With a DLSS mode the game's own scaling draw covered DLSS's picture with the jittered scene. At a 1280x720 scene and
1920x1080 output the scaling is done by the game's tonemap, not by the FXAA shader vk_dlaa_skip_draw looks for, so no
hash list could catch it. From DLSS's evaluation to the frame's end, passes larger than the light target now sample
DLSS's output in its place (vk_dlaa_swap_img, applied in vk_exec_draw.c tex_info), whichever shader scales.
The motion-vector shader inverted the view-projection in 32-bit floats. With a still camera (identical matrices each
frame) the rounding still gave a few hundredths of a pixel of motion that changed with every jitter step; DLSS
followed it and the whole picture wobbled. mv_pass now makes last frame's view-projection times the inverse of this
frame's in double precision from the uniform snapshot (vk_usnap_host), and the shader only applies it.
Measured on 1.4.3 indoors, still camera, mean per-pixel change between consecutive frames on static areas:
DLSS quality 0.18 -> 0.06, DLAA 0.14 -> 0.05. A camera pan at 10 px per frame shows no ghosting.
While TotK waits for a tag it stops and starts detection several times a second, tens with the menu open: the Amiibo
tab's reader line flipped between ready and searching and the log took two lines per restart. The tab now shows
searching for a second after a stop (amiibo_get_reader_state; the game still reads amiibo_get_device_state), and the
log names the first three restarts, then a count every 200th.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Amiibo tab's folder field took no typing: the menu never passes typed characters to Dear ImGui, so "Open" only
re-read "./amiibo". A missing folder said so at the bottom of the right pane, below its scroll.
"Open" now shows the shell's folder dialog on Windows (IFileOpenDialog on a thread of its own, owned by the game
window) and SDL_ShowOpenFolderDialog on the SDL window thread elsewhere; the tab shows the folder as text and names a
missing one inside the empty list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The DLSS modes already apply only with dlaa on (3de0839), so the DLL check no longer looks at dlaa, and off Windows,
where vk_dlaa.c is no-op stubs, a DLSS mode no longer shrinks the scene. fxaa = 0 names the FXAA shader it skipped,
or reports a minute of frames without it, so a translator change that moves FXAA_FS shows on any GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a DLSS mode (a scene smaller than the output) DLSS writes the scaled picture into the scaling pass's target and
vk_dlaa_skip_draw skips the game's own scaling draw, known by its fragment shader's SPIR-V hash. Translator patch
0011 (the shadow filter spread) changed that hash, so the draw ran again and covered DLSS's picture with the scaled
jittered scene: the whole picture shook by a fraction of a pixel each frame, most visible on lit flat surfaces in
shrines. The FXAA switch (fxaa = 0) stopped working for the same reason.
Add the hash of the current translator, and log once when DLSS scaled a frame whose scaling draw was not found, so
the next translator change that moves the hash shows in the log.
Measured on 1.4.3, Ukouh Shrine, output 3200x1800, dlss = quality, mean absolute change between consecutive frames
with a still camera: 1.40 before, 0.07 after (0.054 with dlaa = 0). Outdoors on stone: 4.29 before, 1.08 after.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A DLSS mode (quality, balanced, performance) shrank the scene to 67, 58 or 50 % of the output and sharpened the
material textures' mip bias to match, even when nvngx_dlss.dll was missing and NGX reported DLSS as not available.
The game's plain scaling then stretched the smaller scene, and the negative bias made textures shimmer in motion.
With dlaa = 1 the scene size now waits on nvngx_dlss.dll next to totk.exe (checked before the device exists, as
the size is decided then) and follows render_scale without it. The mip bias applies only when NGX came up with
DLSS. dlaa = 0 keeps the documented size with the game's scaling, without the bias.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tex_mirrored (vk_texture.c) read t->pool->flags whenever the back end created the host entry of a texture, which can
happen long after nvnTextureInitialize. A game may finalize a memory pool and free the memory the NVNmemoryPool object
lived in while textures from it are still looked up (on a level change, for instance); reading the freed object then
faults. The NVN driver keeps no pointer to the pool either. tex_t now records the pool's flags at Initialize, in the
padding after layout[8], so NVNtexture's size is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Device-paced frames rendered back to back after each period pull (1024
samples on PipeWire, 4-5 frames), before the game's audio thread could
clear the render event or fill the AUX return ring. Frames now stay at
least 4/5 of a frame apart, as the DSP renders one frame every 5 ms on
hardware. This fixes AUX clicks at frame seams (#426) and the progressive
sound loss of #131 (overlapping render notifications 52.7% -> 0.1%).
Linux prefill default raised to 60 ms: at 20 ms PipeWire underran
thousands of times within minutes in busy scenes.
