Merged on top of #566. The camera motion is #594's: its blocks in camb also feed the per-object pass, and
dlaa_mv.comp stays as on main, fed the identity and the reprojection made on the CPU in double. #566's
vk_usnap_host goes, vk_usnap_bytes serves the same. #566's scaling-draw swap, camera rune guard and output-size
scaling pass stay in vk_dlaa.c. Translator patch 0012 becomes 0015 after dev's 0012-0014.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Solid scene draws whose position reads an object's own uniform blocks (bones c5, place c7, c6) are drawn a second time
with a vertex shader variant (translator patch 0012) that computes last frame's position from last frame's blocks; the
game writes those into two copies that take turns, and the uniform snapshot keeps both (vk_mvprev.c). The draws are
listed during the replay and recorded through the recorder thread with repeated state skipped. Blocks whose last-frame
copies measured wrong (c9 and c11 of walls and cliffs) keep this frame's; positions without an object block (terrain,
grass) keep the camera's motion, which measured as good.
The camera motion is reprojected in double precision on the CPU: the float inverse made noise on far surfaces and a
still camera that DLSS followed into a wobble. DLSS gets Ultra Performance (a third of the output, also in the F1 menu)
and NVIDIA's recommended preset per mode (K, M for Performance, L for Ultra Performance; TOTK_DLSS_PRESET overrides).
Test switches: TOTK_MV_CHECK measures the motion vectors and DLSS's output against the picture, TOTK_DLAA_TIMES times
DLSS and the motion passes on the GPU. A reactive mask pass for transparents is included but off (TOTK_DLSS_REACTIVE):
its mask covers sky and fog too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- BFE / BFI (patch 0012): a field past bit 31 is cut there, one that starts past it extracts 0 (signed: bit 31
repeated) and inserts nothing, as PTX bfe / bfi. Clamped only where the field is not a constant inside the word.
1.4.3's Depths terrain vertex shaders (42 variants, 134 extracts) compute the position as ((2y + x) * 8) & 0xff,
up to 248; AMD's bitfield instructions take it modulo 32. UltraTears saw the Depths walls and ground missing on
RADV (Steam Deck, RX 570).
- SHF by 0 (patch 0013) gives the unshifted word instead of shifting the other one by 32. Every register SHF of
1.4.3 pairs its word with 0, so 1.4.3 results do not change.
- Function-local variables start at 0 (patch 0014): a register read on a path that never wrote it is no longer an
undefined value Mesa may fold.
All 12,454 1.4.3 shaders translate and pass spirv-val. RX 9070, Depths save: the same picture before and after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The marker fix gave the root's scale of BalloonMessage_00 to its part pane Pa_BalloonMessage_00. The game pools that
part, cloning it into Pa_BalloonMessage_%02d at run time, and the clones don't keep the template pane's scale, so on
32:9 NPC speech balloons drew twice as wide as they should.
The scale now goes inside the part layout instead, to the top panes of PaBalloonMessage_00 (C_CaptureBase_00 and
N_InOut_00, their offset scaled with them), which every clone is built from. Its animations only key alpha, visibility
and N_Loop_00's y. The part pane keeps scale 1. Same on the y axis for 16:10.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The check step tells a compressed file by its content (an NSP or XCI holding NCZ files), whatever its name, and
unpacks it into the temp folder with tools/ncz.py before the extraction reads it. Every NCA comes back byte for byte
and is checked against the hash in its name. The file dialog has one filter for all game files, and the form says
that compressed files are unpacked automatically, in every setup language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Amiibo tab's folder field took no typing: the menu never passes typed characters to Dear ImGui, so "Open" only
re-read "./amiibo". A missing folder said so at the bottom of the right pane, below its scroll.
"Open" now shows the shell's folder dialog on Windows (IFileOpenDialog on a thread of its own, owned by the game
window) and SDL_ShowOpenFolderDialog on the SDL window thread elsewhere; the tab shows the folder as text and names a
missing one inside the empty list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wide and tall UI overlays scale each layout's root pane on the stretched axis. The lock-on arrow, the name label
of the item or character in front of Link, enemy life bars and notices, and speech balloons are moved in code to the
target's projected position on a pane under that root, so the position was scaled as well: on 32:9 these markers sat
at half their distance from the middle of the screen, short of what they point at.
