The directed-RMode test folds into the result compare through a per-thread threshold, vector slow paths take
their operands through the Cpu instead of stack copies (___chkstk_ms leaves the large lifted functions), the
static FP helpers use preserve_most, and the slow paths rerun only the failing lanes. Bit-identical to the old
headers: 14.85M edge cases under every FPCR mode on v3 and v2, and 13.4G FP ops compared in a check-mode build in
the town and fight2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Its static Cpu ran guest code with a zeroed threshold, which lets +-smallest normal pass the check unexamined.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The result check of every scalar and vector FP op compares |r| against a per-thread threshold in the Cpu (fp_th_s,
fp_th_d): the smallest normal in round-to-nearest, NaN under a directed RMode, so a directed mode sends every result
to the redo path and the separate load and test of c->fpcr per op goes. rt_fpcr_threshold sets it; rt_fpcr_sync
calls it on every host, and the Cpu inits and the fiber switch's fpcr copy call it too.
The vector slow path FN(vredo) takes its operands from c->fp_arg instead of three stack copies per call site, which
takes ___chkstk_ms out of the large lifted functions (275 call sites in main to 5). It reruns only the lanes that
failed the check. A NaN result in round-to-nearest goes from redo straight to fix with the FZ-flushed operands. The
static FP helpers use preserve_most, so their cold call sites do not spill the caller-saved registers.
Results are bit-identical to the old headers (equivalence harness of build/v143-genko/static2, 200M cases).
On the 42 hottest 1.4.3 functions: instructions -8.2%, bytes -8.8%, hot-path instructions -4.3%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR's level-of-detail distance part is left out: it made no visible difference in play, and the emulator mod it came from was dropped there as a placebo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Playtests showed no visible difference from lod_range, and the emulator mod scene dropped the same change as a placebo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_AUDIO_DEVICE names the device as SDL lists it; unset, empty or default keeps the system default and the same open
as before. audio_mixer.c output_open opens the named device, or the default with one log line when it is not
connected. Once a device is chosen, an output worker thread (output_worker) owns the SDL stream: on a cfg change and
once a second it resolves the name again and output_switch opens the new device with the same spec, destroys the old
stream (which waits for its callback), restarts the prefill and resumes. The render thread only wakes or starts the
worker (output_watch), so the game's audio never waits for a device open. A chosen device that disappears falls back
to the system default and comes back within a second of being plugged in again. TOTK_AUDIO_CHANNELS=auto reads the
channels of the device chosen at start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PAD_TOUCHPAD follows the paddles in input_map.h and reads SDL_GAMEPAD_BUTTON_TOUCHPAD in input.c pad_physical, so
input_capture sees the click when a Controls cell waits for a press (#852 had no pad id to report it). It is unbound by
default; pads without a touchpad never report it held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pick patched before (main+0x1ee8424) is reached through its vtable only when the method is overridden; the culling
passes run about 20 inlined copies of it, so the switch changed almost nothing. The lodrange set patches the two places
per version that compute the level depth B at model setup (the setter and its inlined copy); the slope of the coarser
levels follows from B there, and max takes B = 1e30. The menu row sits under Grass range, with Steady detail under load
after it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_BIND_INC had no settings row, so unset meant off. It now has one with default 1, like TOTK_MEMX: 0 or off turns
it off, check keeps the comparison mode. The check mode found 0 differences on 13 scenes (town, fight2, Kakariko,
Great Sky Island, Depths lit and dark, a shrine, rain, a cave, evening, a field, the menus, entering a building).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Diagnostic only. The lifted MSR FPCR (recomp/lifter.py) now also tests the stored RMode bits (cpu.h RT_FPCR_NOTE); the
first nonzero one is logged once by main.c rt_fpcr_rmode with the caller of the writing function. The write itself
