Commit Graph
21 Commits
Author SHA1 Message Date
itaskaev2andClaude Opus 5.5 24571ec0b0 Add soft sun shadows (PCSS) through a translator patch
The deferred lighting shaders take the sun shadow as four explicit-LOD compares on the cascade array. Translator patch
0010 turns every explicit-LOD compare on a 2D array texture into a PCSS lookup when the support buffer's new pcss
field has x above 0: eight raw depth fetches within pcss.w find the blockers, (receiver - blocker) * pcss.x gives the
penumbra width clamped to pcss.y..pcss.z, and eight compares on a disc of that radius average to the result. With x at
0 the original single compare runs behind a branch. Radii are in UV, so they hold at any shadow_scale.

The support buffer grows to 1424 bytes; support_fill writes the field from pcss (percent of the default width, 0 to
200, default 0; TOTK_PCSS_K overrides the factor at 100 percent, default 0.5). build_xlate.py expects ten patches. The
setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 16:00:23 +01:00
itaskaev2andClaude Opus 5.5 4af60604de Add screen-space contact shadows
TotK fills a full-resolution G-buffer with a B10G11R11 scene colour, an R32F linear depth and a D32F depth, lights it
in half resolution, and composites the lighting into the scene colour in one pass whose only target is that colour,
with a D16 class depth. vk_contact.c recognises both passes, and when the pass after the composite begins (or a
dispatch or copy comes first) runtime/shaders/contact_shadow.comp marches each pixel 16 steps toward the sun through
the linear depth and darkens the scene colour where nearby geometry blocks the ray: the small shadows at feet, under
stones and in grass that the shadow maps miss. Transparent surfaces, the sky and post-processing come after.

The projection, far plane and sun direction come from the fragment stage's 0x940-byte camera block (c4): c4[7].x,
c4[8].y, c4[14].y, and the first cascade's depth row c4[44].xyz, whose negation points toward the sun. Scene colour
images get STORAGE usage while the setting is on.

contact_shadows (percent strength, default 0) is in totk.ini.example and on the Screen tab of the menu (English and
Russian). TOTK_CONTACT_DEBUG=1 shows the shadow factor in grey instead of the frame. It costs about 0.45 ms per frame
at a 3840x2160 scene on an RTX 4080 SUPER.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:29:53 +01:00
itaskaev2andClaude Opus 5.5 386e70453b Add a shadow cascade range setting for 1.4.3
The sun's shadow cascades end at 20, 40, 80 and 160 m: the depth shadow parameter object (main+0x6fa3c0) registers
depth_shadow_near_0_1..3 and depth_shadow_far_0 as immediates, and the field's .bgsdw files do not override them. The
new cascade patch set reads the four distances from patch page +64..+76 instead, and shadow_range (percent, 50 to 400,
default 100) writes them there at start, so the visible steps where shadows turn softer move away from the player. It
spreads the shadow map over more ground, which shadow_scale pays back. Only patches-v143.txt has the set; on 1.2.1 the
setting logs that and does nothing.

The setting is in totk.ini.example and on the Screen tab of the menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:06:58 +01:00
itaskaev2andClaude Opus 5.5 bfb4933531 Add shadow map resolution and anisotropic filtering settings
TotK draws its sun cascades into a 960x960 DEPTH16 array of 4 layers, and its static shadows into 1440x1440 and
720x720 arrays of 2, whatever the output resolution, and shrinks the cascades under load. shadow_scale (1 to 4,
default 1) creates those images that many times larger on each side: passes into them scale the game's viewports,
scissors and support-buffer viewport size, and copies scale their regions, so the game is unaware of it. Images the
CPU writes or that alias pool memory keep their size. When the maps are enlarged, depth-compare samplers filter
linearly, because the game's few nearest taps are spaced for its own texels and leave hard, stepped edges otherwise.

aniso (game, 2, 4, 8, 16; default 16) raises anisotropic filtering of linear mipmapped colour samplers; depth-compare,
nearest and unmipmapped samplers keep the game's setting.

Both are in totk.ini.example and on the Screen tab of the settings menu (English and Russian).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:47:47 +01:00
Valiantsin DzerakhandClaude Opus 5.5 8691f6d724 Remap keys, mouse buttons and controller buttons from the Controls tab
Every Switch button and the eight stick directions the keys drive get two key cells and a controller cell under the
button layout. A cell takes the next key, mouse button or controller button pressed; a key in use moves over, a
controller button swaps. The tab writes bind_ lines (new: bind_LSTICK_* / bind_RSTICK_*, key:default, pad:default) and
input_win.c builds the tables again when one changes, so remapping applies while the game runs. More keys can be
bound: Enter, Backspace, right Shift and Ctrl, Alt, the numpad, punctuation, F2-F7, F9, F12, mouse buttons 4 and 5.
Alt alone no longer enters the window menu loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:53:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ba0f33e044 Pick the gamepad button layout by the pad's labels, with a Button layout row on the Controls tab
The gamepad map was by position only, so on an Xbox pad the button labelled A pressed Switch B. pad_layout = auto
(default) keeps the Nintendo layout for a pad whose east button SDL reports labelled A and uses the Xbox layout (south
A, east B, west X, north Y; cross A on a PlayStation pad) for the others; nintendo and xbox force one. It applies at
once; bind_ lines name physical buttons and apply on top of either layout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:20:03 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d3fd4c5944 Call the replay "GPU frame prep" in the menu and the overlay, say it adds up to one frame of latency, and name GPU time "GPU busy per frame"; the run_game.py example runs build/v121
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:49:34 +03:00
Valiantsin DzerakhandClaude Opus 5.5 f4619f7b45 Add a VERSION file with the port's semver, shown beside the installer title and on the game menu's title line with the game update
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:40:01 +03:00
Valiantsin DzerakhandClaude Opus 5.5 89cc960f09 Menu navigation with the left stick and back from the bottom buttons; AMD sensors and the picture lines in the performance overlay
The left stick now moves the menu cursor as the D-pad does (ImGui only scrolled with it). The page's rows are a
direct NavFlattened child of the menu window: behind a second child level ImGui did not clip them, so up from
Continue went to the tabs and down from the tabs to Continue.