The reverb ring (#421) and advance_voice stepping parts of this change
landed in dev separately (d22a19c, b44caca).
Fixes#131
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TOTK_REC_CHECK=1 searches the packets of the part being recorded for each image, view and buffer vk_memory.c defers or
destroys. A deferral stamped below the part's value, or a destruction of an object a packet names, is logged with the
packet op, both stamps and the GPU's value, and counted by kind and op in a summary at exit. put() zeroes each packet's
room while the check is on: packers reserve room for optional arrays they may leave unwritten, and those words held
handles from the ring's previous lap. TOTK_REC_DELAY_US=N makes the recorder wait N us before each batch, as on a slow
machine. rec_begin takes the part's value for the check. Both are off by default; off, the recorder pays one test per
batch and per packet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_memory.c defer stamped every deferred image, view and buffer with the last submitted timeline value. An object the
replay lets go of while it records a submission can be named by that submission too: vk_texture.c slot_resolve hands a
draw a released entry, and entry_of destroys released entries at that address later in the same submission. The
completion thread then destroyed the object once the GPU reached the earlier value, before the submission naming it
ran, and with the recorder thread behind, before the recorder made the call. The stamp is now the later of the last
submitted value and vk_exec_recording_fence, as LAS Recomp and Savage Wind Recomp stamp their deferrals
(runtime/nvn/vulkan/textures.c defer). TOTK_DEFER_STAMP=0 brings back the old stamp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The asynchronous preemption stub saved and restored YMM0-15 with vmovdqa and ran vzeroupper in inline asm, which
-march=x86-64-v2 does not reach. The v2 runtime library therefore carried VEX code, and a CPU without AVX stopped
with an illegal instruction the first time a core owner was interrupted, a few seconds into boot (issue #454,
Pentium Gold G6400, totk+0xe7a2b50 = kern_ap_stub+0x20). Without __AVX__ the stub now saves XMM0-15 with movdqa into
the same slots; v2 game code keeps nothing in the upper YMM halves. The v3 stub is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The replay marks the start and the end of every render pass and dispatch
(vk_exec.c vk_exec_pass_begin and vk_exec_pass_end, vk_exec_draw.c
op_dispatch and op_dispatch_ind), outside the pass so no pass is broken.
With VK_AMD_buffer_marker the GPU writes the last started and finished mark
into words 2 and 3 of the breadcrumb buffer; with
VK_NV_device_diagnostic_checkpoints the same points are checkpoints, read
with vkGetQueueCheckpointData2NV after the loss. A ring of 4096 records maps
a mark to its submission, index, target formats and size, draw count and the
input ids of the first and last draw's shaders. vk_device_fault_report logs
both marks with their records. The calls go through the recorder thread.
TOTK_PASS_CRUMBS (menu: GPU pass marks): unset, AMD buffer marks only; 1,
also NVIDIA checkpoints, whose extension is enabled only then; 0, none.
The design follows Savage Wind Recomp 3fae40c; the code is ours.
--probe-vkexec gets a pass marks part: pass, dispatch, pass in one
submission; the marks read back after the fence name the last pass and the
report text says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SignalAndModifyByWaitingCountIfEqual with count <= 0 and at least one waiter stored value - 1; Horizon stores
value - 2 (mesosphere KAddressArbiter::SignalAndModifyByWaitingCountIfEqual; yuzu, LAS Recomp and nxnative agree).
The word was already updated with compare-and-swap, as LAS Recomp 1144aea made theirs; the count > 0 values were
right.
--probe-kernel arbiter part expected the old value: it now wants 4 for value 6 with one waiter and count -1, and
4 for two waiters and count 0. Before: 5 for both. After: ok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ours took a pending CancelSynchronization first, before the signalled objects and before the timeout-0 return, so a
poll or a wait on a signalled object used it up and the blocking wait it was meant for ran on. Horizon checks a
signalled object, then timeout 0, then the cancel (mesosphere KSynchronizationObject::Wait; LAS Recomp 1144aea moved
the poll the same way): both keep it pending. A cancel that wakes a blocked wait still ends it cancelled:
CancelSynchronization now wakes it with R_CANCELLED, which the loop tells apart from a signal's -1.
--probe-kernel events part: a cancel sent before a poll and before a wait on a signalled event; each is followed by a
blocking wait with a 500 ms timeout. Before: the poll and the signalled wait returned 0xec01 (cancelled) and the
blocking waits timed out (0xea01). After: timeout, success, then cancelled both times.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_pool_init gave a size-0 pool with storage a record: the host import of 0 bytes failed (the driver refuses the
memory, VK_ERROR_INVALID_EXTERNAL_HANDLE) and the record went into the pool index as the empty range [mem, mem]. A
lookup at that address then found the empty pool before the pool that starts there and reported it unbacked. TotK
makes such pools now and then (MacNativeGames d3407e29, 1.2.1). Such a pool now gets no record, as a GPU_NO_ACCESS
pool; vk_pool_fini finds none and does nothing. Removal by key already kept a neighbour's range safe at Finalize.