behaves as before. Whether the line ever shows decides if the directed-rounding slow paths of runtime/simd.h are dead
in the game. 10 MSR FPCR sites on 1.4.3; nothing on the other paths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
hostfn_entry bumped a per-thread call counter on every host-function call (a TLS load, two branches, a load and a
store) for readers that only the probes and the boot checkpoint line have. The count now sits beside the first-call
trace in a cold hostfn_watch, behind the same single test of rt_trace: RT_TRACE_HOSTCOUNT, switched by hostfn_count,
which --probe-kernel (test_lifted_ticks reads the count) and --probe-ipc turn on. The boot checkpoint line leaves the
host-call count out when nothing counted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FN_ENTER (runtime/cpu.h) opened all 282,702 lifted functions of 1.4.3 with a load of g_fnprof and a branch, for one
reader: runtime/resolution.c res_fn_hit, which waits for main+0x585bd0 (SET_RENDER_SIZE). A `hook` line of the patch
table (recomp/patches.py) now names the functions that keep it; patches-v143.txt hooks main+0x585bd0, and gen.py stops
on a hook that is no function start. Tables without hook lines (1.2.1, 1.1.0) keep FN_ENTER in every function, and
gen.py --fn-enter-all puts it everywhere for a whole-game function-entry profile. The hooked addresses of a chunk are
in its lift cache key (tests/lift_cache_test.py test_hooks_are_in_the_key).
On 1.4.3 the generated C is otherwise byte-identical to dev's (282,701 FN_ENTER lines fewer, nothing else differs).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ten conflicts in runtime/vk_exec_draw.c were dev's memcmp/memcpy -> MX_EQ/MX_NE/MX_CPY swap on lines task/bindinc
had rewritten. Each keeps the task/bindinc code with the swap applied to its hot-path compares and copies (push and set
signature compares, the shader memo's pipe compare, the pipeline memo and recorded-state compares, the vertex
attribute and stream lists). The check-mode compares that call bi_mismatch keep memcmp as the reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The weapon's hit-record pool holds 10 records, and one charged swing above 60 fps fills it: the
insert fails, and the list of hits made this frame stays empty. main+0x2906de0 then reads the empty
list's slot, which holds a stale stack value, and passes it to the hit handler before the game's own
count == 0 check would return; the stale value here pointed at the temp hit map and the read at
main+0x870158 faulted reading 0x100000000a.
Both count == 0 branches now go to main+0x2906df0, the game's check, under the realtime set. A
non-empty list is unchanged, and below 60 fps the pool never fills.
Verified on 1.4.3: a charged spear attack on an enemy at 120 and 144 fps no longer faults, and the
damage at 60 and 120 fps matches the build without this patch.
The setup wrote the path of its Python inside the AppImage mount into
build-cache/rebuild.txt. The mount is gone once the setup exits, so the
game could not start the rebuild for code cheats and ExeFS patches, kept
its old code, and rebuild.skip then stopped every later attempt. The
command now starts $APPIMAGE --rebuild <install folder>, and a rebuild
that does not start leaves no rebuild.skip (#560, #403)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On 1.4.3 the cached lift and a --no-cache lift give byte-identical C, tables and folded.txt; a run with unchanged
inputs reuses all 418 chunks in 2.8 s (92 s cold), and one patch site removed lifts one chunk in 3.7 s with the same
output as a full lift. tests/lift_cache_test.py passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The conflict in recomp/gen.py was the Usage line and the options next to --v-locals and --v-trust; both are kept, and
v_locals and v_trust are in the Emitter options the cache key holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtime/memx.h: MX_EQ and MX_CPY compare and copy with 32-byte loads in the caller; a constant size unrolls, a variable
one loops without a call. Used for the pipeline memo state and the recorded dynamic state (prepare_draw), the shader
answers (shader_for, which also compares the stored hash first), descriptor signatures and push sets (bind_resources),
c0 and support buffers, the uniform update copies, the vertex attribute and stream binds, pipe_find, the dynamic state
delta, nvn_hm_get and the recorder's tail_copy. TOTK_MEMX=1 (default) takes the inline forms, 0 keeps memcmp/memcpy,
check runs memcmp and logs any compare the inline form answers differently.
