A device with /dev/mali0 and no KGSL starts with the bridge on, so it draws
without a trip to Setup. An Adreno keeps Turnip and its automatic driver
route whatever the setting says, other GPUs keep the switch off until it is
turned on, and a choice made in Setup always wins. The GPU checks are read
once per process.
Setup has a "DXVK" row under the bridge's safe mode: automatic (the default, as before) or
Proton's own (SessionPrefs.bridgeProtonDxvk). With Proton's own, nothing is chosen and an earlier
automatic choice goes back to the Proton's copy.
Automatic choices also go back when the session is not a bridge session (the bridge turned off),
even when nothing is known of the Vulkan; a queued automatic swap is dropped with them, the
player's own queued swaps stay. Turning the bridge off, or choosing Proton's own, does it right
away in the background instead of at the next session. A failed detection in a bridge session
still keeps the last choice.
When nothing could be read (no apps-vulkan file and VulkanInfo failing), every automatic choice was
undone: a 1.1 phone went back to a DXVK that cannot start, and the next session flipped it again.
Now an automatic choice is undone only when the Vulkan is known and wants none.
Each Proton's swap or undo is on its own: a failure (a missing saved copy, an I/O error) is said in
the result and the remaining Protons still get theirs. When the Proton is the same but its saved copy
is gone, the choice stays and is said, instead of being forgotten with DXVK 1.10.3 still installed.
apps-vulkan: the version counts only with promotion=on; otherwise, and in files from servers before
the field (which wrote a promoted version even where it was not trusted), driver_api does. A file
whose driver_api is not the driver's own version (a driver update, a server rolled back) is left out.
Proton's DXVK 3 refuses a device below Vulkan 1.3, without shaderInt64 or
with less than 256 bytes of push constants, so on a Mali with a 1.1 driver
(OnePlus Ace 2V, Mali-G710, r32p1) every D3D9-11 game exits. On a bridge
session the forced-package step now picks the newest DXVK that starts on
what games see: 1.10.3 below Vulkan 1.3, 2.6.2 on 1.3 without shaderInt64
or 256 bytes of push constants, Proton's own otherwise.
What games see comes from <bridge cache dir>/apps-vulkan (a bridge with
Vulkan promotion writes it after its self-test) or else from the phone's
driver (vkinfo now reports shader_int64 and max_push_constants). These
choices are marked automatic: a later session with another answer swaps or
restores them, and the player's own choice in Components is never touched.
FrontEndActivity read vkBridge and vkBridgeSafe only when the Performance page
opened, so after an app restart (every APK update) Setup showed
"Mali bridge: off" while sessions used the bridge. refresh() now reads them.
VkBridgeComponent logs how long the server took to listen.
A second row under the GPU check, shown only when the bridge is on: "Safe mode" keeps the
bridge's proven workarounds wherever its startup probe has not verified this GPU and driver;
off is performance mode, native paths wherever the probe passed. It reaches the server as
<cache dir>/mode ("safe" or "performance", written atomically before the server starts or is
reused, so the in-app server's JNI start stays as it is) and the guest as VKBRIDGE_MODE, which
/root/.vkbridge-env can still override. A server without modes ignores the file.
Android empties an app's cacheDir when storage runs low; it took the bridge's pipeline
caches, the probe profile, stuck-pipelines and the env file from under a running server.
The directory is now files/vkbridge-pipelines (--cache-dir and the in-app start alike), and
an existing cache/vkbridge-pipelines is moved there once. Nothing trims filesDir, so the
server's own limits bound it (64 MB per pipeline cache file, a total limit in newer servers).
On a GPU without KGSL, Setup offers an experimental Mali bridge switch
(off by default; ignored on Adreno). With it on, the session starts the
bridge server, points the Vulkan loader at the bridge ICD, names Mali's
device as the stand-in render node, runs the bridge self-test into the
session log, and caps vkd3d-proton's feature level at 12_0. Flatpak
sandboxes get the bridge ICD and socket. The DRM preload falls back to
flock in a bridge session when kcmp is refused, and a clock/thermal log
is kept beside the bridge logs.
A non-QTI gralloc handle (Arm/MediaTek gralloc on Mali) has no layout
the compositor can read, so the pool import guessed a linear dma-buf and
failed. On drivers other than Qualcomm's the compositor device enables
VK_ANDROID_external_memory_android_hardware_buffer and
VK_EXT_queue_family_foreign and imports such buffers as AHardwareBuffers;
the linear dma-buf stays as the last resort. Adreno/Turnip keeps the
same device and the dma-buf path.
The server is built with the NDK into libvkbridge_server.so (a program
the app execs from its native library directory); the Linux ICD, its
manifest and the self-test go into the runtime assets with the other
glibc preloads, locally and in CI.
Steam's native QAM sliders now control Android brightness and media
volume, with device changes reflected back in Steam. Holding Android
Back for 700 ms sends a real held QAM button for Steam shortcuts. Single
and double taps keep the existing menu/QAM order and swap setting; the
double-tap window remains 500 ms.
