/end, input sample, render submit, and present
- Gate all extensions and latency chains on reflex != off (RESTART setting)
- Log graceful notice when Reflex is requested on unsupported hardware
- Add UI menu setting and translations for en, ru, pt-BR, zh-Hans
- Document reflex setting in totk.ini.example and docs/settings.md
2026-11-10 18:20:16 +01:00
itaskaev2andClaude Opus 5.5 2a564f648c Describe climb_fix in totk.ini.example
tests/settings_doc_check.py failed on v0.4.0: CLIMB_FIX is in known[] and described in neither file. It is a player
setting with a menu toggle under [frame rate], so it goes next to highfps_fix; frame_rate.c turns it off without the
real-time step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 18:11:32 +01:00
Valiantsin DzerakhandClaude Opus 5.5 bb8b4b1797 Turn the recorder thread on by default on AMD GPUs too; vk_recorder = 0 turns it off where the device is lost
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 19:25:37 +03:00
Valiantsin DzerakhandClaude Opus 5.5 27a63dfb0f Merge pull request #1065: Xbox prompts at every game resolution the setup lays the UI out for (cdonatom, #378)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 18:59:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1c1ff975f3 Default dynamic_res to 1 so the game keeps its own dynamic resolution
With dynamic_res at 0 by default the fixres set held the scene at 100 % for every player, the reason #573 was turned
down. The default is now 1, so the set stays off unless a player turns dynamic resolution off in the menu or
totk.ini, and the Steam Deck profile no longer needs its own entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 18:20:31 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b6738cf41b Merge pull request #916: dynamic resolution as a setting, on by default, and a scene past 4096 wide (#573 by ProSep, carried by itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 18:20:31 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3e037f0044 Keep the shadow log of players without sync_ahead as it was, sort the new setting names, and fix the sync_ahead frame-time sentence
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 17:55:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b2db7809b4 Merge pull request #917: let the game run one frame further ahead of the GPU, sync_ahead, off by default (#676 by ProSep, carried by itaskaev2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 17:55:23 +03:00
Carlos DonatoandClaude Opus 5.5 fb34177cfd Make the Xbox prompts for every game resolution the setup lays the UI out for (#378)
The setup wrote romfs-patches-xbox and romfs-patches-xbox-label for 16:9 only, so prompts = xbox on a 21:9, 32:9,
16:10 or 3:2 screen (the Steam Deck's 1280x800 among them) kept the game resolution at 1920x1080 (cfg.c) or, with
output_res set to the screen's shape, fell back to the Switch prompts. #979 fixed this for prompts = pc; this extends
the same mechanism to both Xbox folders, the shared-files option of #378 by way of #979's --reuse.

- The setup builds romfs-patches-xbox-<w>x<h> and romfs-patches-xbox-label-<w>x<h> for each of ASPECT_SIZES, from
  their 16:9 folder with --reuse, as it does for romfs-patches-pc-<w>x<h>.
- romfs.c overlay_init: at a game resolution of another shape any prompts' folder loads from <folder>-<w>x<h> in place
  of romfs-patches-<w>x<h>, not only the PC one; without it the Switch prompts stay, and the log names the missing
  folder and the command that makes it. romfs_shaped_pc_ready becomes romfs_shaped_prompts_ready(folder, w, h).
- cfg.c: the display-shaped output_res default applies with prompts = xbox when the folder of the pad layout
  (romfs-patches-xbox with the Nintendo layout, romfs-patches-xbox-label with any other) is there for that size.
- The menu's note for a missing shaped folder reads "off at this game resolution (no layout made for it)" in every
  menu language, since 16:9 is no longer the only shape with prompts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 15:53:49 +01:00