The sampler keeps both the DLSS mip bias and pull request #321's anisotropic level; DLAA's pass hook runs after the
contact shadows'; the extension arrays grow for NGX's extensions beside HDR's and the calibrated timestamps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverts dafc35f: free_cores = 1 in totk.ini lifts the virtual core gate again, as in 0.2.8. The mode stays as an
experiment, and every place a player meets it says the game crashes: totk.ini.example, a WARNING line in the start log,
and a line under every crash report and FATAL while the gate is off (kern_free_cores_note), so a log from #212 names
the cause at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
-march=x86-64-v3 kept the port and the installer to CPUs with AVX2 and FMA. --cpu v2 compiles the generated code and the runtime for SSE4.2 instead. Without FMA3 the FP lowering calls fma/fmaf, so runtime/fma.c provides correctly rounded ones (musl, MIT) that honour MXCSR's rounding mode, FTZ and DAZ; the UCRT's software fallback rounds incorrectly by up to half an ulp. simd.h's fast paths keep their assumptions.
The installer's host check asks for x86-64-v2 and selects libtotkrt.a or libtotkrt-v2.a; both release scripts build and ship the pair. The differential tests compile fma.c as well, so a --cflags=-march=x86-64-v2 run tests it.
Tested on an i7-3770K (no AVX2, FMA or BMI) with an RTX 3060 Ti, game 1.4.3: the installer ran end to end, --selftest passed and play holds 40-60 fps at 1080p. fma and fmaf matched 152,288 exact vectors over two seeds, including ties, subnormals and every rounding mode, FTZ and DAZ combination. The v3 build is unchanged: fma.c is an empty translation unit there.
Earlier settings menus wrote free_cores = 1 under the label "Virtual core gate", which promised the gate. Without it a
thread that holds no virtual core reports its ideal core to GetCurrentProcessorNumber, so the game's job workers all
report core 0 and run its per-core code at once. On 1.2.1 two of them add the same per-core NVN control memory, which
retires the command handle the other just recorded, and its CallCommands fails at start (#212); on 1.4.3 the game
corrupts a heap in main+0x82e00 or hangs at the title menu. A player with such a totk.ini crashed at every start and
the menu no longer shows the row.
free_cores is no longer a setting: only TOTK_FREE_CORES in the environment lifts the gate, and a free_cores value in
totk.ini is logged as ignored. The kernel probe asks the kernel whether the gate is on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With hdr = 1 the game's tonemap shader is replaced by one that keeps highlights up to the display's peak, the present
reads the float picture the game copies into its 8-bit window texture, and a compute pass encodes it as PQ in Rec. 2020
for an HDR10 swapchain. Peak, paper white and HUD brightness are live settings in the menu and totk.ini. The approach
follows the RenoDX TotK mod by souperman9 and Musa; no code was copied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each frame the engine sizes its shadow cascades to the area they cover (main+0xcebdf4 in 1.2.1): from 960 down to about
400 near the ground, so leaf shadows turn coarse, and every change of size moves the shadow texels, so they jump instead
of sliding. The Switch does the same; the community mods force a fixed size. The shadow patch set loads the size from
patch page +92 just before the engine rounds it (main+0xcec22c in 1.2.1, 0x683604 in 1.4.3), and the menu's Shadow map size
(shadow_res in totk.ini) chooses it: game, 512, 768, 1024 (default), 1536 or 2048, with the texture heap grown above 960. A write
watch on the size field found the one writer; with the setting, every shadow map in both versions is the fixed size.
recomp/patches.py lists the patch page words in use.
The installer takes the 1.1.1 update since #220, but the README, the installer guide and the tester guide still name 1.2.1
and 1.4.3 alone, so a player on 1.1.1 reads that their update is not supported.
The saves note stays with 1.2.1 and 1.4.3: carrying a save across those two is what has been tested.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
1.1.1 (update 131072) gets its boot constants, expected hashes, the 60 fps
RomFS overlay, its own code patch table, the scene module slot, loader probe
values and shader census lookup, and the setup accepts it. 1.2.1 and 1.4.3
keep every value: the runtime branches on RT_V111, and an install without a
recorded version still falls back to 1.2.1.
1.1.1 has no aspect patch set; outputs other than 16:9 are scaled to the
window on that version.
Fixes#173
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The build knows the player's update as v111: DISPLAY_VERSIONS maps it for the version line of the settings menu, and
boot.c carries its two checkpoint return addresses (0xeb8c14 for SetFocusHandlingMode, 0xebcdec for the first
nvnBootstrapLoader call) beside the 1.2.1 and 1.4.3 ones, with init_array counts of 10668, 45 and 116 for main, subsdk0
and sdk. The build guide lists v111 among the versions every step takes.