- Discover native brightness through a guest backlight descriptor and
use Android's Modify system settings permission. Retain the latest
pending request until permission is granted or the session stops, with a
notification action for hidden sessions.
- Give DirectAudio and fallback AAudio sinks Android media volume/mute
callbacks, keeping software gain at unity. Recover when initial volume
state is absent or invalid, brightness acknowledgements differ or never
arrive, or the Display bridge is not ready yet.
- Forward other buttons while QAM is held in Steam Deck and Steam
Controller modes. Consume release after a hold and clear pending input
on overlays, focus loss, pause, disconnect, and teardown. The session
menu retains its compact Back choice without an explanatory paragraph.
Validation:
- Local ARM64 release build passed. The latest timing change passed 20
targeted input tests, including release at 600 ms remaining a tap. The
preceding full feature check passed 61 Android input/device-control
tests, with permission cases on API 28 and 33.
- 66 Linux Python/Node/C tests passed for device controls, audio
recovery, Steam compatibility, and file dialogs. Both audio sink modules
rebuilt with Android NDK 27.2.
- Release-signed integration build 14d12cf0 is installed on the unrooted
AYN Thor, carrying the Android/input changes through 749ade4a plus the
existing portrait changes. Device checks confirmed the configured
QAM/menu tap order, Back dismissal, removal of the inline menu
description, and held QAM overlapping X with clean release. Hands-on
testing confirmed this installed build works.
- Earlier Thor testing covered brightness permission and pending
requests, brightness synchronization in both directions, native volume
changes, hardware volume key readback, and both sink backends. Failure
recovery is covered by the automated tests above.
The subsequent queued-notification fix in 4d7ceb23 is covered by the
Linux regression suite and has not replaced the Thor install.
Bluetooth/wired output switching and other device models remain
untested. CI and CodeRabbit monitoring continue against the pushed head.
The pin moved there from droiddeck-steam-x64, so the client settings sheet
and its test read it from the new script. The x86-64 client notes now name
the updater and Components' FEX watcher.
A frame limit only paced what reached the screen: a game without vsync
kept drawing hundreds of frames a second that were thrown away (AIO at
a 60 fps limit drew 155 to 2,446 fps), so the limit saved no power.
With Performance mode on and a frame limit set, the session now sets
gamescope's per-game limit over gamescope_control (gamescopectl
debug_set_fps_limit). gamescope's limiter then has its WSI layer hold
Vulkan games, DXVK and VKD3D included, to the limit. gamescope's own
--framerate-limit option is reset on its first frame in 3.16.29, and
Steam resets the per-game limit while it starts, so the session watches
gamescope's limiter state file and sets the limit again whenever it is
off (a once-a-second check with shell builtins, no process started).
With Performance mode off, a limit paces the screen only, as before.
The session also gives gamescope a fixed limiter state file path, so
gamescope stops leaving a new one behind on every start, and removes
the old ones.
Device-proven on the AYANEO Pocket FIT (Turnip, AIO D3D11, 45 s runs on
battery, three runs each): at a 60 fps limit the game held exactly
60.0 fps and the device drew 7.08 W instead of 9.45 W, with 1.3 instead
of 2.6 busy cores and 5 instead of 11 % GPU load. No limit: unchanged.
A cancelled install now waits for its Agent job to end before the
uninstall runs, and removes the folder only once the Agent no longer
lists the game or the folder is empty. Uninstall gives up when Battle.net
or a game keeps the prefix busy for a minute, so the page falls back to
opening Battle.net. An uninstall only counts when the Agent reports the
game as not installed.
Battle.net games now install like Epic, Xbox and itch games: Install,
pick a location, and the download runs in the Downloads tab while the
Stores page stays open. droiddeck-battlenet starts Blizzard's own Agent
on its own under a headless gamescope and drives its local API, so no
window opens and nothing waits on the Battle.net client.
- Progress, speed and time left come from the Agent, with pause, resume
(the Agent keeps what it downloaded) and cancel, which uninstalls the
partial game and removes its folder.
- A job only finishes once the Agent has really run it and the game is
playable; the first status after a request can still describe the
previous operation.
- Installed games check Blizzard's version service and show Update when
the build on disk is behind; the update repairs missing files too.
- Battle.net games can be uninstalled from their page through the Agent.
- Games land in the chosen location: internal storage, other storage or
a Games folder.
- The hero keeps its action row clear of the playtime column.
The flow solver starts at flowFinest_, but its images, uniform buffers and descriptor sets were allocated for every pyramid level. Keep the seven-level indices and allocate flow resources only where the solver reads and writes them.
The default preset avoids three unused RGBA16F images, saving 38,707,200 bytes of pixel payload at 2560x1440 without changing the shaders or recorded GPU work. Add native allocation/dispatch regressions and document the resource budgets.