The deferred lighting shaders soften the sun shadow with four compares around the receiver, offset by element 56 .xy of
their lighting block. The offset is in UV and the game sized it for its own 960x960 cascades, so with shadow_scale above
1 it spans that many more texels and the near cascade shows four separate copies of each edge. Translator patch 0011
multiplies those reads by the support buffer's new shadow_spread field in fragment shaders that sample a 2D array
shadow texture, leaving fp_c4 (the cascade matrices) alone. support_fill writes 1 / shadow_scale there, so the spacing
stays the game's in texels; at shadow_scale 1 the shaders behave as before. The support buffer grows to 1440 bytes and
build_xlate.py expects eleven patches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The deferred lighting shaders take the sun shadow as four explicit-LOD compares on the cascade array. Translator patch
0010 turns every explicit-LOD compare on a 2D array texture into a PCSS lookup when the support buffer's new pcss
field has x above 0: eight raw depth fetches within pcss.w find the blockers, (receiver - blocker) * pcss.x gives the
penumbra width clamped to pcss.y..pcss.z, and eight compares on a disc of that radius average to the result. With x at
0 the original single compare runs behind a branch. Radii are in UV, so they hold at any shadow_scale.
The support buffer grows to 1424 bytes; support_fill writes the field from pcss (percent of the default width, 0 to
200, default 0; TOTK_PCSS_K overrides the factor at 100 percent, default 0.5). build_xlate.py expects ten patches. The
setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TotK fills a full-resolution G-buffer with a B10G11R11 scene colour, an R32F linear depth and a D32F depth, lights it
in half resolution, and composites the lighting into the scene colour in one pass whose only target is that colour,
with a D16 class depth. vk_contact.c recognises both passes, and when the pass after the composite begins (or a
dispatch or copy comes first) runtime/shaders/contact_shadow.comp marches each pixel 16 steps toward the sun through
the linear depth and darkens the scene colour where nearby geometry blocks the ray: the small shadows at feet, under
stones and in grass that the shadow maps miss. Transparent surfaces, the sky and post-processing come after.
The projection, far plane and sun direction come from the fragment stage's 0x940-byte camera block (c4): c4[7].x,
c4[8].y, c4[14].y, and the first cascade's depth row c4[44].xyz, whose negation points toward the sun. Scene colour
images get STORAGE usage while the setting is on.
contact_shadows (percent strength, default 0) is in totk.ini.example and on the Screen tab of the menu (English and
Russian). TOTK_CONTACT_DEBUG=1 shows the shadow factor in grey instead of the frame. It costs about 0.45 ms per frame
at a 3840x2160 scene on an RTX 4080 SUPER.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The sun's shadow cascades end at 20, 40, 80 and 160 m: the depth shadow parameter object (main+0x6fa3c0) registers
depth_shadow_near_0_1..3 and depth_shadow_far_0 as immediates, and the field's .bgsdw files do not override them. The
new cascade patch set reads the four distances from patch page +64..+76 instead, and shadow_range (percent, 50 to 400,
default 100) writes them there at start, so the visible steps where shadows turn softer move away from the player. It
spreads the shadow map over more ground, which shadow_scale pays back. Only patches-v143.txt has the set; on 1.2.1 the
setting logs that and does nothing.
The setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TotK draws its sun cascades into a 960x960 DEPTH16 array of 4 layers, and its static shadows into 1440x1440 and
720x720 arrays of 2, whatever the output resolution, and shrinks the cascades under load. shadow_scale (1 to 4,
default 1) creates those images that many times larger on each side: passes into them scale the game's viewports,
scissors and support-buffer viewport size, and copies scale their regions, so the game is unaware of it. Images the
CPU writes or that alias pool memory keep their size. When the maps are enlarged, depth-compare samplers filter
linearly, because the game's few nearest taps are spaced for its own texels and leave hard, stepped edges otherwise.
aniso (game, 2, 4, 8, 16; default 16) raises anisotropic filtering of linear mipmapped colour samplers; depth-compare,
nearest and unmipmapped samplers keep the game's setting.