Machine A, 4 cores, 1080p, bindinc on both sides: Lookout Landing replay 9.64 -> 9.16 ms over 4+4 runs (each ABBA block
-0.40 and -0.55 ms), Kakariko 9.04 -> 8.38 ms over 2+2. Check mode on dev: Lookout Landing pan, 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pub_now stored head and read Q.sleeping with no fence between them, while rec_main sets Q.sleeping and then reads head.
x86 may read Q.sleeping before the head store is visible, so both sides could miss each other and the recorder slept
out its 2 ms timeout with packets waiting. Since rec_submit returns without a drain (TOTK_REC_ASYNC=1), its publish is
the last of a submission, and the present, uploads and readbacks waited for that timeout in rec_queue_wait: a #1174 log
on an RX 9070 XT shows 1.6 to 3.4 ms a wait late in the session against 0.04 ms at its start. pub_now now wakes through
wake(), which has the fence. Cost: one locked instruction per publish, about 2300 a frame in that scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The set table probe cost about 54 ns a draw on Lookout Landing (a cache miss on the 4096-entry table plus two hashes of
every set) and shared 6.7% of the allocated sets. Batched allocation stays. bi_plan's walk over every binding is
replaced by per-binding tests (bi_tests, kept in the pipeline's RsList) that bind_resources evaluates in its own loop,
with the volatile flag kept per binding. A kept binding after a build rereads only the generation group it depends on.
Check mode: 0 mismatches in town, Kakariko, fight2, island and Depths, 60 s each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Check mode on the island save caught one kept texture descriptor whose view differed from the full build: a lookup
of an earlier binding of the same draw made a texture entry (vk_texture_slots_gen moved during the build), and the
full build resolved the later slot under the new generation. bi_plan now records per kept binding whether it depends
on G_tex or G_buf; after a binding is built, the loop reads both again and builds every later binding that depends
on one that moved. Island and Lookout Landing check, 60 s each: 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adapted from Savage Wind Recomp's set_finish and vk_alloc_set (MIT, row in THIRD_PARTY_NOTICES.md). A graphics set
that would be allocated and written is first looked up in a per-context table keyed by two independent 64-bit hashes
of its layout and packed descriptors and stamped with the submission's fence: an equal set of the same submission is
bound instead. New sets come from the submission's last pool in batches of one layout that grow 1, 2, 4, 8, 16 while
the layout repeats, one vkAllocateDescriptorSets per batch instead of per set. check stores each set's contents,
compares every hit with them and allocates as before. Lookout Landing: about 2,000 allocated graphics sets a frame,
6.7% shared; check 0 mismatches; on ran 60 s without errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With TOTK_BIND_INC the graphics build writes into VkExecDraw.BI, which keeps the packed descriptors of the last build
and, per descriptor, what it counted for the traffic census and whether it copied guest bytes. bi_plan names the
bindings to build again: support always; c0 when a storage slot of the stage or the base instance changed; the
compiler constants when the program, its serial or G_buf changed; uniform and storage slots when marked or when G_buf
(pools and mirrors, snapshots, overlays, the submission) moved; textures and images when a handle was marked or G_tex
(slot registrations, samplers, the storage epoch, the feedback layout, DLSS's swap) moved; storage addresses held in
a uniform block, and any descriptor whose build copied guest bytes, every time. A pipeline with a written storage
binding is built in full. Kept descriptors count their census again; a set none of whose descriptors changed and that
is still pushed or bound records nothing, without the psig or sig compare. check builds everything as before and
compares each kept descriptor and its census with the build. Lookout Landing check, 60 s: about 17,000 kept bindings
compared a frame, 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bind_vertex_buffers resolves and compares the 17 streams the vertex input reads on every draw. When the last
prepared draw bound the same set of streams in this command buffer, no op changed one of their ranges, vk_mem_gen