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
Conflicts: the known-key and section lists in cfg.c keep both sides; vk_backend.c, vk_device.c and vk_exec_draw.c include platform.h and vk_dlaa.h; create_instance takes the window's instance extensions from gfx_window_vk_extensions as on main, in a 12-entry array for NGX's.
romfs.c keeps dev's note that both game versions now take the layouts of other shapes, next to the Xbox prompts' part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The restart moves into gfx_present.c's gfx_window_closed, which the Win32 and SDL windows share, and linux.c gets
plat_restart and plat_restart_wait: posix_spawn of /proc/self/exe with no descriptor past stderr and the default
signals, and a wait on a pidfd. The prompts code takes plat_file_exists, plat_setenv, strcasecmp and strdup, and the
menu and the log say a game resolution of another shape than 16:9 (16:10 now as well as 21:9) keeps the Switch prompts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
patches-v121.txt takes the aspect set at upstream's 1.2.1 sites (game_patches.c aspect_install): the same two camera
loads and two viewport divisions as 1.4.3, with the same original words and the same replacement from page +56. The
installer now builds the romfs-patches-<w>x<h> overlays for 1.2.1 too; ultrawide_layout.py passes on its
Common.Product.110 at all ten sizes. Checked in game at 3440x1440 (camera 2.3889) and 1920x1200 (1.6000): wider or
taller view, HUD at the corners or edges, no validation errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row opens a confirmation; Restart writes totk.ini, closes the game as Quit game does and starts totk.exe again
with the same command line and environment (plat_restart). The new process waits until the old one is gone before it
moves the log and opens the saves (plat_restart_wait), and the confirmation waits while the game writes a save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ultrawide_layout.py handled canvases wider than 16:9 only, so the Steam Deck's 1280x800 got the 16:10 camera with
the 16:9 HUD stretched 11% over it. A narrower canvas now scales each layout's root pane in y by the aspect over 16/9,
stretches full-screen backgrounds back and moves the HUD to the top and bottom edges. The pane list and distances are
the TALL table of tools/aspect_layouts.py from pull request #60, in the format of the wide edits; the minimap,
discovery banner and dragon's tears keys are found by walking the animation's curves. Every value is checked against
the shipped one before it is written: 1.4.3's Common.Product.140 and 1.2.1's Common.Product.110 pass at 1280x800 and
1920x1200, and the 3440x1440 overlay is byte-identical to the one before.
The settings menu offers 1280x800, 1680x1050, 1920x1200 and 2560x1600, and the installer builds their overlays with the
21:9 and 32:9 ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch forked 79 commits before main and 98 before dev. Resolutions:
1. Aspect ratio: dev's implementation stays (camera patch at page +56 on 1.4.3, tools/ultrawide_layout.py layouts per
size in romfs-patches-<w>x<h>, the aspect = fit|stretch setting). The PR's second implementation is dropped: the
aspect sets of patches-v121.txt and patches-v143.txt (the 1.4.3 one patched the same viewport sites as dev's),
tools/aspect_layouts.py, the resolution.c shapes that limited game resolutions to 16:9, 16:10 and 21:9, and the
picture_fit setting. Its letterbox code (gfx_fit_rect) is kept and reads TOTK_ASPECT.
2. Code dev changed where the PR moved it: the stick dead zone, the test gamepad and the paddles go to input.c; the
DPI awareness, keep-awake and IME detach of gfx_window.c go to gfx_window_win.c; device fault reports and GPU
breadcrumbs to gfx_present.c. gfx_window_dpi gets an SDL version.
3. dev's Win32 calls in shared code go through platform.h: the shader cache pack reader (PlatFile), the romfs
overlay checks, the audio pacing waits, the motion, ASTC and device fault locks. plat_cpu_usable and
plat_commit_info get Linux versions; plat_cpu_count counts the machine's processors on both. dpi_probe.c becomes
dpi_probe_win.c.
4. assume_focus defaults to 1 as the PR has it (a load interrupted by a focus loss can stop for good) and stays live,
with dev's Game tab row.
5. The frame limits 40 and 45 join dev's list. The BC 3D storage fallback for Vega only runs with
TOTK_BLOCK_VIEWS_3D=1, since dev makes 3D BC images without block views by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game pauses whenever its window loses focus, as it does on the Switch when Home is pressed, and ASSUME_FOCUS was the
only way to change that: a known key with no row in the settings table. The runtime reads it at each focus change rather
than once at start, so the row takes effect the next time the window is left, and the build guide says what an unfocused
window now does.
