Auto refused both Venus and the bridge when the phone's driver reports Vulkan
below 1.2, so on the G77, G78 and G610 (r32p1/r38, Vulkan 1.1) a rolled-back or
missing pair left the runtime's Turnip: "failed to find physical device"
(Retroid Pocket 4 Pro after the JM pair's trial, Xiaomi 13T). Only Venus needs
1.2; the bridge raises the driver for gamescope and runs on these phones. A
Venus switch that cannot start on such a driver no longer counts as a route.
Conflicts resolved:
- build.yml: main's proot pack pin check and the Venus component fetch both kept.
- compositor.c: main's unpaced release goes through send_buffer_release (DMA-BUF quarantine).
- PulseAudioComponent: the AAudio retry loop stays; both sinks get main's control_dir.
- SessionService: main's add-on pack and proot checks, then the PowerVR driver setup and staging.
- droiddeck-session: main's stretch and refresh arguments with the selectable backend.
- droiddeck-gpu: main's desktop window mode on the wayland backend; PowerVR's sdl backend stays full screen.
- gamescope/release.env: the non-Adreno build stays pinned until the next one is published.
- FrontEndActivity/FrontEndScreen/SessionActivity/SessionFiles/SessionPrefs/LinuxRuntime/strings: both sides kept.
- test_gamescope_backend: the desktop backend test turns window mode off.
Game and global component choices were written to desired.tsv only when a
selection changed, so a Proton build installed later (DroidDeck-Proton
11-11.8) had no rows and kept its bundled FEX. Battle.net's d2rfix FEX never
reached it and StarCraft died in ClientSdk.dll's DllMain. The choices are now
republished at session start and on Battle.net's FEX request whenever the
installed tools no longer match what was published.
Remove the Performance mode switch. The session always runs the way
Performance mode did: replaced buffers go back to the game at once
(except while mirroring to glasses), gamescope's WSI layer and winex11
reuse their per-present window checks, and games get eight swapchain
images while uncapped. Steam's Frame Limit in the Quick Access menu is
the only limit.
gamescope 3.16.29-p15 (p14 plus two patches):
- 0119: with the Frame Limit on, gamescope forces FIFO while the WSI
layer hands the driver MAILBOX, so a game with eight images could
queue up to seven frames ahead of the screen. While the limiter forces
FIFO the layer uses its default of 3 images; DXVK and VKD3D-Proton
recreate their swapchain when the limiter changes, other apps are asked
to with VK_SUBOPTIMAL_KHR.
- 0120: -r fixed gamescope's pacing and limiter rate for the whole
session. With GAMESCOPE_NESTED_REFRESH_FOLLOWS_HOST=1 a rate the host
has reported for 300 ms replaces it (a switch from 144 to 120 Hz passes
through 72 Hz for a few frames), and Steam gets the display information
again. The session sets it whenever it passes -r.
Steam keeps its Frame Limit as the client setting
gamescope_app_target_framerate and offers the values gamescope's display
state lists. After a refresh change, a limit the new rate does not offer
(72 at 120 Hz) left the slider on its first value while the game kept the
old limit. The Steam helper watches the offered values and, once they
settle, keeps the limit when it is still offered and moves it to the
highest value otherwise, through Steam's own setting so the slider shows
it. Steam's webpack does not expose its module cache, so the gamescope
service is found by the calls its module makes, and the helper retries
the install every 10 s until Steam is ready.
The session window asks for the fastest mode the peak refresh setting
allows and chose again only when the display changed, so after it had
asked for 60 Hz, raising Android's refresh setting left the display,
gamescope and the limit at 60. It now also chooses again when
peak_refresh_rate or min_refresh_rate changes.
Steam's arm64 streaming_client only decodes through a V4L2 stateful
decoder and libdrm dumb buffers, neither of which exist on Android, so
streams from a PC never showed a picture. The preload now offers it a
/dev/video-dec0 and a libdrm stand-in backed by dma-heap buffers, and
each frame is decoded by the app's MediaCodec (Qualcomm low-latency
mode) over the encoder socket, falling back to the FFmpeg in Steam's
runtime.
* Add itch.io collections to the Library
A Collections button on the Library's itch tab filters the library to one collection of the signed-in account. Its games that are not installed show in the Not installed section.
* Keep itch collections complete across failures, sign-out and empty libraries
A failed later page no longer publishes a partial collection, selecting a collection refreshes it, pagination runs until an empty page, signing out clears collection state, and the itch chip shows for a signed-in account with no owned games.
* Tie itch collection requests to the account that started them
Requests capture the account generation before reading the key and dedupe per generation, sign-out clears collections after the token is removed, and the collections load follows the itch sign-in state.
* Keep paging itch collections past a page of already seen games
* Run the itch collections tests under Robolectric like the other itch tests
* Let the Installed filter apply inside a collection and keep the grid for an empty itch account
* fix(itch): stop paging a collection when a page adds no new games
* Keep the collections icon on the itch collections tab when it opens
---------
Co-authored-by: maxjivi05 <maxjividen@gmail.com>
The game surface only took touches in gestures mode, so in touchpad and
direct mode a finger on the game left the window with no touch target and
Android sent every later finger to the touchpad, even over a stick or
button. The surface now owns those fingers in every mode, and the
on-screen and Steam touch controls hand fingers that miss a control back
to the touchpad instead of dropping them.