--probe-vkexec gains an empty pool part: a zero-byte pool at the start of another, lookups there before and after
its Finalize. It failed before ("a lookup at the start of a pool finds the empty pool there").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The CPU fills these chunks and the zero buffer and never flushes them. On Intel integrated GPUs (ANV on Meteor
Lake) the host-cached memory type that VMA picks for random host access is not coherent, so the GPU read what
an earlier submission had left there. A lighting fragment shader got another draw's UpdateUniformBuffer payload
as its step count (0x3f800000 instead of 96 or 128), looped about a billion times and lost the device; other
stale payloads drew the black frames. Requiring HOST_COHERENT keeps the same memory types on GPUs where host
memory is already coherent.
TotK's terrain shaders fill the gradient registers of a texture-with-derivatives instruction per coordinate (du/dx, du/dy, dv/dx, dv/dy), while the translator takes the first two registers as dPdx and the last two as dPdy. The mip level then came from the wrong derivatives and was too sharp on terrain faces turned across the screen, so patches that followed the faces crawled when the camera moved.
After a shader loads, every two-dimensional gradient pair has its inner components swapped by two new composite constructs, so the shader cache is untouched. TOTK_TXD_TRANSPOSE=0 turns it off. The finding is row 2.13 of docs/maxwell.md.
With dlaa = 0 and dlss = quality left from the menu, the scene still rendered at 67 % and the plain upscaler
stretched it, so the picture looked blurrier with DLSS switched off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
advance_voice computed fraction + seconds * rate * pitch while voice_render adds rate * pitch / 48000 per output sample. The two rounded apart on most frames at 32 kHz and 44.1 kHz, so the voice jumped one sample ahead of what was rendered. audio_voice_consumed now runs the mixer's own loop.
TOTK_AUDIO_DUMP=<path> writes the sink mix before the clamp and logs how many frames were rendered under 1 ms after the previous one; a one-time log line reports the first enabled AUX effect.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The loader asked for E1, the container byte of a plain NDEF tag, so it refused every real amiibo dump as
"Not an amiibo dump". --probe-services now loads a dump with an amiibo header and refuses the same file with E1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
plat_fs_kind served every path through FindFirstFileW, which fails on a path with a trailing separator and reads
wildcards. GetFileAttributesW decides again, as before; only reparse points need the find data's tag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game destroys the nfp activate and deactivate events and attaches the same SystemEventType again before each
detection. kern_bind_system_event kept the first writable handle per guest address and returned early, so the second
Attach left the event destroyed and the game's next TryWaitSystemEvent aborted (issue #398, equipping the Amiibo
power). A kept handle now counts only while the SDK's state byte of the event is nonzero; otherwise the event is
created again and its entry takes the new handle, and a signal to a destroyed event is dropped. probe-services
destroys and attaches both nfp events again and checks that they work.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Linux release builds against the Steam Runtime's glibc 2.31, which lacks that 2.34 call: plat_restart and
plat_spawn stopped the runtime library from compiling. A weak reference uses it when the running glibc has it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
_putenv_s in cfg_probe.c and _stricmp in the menu's key binding row stopped the Linux runtime library from compiling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Brazilian Portuguese and Simplified Chinese setup texts now name the 1.1.0 update beside 1.2.1 and 1.4.3, as the
English and Russian ones do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dev already caches the id; this keeps that and takes the PR's noinline, so a fiber resumed on another thread reads its
own thread's slot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The update this port builds for has version value 0x20000, which is Tears of the Kingdom 1.1.0, not 1.1.1: the upstream expected-v1.1.2.json carries 0x40000 and the other expected files step 0x10000 per release, so 0x20000 is 1.1.0 and 0x30000 is 1.1.1. Pull request #220 introduced the wrong label in expected-v1.1.1.json.