Both are in totk.ini.example and on the Screen tab of the settings menu (English and Russian).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every Switch button and the eight stick directions the keys drive get two key cells and a controller cell under the
button layout. A cell takes the next key, mouse button or controller button pressed; a key in use moves over, a
controller button swaps. The tab writes bind_ lines (new: bind_LSTICK_* / bind_RSTICK_*, key:default, pad:default) and
input_win.c builds the tables again when one changes, so remapping applies while the game runs. More keys can be
bound: Enter, Backspace, right Shift and Ctrl, Alt, the numpad, punctuation, F2-F7, F9, F12, mouse buttons 4 and 5.
Alt alone no longer enters the window menu loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gamepad map was by position only, so on an Xbox pad the button labelled A pressed Switch B. pad_layout = auto
(default) keeps the Nintendo layout for a pad whose east button SDL reports labelled A and uses the Xbox layout (south
A, east B, west X, north Y; cross A on a PlayStation pad) for the others; nintendo and xbox force one. It applies at
once; bind_ lines name physical buttons and apply on top of either layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The file pointed at the Advanced tab for them; it now has every key the tab shows, grouped as the tab groups them, and
a [diagnostics] section for trace and the flight recorder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bug form asks for the version on the settings menu's title line instead of the window title, which has none,
points to Copy system info and to logs\totk.log. CONTRIBUTING lists the lifter's differential tests and the commit
message style for pull requests. docs/maxwell.md cites nxnative's notes by name, since nxnative rewrote them and the
line numbers pointed nowhere, and pins the MacNativeGames shorthand to the commit its line numbers were read at.
totk.ini.example gains menu_lang and input_record and points to the menu's Advanced tab for the other keys. AGENTS.md
asks comments to cite upstream code by project, file and function. README: Linux and the Steam Deck are the platforms
planned.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments cited codes from local notes (port-lessons P1, backlog), task labels (T6c1-T6c3, M4), bare upstream commit
hashes and issue numbers, a file that no longer exists (nvn_api.c, now nvn_api_*.c), a generated file (main_0103.c)
and line numbers into upstream files that refs/ has moved past, so they pointed at unrelated code. Those now name the
file, function or project and say what the cited code does. Attribution of copied code keeps its pinned commits.
Corrected facts: TOTK_REPLAY_ASYNC defaults to 0, and the shader cache, pipeline cache and pipeline keys live next to
totk.exe, not in build/v121.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The README is a front page now: a general status, a short feature list, install steps from a release, credits as a
list of links that points to THIRD_PARTY_NOTICES.md, the build steps last. The licence table moved into the notices.
The build steps take the game version as <ver>; 1.4.3 is the primary version in the architecture doc, which also
gains the zstd host decoder, the settings table and menu, spin gates, the uniform snapshot and the resolution patches.
Controls list F1, F10, F11 and the menu keys; the tester guide and CONTRIBUTING point to logs\totk.log.
THIRD_PARTY_NOTICES.md: the four code rows that sat in the installer table move to the main table, the zstd rows
cover ov_zstd.c and the release package, the MacNativeGames resolution commit is given in full, the NVN proc list and
the compiler runtime of a source build are listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A player who starts totk.exe from Explorer or a shortcut had no log to attach to a report: the log went only to stderr.
A game run whose stderr is not a file (a console or a pipe) now also writes logs\totk.log, keeps the four earlier
runs as totk.1.log to totk.4.log, and stops the file at 64 MiB. Runs whose stderr is a file (run_game.py, 2> file) and
the tool modes write no extra file. Lines from before the file opens (mem_init comes first so the CRT heap stays out of
the guest address space) wait in a static buffer.
