Commit Graph
470 Commits
Author SHA1 Message Date
Valiantsin Dzerakh be94fe0aa9 Merge branch 'dev' into task/flushhull 2026-11-04 18:42:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 835310412c Copy a mirrored pool's flushes as exact ranges, so far-apart small flushes stop copying the pool between them
nvn_pool_flushed kept one span from the lowest to the highest flush of a pool and mirror_sync copied all of it. In
Kakariko one 252 MiB pool copied 22,121 MiB for 847 MiB flushed, in spans of up to the whole pool. Over PCIe 3.0 x8
(RX 6600, Ryzen 5 5500, issue #698) a typical span takes about 30 ms of GPU time, which fits the frame spikes there.

A pool now keeps up to 32 sorted ranges and merges the two nearest above that. Writes between ranges still reach the
mirror through the write watch. Over a walk in Kakariko the upload fell from 472.8 to 125.5 MiB and no flush range
reached 16 MiB. TOTK_FLUSH_SPAN=1 restores the span. The mirror summary gains a line with the upload by source, and
--probe-vkexec checks the range list and that two far-apart flushes copy only their pages.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:41:54 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9dd50131ca Start function-local variables at 0 on Mesa drivers only
SPIR-V leaves a register read before any write undefined and Mesa folds undefined values freely. The unconditional patch 0014 guarded against that and was taken out in #701 because the whole picture shook with DLSS on NVIDIA. Patch 0016 brings the zero start back behind a zero_locals job flag, which vk_caps_driver turns on for RADV, ANV and NVK. TOTK_ZERO_LOCALS overrides it, and gfx_shader_set_host mixes it into the translator identity so the variant has its own cache keys.

FXAA_FS gains the flag-on hash of the game's FXAA shader, so vk_dlaa_skip_draw knows it on Mesa too. A game run with TOTK_ZERO_LOCALS=1 on an RX 9070 produced that hash; a TOTK_FXAA=0 run logged no skip with either hash, so the switch itself is not confirmed.

All 29736 stored 1.4.3 inputs translate with the flag off and on, 0 spirv-val failures. FXAA hashes to 5c43ae18948d52cb with the flag off and aad42238801d31d8 with it on. Flag-on output matches the old translator byte for byte on a sample of 312 shaders. Not run on a Mesa driver.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:05:21 +03:00
Valiantsin Dzerakh 74058ac053 Merge branch 'dev' into task/grassfire 2026-11-04 16:49:47 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1a9d089a3d Write grass maps back at fence waits so fire spreads through grass, and batch the copies
TotK's fire spread reads its 260x260 RG8 grass maps after a fence wait with no invalidate. The fence write-back took targets up to 64 KiB only, so the CPU saw stale maps and fire died where it hit (#132).

A target over wb_fence_limit now goes back unless the GPU drew it in each of the last 16 frames. Raising the limit instead pulled in four 256x256 targets drawn every frame, about 2.7 ms a frame.

Every level and layer of every texture in a write-back now shares one upload batch and one wait. A burst of 9 grass maps took 7.8 ms with one round trip per level and takes 2 to 2.5 ms. The fence write-back on the field replay fell from about 45 to 22 ms per second of play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:49:46 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6c19856136 Merge task/fuseicon: wait for the pipelines of item icon captures instead of skipping their draws
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:33:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a248cc9f54 Wait for the pipelines of item icon captures instead of skipping their draws
The icon capture draws into a colour target rendered for the first time, with the per-frame depth buffer. Under
pipe_skip any and fullscreen the recent depth made the pass look per-frame, so draws with a pipeline still building
were dropped and the icon kept missing parts (a fused weapon without its blade) until the item was captured again.
vk_exec_targets_recent now ignores a recent depth target while a colour target is rendered for the first time.

On fight2 with a warm driver cache no draw waited. With a cold cache the first world frame after loading waits for
the scene's new HDR target (2.9 s without prepared shaders), and one 64x64 capture waited 29 ms in the fight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:33:07 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a1964a0c31 Free texture pin copies once no recording names them
Every texture initialization got a 128-byte host copy for recordings to point at, kept for the whole run. The game
initializes its transient targets again every frame (about 29 new copies a frame on 1.4.3), so host memory grew by
about 44 MiB per minute of play, standing still too, until the commit limit ended long sessions (#670).