Expected hashes, patch sites, boot constants and the RomFS layout are unchanged; only names change:
- tools/data/expected-v1.1.1.json -> expected-v1.1.0.json, display_version 1.1.0
- recomp/patches-v111.txt -> patches-v110.txt
- installer/layout.py SUPPORTED and tools/build_game.py DISPLAY_VERSIONS
- make_romfs_patches.py --version choices and its COMMON table key (the RomFS archive name stays Common.Product.110)
- runtime RT_V111 -> RT_V110, the inits_111 and expect_111 tables, the probe's census folder v110
- README, docs and the installer texts
Co-authored-by: deepseek-v4.1-flash-1017 <noreply@deepseek.com>
With astc = cpu a large ASTC array decodes to RGBA8 in one staging buffer: the
1024x1024 array of 121 layers with 11 levels takes 645 MiB. On an Intel UHD with
8 GB of shared memory that allocation failed (-2) and the game closed before the
title screen (#347).
upload now fills one staging buffer per part of at most 32 MiB (a single region
larger than that gets its own) and records one copy per part, all in the same
upload batch, which is submitted as before. The parts fit the staging pool's
64 MiB blocks. The GPU ASTC decoder still reads every region from one buffer.
Fixes#347.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mod that patched the game code (.ips, .pchtxt) stayed off as a whole.
tools/exefs_patches.py now reads IPS, IPS32 and IPSwitch files from each
mod's exefs folder and from atmosphere/exefs_patches/<name>/. It keeps the
ones whose build id is main's and turns their writes into main's code into
one patch set per file. The writes go through the same rules as the code
cheats (tools/cheats.py convert). A file that writes main's data, or that the
rules cannot express, is unsupported as a whole. The setup's lift runs it
after cheats.py and writes build-cache/exefs.status.
runtime/mods.c checks each patch file against that status:
- a built file's set is switched on with its mod;
- a file the build lacks keeps the mod off and starts the rebuild at the next
start, like a code cheat does;
- an unsupported file keeps the mod off, and the Mods tab shows the reason;
- a file for another version is counted and left out.
A mod patch on a site of one of the port's own sets turns that set off while
the mod is on, and the Mods tab names it. The Mods tab also gets the "Rebuild
the game now" row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Code cheats need the game lifted and compiled with them. Running the setup
again did that, but it lifted and compiled everything and prepared the
shaders again.
- The setup keeps the generated C and the objects in its temp folder (about
1.3 GB). gen.py rewrites only the chunks whose C changed, so Ninja
recompiles only those. One new code cheat on 1.4.3 took a 47 s lift and
19 s of compile and link on 24 cores.
- Prepare's key no longer follows the compile key, only the runtime, the
translator and the game version, so a rebuild keeps the prepared shaders.
- The cleanup writes build-cache/rebuild.txt, the command that opens the
setup window in a new --rebuild mode on the install folder. That mode runs
at once and starts the game again when it succeeds.
- At start, runtime/cheats.c runs that command and exits when an enabled
mod has code cheats the build lacks (plat_spawn, new for Windows and
Linux). build-cache/rebuild.skip keeps a failed or cancelled rebuild from
starting again for the same cheats. "Rebuild the game now" on the Cheats
tab tries again, and [mods] mods_rebuild = off turns the rebuild off.
Scripted runs never start it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game sizes the buffer for a file from its entry in
System/Resource/ResourceSizeTable.*.rsizetable.zs, so a mod file that grew
could fail to load, and a file a mod added had no entry. With a player mod
enabled, romfs.c restbl_overlay now rebuilds the table at start from:
- the game's table;
- every table of this version that a mod (or the Xbox prompts folder) ships,
where the larger entry wins;
- a mod's table for another version, for that mod's own files only;
- each served mod file: a grown file's entry rises by the growth times its
type's factor, and an added file gets an estimate.
The factors come from the 1.4.3 table measured against its own files (most
types need the size plus at most 8 KiB; bfres 1.5x, bkres 2x, bgyml 3.85x).
The result is served from <profile>/mods/ and takes about 90 ms. A mod's
table no longer counts as a clash with the Xbox prompts. Game entries are
never lowered.
tests/mods_romfs_check.py checks the merged table and now passes probe-fs a
profile of its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A cheat file is now part of a mod: mods/<mod>/cheats/<build id>.txt, or the
Atmosphere places inside the mod folder, the file name in any case. The port
ships no cheat files any more (the MyNXCheats files and their notice row are
gone).
- tools/cheats.py --mods builds the code cheats of every mod folder; a
cheat's key hashes "<mod folder>/<name>", so two mods' cheats of one name
keep their own switches.
- The setup reads the cheats from <install>/mods and writes the status to
build-cache/cheats.status.
- runtime/cheats.c reads the files of the enabled mods the port can use, in
the Mods tab order, and the status from build-cache.
- A mod with only cheats is usable. The Cheats tab groups the cheats by mod,
and the Mods tab says how many cheats a mod brought.
- The cheat texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Merged onto the mods folder (task/mods1); the Cheats tab sits after Mods. The cheats' menu text and the cheat file's
place are reworked for the mods folder in the commits that follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>