The full overlay reads temperature, board power, clock and GPU load from ADL's PM log on AMD GPUs (matched by PCI
bus), and shows the window, game image and 3D scene sizes, the scaling to the window (FSR and its sharpness), the
frame limit and the presentation mode in use.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 15:21:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7abdbc90ac Render the game above 1080p and scale it to the window with FSR 1
The output and scene patch sets make the game read its output, swapchain and scene sizes from the patch page
(MacNativeGames' sites for 1.2.1 and 1.4.3); resolution.c picks them from TOTK_OUTPUT_RES and TOTK_RENDER_SCALE and
grows the HeapDef texture heap, its parent and the application pool to match. vk_fsr.c runs AMD FSR 1 EASU and RCAS
on the present when the window is larger than the game's output (TOTK_UPSCALER, TOTK_SHARPNESS).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 13:40:34 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6b65fb6c0e Keep sampled-texture descriptors between draws while the slot, sampler, submission and feedback pass stay the same
tex_info resolved the slot, built a view key, probed the view table and looked up the sampler for every texture
binding of every draw. A direct-mapped memo keyed by handle, resource type and separate returns the descriptor while
vk_texture_slots_gen, vk_sampler_gen, the submission epoch and (with feedback-loop images) the pass are unchanged;
storage images are not kept. TOTK_TEX_MEMO=0 turns it off, =check recomputes every hit (a fight run with it and
TOTK_SHADER_MEMO=check stopped on nothing). Against main, profiler on, no bind stats: fight replay 13.9 to 11.9 ms per
frame, render thread busy 16.3 to 14.6 ms, CPU-bound windows 15 to 9; field replay 9.5 to 8.2 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 22:50:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b273005901 Look up texture types only for the slots a shader's translation reads, and reuse the previous draw's pipeline while its state repeats
answers_for looked up the type of all 64 texture and image handles of a stage whenever one changed; the use mask of the
first shader of each program stage now limits it to the slots that select the variant, with a generation per slot and
the texture lock taken only on a miss (texture type recomputations per draw 0.39 to 0.05 in fight). prepare_draw keeps
the previous draw's pipeline info while the pipeline state is equal (TOTK_PIPE_MEMO), and reads the clock only for
draws that may wait. Fight on the 7900X: replay 15.7 to 14.0 ms per frame, 53.3 to 58.7 fps; field 11.1 to 9.5 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 22:31:53 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1385e7af9b Drop Portuguese from the game language list, which TotK does not ship, and note under Presentation the mode the swapchain got when it differs from the setting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:55:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7597bf0517 Add the Advanced tab: scheduling, shader, texture, render fix, Vulkan and diagnostics keys, log folder, system info copy and reset of all settings
Reset asks first in a modal; B and Esc close the modal instead of the menu. The validation layer row is greyed out when the layer is missing. Option rows get whole-pixel heights: with a fractional height ImGui's truncation grew the page a pixel per row scrolled out of view, which cut off a row scrolled to the bottom. The first row taking the cursor scrolls the page to its top, so text and a heading above it show.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:55:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 e6116bc8bb Draw the full performance overlay from perfmon: CPU, GPU and memory load, temperatures, frame times with a graph and the render thread's waits
The panel's columns are as wide as the widest value they can show and the numbers are right-aligned, so the panel keeps its width while the numbers change. It sits in front of the open menu. FPS mode keeps its one line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:55:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 05ea4f0e56 Add the performance overlay's sampling (perfmon.c), system info for bug reports (sysinfo.c), their Windows calls, GPU timestamps on demand, and option row helpers: buttons, group headings, greyed-out rows, focus by key
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:55:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 b1cbbb93a6 Make the frame limit a setting: 30, 60, 120, 144 or the monitor's refresh rate
TOTK_FPS_LIMIT (fps_limit in totk.ini, live, menu row on the Game tab) replaces the 30/60 choice of TOTK_FPS60. The
pacer holds frames to the limit in nanoseconds instead of 60 Hz ticks; the real-time step has no lower bound, so game
speed stays 1.000 above 60. `display` follows the exact refresh rate of the window's monitor (QueryDisplayConfig),
measured again when the window moves or the display mode changes. A limit of 30 switches the patch set fps60 off as
before; unset, the older fps60 = 0 still means 30. Above 60 needs the real-time step and is marked experimental.

The vsync event stays at 60 Hz: on 1.4.3 the title runs at 144 fps with it, so the game does not wait for it each
frame. Field on machine A: 69-88 fps, CPU-bound (GPU 3.4 ms per frame).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 20:39:13 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c757a42798 Add the frame rate overlay: TOTK_PERF_OVERLAY fps shows the frame rate in the top right corner, full adds the mean and longest frame time of the last half second, F10 cycles the modes and saves the choice
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:50:45 +03:00
Valiantsin DzerakhandClaude Opus 5.5 81af84d327 Correct the descriptions of fix_zero, fix_c0, split_draws, tex_alias, lod_guard, vk_dyn_vertex and pipe_wait in the menu catalog, polish the Russian wording, and make menu_text's cached language atomic
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 09:43:15 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c79c614cee Add the menu and overlay text to the host catalog in English and Russian, menu_text for the menu language, and plat_ui_language for the Windows UI language
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 09:40:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 19c9b648d1 Add the recompiler, Windows runtime, tools and docs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 22:27:54 +03:00