Each pin now counts the recording copies whose ops name it: counted in flatten_recording, uncounted when a copy or a
per-submission clone is freed. A pin with no copy left is freed NVN_PIN_AGE (1200) submits after its last use, so a
recording still in progress keeps its pins, and never while the replay holds it as a current render target, which
carries over to the next submission and is compared by pointer. TOTK_PIN_SWEEP=0 keeps every copy.

A 300 s standing-still run on the field save: host memory without VRAM grew 5 MiB, against about 220 MiB before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 15:00:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 06005d40d8 Merge task/pgo: build the game code with an execution profile from the release
1.4.3 profile-guided build: fight2 -12.5% per frame, a fight outside the training -5.8%. The profile lives in
build/pgo (not in the repository) and ships in the Setup's data/; installs without one build at -O1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 11:08:02 +03:00
Valiantsin DzerakhandClaude Opus 5.5 282130a128 Build the game code with an execution profile when the release has one
build_game.py --pgo gen builds an instrumented totk.exe (llvm-mingw: MSYS2's clang has no profile runtime) that adds
its counts to <out>/pgo/*.profraw every minute and at exit; plat_exit ends the process with ExitProcess, which skips
compiler-rt's atexit write. tools/pgo.py merges them into build/pgo/pgo-<ver>.profdata with a record of the recomp/
tree it fits. build_game.py --pgo FILE compiles the generated code at -O2 and the runtime with that profile.

make_release.py ships build/pgo's profiles in data/ and builds the runtime libraries with them; the installer passes
the update's profile to build_game.py, and builds at -O1 without one. Profiles name lifted functions by address and
hold branch counts and control-flow hashes of the generated C, no bytes of the game.

1.4.3 on machine A, mean frame by world clock: the fight2 bench 11.49 -> 10.06 ms (-12.5%), a fight outside the
training 13.00 -> 12.24 ms (-5.8%); every window CPU-bound. The profile was trained on scripted runs and 24 minutes
of play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 11:04:31 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4b712a83e4 Log the port and game version at the top of totk.log
Two reports today attached a log from another build than the one they were about: #659 a 0.3.4 log for a 0.3.7
regression, #683 a pre-0.1.6 log from a folder named after the 0.3.7 setup. Telling that needed matching log
strings against release tags. The line follows mem_init, the first point where rt_log may run, so it is the second
line of the file after "cfg: read".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:58:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 7be68ec5e1 Turn replay_async off by default again
83d2302 turned it on from one measurement where the game waits for the GPU (a GTX 1650 in the Depths, #88).
Nobody checked frame pacing at the 60 fps cap with GPU headroom or on a 6-thread CPU. #659 (GTX 1660 Ti,
i5-9400F, GPU at 26 %) reports uneven motion on 0.3.7 at a steady 60 fps that 0.3.4 did not have, and this
is the only change in the frame path between the two releases that reaches that machine. Players it helped
set replay_async = 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:50:38 +03:00
Valiantsin DzerakhandClaude Opus 5.5 9e5a817916 Read the mouse mode with its default so direct is on without a totk.ini line
direct_mode read TOTK_MOUSE_MODE with cfg_get, which is NULL when the player never set it, so a fresh totk.ini kept
stick emulation (and its speed cap) while the menu showed Direct. cfg_value gives the settings table's default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:52:06 +03:00
Wintego cb628b08b7 Add keyboard and mouse button prompts (prompts = pc)
The Button prompts row gets a third choice, PC: every button glyph of the game's button font and every image of the
button guide is drawn as the key or mouse button the keyboard defaults press it with (E, Shift, Space, left click, Q,
R, right click, F, Tab, M, 1 to 4, W A S D, Ctrl, C) and the right stick as the mouse, whatever the pad layout. The
setup writes romfs-patches-pc next to the Xbox folders (make_romfs_patches.py --prompts pc, button_icons.py pc_icons);
--binds <totk.ini> draws the keys of its bind_ lines instead. At a game resolution of another shape the game takes
romfs-patches-pc-<w>x<h> (--prompts pc --aspect) in place of romfs-patches-<w>x<h> when it is there.