stayed, and with static vertex input the strides did (pipe_gen), every stream would resolve to what is bound: the
loop is skipped. check runs the loop and counts a stream it would bind again. Lookout Landing check, 60 s: 62% of
draws skip it, 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feedback_scan's memo is keyed by tex_serial, which every texture or image bind of either stage moves. When the memo
holds the last prepared draw's scan (BiLast.fb_ok) of the same fragment shader in the same pass, no slot was
registered since, and no marked fragment texture slot is one the shader reads (BiMask.ftex, buffer textures
included), the answer stands. check scans and compares. Lookout Landing check, 60 s: kept on 68% of draws (the memo
alone 60%), 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shader memo already keeps them while the program, the bound state and the first 32 handles of both stages are
equal. With the marks it also keeps them when other slots were rebound: no program or serial change, the same
pipe_gen and slot generation, and no marked texture or image slot inside the program's slot mask (slot_mask_of,
~0u while unknown), which are all answers_for reads. BiLast.sm_ok says the memo holds the last prepared draw's
shaders, so a mark cleared by a later draw never hides a change. check looks the shaders up and compares. Lookout
Landing check, 60 s: shaders kept on 65% of draws (the memo alone 55%), 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From task/fastrep 18eab597 (TOTK_PIPE_GEN), now under TOTK_BIND_INC: the pipeline memo keeps the pipe_gen its state
was built under; a draw with that generation and the same shaders, primitive, restart, feedback flags and depth mode
takes the memo's state and pipeline and skips the three 360-byte compares (memo, cache entry, recorded state). The
shader memo skips its compare of pipe the same way. check builds and compares as before and counts a state the
generation called unchanged that differs (bi_mismatch logs the first of each kind with its marks and generations).
The census runs only in check mode. Lookout Landing check, 60 s: 67% of draws keep the state, 0 mismatches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_exec_bind compares before it writes: VkExec.dirt gets a bit per program, uniform, storage, texture, image and
vertex buffer slot that changed, pipe_gen moves with every change of the pipeline state (also depth clamp, raster
discard and the target formats), fbl_serial with the feedback-layout images, OV.gen with the uniform overlays.
vk_exec_draw_new_cb, copy_state and state_reset mark everything. With TOTK_BIND_INC=on or check, bi_census sorts each
prepared draw by what changed since the draw before (nothing, uniform slots only, other slots, another pipeline) and
counts the descriptors to rebuild, the generation moves and the shader, pipeline, vertex buffer and feedback keeps;
a bind_inc line every 300 frames. No draw is prepared differently yet.
Lookout Landing, 4500 draws a frame: nothing changed 8.7%, uniforms only 55.5%, other slots 22.9%, another pipeline
12.8%; 3.4 of 11.2 descriptors a draw to rebuild; uniform overlays move on 2.3% of draws, snapshots 0.1%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
K = 8 cut guest time 3.9-6.2% in the town on a 7900X against K = 0. func.py tests the same default; --v-locals 0
gives the previous output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
recomp/vlocals.py rewrites each emitted function: c->v forms become the RT_VLOCALS accessors of runtime/simd.h, the
K registers the function names most get bits in VMASK, they are loaded at entry, stored where the dirty mask may hold
them before calls and exits, and reloaded after calls; --v-trust skips the reload of V8-V15. A function with a form the
rewrite does not know keeps every register in the Cpu. K = 0, the default, emits the same C as before. The manifest
counts the rewritten functions and syncs. tests/diff/func.py takes --v-locals, --v-trust and --work (one work
directory per concurrent run).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Work in progress: the generator side (gen.py --v-locals) is not written yet, so no chunk defines RT_VLOCALS and the
default build is unchanged. build_game.py gains --gen-o2 for A/B builds at the PGO optimisation level without a profile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>