Crash reports, fatal errors, IPC and SVC diagnostics, guest debug output and the boot: lines now go through
rt_logf / rt_log_raw, so they reach the file too. Open log folder in the menu opens the folder of the file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Write-watch queries skip frozen 2 MiB regions, but a region was frozen only when it lay wholly in imported pools and
wholly committed. NVN pools are small and not 2 MiB aligned, so most regions also hold other guest memory or reserved
holes: in town 340 of the 436 MiB queried every frame lay in regions nothing had written for 300 submissions. On the
GTX 1050 Ti laptop the queries took up to 2.2 ms a frame, 1.4 ms of it in queries that found no write.
mem_freeze now makes the committed pages of a region read-only when all of them are read-write and leaves reserved
holes alone; thaw_locked already restored such regions run by run. The pool rule is gone: the only kernel writes into
guest memory are file reads, which thaw their buffer first, and every user-mode write faults and thaws as before.
TOTK_FREEZE_IDLE defaults to 60 (in a fight 100 of 257 queried MiB lay in regions idle for 30-299 submissions; a thaw
by a write costs about 60 us on the RX 9070 machine), and import mode freezes too, for the texture checks of APUs.
RX 9070, per frame after load: town 436 -> 96 MiB queried, 0.68 -> 0.38 ms; fight 168 MiB, 0.45 ms (257 MiB, 0.57 ms
with the new rule at 300 submissions), about 20 thaws a second. TOTK_MEMORY=verify in the fight: 3.65 million pages compared, 0 mismatches. The gfx-abi probe
covers a region with reserved holes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TotK rewrites per-object uniform blocks on other threads soon after it submits the frame that reads them, and the
replay records for milliseconds after the submit call, so late draws could read another object's matrix (phantom
rocks, a flat far field). The guard in nvn_api_core.c obs_release_read only knows 1.2.1's producer. runtime/vk_usnap.c
copies every uniform range of imported pools that the submission binds into an arena, after MacNativeGames'
TOTK_UBO_SNAPSHOT, and ubo_info binds the copy; ranges a submission still in flight writes are left out, and GPU writes
within the submission drop the copies they touch. TOTK_UBO_SNAPSHOT=0 binds live memory; =ab alternates.
Town on an RX 9070 (in-launch A/B, 70 s): 2235 ranges, 1.9 MiB per submission in 0.49 ms; interval +0.02 ms, replay
+0.19 ms. The sort of the ranges was half of the cost with qsort (0.53 ms for about 10,000 bindings) and is a radix
sort now. fight2 interval within noise. The four probes passed on 1.4.3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The generator emits a guest poll such as `ldr w9, [x19]; cmp w9, #1; b.eq` as a plain C load, and clang hoists it out
of the loop: the lock wait in f_7001fa0e2c compiled to `cmp; jne; jmp .`, so a thread that found the lock held spun
forever after its holder released it. A fight run hung this way in 3 of 13 launches on an RX 9070, with the UBO
snapshot on and off; gdb showed the thread on that `jmp` in every sample. The gate is an opaque call on every
back-edge of the 868 loops tools/spin_waits.py lists, so each pass reloads memory: the exe goes from 182 self-jumps to
148, and 144 of those are the game's own `b .` instructions. 8 of 8 fight runs then passed; tests/diff/func.py with
--patches passed 5470 cases on 878 functions, and the four probes passed on 1.4.3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The lifted decoder ran its copy loops as chains of small functions. On the island and fight routes TOTK_ZSTD_CHECK=1 decoded every call both ways with no difference; the host took 0.72 s where the guest decoder took 1.99 s. Load time and fps on an RX 9070 and a 7900X did not change: the gain is CPU time on the loading threads, for machines with fewer cores. The caller at main+0x547a04 stays on the guest decoder: it resets a static DCtx with which the game's zstd rejects some frames libzstd decodes, and the game relies on that result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The FP helpers compared c->fpcr with a cached copy before every operation to resync MXCSR lazily. MXCSR now
follows FPCR.FZ at once: MSR FPCR calls rt_fpcr_sync, and so do rt_call (thread, fiber and host entry into guest
code), fiber resume (FIBER_FLAG_FLOAT_SWITCH fibers keep their own MXCSR) and the differential test harness per
case. op and vop only test FPCR.RMode for the slow path, and their redo check is one ordered-not-equal compare of
|r| with the smallest normal, the same NaN-or-smallest-normal set as before.