Those four layouts keep their root at scale 1 and give the scale to the panes under it that the code does not move and
no animation scales, so the markers land on their target and keep their 16:9 proportions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
-march=x86-64-v2 does not reach inline assembly, target attributes or intrinsics, which is how kern_ap_stub's YMM
saves got into libtotkrt-v2.a (issue #454). tools/check_isa.py disassembles objects and lists every function with
VEX/EVEX, BMI1/2, LZCNT, MOVBE, ADX, SHA, AES, PCLMUL or RDRAND/RDSEED code or YMM/ZMM/mask registers, except
functions in its DISPATCHED list (sha256.c blocks_ni, behind __builtin_cpu_supports). build_game.py --cpu v2 runs it
over the runtime objects after compiling and before linking or archiving, so make_release.py's v2 library build fails
too. Objects unchanged since the last clean scan are skipped; a full scan of the runtime takes about a second. The
release ships the script, and the installer's runtime fingerprint includes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LASRecomp, MacNativeGames, d2r-mobile, nxnative and SavageWindRecomp moved; SwitchRecomp and deko3d did not.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 0.2.8 install's romfs/index.json had two flipped bytes, and the update stopped with an unexpected JSONDecodeError
instead of extracting again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Brazilian Portuguese and Simplified Chinese setup texts now name the 1.1.0 update beside 1.2.1 and 1.4.3, as the
English and Russian ones do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The update this port builds for has version value 0x20000, which is Tears of the Kingdom 1.1.0, not 1.1.1: the upstream expected-v1.1.2.json carries 0x40000 and the other expected files step 0x10000 per release, so 0x20000 is 1.1.0 and 0x30000 is 1.1.1. Pull request #220 introduced the wrong label in expected-v1.1.1.json.
Expected hashes, patch sites, boot constants and the RomFS layout are unchanged; only names change:
- tools/data/expected-v1.1.1.json -> expected-v1.1.0.json, display_version 1.1.0
- recomp/patches-v111.txt -> patches-v110.txt
- installer/layout.py SUPPORTED and tools/build_game.py DISPLAY_VERSIONS
- make_romfs_patches.py --version choices and its COMMON table key (the RomFS archive name stays Common.Product.110)
- runtime RT_V111 -> RT_V110, the inits_111 and expect_111 tables, the probe's census folder v110
- README, docs and the installer texts
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
--make-runtime-lib compiles runtime/ alone, so it must not insist on a chunk manifest that only a lift writes: the
library is rebuilt by itself when the runtime sources change.
A mod that patched the game code (.ips, .pchtxt) stayed off as a whole.
tools/exefs_patches.py now reads IPS, IPS32 and IPSwitch files from each
mod's exefs folder and from atmosphere/exefs_patches/<name>/. It keeps the
ones whose build id is main's and turns their writes into main's code into
one patch set per file. The writes go through the same rules as the code
cheats (tools/cheats.py convert). A file that writes main's data, or that the
rules cannot express, is unsupported as a whole. The setup's lift runs it
after cheats.py and writes build-cache/exefs.status.
runtime/mods.c checks each patch file against that status:
- a built file's set is switched on with its mod;
- a file the build lacks keeps the mod off and starts the rebuild at the next
start, like a code cheat does;
- an unsupported file keeps the mod off, and the Mods tab shows the reason;
- a file for another version is counted and left out.
A mod patch on a site of one of the port's own sets turns that set off while
the mod is on, and the Mods tab names it. The Mods tab also gets the "Rebuild
the game now" row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A cheat file is now part of a mod: mods/<mod>/cheats/<build id>.txt, or the
Atmosphere places inside the mod folder, the file name in any case. The port
ships no cheat files any more (the MyNXCheats files and their notice row are
gone).
- tools/cheats.py --mods builds the code cheats of every mod folder; a
cheat's key hashes "<mod folder>/<name>", so two mods' cheats of one name
keep their own switches.
- The setup reads the cheats from <install>/mods and writes the status to
build-cache/cheats.status.
- runtime/cheats.c reads the files of the enabled mods the port can use, in
the Mods tab order, and the status from build-cache.
- A mod with only cheats is usable. The Cheats tab groups the cheats by mod,
and the Mods tab says how many cheats a mod brought.