(cherry picked from commit 3f81cf02be664100bd9c569c53588d620d90b527)
2026-11-04 08:36:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 56b3cd1246 Drop the keyboard prompts of #483 in favour of #585
#483 draws the stick glyphs on the wrong code points: U+E056 and U+E057 (the stick presses) get WASD and the mouse,
U+E05E and U+E05F (the sticks) get Ctrl and C, and both left-stick HUD images show Ctrl. #585 maps them by the game's
font and keeps each glyph's advance.

This reverts commit cd35ffa.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:35 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3676e299c5 Add a shake key that detaches a fused part held with Ultrahand
G (bind_SHAKE, keys only) swings the right stick left and right for 0.8 s, longer while held, so a part comes off
without shaking the arrow keys by hand. The pad keeps shaking its own stick. Remappable in the Controls tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:35:12 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d0579731c5 Make the direct mouse camera the default and add a Controls row for the menu pointer
mouse_mode now defaults to direct: on 1.4.3 the camera turns by the raw mouse motion; 1.1.0 and 1.2.1 have no hooks
and keep stick emulation, and no setting changes the gamepad. The Controls tab gets a "Mouse in the game's menus" row
for menu_cursor, and the mouse rows are in all four catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:18:29 +03:00
0xEmz cd35ffaf36 Show keyboard and mouse icons in the prompts when prompts = keyboard
Add keyboard and mouse button icons to tools/button_icons.py and
tools/make_romfs_patches.py --prompts keyboard, with a third 'Keyboard
and mouse' choice under Controls > Button prompts (prompts = keyboard).

Keycaps cut their labels out of the game's own text fonts, mouse clicks
and right-stick camera look draw clean mouse silhouettes, and
make_romfs_patches.py --ini reads any bind_ overrides from totk.ini.
2026-11-04 08:11:06 +03:00
Valiantsin DzerakhandClaude Opus 5.5 ff49f6b62f Keep the gamepad unchanged under the direct mouse and the menu pointer, and fix the mouse activity flags
The camera input's activity hook wrote the flags to +0x418, but the game's next instruction stores w8 over them
(1.4.3 main+0x874d80), so a mouse-only turn still read as idle. The hook now changes w8.

The free-orbit hooks rewrote the camera stick input from the last sample even in steps without mouse motion; they now
take a step only when the mouse moved in it or holds the pitch, so a gamepad-only step reaches the camera as the game
made it.

The mouse shake gesture for detaching parts is gone: three 24-count reversals fire while a held object is turned back
and forth. Arrow keys or the pad's right stick shake as before.