A lift rewrites every generated chunk with the same contents, so a local sccache hits all of their objects and the
compile step costs seconds instead of minutes. build_game.py writes it into the ninja file ahead of cc when the
environment names one; the build guide describes the setting.
tools/ultrawide_layout.py computes every edit from the canvas aspect, so 32:9 needs no new layout data: the installer now builds romfs-patches-3840x1080 and -5120x1440 beside the four 21:9 sizes, and the menu lists both. Before, a 32:9 output_res got the wide camera with the 16:9 HUD stretched over it (issue #181).
SDL does not open the Switch 2 Pro Controller on Windows by itself, so it needs a bridge program. Tested with the
game: hbashton's DS4Windows fork emulating a DualSense gives buttons, rumble, gyro, accelerometer and calibrated
sticks, read directly by the game. Bridges that output a ViGEm DualShock 4 (ProCon2Windows, connectyourpro) give rumble
but frozen motion values, so motion controls do nothing with them. docs/controls.md gets a short section with the log
lines that show a working setup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The installer had English and Russian. installer/text/pt-BR.json covers every id with the same placeholders; the window offers PT-BR beside EN and RU and picks it when the Windows display language is Portuguese (Brazil), LANGID 0x0416; Portugal's Portuguese stays English. make_release.py writes LAUNCHER_*_PT_BR into launcher_text.h and the launcher shows it on the same LANGID. The catalog tests check every window language against English.
The menu had English and Russian. pt-BR gets its own row with every menu id, a Português (Brasil) entry in the menu language list (TOTK_MENU_LANG = pt-BR), and is picked automatically when the Windows display language is pt-BR. The game language pt-BR now maps to this row instead of Portugal's pt, so the software keyboard shows Brazilian text too; pt keeps its row and the English menu. probe_menu_text checks the row is complete, keeps its overlay formats and follows the setting.
The swapped letters are baked into the game's textures, fonts and messages, so a button remapped with a bind_ line or on the Controls tab keeps the old letter on screen. The menu description (English and Russian) and docs/controls.md now say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
romfs-patches-xbox is optional: when make_romfs_patches.py --xbox-prompts fails (a game update whose prompts it does
not recognise), the setup removes the partial folder, warns (warn.xbox_prompts_failed) and finishes, where it stopped
the whole install before. The game then keeps the Switch prompts and the menu says the files are missing. Its log is
prepare-xbox-make_romfs_patches.log, so it no longer replaces the 60 fps run's log, and Prepare no longer counts the
folder as part of a finished step.
The Xbox button prompts section of docs/controls.md sat between the layout list and the controls table it introduces;
it now follows the table. The building.md note follows the paragraph it interrupted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With pad_layout = nintendo on an Xbox pad the right button does Switch A but is labelled B, the bottom one does B but is
labelled A, and the game's prompts still name the Switch buttons. A fourth Button layout choice, Xbox prompts (A right)
(pad_layout = xbox_prompts), maps the buttons as nintendo and swaps the prompts to the labels, so each prompt names the
button to press. Automatic, Nintendo and Xbox are unchanged and keep the game's own prompts. The buttons change at once;
the prompts at the next start, as the game reads its UI archive and fonts at boot (the menu says so).
At start, xbox_prompts loads romfs-patches-xbox in place of romfs-patches (runtime/romfs.c overlay_init).
tools/make_romfs_patches.py --xbox-prompts writes it from the player's own RomFS, with the 60 fps patches; nothing from
the game or a mod is added to the repository. It swaps A with B and X with Y in:
- the letter images Nt_KeyTexA/B/X/Y_00 of the action prompt (DoCommand_00), in the Common archive's __Combined.bntx
(same format, size and tiling, so the image data trades places);
- the action prompt's diamond of the other face buttons: one-letter text panes the game fills from
LayoutMsg/DoCommand_00.msbt in each language's Mals archive (both the messages and the layout's own text);
- the button glyphs U+E040 to U+E043 of scft/External.bfotf in each Font/Font*.bfarc, which every other prompt uses
(CFF outlines and metrics in the deobfuscated OpenType font, then its checksums).
The diamond's shape shows the button's position and stays. The setup writes both folders; the menu notes when the Xbox
prompt files are missing and when the prompts in use differ from the choice until a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wide sizes other than the four the installer prepares get the wide camera with a 16:9 HUD stretched over it. aspect = fit letterboxes a 16:9 game in a wider window where it used to stretch. Ultrawide is 1.4.3 only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SDL reports the back buttons of an Xbox Elite, DualSense Edge or Steam
Controller as four paddle buttons, but the pad table stopped at the
triggers, so they could not be mapped. They are now pad inputs lpaddle1,
rpaddle1, lpaddle2 and rpaddle2, with no default action, bindable from
totk.ini or the remapping rows.