- The cheat texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
make_release.py copied build/xlate as it found it, so a translator change reached no Windows release until someone rebuilt it by hand, and nothing failed when they did not: 0.2.1 and 0.2.8 shipped a translator from before the gather bias while the runtime logged that the bias was on. The Linux release builds its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Merged onto the mods folder (task/mods1); the Cheats tab sits after Mods. The cheats' menu text and the cheat file's
place are reworked for the mods folder in the commits that follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtime/cfg.c: the known names take both sides, the per-stick dead zones beside the shadow and
DLSS switches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The menu side is dev's: it has Simplified Chinese since #243, glyphs included. Simplified Chinese
joins the setup window as a fourth language beside Brazilian Portuguese, in the language switch,
the Windows and locale pick and the launcher; zh-Hans.json gets the nineteen texts added since
(fonts step, CPU level, base game checks, Linux checks) and the {game_exe} placeholder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Keeps pull request #321's anisotropic filtering, which #89 added a second time, and #267's shadow_res beside #89's
shadow_scale. The HDR parameters move from byte 1408 of the support buffer to 1440: translator patches 0010 and 0011
read pcss at 1408 and shadow_spread at 1424.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The setup keeps a player's own file. A bundled file the tools refuse costs its cheats, not the install.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
-march=x86-64-v3 kept the port and the installer to CPUs with AVX2 and FMA. --cpu v2 compiles the generated code and the runtime for SSE4.2 instead. Without FMA3 the FP lowering calls fma/fmaf, so runtime/fma.c provides correctly rounded ones (musl, MIT) that honour MXCSR's rounding mode, FTZ and DAZ; the UCRT's software fallback rounds incorrectly by up to half an ulp. simd.h's fast paths keep their assumptions.
The installer's host check asks for x86-64-v2 and selects libtotkrt.a or libtotkrt-v2.a; both release scripts build and ship the pair. The differential tests compile fma.c as well, so a --cflags=-march=x86-64-v2 run tests it.
Tested on an i7-3770K (no AVX2, FMA or BMI) with an RTX 3060 Ti, game 1.4.3: the installer ran end to end, --selftest passed and play holds 40-60 fps at 1080p. fma and fmaf matched 152,288 exact vectors over two seeds, including ties, subnormals and every rounding mode, FTZ and DAZ combination. The v3 build is unchanged: fma.c is an empty translation unit there.
With hdr = 1 the game's tonemap shader is replaced by one that keeps highlights up to the display's peak, the present
reads the float picture the game copies into its 8-bit window texture, and a compute pass encodes it as PQ in Rec. 2020
for an HDR10 swapchain. Peak, paper white and HUD brightness are live settings in the menu and totk.ini. The approach
follows the RenoDX TotK mod by souperman9 and Musa; no code was copied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shader list covers several versions, so most of its rows are absent from any one game and the old test fell back to
reading the whole RomFS on every install: 23,825 of 41,414 rows on 1.2.1, 23,370 on 1.4.3. The fallback now runs only
when the narrowed walk finds next to nothing. On 1.2.1 and 1.4.3 the narrowed walk finds the same shaders as the full
one (27,576 and 28,667, none only in the full walk) in 2 s instead of 51 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.1.1 (update 131072) gets its boot constants, expected hashes, the 60 fps
RomFS overlay, its own code patch table, the scene module slot, loader probe
values and shader census lookup, and the setup accepts it. 1.2.1 and 1.4.3
keep every value: the runtime branches on RT_V111, and an install without a
recorded version still falls back to 1.2.1.
1.1.1 has no aspect patch set; outputs other than 16:9 are scaled to the
window on that version.
Fixes#173
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ExeFS digests, the merged RomFS size and hash and the six shared fonts, so extract.py can tell this update from any
other. No rewritten_sha256: that field names MacNativeGames' NSO rewriter output, this dump never went through it, and
nothing reads it.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
Its Common archive carries the same version number as 1.2.1, so make_romfs_patches.py takes v111 and reads
Common.Product.110, moving the quick-menu background captures to animation frame 0 where the world still draws.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
The build knows the player's update as v111: DISPLAY_VERSIONS maps it for the version line of the settings menu, and
boot.c carries its two checkpoint return addresses (0xeb8c14 for SetFocusHandlingMode, 0xebcdec for the first
nvnBootstrapLoader call) beside the 1.2.1 and 1.4.3 ones, with init_array counts of 10668, 45 and 116 for main, subsdk0
and sdk. The build guide lists v111 among the versions every step takes.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
The fallback read the whole RomFS whenever the shader list named shaders this version does not have. The list covers
several versions, and 1.1.1 holds 17,587 of its 41,414 rows, so every 1.1.1 install read all 304,469 files again:
23827 of the 41414 listed variants are not among the 27576 shaders found, and the narrowed walk costs 2.8 s against
70.6 s for the whole RomFS.
What says the walk fell short is a walk that found next to nothing, which is when the shader directories have moved.
Counting absent list rows does not: for 1.1.1 most of them are absent because the game does not have them.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
Shader preparation reads MacNativeGames' whole shader list history,
release downloads resume from a .part file, appimagetool and the type-2
runtime come from release tags, and the preparation summary counts the
vertex and fragment variants it skips with the graphics pipeline library
off.
The gettid cache in runtime/platform/linux.c conflicted with the same fix
already on dev (8dd7e20, #236); dev's version is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>