The menu pointer comes only while the keyboard and mouse are the device used last (input_kbm_last): a gamepad player
sees the menus as on the console. Raw mouse travel is counted while the cursor is released too, so moving the mouse
brings the pointer back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 08:10:59 +03:00
local 8ff29be86f Use the mouse in the game's menus on 1.4.3
While one of the game's menus has its focus box (the title, the save list, the inventory, Options, shops,
dialogue choices), the cursor is released from the mouse camera and shown; the item under the pointer takes
the focus as the d-pad would, a left click is A on it and a right click is B. runtime/menu_cursor.c reads
eui's screens at each pad read and moves the focus with the writes eui::BoxCursorMgr::moveBoxCursor makes,
adapted from Weeping of the Empire's totk_menu_cursor.cpp (1.0.0, MIT), with eui::ScreenMgr's instance placed
in 1.4.3 at main+0x3acf960. menu_cursor = 0 turns it off.
2026-11-04 07:56:03 +03:00
walterwhite69420 050563687b Add experimental direct mouse camera input for game 1.4.3 2026-11-04 07:55:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 0f65b4ee07 Show the game and port versions in the Discord status
The details line read "Update 1.4.3"; it now reads "Game 1.4.3 · Recomp 0.3.7".
The port version drops its +commit suffix there, the art's hover text keeps
the full one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:56:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1ec1e21d77 Use the project's own Discord application for Rich Presence
The default app id pointed at the application the feature was developed
against, owned by the pull request's author. The new one belongs to the
project, with the ring icon uploaded as the totk_512x512 art asset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:49:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1e378dd177 Keep stereo as the default speaker output
With audio_channels = auto as the default, a player whose Windows device reports six or more channels gets 5.1
without asking for it. USB headsets with virtual 7.1 and HDMI receivers or TVs set to 5.1 or 7.1 report that too,
though many of their owners listen in stereo. Stereo as the default keeps today's sound for everyone; 5.1 and auto
stay in the Sound tab and in totk.ini.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:35:52 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a732c16ce6 Merge pull request #438: 5.1 surround output (Specht2010)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:35:41 +03:00
Valiantsin DzerakhandClaude Opus 5.5 46a3b64895 Keep the console at start: until the game window opens it shows the shader prewarm
d2fbe0a freed the console as soon as the log file was open, but the game window only opens after the shader
prewarm. After an update the prewarm translates every shader again (about 5 minutes on a 24-thread CPU), and the
player saw neither a console nor a window all that time. The console release and show_console are taken back; the
window is still raised at start (#521).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:31:19 +03:00
Valiantsin DzerakhandClaude Opus 5.5 69e7bef868 Merge dev into task/discord
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:11:51 +03:00
Valiantsin DzerakhandClaude Opus 5.5 13e9ffec38 Merge pull request #455: Discord Rich Presence, off by default (avrahambenaram)
Conflicts in cfg.c (the key list) and main.c (the usage line) resolved by keeping dev's lines and adding the
Discord keys and --probe-discord.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:11:12 +03:00
Valiantsin Dzerakh 85123016c2 Merge task/smallfixes: game languages in the F1 menu (#580), versions and lows in the overlay (#587, #588), no console and a raised window at start (#208, #521)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-03 20:10:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 d2fbe0a2b1 Close the game's own console and bring its window to the front (#208, #521)
A game started from a frontend (Playnite, RetroBat, ES-DE) or a shortcut got a console beside it, and its window
opened behind other windows, out of reach without a mouse. Once the log file is open, the console is freed when no
other process shares it; a terminal launch keeps its output, and show_console = 1 keeps the console. The window is
raised at start, with AttachThreadInput when Windows refuses the foreground. rt_fatal writes only to the log, and a
console owned by the game closed with it anyway, so no error text is lost.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:09:23 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3422952e85 Show the versions, 1% low and 0.1% low in the full performance overlay (#587, #588)
The panel opens with the port version and the game update, so a screenshot in a bug report carries both. Under RAM,
after a gap, two rows on the same grid: FPS with the 1% and 0.1% lows, and the frame times. perfmon.c keeps a
histogram of frame times in 0.25 ms bins, one slice per second over the last ten seconds, and reads the lows from it
twice a second.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:09:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 beb93276eb Offer every game language the build ships in the F1 menu (#580)
The game language row listed eleven languages. 1.4.3 also ships Brazilian Portuguese (Mals USpt), and every build
ships British English, Canadian French and Latin American Spanish (EUen, USfr, USes), which ov_language already
accepted. ui_text_game_langs lists them per game build: pt-BR from 1.4.3 on, since 1.2.1 has no USpt. A row selects
only its own code, so en-GB and es-419 no longer show as English and Spanish.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:09:22 +03:00
Valiantsin DzerakhandClaude Opus 5.5 5024daf40d Merge pull request #534: DLSS / DLAA on Linux, a DLSS model choice, the real frame time and a character-trail mask (SchulzCode)
Merged on top of #566 and #594, by hand in vk_dlaa.c:
- One dlss_preset key: default keeps #594's model per mode (K for DLAA, Quality and Balanced, M for Performance, L
  for Ultra Performance); k, j or any other letter a..m takes that model in every mode, live, recreating the features
  as #534 does. The menu texts say so, with pt-BR and zh-Hans added.
- The mask pass stays on #594's camera motion (the identity and the CPU-made reprojection in dlaa_mv.comp's two
  blocks) and adds #534's outputs; it runs before the per-object pass. Where the reactive mask test
  (TOTK_DLSS_REACTIVE) ran, DLSS gets that mask instead of the characters'.
- #566 dropped the scaler_skipped/scaler_missed report, so #534's reset of it goes too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:46:27 +03:00
Valiantsin DzerakhandClaude Opus 5.5 13b602f28f Keep #594's DLSS work off for players without DLSS
The scene patch, the heap sized for the largest DLSS scene and the function-entry hook that catches the game's render
size setup were on for every 1.4.3 player; they are on now only when DLSS can run (dlaa = 1, nvngx_dlss.dll there),
and the hook gives up after 1800 presents if the setup is never seen. Everyone else keeps the game's own scene size
and dynamic resolution, as before #594.