* feat(input): support instant Back chords and tap timing
* fix(input): send QAM before shortcut inputs
* fix(input): stop delayed stick input on Back release
Steam's native QAM sliders now control Android brightness and media
volume, with device changes reflected back in Steam. Holding Android
Back for 700 ms sends a real held QAM button for Steam shortcuts. Single
and double taps keep the existing menu/QAM order and swap setting; the
double-tap window remains 500 ms.
- Discover native brightness through a guest backlight descriptor and
use Android's Modify system settings permission. Retain the latest
pending request until permission is granted or the session stops, with a
notification action for hidden sessions.
- Give DirectAudio and fallback AAudio sinks Android media volume/mute
callbacks, keeping software gain at unity. Recover when initial volume
state is absent or invalid, brightness acknowledgements differ or never
arrive, or the Display bridge is not ready yet.
- Forward other buttons while QAM is held in Steam Deck and Steam
Controller modes. Consume release after a hold and clear pending input
on overlays, focus loss, pause, disconnect, and teardown. The session
menu retains its compact Back choice without an explanatory paragraph.
Validation:
- Local ARM64 release build passed. The latest timing change passed 20
targeted input tests, including release at 600 ms remaining a tap. The
preceding full feature check passed 61 Android input/device-control
tests, with permission cases on API 28 and 33.
- 66 Linux Python/Node/C tests passed for device controls, audio
recovery, Steam compatibility, and file dialogs. Both audio sink modules
rebuilt with Android NDK 27.2.
- Release-signed integration build 14d12cf0 is installed on the unrooted
AYN Thor, carrying the Android/input changes through 749ade4a plus the
existing portrait changes. Device checks confirmed the configured
QAM/menu tap order, Back dismissal, removal of the inline menu
description, and held QAM overlapping X with clean release. Hands-on
testing confirmed this installed build works.
- Earlier Thor testing covered brightness permission and pending
requests, brightness synchronization in both directions, native volume
changes, hardware volume key readback, and both sink backends. Failure
recovery is covered by the automated tests above.
The subsequent queued-notification fix in 4d7ceb23 is covered by the
Linux regression suite and has not replaced the Thor install.
Bluetooth/wired output switching and other device models remain
untested. CI and CodeRabbit monitoring continue against the pushed head.
The pin moved there from droiddeck-steam-x64, so the client settings sheet
and its test read it from the new script. The x86-64 client notes now name
the updater and Components' FEX watcher.
A frame limit only paced what reached the screen: a game without vsync
kept drawing hundreds of frames a second that were thrown away (AIO at
a 60 fps limit drew 155 to 2,446 fps), so the limit saved no power.
With Performance mode on and a frame limit set, the session now sets
gamescope's per-game limit over gamescope_control (gamescopectl
debug_set_fps_limit). gamescope's limiter then has its WSI layer hold
Vulkan games, DXVK and VKD3D included, to the limit. gamescope's own
--framerate-limit option is reset on its first frame in 3.16.29, and
Steam resets the per-game limit while it starts, so the session watches
gamescope's limiter state file and sets the limit again whenever it is
off (a once-a-second check with shell builtins, no process started).
With Performance mode off, a limit paces the screen only, as before.
The session also gives gamescope a fixed limiter state file path, so
gamescope stops leaving a new one behind on every start, and removes
the old ones.
Device-proven on the AYANEO Pocket FIT (Turnip, AIO D3D11, 45 s runs on
battery, three runs each): at a 60 fps limit the game held exactly
60.0 fps and the device drew 7.08 W instead of 9.45 W, with 1.3 instead
of 2.6 busy cores and 5 instead of 11 % GPU load. No limit: unchanged.
A cancelled install now waits for its Agent job to end before the
uninstall runs, and removes the folder only once the Agent no longer
lists the game or the folder is empty. Uninstall gives up when Battle.net
or a game keeps the prefix busy for a minute, so the page falls back to
opening Battle.net. An uninstall only counts when the Agent reports the
game as not installed.
Battle.net games now install like Epic, Xbox and itch games: Install,
pick a location, and the download runs in the Downloads tab while the
Stores page stays open. droiddeck-battlenet starts Blizzard's own Agent
on its own under a headless gamescope and drives its local API, so no
window opens and nothing waits on the Battle.net client.
- Progress, speed and time left come from the Agent, with pause, resume
(the Agent keeps what it downloaded) and cancel, which uninstalls the
partial game and removes its folder.
- A job only finishes once the Agent has really run it and the game is
playable; the first status after a request can still describe the
previous operation.
- Installed games check Blizzard's version service and show Update when
the build on disk is behind; the update repairs missing files too.
- Battle.net games can be uninstalled from their page through the Agent.
- Games land in the chosen location: internal storage, other storage or
a Games folder.
- The hero keeps its action row clear of the playtime column.
The flow solver starts at flowFinest_, but its images, uniform buffers and descriptor sets were allocated for every pyramid level. Keep the seven-level indices and allocate flow resources only where the solver reads and writes them.
The default preset avoids three unused RGBA16F images, saving 38,707,200 bytes of pixel payload at 2560x1440 without changing the shaders or recorded GPU work. Add native allocation/dispatch regressions and document the resource budgets.
The412Banner