Hot guest code shrinks by about a quarter (132 functions holding half the guest cycles, 1.4.3); fight frame time
moves 1-3%, inside the run-to-run spread. lift, simd, func, atomic and flags_check pass on 1.4.3; simd.py fails
without the harness sync.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With TOTK_TRACE=sched, TOTK_CRIT=<lo>-<hi> records every state change and wake of the guest threads and every
present over those frames (runtime/kernel.c crit_add from acct() and wake(), crit_frame at the present) and writes
them to TOTK_CRIT_OUT at the last frame. tools/crit_path.py walks back from each present through the waits to the
thread whose signal ended them and splits the frame interval by thread and state; the sums equal the interval.
A 1.4.3 fight: with the replay on the submitting thread the path is 7.3 ms of replay on the render thread and 4.3 ms
of guest code; with TOTK_REPLAY_ASYNC=1 it is 10.1 ms of guest code through the fork-join of the main thread and five
workers, at the same frame interval.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every lifted instruction read and wrote c->x[n] and c->sp, so each register passed from one guest instruction to the
next went through a store and a load, and clang could not keep it in a host register across a guest store.
recomp/regs.py now copies the six most used X registers and SP of a function into locals at its entry. A forward pass
over the function's flow tracks which locals changed since the last sync, and only those are stored back before a
call, an SVC, a trap, a return or a tail exit. After an SVC every local reloads; after a call only X0-X18 and X30,
since AAPCS64 has the callee preserve X19-X29 and SP. TotK does not break that: main and subsdk0 import neither
longjmp nor the unwinder, sdk's have no direct callers, and the runtime writes no register above X3 except X30.
gen.py --no-callee-saved-trust reloads them too, --reg-locals sets the count. Functions with an unresolved computed br
keep their registers in the Cpu, as they keep NZCV.
All registers in locals was slower than none: clang spills them to the stack and the syncs stay. Over 300 hot
functions, 4-6 locals gave the fewest instructions and memory operands.
1.4.3 .text 299 -> 266 MiB. Fight bench (bench-fight2-2026-10-27b, frames 5400-7500, uncapped): 11.30 and 11.92 ms vs
13.5-13.9 on main; frames 2400-5300 11.24 and 11.36 vs 13.25. Without the callee-saved trust 12.58 ms.
tests/diff/func.py: 0 failing on 1.4.3 (889 functions, 583 with calls) and 1.2.1 (810); a plan with no spills fails
at once. Probes kernel, vkexec, nvn-tex and shader pass in both versions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every flag-setting instruction packed N, Z, C and V into c->nzcv and every reader unpacked them. recomp/flags.py
now runs a reaching-definitions pass per function: a compare stores its operands in a local Flags F, and a reader
whose definitions are all of one kind computes its condition from them, so cmp and b.cond become one host compare.
CCMP, FCMP, MSR NZCV and ADCS write the packed form, which readers reached by several kinds also use. Calls and
returns publish nothing (AAPCS64 neither passes nor preserves NZCV); tail branches, falls into the next function and
br through rt_dispatch publish c->nzcv, since discovery can start a function inside another one. Functions with an
unresolved computed br keep flags in c->nzcv.
1.4.3 main: 492k direct and 89k packed flag reads, .text 342 -> 299 MiB. Fight bench (bench-fight2-2026-10-27b,
frames 5400-7500, uncapped) 13.15 and 13.63 ms vs 13.9 before. tests/flags_check.py checks the new helpers against
the packed ones; tests/diff/func.py no longer compares NZCV, which generated code leaves untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>