The uniform snapshot's second copy in host memory and the per-object motion's last-frame blocks are made only while
DLSS is available: without it nothing reads them, and the snapshot goes into the device copy in one pass as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:39:49 +03:00
Valiantsin DzerakhandClaude Opus 5.5 80349df1a6 Merge pull request #594: per-object motion vectors for DLSS, Ultra Performance, live DLSS modes and per-mode presets (DizzyMan1337)
Merged on top of #566. The camera motion is #594's: its blocks in camb also feed the per-object pass, and
dlaa_mv.comp stays as on main, fed the identity and the reprojection made on the CPU in double. #566's
vk_usnap_host goes, vk_usnap_bytes serves the same. #566's scaling-draw swap, camera rune guard and output-size
scaling pass stay in vk_dlaa.c. Translator patch 0012 becomes 0015 after dev's 0012-0014.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:27:04 +03:00
Valiantsin DzerakhandClaude Opus 5.5 6dd08db962 Merge pull request #566: DLSS's picture reaches the screen, camera motion in double precision, the camera rune's half-size pass leaves DLSS armed (mictony6)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 19:23:36 +03:00
Valiantsin DzerakhandClaude Opus 5.5 3a556c5048 Give the game an amiibo's UID and model info in the Switch's layout
TagInfo took the UID as dump bytes 0..6, so the check byte BCC0 (byte 3) replaced the UID's last byte. ModelInfo had
the series and the figure type swapped, because the dump offsets were misread (0x57 is the figure type, 0x5A the
series), and the model number in the tag's big-endian order, while the game reads it little-endian. The game tells
figures of one character apart by that number, so scans gave the wrong rewards. The years of the common and register
info dates go little-endian too. --probe-services checks TagInfo and ModelInfo of a Link (Archer) dump.

The same fixes are in pull requests #519 (genres) and #582 (Gelomban6), which agree on the ModelInfo layout; their
event and feature changes are not part of this.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 16:39:50 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4df329d266 Translate the HDR highlight hue setting into Portuguese and Chinese
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 16:29:20 +03:00
Valiantsin Dzerakh 18160ef379 Merge branch 'pr/442' into task/hdrhue 2026-11-03 16:18:40 +03:00
DizzyMan1337andClaude Opus 5.5 ad3ecd8f3c Per-object motion vectors for DLSS, camera motion in double precision, Ultra Performance and DLSS presets.
Solid scene draws whose position reads an object's own uniform blocks (bones c5, place c7, c6) are drawn a second time
with a vertex shader variant (translator patch 0012) that computes last frame's position from last frame's blocks; the
game writes those into two copies that take turns, and the uniform snapshot keeps both (vk_mvprev.c). The draws are
listed during the replay and recorded through the recorder thread with repeated state skipped. Blocks whose last-frame
copies measured wrong (c9 and c11 of walls and cliffs) keep this frame's; positions without an object block (terrain,
grass) keep the camera's motion, which measured as good.

The camera motion is reprojected in double precision on the CPU: the float inverse made noise on far surfaces and a
still camera that DLSS followed into a wobble. DLSS gets Ultra Performance (a third of the output, also in the F1 menu)
and NVIDIA's recommended preset per mode (K, M for Performance, L for Ultra Performance; TOTK_DLSS_PRESET overrides).

Test switches: TOTK_MV_CHECK measures the motion vectors and DLSS's output against the picture, TOTK_DLAA_TIMES times
DLSS and the motion passes on the GPU. A reactive mask pass for transparents is included but off (TOTK_DLSS_REACTIVE):
its mask covers sky and fog too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:31:58 +08:00
DizzyMan1337andClaude Opus 5.5 2950132ad8 DLAA: a jitter sequence as long as the upscaling ratio asks for
NVIDIA's DLSS guide asks for 8 x (output / scene)^2 jitter phases: 18 in Quality, 24 in Balanced, 32 in
Performance. The sequence was 16 phases in every mode; it keeps 16 as the least (DLAA).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:31:49 +08:00
DizzyMan1337andClaude Opus 5.5 f071264d61 DLSS modes switch while the game runs
1.4.3 sets its render size once, at start (main+0x7000e67028 calls
main+0x585bd0(renderer, force)). The function-entry hook catches that call's
renderer, and a TOTK_DLSS change writes the new scene size to the patch page and
has the next nvnQueuePresentTexture call the setup again with force set, on the
game's thread between frames, with the guest registers kept. The heap is sized
for the largest scene a mode asks for. The DLSS texture bias is part of the
sampler cache key and follows the mode and the dlaa switch. The game's scaling
pass is told from the in-place FXAA by its missing depth attachment, not by the
sizes, which change a frame ahead of the drawing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:31:49 +08:00
Valiantsin DzerakhandClaude Opus 5.5 fbc938f2a5 Merge task/astclowvram: ASTC to BC3 by default on GPUs with less than 5 GiB (#87)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 12:00:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 1b48c8dc2c Encode decoded ASTC to BC3 by default on GPUs with less than 5 GiB of video memory
A GPU without ASTC gets the textures decoded to RGBA8, four times the memory of BC3, and on a 4 GiB card
that fills video memory: a GTX 1650 went from 10-23 to 3-12 ms of GPU time a frame with astc_bc = 1
(#87). BC3 loses some precision (normal maps), so it stays off where memory is not short. astc_bc unset
now turns it on when the largest device-local heap is under 5 GiB and logs the choice; 0 and 1 still
decide. The menu row becomes Auto / Off / On, and the description says what Auto does in all four
languages.

On an RX 9070 nothing changes. The Radeon iGPU on Windows reports its shared 10.5 GiB as device-local,
so it keeps RGBA8 as well. All probes pass, probe-astc and probe-cfg included.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 12:00:28 +03:00
Valiantsin DzerakhandClaude Opus 5.5 83d2302b6d Replay NVN submissions on their own thread by default
replay_async was off because no timing on our machines showed a gain. Where the game waits for the GPU
it does: a GTX 1650 in the Depths went from 450-686 frames over 50 ms a minute to 10-13, and the 1% low
from 10-12 to 13-24 fps (#88). An RTX 5090 ran slower with it off (#459). Where the replay or the game
threads bound the frame it is neutral (machines A and B, the Steam Deck in #308), and no crash report
ties to it. MacNativeGames has its translation thread on by default for TotK. It adds up to a frame of
latency; replay_async = 0 turns it off.

The fight scene on an RX 9070 with it on: 60.0 fps mean, 1% low 56.3 in the last window, no frame over
50 ms, 0 validation errors.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:48:16 +03:00
Valiantsin DzerakhandClaude Opus 5.5 c1c89590be Merge task/prwave7: community pull requests #504, #539, #532, #584 and #564
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:13:57 +03:00
Valiantsin DzerakhandClaude Opus 5.5 422e3ba50b Turn graphics pipeline libraries back on for AMD's RDNA 1/2 driver
GPL was turned off on that driver branch because its device losses at boot (#5) came with a cold
pipeline cache. Their cause turned out to be GPU writes past 3D BC images, fixed hours later by the
3D BC stand-ins in vk_exec.c. With GPL off every new pipeline is built whole on the draw's path: an
RX 6600 log in #381 has frames of 0.5-1.2 s spent in pipeline builds.

On a Radeon iGPU (RDNA 2, driver 26.10.1, the RX 6600 users' driver) the 0.3.4 release with GPL on
booted from a cold cache and ran the fight scene: 921 fast links, none failed, no device loss, 0
validation errors. Pipeline waits in play dropped from 1381 ms (longest 225 ms) with GPL off to 481 ms
(longest 26 ms). TOTK_GPL=0 still turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:11:09 +03:00
Valiantsin DzerakhandClaude Opus 5.5 4587cb5f61 Merge pull request #564: Keep HDR highlights through the game's FSR 1 upscale (ProSep)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:00:08 +03:00
Valiantsin DzerakhandClaude Opus 5.5 a919c0ff4f Merge pull request #584: Lay the UI out for 3:2 game resolutions (Wintego)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:00:07 +03:00
Valiantsin DzerakhandClaude Opus 5.5 05ada38d69 Merge pull request #539: Runtime text renders as ?: add cheat names and mod folder names to the font atlas glyph ranges (fsfksjfjse)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:00:05 +03:00